Change volume and Balance of speaker using Clip interface

Hello,
I am playing more than one Clip simulteniously. I want to change the volume and balance of individual Clip so that they have individual effect on speaker. I mean, if there are two clip then one should have high sound and other have low like that.
Any help would be appreciated.
Thanks in Advance.

Hello,
I play a sound using Clip interface in Java Sound. i am able to get FloatControl.Type.MASTER_GAIN) control but not FloatControl.Type.PAN)
I have written a code like this,
FloatControl gainControl = (FloatControl) clip.getControl(FloatControl.Type.PAN);
Any help would be appreciated.
* Thanks In advance*

Similar Messages

FCPX Project Render Settings - Can you edit in h.264 and Transcode/render only used clips on timeline to Prores during render?

I have a question on the PROJECT RENDER settings in FCP X. It’s seems to me that one could theoretically import and edit entirely with original h.264 video files without needing to Transcode to ProRes422. Once you’re done with your edit and want to get the added benefits of COLOR GRADING in ProRes422 color space, it seems that FCPX will automatically render your edit in ProRes422 according to these preferences. In that case, a color grade could be applied to the whole edit, and be automatically transcoded/rendered into ProRes 422 during the render process. After rendering, what would show up on the viewer and what would EXPORT would be the rendered Prores files and not the original h.264 files. This saves a lot of time and space of transcoding ALL your media, and in theory should enable you to edit NATIVE video formats like h.264, with automatic benefits of ProRes during render. I'm assuming the render may take longer because FCPX is having to convert h.264 video files to ProRes422 while rendering. This may be one drawback. But will you your color grade actually use the 4:2:0 color space of the h.264 native media, or will it utilize 4:2:2 color space, since the render files are set to render to ProRes422 ? Can anyone please confirm that this theory is correct and optimal for certain work flows?? Thanks!

Thanks Wild. That's what I thought - in that the render files would be converted to ProRes422 codec. So do you or anyone else think that there is an advantage to having the 4:2:0 original file be processed in a 4:2:2 color space?
Yes there is an advantage, any effects and grading will look better than in a 4:2:0 space.
Most professionals online seem to think so. Also - will rendering of heavy effects and color grading take longer using this method because it's having to convert h.264 media to ProRes during render?
Yes, it will definitely take longer.
Can anyone verify from a technical standpoint whether editing and color grading in this workflow will see the same benefits as having transcoded the h.264 media to ProRes in the first place?
Same benefits from a final product view point, you lose on rendering time though and if you have lots of effects things will seem slow as it will have render everytime from the h264 file rather than a Pro Res file for every change you make. This may be fine on a higher end mac but I'm sure just pummels an older lower end mac as to being almost useless.

Changed number and facetime is still using old number

I added a 3rd line/iphone to my AT&T account. When i bought the iphone at the apple store I asked for a 626 area code but was told the only option I had was a 312 area code. I then called AT&T to try to change the number to a 626 number but was told I couldn't add a line from a different market to my account. So I transferred the line to a second account by itself in order to get a 626 area code for my nephew. Now that iphone will not allow me to facetime it using the 626 area code which is the iphone's number now. I have to facetime the old 312 number in order to connect to it, but that number was canceled minutes after i purchased the iphone. And when my nephew facetimes me, my iphone displays the old 312 number. When I try to facetime him I get a "facetime failed" error message. iphone has been restored and has 4.1. Phone number under phone settings has been changed to the correct 626 one. Can't think of anything else. Anyone experiencing the same problem? Thanks
~R

I downloaded the facetime app. I have it going through my email address. Now my wife has Iphone 4. When we first bought her phone, ATT gave her a dumby number for the reason of switching from another carrier. After her contract was up, we ported her number to the iphone. Dumping the other number for her orignal.
So when I tried facetime by calling her phone it would not connect. I was puzzled. I tried it a few more times and still nothing. I decided to take her phone and call me and it worked. I was confused when another number showed up. After pondering this for some time, I then noticed the number was the dumby number ATT gave her. This number was dumped 2 1/2 months ago.
Now I know facetime for Mac is just a beta version, but does anyone have an idea * is going on here?

Macbook pro keeps changing volume and starting music from itunes on its own.

Have I got a virus, or is this some kind of poltergiest situation? SEND HELP.

This is not a virus. Sounds like there's an Apple remote being used in the vicinity of the computer, and it's picking up the signal. If you have an Apple TV, note that the Apple TV remote can also control your MacBook Pro in the manner you describe.
I had a similar situation myself... turned out to be my 2-year-old playing with my Apple remote.

IDOC to PDF and XML via EMail: using InputAttachment interface in mapping

Hello Together,
I am working on the following scenario:
IDOC --> Transformation Nr. 1 IDOC-XML; Transformation Nr.2 XML- PDF --> Email with 2 Attachments XML and PDF.
Till now Iu2019ve managed "IDOC to Email" with XML-Attachment. Therefore I used MailPackage and SwapBean. Unfortunately I didnu2019t see any possibility to send PDF attachment with MailPackage approach.
Thatu2019s why I decided to change the scenario in this way to avoid using of MailPackage:
u2022 first step: IDOC to FTP (2 XML files)
u2022 second step: FTP (1. file = payload + 2. file= attachment) to Email with one XML-attachment
It works without MailPackage, but I still need the PDF-attachment. In the moment I am trying to read the XML-attachment, to transform XML2PDF and to add the second attachment to the message inside of mapping . I use InputAttachment and OutputAttachment interfaces.
http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/aii/mapping/api/InputAttachments.html
Unfortunately the reading of the XML-attachment with u201CInputAttachementu201D interface inside of mapping doesnu2019t work. Tracing says: "there is no attachment".
So my questions are:
1. Is it possible to work with Input- and OutputAttachement interfaces inside of mapping? Or does it work only inside of adapter module?
2. If it works inside of mapping, how can I test it in design time?
If you see any other way to solve my problem, let me know please.
Thank you a lot, regards Anna

Question Nr. 1:
"... Mapping programs are executed in the Java part of SAP NetWeaver AS. Consequently, the mapping runtime transfers the message payload from the ABAP part of the SAP NetWeaver Application Server to the Java part before the mapping program is executed. Since mapping programs do not usually access any MIME attachments in a message, the default setting is for the mapping runtime to transfer the payload only and not the attachments. This applies for both attachments that are removed as part of MTOM optimization in the Web services runtime, as well as for attachments that a sender sends together with a payload by using proxy methods in the XI runtime.
If you want to access an attachment from a mapping program, it must have been transferred from the ABAP part to the Java part prior to execution. You can configure this in the basic settings of the operation mapping in which you reference the mapping program (select the Read Attachments checkbox)..."

VPN hub and spoke topology, hub using two interfaces

Hi,
I'm facing a problem with Cisco ASA 5500 running software 8.4.
I know, i know, VPN hub and spoke was already discussed many times. But all these discussions are about a hub using only one interface, the outside/public interfcae.
My topology is slightly different.
LAN-A - VPN peer A <--> (Internet) <--> (outside if)-ASA-B-(inside if) <--> (corporate network) <--> (outside if)-ASA-C-(inside if) <--> LAN-C
VPN communication should flow between LAN-A and LAN-C.
Phase I and phase II are working on both tunnels (A-B, B-C). Therefore cryptomaps should be right.
IPsec SA for tunnel A-B is explicit for LAN-A and LAN-C.
IPsec SA for tunnel B-C connects any with LAN-C.
What I can see on ASA-B is incoming traffic from LAN-A on tunnel A-B.
That does not trigger an SA for tunnel B-C!
Traffic initiated from LAN-C, I can see on ASA-B as incoming traffic, SA for LAN-A to LAN-C is build up on tunnel B-C.
Traffic seems to enter tunnel A-B as I can see outgoing traffic on ASA-B.
Of course, NAT exemption is configured for traffic between LAN-A and LAN-C.
Why doesn't incoming traffic from LAN-A initiate SA on tunnel B-C?
It looks like incoming traffic from LAN-A enters ASA-B and is dropped or send anywhere but the right direction.
I admit I'm clueless.
Any help would be appreciated.
Thanks folks.

Analyzing the config files you revealed the inactiv NAT exemption for traffic flow between LAN-A and LAN-C.
Furthermore a static route fro LAN-C out the inside interface was missing.
Fixing both communication works fine.
Thanks for the real good support.

How do you change volume permissions with Solaris Volume Manager?

(Previously posted in "Talk to the Sysop" - no replies)
I'm trying to set up Solaris 9 to run Oracle on raw partitions. I have my design nailed down and I have built all the raw partitions I need as soft partitions on top of RAID 1 volumes. All this is built using Solaris Volume Manager (SVM).
However, all the partitions are still owned by root. Before I can create my Oracle database, I need to change the owner of the Oracle partitions to oracle:oinstall. The only reference I found telling me how to do this was in a Sun Blueprint and it essentially said "You can't change volume permissions directly or permanently using SVM and chown will only remain effective until the next reboot. To make the changes permanent, you must modify /etc/minor_perm". Unfortunately, I can't find an example of how to do this anywhere and the online man pages are not particularly helpful (at least not to me).
I'd appreciate a quick pointer, either to a good online resource or, even better, a simple example. For background, the volumes Oracle needs to own are:
/dev/md/rdsk/d101-109
/dev/md/rdsk/d201-203
/dev/md/rdsk/d301-303
/dev/md/rdsk/d401-403
/dev/md/rdsk/d501-505
I provide this information because I'd like to assign some, but not all, of the devices under /dev/md/rdsk to the oracle user and I was hoping some smart person out there could illustrate an approach using simle regular expressions, at which I'm horribly poor.
Thanks in advance,
Adrian

Ron, I feel your pain. I just came from an HTC also and a lot of stuff with this iPhone is bugging the crap out of me. Who makes a phone where you can't adjust the ringer and alert volumes independently? Instead, I have to adjust the alert volume when it is active. C'mon guys. Get with the program. You won a bunch of Android users over with the 4S, but you're going to chase us all back when we're done with our contract. Frustrating.

Understanding replica volume and recovery point volume usage with SQL Express Full Backup

I am running some trials to test DPM 2012 R2's suitability for protection a set of SQL Server databases and I am trying to understand what happens when I create a recovery point with Express Full Backup.
The databases use simple recovery model and in the tests I have made so far I have loaded more data into the databases between recovery points since that will be a typical scenario - the databases will grow over time. The database files are set to autogrowth
by 10%
I have been looking at the change in USED space in the replica volume and in the recovery point volume after new recovery points and have a hard time understanding it.
After the first test where data was loaded into the database and an Express Full Backup recovery point was created, I saw an increase in used space in the replica volume of 85 Gb and 29 GB in the recovery point volume. That is somewhat more than I think
the database grew (I realize that should have monitored that, but did not), but anyway it is not completely far out.
In the next test I did the same thing except I loaded twice as much data into the database.
Here is where it gets odd: This causes zero increased usage in the replica volume and 33 GB increased use in the recovery point volume.
I do not understand why the replica volume use increases with some recovery points and not with others.
Note that I am only discussing increased usage in the volumes - not actual volume growth. The volumes are still their original size.
I have been using 3-4 days on the test and the retention period is set to 12 days, so nothing should be expired yet.

Hi,
The replica volume usage represents the physical database file(s) size. The database file size on the replica should be equal to the database file size on the protected server. This is both .mdf and .ldf files. If when you load data
into the database and you overwrite current tables versus adding new ones, or if there is white space in the database files and the load simply uses that white space, then there will not be any increase in the file size, so there will not be any increase
in the replica used space.
The recovery point volume will only contain delta changes applied to the database files. As the changed blocks overwrite the files on the replica during express full backup, VSS (volsnap.sys) driver copies the old blocks about to be overwritten
to the recovery point volume before allowing the change to be applied to the file on the replica.
Hope this helps explain what you are seeing.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Filling of mara-volum and -voleh within BAPI_MATERIAL_SAVEDATA

I like to update mara-volum and mara-voleh by using BAPI_MATERIAL_SAVEDATA, but these fields are not available in structure BAPI_MARA, only in structure BAPI_MARM.
Please let me know how to solve this problem.

I put the relevant data into UNITSOFMEASURE (alt_unit, volume and volumeunit: structure BAPI-MARM) and also into UNITSOFMEASUREX (structure: BAPI-MARMX), but the result after calling BAPI_MATERIAL_SAVEDATA is negative: no update(s) in tables MARA and MARM (no errors in return) !!!
Do you have any idea what I did wrong .....

Volume and pan

So i am working on a widget and I cant seem to get the volume
and balance sliders to work right. Can someone take a look at my
code and see if you know what going wrong. The web address of the
widget is www.buttonbeats.com/sequence.html . The only slider that
works is the first one for now. Till i figure out why this one wont
work. and the action script is below.

ok so things are now working except that the volume slider
works upside down. Could you take a look and let me know how I can
flip the volume slider upside down. the swf is located
www.buttonbeats.com/sequence.swf
var myvolumebounds:Rectangle=new Rectangle(volumegroove_mc.x,
volumegroove_mc.y, 1, volumegroove_mc.height);
var mybalancebounds:Rectangle=new
Rectangle(balancegroove_mc.x, balancegroove_mc.y,
balancegroove_mc.width, 1);
volume_mc.addEventListener(MouseEvent.MOUSE_DOWN,
startdragvolume);
//volume_mc.addEventListener(MouseEvent.MOUSE_OUT, stopdrag);
volume_mc.addEventListener(MouseEvent.MOUSE_UP, stopdrag);
balance_mc.addEventListener(MouseEvent.MOUSE_DOWN,
startdragbalance);
//balance_mc.addEventListener(MouseEvent.MOUSE_OUT,
stopdrag);
balance_mc.addEventListener(MouseEvent.MOUSE_UP, stopdrag);
function startdragvolume(myevent:MouseEvent):void{
myevent.target.startDrag(false, myvolumebounds);
function startdragbalance(myevent:MouseEvent):void{
myevent.target.startDrag(false, mybalancebounds);
function stopdrag(myevent:MouseEvent):void{
myevent.target.stopDrag();
var myRequest:URLRequest=new URLRequest ("inst.mp3");
var mySound:Sound = new Sound();
var myChannel:SoundChannel;
var newSetting:SoundTransform = new SoundTransform();
mySound.load(myRequest);
myChannel=mySound.play();
stage.addEventListener(Event.ENTER_FRAME, everyframe);
function everyframe(myevent:Event):void{
var newvolume:Number = (volume_mc.y-volumegroove_mc.y)/100;
var newbalance:Number =
((balance_mc.x-balancegroove_mc.x)/27)-1;
trace (newbalance);
newSetting.volume=newvolume;
newSetting.pan=newbalance;
myChannel.soundTransform=newSetting;
stage.addEventListener(Event.ENTER_FRAME, everyframe2);
function everyframe2(event:Event):void {
leftbar.scaleY=(myChannel.leftPeak);
rightbar.scaleY=(myChannel.rightPeak);

I can't use up my store credit balance. I want to change my store to redeem a gift from a friend in the Norwegian store, but it says that I'm unable to do so because I'm in the American one, and I have to use up all my credit before I can change. Help?

I want to change my store to redeem a gift from a friend in the Norwegian store, but it says that I'm unable to do so because I'm in the American one, and I have to use up all my credit before I can change. How do I use up all my credit when I have $0.54?

You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I want to change the cantry because I used us voucher and now the remanding only 0.05 and now I want use my Saudi credit card but give massage I have to finish the balance and nothing I can by by this amount I need to remove the balance to change the city

I want to change the cantry because I used us voucher and now the remanding only 0.05 and now I want use my Saudi credit card but give massage I have to finish the balance and nothing I can by by this amount I need to remove the balance to change the city

Click here and ask the iTunes Store staff to zero your account balance.
(105215)

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs. This has always worked for me until now. I have not changed any settings

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs. This has always worked for me until now. As far as i know, i have not changed any settings. This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.

HT5312 I need to change my security email. My wives email is on file and she does not use it anymore

How can I get security email adress changed? My wives work email is on file but she no longer uses it

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

I have always used Nero wav editor to add eq, add volume and noralize recordings....do I have that feature in premier elements? and if so, where do I find it?

I have always used Nero wav editor to add eq, add volume and noralize recordings....do I have that feature in premier elements? and if so, where do I find it?

Zillenwater said: You can export a FLIP video clip using Picasa 3, and then bring it into Premiere Elements. The video and audio will successfully come in.
Thanks much - this worked very well and was so easy. After spending hours looking at a lot of different converters and getting nowhere, I spotted this solution.
I used Flip avi files directly from the camera, copied them into a folder that Picasa 3 could find, and then exported them. They showed up in my /My Documents/My Pictures/Picasa/Exported Videos folder as Windows Media Files (.wmv). I brought my test files into Premiere Pro 1.5, previewed them, placed them in the timeline and rendered them. they looked good here, so I exported my movie and the video looks pretty good, considering it was from the Flip.
Picasa did something that a dozen other conversion programs couldn't get right (or at least I couldn't find the right combination of codecs and settings). It's a relief, alright, and information I'm happy to share.

Change volume and Balance of speaker using Clip interface

Similar Messages

Maybe you are looking for