Change Title Text
I was hoping someone would know a way that I could change the text in the title of the window my program runs in.
Currently in the contstructor I use:
public MyProg() throws IOException
super("This Program");
}That sets the window title to "This Program"
I would like to change "This Program" on the fly to say somthing else based on what the user does. How can i do this?? Thanks!
If you use a Frame, which is a subclass of Window, you can use setTitle(String)
:-)
Similar Messages
-
I have searched the board for this issue and have not found anything directly on point. I am also so frustrated because it seems like this should be quite simple.
I started putting together a movie several months ago. I got into it again today, and I wanted to change up some text and colors, but I can't change text that is on my title page.
To complicate the matter, when I insert the word "test" in the text editing box, it shows up in the middle of the title screen, but my original text on the screen (left side of a sliding photo) remains the same. It is this text that remains the same that I want to change.
Ideas?
thanksHi emory -
"....part of the problem is there appear to be two places on this title clip where text can show up. One is to the left of the photo box, and another is where text shows up if you choose like "Centered Title"..."
I am afraid you've lost me, there. What do you mean by 'the photo box'? And in your original post, what do you mean by the 'sliding photo'? Was that a Ken Burns pan effect?
How did you create the text which is to the left of this photo box?
In order to test removing the text only, copy the title clip, and do as I described, and see what happens. It should have removed only the unwanted addition to your title clip. Once that has gone, it should be possible to modify the original text (you say you have tried that and it didn't work - does that text appear in the text-editing window? If so, what title option is highlighted? As far as I recall the title called Music Video is the only one that gives you the ability to place text to left or right.)
If that does not work, then try using Delete again, and see if that removes the original text, but still leaving the clip intact. If it does, start from scratch with your text. Remember, you are working with a COPY, not the original:-) -
How to change the text in a browser title bar?
I'm new at flash and I'm finding most things obvious, but
this is one I just can't figure out!
How the dickens do you change the text that shows in, say, an
Internet Explorer window?
Is it by filename? Mine, the index page, currently shows as
the exciting and unprofessional "index"
I've taken over the work from someone else who I'm not able
to contact (I know, that NEVER happens /sarcasm) so I'd appreciate
any help I can get.
Thanks.
Nickandsoitgoes,
> When publishing the flash file, there is an option to
export
> the HTML document along with the flash file.
Yes.
> I see no way to edit the HTML itself. How can I edit the
> HTML template that's published?
Depending on where you specify that file's location (which
you can also
set for the SWF itself), you navigate to that folder, then
edit the
resultant HTML file in whatever text editor you please, from
Notepad/TextMate to Dreamweaver.
If you're asking how to edit the template Flash uses to
generate this
file, you can find that (at least, on Windows) at this
location:
C:\Program Files\Adobe\Adobe Flash CS4\en\First Run\HTML\
Be warned, however, that these template files, though
HTML-based, are
heavily programmed with JavaScript and a number of custom
tokens that get
populated by Flash when it goes through the publish process.
For example,
in the Default.htmll file inside this folder, you'll see a
<title> tag whose
content reads "$TI" (without quotes). Think of that as a
varible. That
gets populated with the the name you've given the FLA file,
simply because
$TI arbitrarily refers to the file name in this scenario. You
can change
this if you like, but if you do, make sure to safe it as a
new file (or at
least back up the original templates that ship with Flash).
> Does that make a bit more sense? :)
Only if I've properly understood your question! If I still
haven't,
please try again. :)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
How to change Font Type of the Title Text of a JFrame?
Hi,
I want to set a different Font Type for the Title text of the titlebar of my JFrame.
Is it possible? Can anyone show me how if it is?
Thanks.
NiteenMichael,
Thanks. It works!
But there was a problem. I was not using the :-
JFrame.setDefaultLookAndFeelDecorated(true);
so I have to use it now.
Is it possible to do it without the default decorated look and feel? Because the default LNF title bar has too much height and I am cramped for space.
I know that's no excuse. I tried but it doesn't work.. I am using a extended JFrame like this:-
class Testing extends JFrame
public Testing()
setSize(300,100);
setLocation(400,200);
Container container = getContentPane();
/* add components to this container here */
setVisible(true);
When I use getComponent() for the container, I get an ArrayIndexOutOfBound Exception.
When I set the argument to getComponent(0), the font in the title bar is not changed.
What else should I do?
Thanks.
Niteen. -
How do you change the color of the title text?
The main title text for the tap your currently on shows up centered one line above the tab row. The default is black text, with a gray drop shadow, but that doesn't work with dark background themes/personas. How do I go about changing that text color so that its visible on a dark background. I've tried changing font stylings in general for the browser, and I've tried changing the color values in the about:config for the persona, but none of that works. How do you change the color of the title text?
That colors option under content doesn't change the color of the title text, but thanks anyways
-
How do I change the text in my titles?
I'm new to FCP X and was wondering if anyone could help direct me....
I am able to change only some of the text in the titles I use but others ...I can't seem to change the text (there's no text box available) ....it's really very fustrating... is there another way around this?
If anyone is available to help me with this problemo it would be very much appreciated, thanksHi Tom, have the same problem but nothing works so far. I have lion mountain and FCPX.
I can not find any text box when using the title templates. Can not change them.
I tried double click in the viewer box. No success.
I tried in the info window, in the tab tex. No success because no text box available
I tried transformation, that I can move the text box which appear in the viewer but can not change the text
The only thing which working is: When I press Control T the basic Text will be included in the clip and there I can change the text. Why this? I do not know.
Can you help me?
Greetings
N. -
Can we change Page Title text size
Hi,
Is it possible to increase the text size of page Title text? Or any alternative to display big size text in that place?
Regards,
RamNot sure what exactly are you looking for, but probably adding an image of horizontal line might solve your issue.
--Shiv -
How to change Alt text for the Popup Key LOV Image in Apex 3.2.1.00.10
we are using Application Express version is 3.2.1.00.10
There is an icon to click on to popup the lov search box, the alt text for that image is currently "popup Lov"
would it be possible to change the text to something more meaningfull e.g. "Lookup Person name" or "search Directory for Person names" .
I have tried by updaing them
from
Shared Components>Templates> Popup List of Values Template > Popup Icon Attr --> width="13" height="13" alt="Popup Lov"
(under Popup List of Values)
to
alt="#CURRENT_ITEM_NAME#"
it didn't work.
your respone will help getting accessability sign offVenu,
Try adding title = "Lookup Person name" to the Image Attributes of your icon or button.
Jeff -
Not able to make change of text in text symbol which are stored in txt pool
Hi Experts,
I have new problem today. I have been told to make changes of header text which is displayed after running one customized program.
Program name : ZSDXXXXX1 which is attached in one Tcode: ZSDXX2.But when I goto SE38 and display the program to make changes, it shows the following different report name like AQCSSYSTQV000009ZSDXXXXX1 and the text symbols text-f58 which are somewhat different.
Pls gide me to proceed further...
In SE38:
report AQCSSYSTQV000009ZSDXXXXX1
line-size 253 no standard page heading line-count 000(003).
include <symbol>.
include <icon>.
selection-screen: begin of block prog
with frame title text-f58.
tables LIKP.
data %count-LIKP(4) type x.
data %linr-LIKP(2).
tables aqldb.
include rsaqexcd.
data: begin of %st_liste occurs 100,
head(1),
tab(3),
line(6) type n,
cont(1) type n,
fint(1),
finv(1),
fcol(1) type n,
text(0253),
end of %st_liste.
etc.As per the report name "AQCSSYSTQV000009ZSDXXXXX1", it seems that there will be a SAP Infoset "ZSDXXXXX1"
Go to transaction SQ02 with this infoset name "ZSDXXXXX1" then press change button.
Then on right hand side there witll be field groups/data fields. Select the folder corresponding to Text-F58 and then press change button .
If it does not work try transaction SQ01 & SQ03.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 11, 2008 4:29 PM -
How do i change the text in a submenu diffrent than the page name? I want it wrap into two lines or be a diffrent title but i can't figure out how to make any changes to the text.
Hello,
Text in Menu/Submenu canno tbe changed while using menu widget. However, if you use the Manual Menu option, then you can create your own Menu and add the hyperlinks according to your requirement.
To create Manual Menu, please follow the steps below :
1) In the Widget palette, go to "Menus" click and drag "Vertical/Hrizontal" into your artboard/workspace
2) Click on the widget itself to a blue arrow appears to the right
3) There is a drop down called "Menu Type" set it to "Manual" (as shown in screenshot) :
4) Now You can create your own Menu and add your own text and hyperlink to this Menu.
Hope this helps.
Regards,
Sachin -
How to change the text for the tabs of a tabstrip control dynamically
Hi Guys,
I am having two screens in a transaction.
1. 1st screen has material number as an input and submit push button
2. 2nd screen has two tabs in a tabstrip control.
I want to display material description and plant number as heading for the two tabs based on the material number entered by the user in the 1st screen. Means i want to change the text dynamically. Is there any possible way? If it is there please help me. Very urgent...
Thanks in advance
James.Hi,
If you set the "Output field" attribute for a pushbutton/tab, you can also set its text dynamically in the ABAP program. To do this, you must create a field in the ABAP program with the same name as the pushbutton/tab. You must then assign the required text to the field before the screen is displayed.
For example define a global field in your program called MATNUM(20) and use this as the name for the material number tab on the tabstrip. Then you can assign a text MATNUM = 'Material Number' and this will appear as the tab title. Don;t forget to set the "Output field" attribute on the tab.
Hope it helps -
How to change the text of item's displaying in the folowing ALV.
Hi Experts,
I want to change the text of item's displaying in the folowing ALV.
Go to ME23N->Click 'Messages'->Click 'Further Data' -> Click 'Displ.Originals'.
Here one small ALV grid is appearing.
Currently it is showing same name's under the 'Title' column of that ALV. My requirement is to change the text coming under the column 'Title' in that display.
Can any one throw some light in the issue.
Thanks&Regards,
AnvershaHi Anversha ,
i think you need to use Enhancement point for it.
check the program DV70AF0A-->ARCHIV_ANZEIGE(Subtoutine).
i had similar kind of requirement ,while attaching the supporting documents to FI document , i need to update title field with File name , so i used EP and BADI to do so.
regards
Prabhu -
How to change the text of customer tab in Me23n
Hi
I have added new customer tab in Me23n at item level.
Its text is Customer Data.
I would like to change to some other text.
How to change the text of customer tab in Me23n
Regards
AmrutaAmruta,
I had the same query today and finally found the answer.
In order to change the title text or description of the "Customer Data" tab in ME23N, etc. you need to define a new text symbol in program SAPLXM06. The text symbol must be number 111 for the PO data. Make sure you define this text symbol in the language you are using when viewing the PO. I had issues with this as the original language of object SAPXM06 is not my logon language.
The standard code which picks up this text is in function module MEGUI_BUILD_PO_ITEM_PLUGIN. I could not find any documentation around this functionality.
Hope this helps!
Ben -
How to change the text variables for a standard report-writer report ?
I am trying to change the text variables for a report -writer report and transport the same so as to change the title page and the report output heading .I know the Report-Group 6Z02 and the library 6O1 to which it belongs.I tried using the change transaction GR32 after going to the area menu through FGRP . I try to change the text variables through but it throws an error "You chose a name in the reserved name range - try different name ".
I have also tried copying this report into another report and changing the new report . I was able to change and save the text variables . Now when I try to overwrite the original report 6Z02-001 with this new report , it does not allow that.
Let me know how I can change the text variables for the sameCan anyone please suggest me what to do here ?
-
How to Change Column text of Iview HCM Process Overview
ECC Ehp4 sps7
Portal 7.01 sps7
Please Help,
I am trying to globally personalize the Copy of the Iview HCM Process Overview . The column texts have titles such as Object Type and Object Key. I want to rename them Person ID etc.
I was able to "Hide" some columns in the Iview but when I change the text in the "Settings for Current Configuration" it does not Appy or change the Display.
I am in the Portal Content Administrator, with Admin priveledges. I am opening the Iview objecyt then using Preview.
I then Right cntl click to bring up the Settings for Current Configuration. I am looking at the View UI Element Tree and opening the Grouping of UI Elements. I see the text for the column "Object Key" I change the text but when I save it does not change the Iview text. When I open the "Settings for Current Configuration again the changed text is still there but the Iview has not changed
Any help on this matter would be appreciated.
thank you,
SarahYes,
I have opened the Role object, edited the Work Overview Page inside the role, selected / clicked on the Iview HCM Process Overview, opened the IView HCM Process Overview, previewed it, cntl right click for Settings for current configuration,
Selected the UI Element "Object Type" TEXT and made my changes
Sarah
Maybe you are looking for
-
HR DB table to find out PERNER using first or last name of the person
Hi all, just wanted to know from which HR DB table we can find the Personal number by passing First name or last name of the person. Thanks in advance, Vithal
-
T7700 vs. P7800... which one should I buy???
I read in an old thread that one is better for games and the other is better for movies... but I watch movies and play games equally, so which one do you recommend me?
-
External services po for resources need information till ML81N, MIRO etc.
hi all, Looking for external services po for resources need information till ML81N, MIRO. Even HR personnal number PA 30, CAT2, CATM required for smooth flow. Internally for this HR tcodes WBS element Activity number is also involved. Thanks in adv
-
I have made an animation, how do I change a gif to an Mv4.
I have made a short animation, how do I change a gif to an Mv4 so I can upload it to make an e-book
-
No. of child Items should be printed with the parent item at row level
Hi.. that the number of the child Items should be printed on A/R Invoice along with the parent Item at row level. I want to know whether this is possible through PLD or not . if yes, please let me know how ? Regards Rakhi Edited by: Rakhiatsap on Jul