Changing Field Labels texts: What happens after Upgrade?

Hi All,
my client would like to change some field label text of domains.
The question I have is, what will happen after change of release? Will the texts be overwritten? And all have to be maintained again?
Will I know which ones have been overwritten (SPAU)?
Any comment, suggestion, experience?
Thanks in advance!
thomas

Hello,
Guess your question refers to field label texts of datatyps - because domains have only the technical data definition. Anyway - all modifications of Data Dictionary elements ( domains, datatyps, tables) are handled by transaction SPDD during upgrades. The difference to transaction SPAU is, that transaction SPDD is used during the upgrade - after the 'Test'-phase and before the 'Import'-phase.
Have a look on the documentation of SPDD- it's quite good.
Regards Wolfgang

Similar Messages

User exit to change Field labels( text) in VT01N

Dear all,
I have a requirement to change the Screen name of External ID1 ans External ID2 in identification tab to Seal and Trail. Is ther a user-exit to do this.
useful answers will be rewarded
Thanks
J

Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
Execute the report, give the transaction you want to find user exit, and query( press f8 ).
If no appropriate exit is available you can go for badi's.
To search for a badi, go to se 24 display class cl_exithandler.
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable exit_name. It would show the available badi's.
Hope this helps
if it helped, you can acknowledge the same by rewarding
Regards
Dinesh

I usually have my music on shuffle but since playing just one album it now will not shuffle all. Shuffle and shuffle all do exactly the same with no differences. Seems to have happened after upgrade

I usually play my music on Shuffle all, but having played just one of my albums it will not now shuffle all. Shuffle and shuffle all do exactly the same thing - no change. Seems to have happened after upgrade. Please advise

There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

What happens after 20 months of EDGE if no upgrade?

What happens after 20 months of EDGE? Does the service discount remain if you don't upgrade to a new phone? Or does the service price increase even though you don't have an EDGE payment to end up the same amount anyway?

mrhelper: What else do you know about he month2month discount? I'm currently on a similar edge program but with 2 lines. I still have about 16 more payments left on the edge phones, but I have no intention of upgrading or do another Edge program afterwards. I believe the Verizon Reps told me that I would indeed keep my $25 discount off the access lines when I originally signed up for it, but if that's not the case, where did you hear about that month2month program and what are the details of it?
Thanks in advance for your help.

How to change the field label text in standard WD application

Hello All,
I have a requirement to change the filed label text in standard WebDynpro application.
Application Name: /SAPSRM/WDC_UI_DO_BIDDER
View: V_DO_BIDDER_SEARCH_C
I want to change the label text from "Last Name" to "Vendor Name".
Can anyone please provide me the possible options to change label text?
Thanks in Advance.
Regards,
Shyam

Thread closed...Found the solution ...

Change field label for field IZWEK in transaction AS03

Hi experts,
I would like change field label for field IZWEK because I want use it for another purposes. Itu2019s name is Investment Reason at transaction as03.I can change name this label in reports by using se63(translation->abap object->short text->repository text->data element) and giving object name as IZWEK. I get changes in reports only, in help(F1). But I havenu2019t idea what cause change label in as03 transaction.
Help me please.
Regds Stenwa

in tr. AOLK and AOLA you can change this.

Changing Field Labels of module pool screen dynamically

Hi All,
Can anybody tell me how to change field label of text field in dialog screen dynamically.
The Screen/Transaction is standard one.
I have created a Enhancement point for this change in one of PBO module's subroutine for this screen.
This Field label is defined as a 'Text' field only. We can't change it any more as it is standard one.
Can anybody tell me the solution for the same.
I have to change this label value as per some validations and its corresponding text field value will remain as is.
Thanks,
Deep.

Hello,
I think it is not possible, but try changing the name by Looping on screen table on PBO,
Bye
Gabriel

Changing field labels

I need to change the description of three fields, VKBUR, VKGRP and BZIRK so that the terminolgy aligns iteself with our business processes.
I have used SE80 to modify the Data Elements descriptions, short, mid and long. I have registered the change through SAP.
The changes have been activated. Though the log reported that a number of tables could not be modified because the enhancement category for some obscure tables was missing. Most of the tables were adjusted.
Viewing transaction VA22 - Quotations the sales header screen has the correct new description for only one of the three fields! Why this should be one of three is a mystery.
I think that the structure DD04D is filled with the short, mid and long descriptions.
Any ideas?

Hi Nigel,
You can change field labels, in tx CMOD->Go to->Text Enhancements-> Keyword->Change.
Here you can enter the Data Element of the field you want to change the text, and the language. Also, you should look at the screen where the text field is. Because if the text has the attribute "Modify" to "F" (Fixed), you cannot modify this text.
Thanks
Warm Regards,
Mohammed Hussain.

HT4113 what happens after the iphone is at iphone disabled wait 60 mins

what happens after the iphone is at disabled wait 60 mins

Apple will continue to have service replacements for the iPhone 5 for a long time to come. So if you go to Apple for an exchange, you'll get the same model of iPhone that you turn in. You will not get a 5C.
As to the price change, there may be nothing to be done, but if you wanted to get the iPhone replaced but that the Genius could not or would not do the replacement at that time, talk to the manager of the Apple Store, explain that you were in and reported the problem before the price increase but could not get a replacement then. Perhaps they'll be able to do something for you. If it was your choice not to replace the iPhone, though, then you're probably stuck, just as with any product price increase when you previously elected not to purchase.
Regards.

How to change a labels text which created at runtime?

hi,
i am creating label controls in runtime dynamically and adding them to a group component. this group component is in another custom component and i have lots of custom comp. in my app.
my question is how can access (via id) and change a labels text whict created at runtime?
i can change like this but i am setting id's and want to reach via id.
var lbl:mx.controls.Label = mx.controls.Label(subMenu5.group_subMenu5.getElementAt(1));
lbl.text = "good job";
thank you, have a good day.

First off, if you are already using a Spark Group, I would suggest you use a Spark Label instead of an MX Label. If you want to reference the Labels from the group, loop through the group's elements and check the if the element id matches the Label you want to assign text to.
var lbl:Label;
var n:int = myGroup.numElements;
for (var i:int = 0; i < n; i++)
 lbl = myGroup.getElementAt(i) as Label;
 if (lbl && lbl.id == "myLabel")
 lbl.text = "newText";

Can't change the label text for the first time of loading

I have some problem to change the label text in the prerender method.
I put a label on the form and set the text value to "Customer" on the text properities , and I would like to change the lable text to "Supplier" in the prerender method, I found some strange behaviour.
If I type nothing on the label text of the properties , I can change the lable text on the prerender method on the first time of the form load .
If I put something on the label text of the properties , the text label can't be changed on the first time of form loaded, the lable can be changed if I refresh the form or reload the form.
Could anyone help me to solve this kinds of problem ?
Thanks

This is a tough one to explain. Here is one explanation from the Delving Into Components tutorial:
As with the JavaServer Pages implementation, when the server constructs a page from JSP source, the tag attribute settings in the JSP source take precedence over runtime settings. For example, if you set the text property for a Static Text component to "moon," the IDE adds text="moon" to the Static Text component's tag in the JSP file. Even if the page's prerender method has a staticText1.setText("sun") statement, the Static Text component shows "moon" when the application renders the page. If the page is rerendered, the staticText1.setText("sun") statement takes affect and the Static Text component shows "sun." If you visit another page and come back, the server once again constructs the page from the JSP source, the values set in the JSP tag attributes take precedence, and the page displays "moon."

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

What Happens After Launch

This is question that i have for anyone that has launch an app store application in any conpacity. My question is what happens after launch. Where the best ways to get your application in the hands of people that will bring attention to your app? How do you get your app review by the zine writing articles about apps. How are writing articles about apps? What ways have people found success in advertising your app if you not selling a game?

Sign in, activation, or connection errors | CS5.5 and later
For anything beyond that you will have to provide proper technical information.
Mylenium

Change Icon Label Text Color

So, I wanted to change the Finder Window background color to black. But when I do so, the text for the labels of the icons become un-readable. See picture.
So I wanted to change the Label Text to white or some other lighter color. I'm surprised Mac OS X did not do it automatically. How do I change it?

AFAIK, you can't. All I can suggest is use one of Apple's Desktop pictures and be done with it.

What happens after a year's usage? Will I not be able to access the application anymore?

What happens after a year's usage? Will I not be able to access the application anymore?

You can still purchase CS6 products for the time being:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

Changing Field Labels texts: What happens after Upgrade?

Similar Messages

Maybe you are looking for