Changing hostname in asa cluster
Hi,
I have 2 cisco asa 5540's configured in active/standby mode. I need to change the hostname and domain name as per our standards. Does changing the hostname has any impact on the traffic flow?
Thanks,
Sridhar
No, it won't have any impact on the traffic flow.
Similar Messages
-
Cluster changing hostname & Logical host
hello I have sunCluster 3.1 update 4.
the cluster is 2(v440) + 1(v240) installed on solaris8.
Did anyone actualy succeeded to change the hostnames of all the nodes & Logical host on SunCluster system like above?
I saw a procedure that is not realy supported :
1. Reboot cluster nodes into non-cluster node (reboot -- -x)
2. Change the hostname of the system (nodenames, hosts etc)
3. Change hostname on all nodes within the files under /erc/cluster/ccr
4. Regenerate the checksums for each file changed using ccradm -I /etc/cluster/ccr/FILENAME -0Reboot every cluster node into the cluster
is it works?
Thanks & RegardsSo if I understand you correctly, you have two metasets already created and mounted. If so, this is a fairly tricky process (outlined from memory):
1. Backup your data
2. Shut down the RGs using scswitch -F -g <RGnames>, make the RGs unmanaged
3. Unmount the file systems
4. Deconstruct the metasets and mediators
5. Shutdown the cluster and boot -x
6. Change the hostnames in /etc/inet/hosts, etc
7. Change the CCR and re-checksum it
8. Reboot the cluster into cluster mode
9. Re-construct metasets and mediators with new host names
10. scswitch -Z -g <RGs>
If you recreate your metasets in the same way as they were originally created and the state replicas haven't changed in size, then the data should be intact.
Note - I have not tried this process in a long time. Remember also that changing the CCR as described previously is officially unsupported (partly because of the risks involved).
Regards,
Tim
--- -
What needs to be changed if we change hostname in linux
Dear all,
I have a question and will appreciate for appropriate answer(s).
My machine name was lxcms120.cern.ch and Oracle 10g DB was running fine on it (listener, DB, Enterprise Manager). It is not a production system rather a test system.
Now, i changed its name to docms11.cern.ch
I change hostname in listener.ora & tnsnames.ora and listener started successfully.
I started db from sqlplus and it started without any complaints.
Now, when i tried to start Enterprise Manager (emctl start dbconsole), it didn't and return this error.
OC4J Configuration issue. /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_docms11.cern.ch_oralxcms120 not found.
Now, i know that when the machine name was initially lxcms120, it was /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_lxcms120.cern.ch_oralxcms120
and if i go to that directory, i could see OC4J_DBConsole_lxcms120.cern.ch_oralxcms120 but of course there is no OC4J_DBConsole_docms11.cern.ch_oralxcms120
My dbname instance is oralxcms120 and has nothing to do with hostname.
So, what is the solution to the problem. Moreover, are there any steps to do while changing hostname of the oracle database like in my case which i can follow to make all required changes.
Best regards,
AnjumYou will need to do a little more than just directory rename,
From Oracle document,When the database host name (including the domain name) or the IP address changes, deconfigure and then reconfigure the Database Console with the repository create command. Run the following command:
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create
or
emca -deconfig dbcontrol db
emca -config dbcontrol db -repos recreate
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/structure.htm#CACBBFGI -
Creating Logical hostname in sun cluster
Can someone tell me, what exactly logical hostname in sun cluster mean?
For registering logical hostname resource in failoover group, what exactly i need to specify
for example, i have two nodes in sun cluster , How to create or configure a logical hostanme and it should point to which IP Address ( Whether it should point to IP addresses of nodes in sun cluster). Can i get clarification on this?Thanks Thorsten for ur continue help...
The output of clrs status abc_lg
=== Cluster Resources ===
Resource Name Node Name State Status Message
abc_lg node1 Offline Offline
node2 Offline Offline
The status is offline...
the output of clresourcegroup status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
abc_rg node1 No Unmanaged
node2 No Unmanaged
You say that the resource should de enabled after creating the resource.. I am using GDS and i am just following the steps he provided to acheive high availabilty (in developers guide...)
I have 1) Logical hostname resorce.
2) Application resource in my failover resource group
When i bring online the failover resource group , what should my failover resource group status and the status of resource in my resource group -
How to repair Open Directory Master after Changing Hostname
Summary:
How to repair Open Directory after Changing your Server's Hostname (see separate post)
Problem:
I had to change our server's hostname from a private hostname (server.name.private) to a public hostname (name.dyndns.org).
Procedure:
1. Precautions:
Since I was anticipating major dramas I tested the change of hostname on a clone ( I used Super Duper, and I very strongly advise everybody to heed this warning because a change of hostname will corrupt your server services, in particular Open Directory)
Second, I exported the network users from Server Admin and copied the archive to the Drop Folder of the server's local account (because the network accounts will be unavailable after demoting the OD Master.)
2. Change hostname and demote OD Master
a) I re-booted the server from the clone
b) I changed the hostname in Server App and I noticed that the Open Directory Password and the Kerberos database were still stuck with the old hostname.
c) I then demoted to a standalone directory (Server Admin) and I tried to promote the server to an OD Master using the Server App (Manage Network Accounts). Server App always returned an error saying I should check my network settings.
3. List of 'fixes'
I tried the following fixes to no avail (which does not mean that you can skip them)
a) I checked the DNS entries, forward and reverse were working fine (sudo checkip -changehostname)
b) Checked with Lookup in Network Utility, all was fine
c) I deleted all system certificates (Keychain) which showed the name of the previous hostname
( N.B. you need not delete email certificate and private/public keys)
d) I tried to assign a new static IP in Networking Preferences (had no visible result)
e) I re-booted from the working drive and I re-paired permissions on the clone; I ran disk repairs.
Despite all this I could not re-create an OD Master.
I then looked for this dubious folder /var/root/Library/Application Support/Certificate Authority.
I could not find this folder when using the Finder's Go To Folder, nor did "Easy Find" see this folder.
I was about to give up when I read the posts on this page and I entered the Terminal commands
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
I had not much hope when I set about to re-create the OD Master from the Server App.
But lo and behold !!! I did not trust my eyes when Server App claimed that the OD Master had been successfully created. And indeed, Server admin showed a running OD Master, LDAP, Kerberos and Password Server all running again !
Final touch: re-import the user accounts.
Epilogue:
I woud not have been able to fix this issue had not so many others shared their experience and the working solution.
(Refer : https://discussions.apple.com/thread/3219325?start=0&tstart=0 )
Thank you all !
Let's hope that Apple will fix this annoying issue in the next server update.
Regards,
TwistanHi Rhyan,
Please try clearing the security cache
http://www.sharepointanalysthq.com/2014/05/active-directory-groups-and-sharepoint-security/
https://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
http://webactivedirectory.com/active-directory/windows-active-directory-cached-user-credentials/
Please remember to click 'Mark as Answer' on the answer if it helps you -
Changing hostname on Callmanager 6.1 and generate new SSL
I'm looking to change the hostname of our Callmanager because of a change in the naming convention for all our servers.
Is it as easy as it seems or are there any precautions I need to be aware of?
My thoughts were to just Change hostname under Cisco Unified CM Configuration for both PUB and SUB
Since I use mostly IP address for most of my configuration, are there anything else I need to be concerned about?
Also, how do I generate a new SSL cert based on this change so admins and users won't get a certificate mismatch prompt?
Thanks!Hi Ken,
Thought you might want to see this
CSCtf23432 Bug Details Bug #11 of 38 | < Previous | Next >
CUCM Hostname change does not update self-signed certificates
None
Symptom:
After a hostname change, self-signed certificates are not regenerated. Web browser may indicate
that the CUCM certificate is not valid.
Conditions:
hostname change procedure.
Workaround:
From the os admin page:
1) security->certificate management
2) select "find"
3) for all the self-signed certs (identified by the description field),
select regenerate.
Further Problem Description:
n/a
Status
Fixed
Severity
3 - moderate
Last Modified
In Last Year
Product
Cisco Unified Communications Manager (CallManager)
Technology
1st Found-In
7.1(2)
Fixed-In
8.0(2.98000.25)
8.0(2.10000.4)
7.1(4.98000.167)
8.0(2.98000.31)
8.0(2.10000.24)
7.1(5.10000.12)
Cheers!
Rob -
Change hostname/domain in ebs 12.0.6
Hi All,
I have single node installation of EBS R12 (12.0.6) and database version is 10.2,
I want to change hostname and domain name of application and database.
I have found this document (ID 341322.1). i think this document is for EBS 11i ,
may i follow this document on EBS R12 ?
Thank & Regards
Ravi KumarHi Ravi,
Please have a look at the following notes, applicable to r12:
How to change the hostname and/or port of the Database Tier using AutoConfigNote (338003.1 )
How to change the hostname of an Applications Tier using AutoConfig (341322.1 )
You may follow link:
CHANGE HOSTNAME OR IP-Address OR DOMAIN NAME ON APPS-TIER OR DB-TIER in R12
http://applicationsdba.blogspot.com/2011/04/r12-iphost-name-change.html
Additionally, 2nd step would be..
- Run preclone script on DB and Apps Tier
- Change network necessary changes
- Run the post clone script.
Hope this helps!
Best Regards -
Oracle 11.2 standalone grid infrastructure - change hostname
Hi
I have changed hostname of my server running RHEL 5.3 with Oracle 11.2 Grid Infrastructure (standalone). After I changed the hostname of the server, the crs daemon stopped working and I cannot connect to my +ASM instance any longer.
In Oracle 10g2it was enough to run localconfig delete, localconfig add
What should I do in 11.2 ?
Thanks for help
GroxyHi Groxy,
I recently found myself asking the same question and after a fair amount of digging around I found a way to do it. Your question is now a few months old, so maybe you have found the solution already, but if not the key is using roothas.pl rather than localconfig. I have written a brief blog post covering the approach I used, so please check that out if you want more information.
[http://oraganism.wordpress.com/2009/12/20/11-2-changing-hostname/|http://oraganism.wordpress.com/2009/12/20/11-2-changing-hostname/]
I hope this helps.
Martin -
Interface allocation in ASA cluster multimode
Hi All,
Could someone help this please?
In ASA cluster multimode ver 9.0, do the cluster control links need to be allocated per context or do they just require in system context?
Regards,
TaoLaoTaolao,
You got data-interface and CCL interfaces mixed up. Only data-interface is configured as "port-channel span-cluster" which tells the port-channel it has member interfaces spanning multiple physical devices.
vss-id, too is supposed to be used for data-interfaces.
CCL interface configuration on ASA and N7k should be as below
SW-1
interface Ethernet2/9
description CONNECTED TO ASA-A Ten0/8
switchport
switchport access vlan 500
spanning-tree port type edge
mtu 9000
channel-group 41
no shutdown
interface port-channel41
description CONNECTED TO ASA-A CCL
switchport
switchport access vlan 500
spanning-tree port type edge
mtu 9000
vpc 41
SW-2
interface Ethernet2/9
description CONNECTED TO ASA-A Ten0/9
switchport
switchport access vlan 500
spanning-tree port type edge
mtu 9000
channel-group 41
no shutdown
interface port-channel41
description CONNECTED TO ASA-A CCL
switchport
switchport access vlan 500
spanning-tree port type edge
mtu 9000
vpc 41
ASA
interface TenGigabitEthernet0/8
channel-group 1 mode on
interface TenGigabitEthernet0/9
channel-group 1 mode on
interface Port-channel1
description Clustering Interface
Since CCL port-channel is individual to an ASA, you need to create a corresponding port-channel on N7k for each of the cluster nodes. For example, on N7k you need to create Po42 for node-B, Po43 for node-C etc. -
Hi
I have set up clustering on 2 ASA 5555-x firewalls and just saw on the cisco site that SIP inspection is not supported. My organization provides a voip solution that requires SIP. Does anyone know a work around for SIP on an ASA cluster?
I look forward to your response.Hi Smetieh,
You need a policy inspection for sip, please follow the example below.
class-map cls-SIP
match default-inspection-traffic
policy-map pmap-SIP
description My-SIP Policy
class cls-SIP
inspect sip
service-policy pmap-SIP interface outside
Hope this helps.
Thanks
Rizwan Rafeek. -
How to disable auto-changing hostname?
I set my computer a hostname (let's say "MyComputer"), but when I connect to wired network, it changes hostname to whatever reverse DNS IP lookup turns out (let's say "Workstation312").
I know I can change the hostname using "hostname" in terminal- but is there a way to disable auto-changing hostname?Hi,
Please try the steps in the following thread to see whether it could help:
Remove IE10's “clear field” X button on certain inputs?
http://stackoverflow.com/questions/14007655/remove-ie10s-clear-field-x-button-on-certain-inputs
Regards,
Vincent Wang
TechNet Community Support -
hi,
I want to change hostname of R12 Database and Application servers
Ebiz R12 is running in 2 RAC DBtier and 2 appstier
Can anyone share a documents on how to configure this
Can this be done without a downtime?
regards,
roseHi,
You will have to follow the steps in these documents (it is applicable for 11i and R12).
Note: 338003.1 - How to change the hostname and/or port of the Database Tier using AutoConfig
Note: 341322.1 - How to change the hostname of an Applications Tier using AutoConfig
Regards,
Hussein -
Change hostname of MaxDB server.
Dear All,
I want to change hostname of MaxDB server.
For the Oracle, some parameter should be changed. (ex.listener file).
What about MaxDB?
Regards,
KimHi,
this link may help you...
[Hostname change on R/3 hosts running SAP DB or MaxDB.|Hostname change on R/3 hosts running SAP DB or MaxDB.]
AND
[http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Regards.
Rajesh Narkhede -
Change hostname on nodes in STANDY RAC Cluster
Hi,
I would like to know the required steps to modify and hostname configuration in Oracle RAC if I update the hostnames of the 2 nodes in the RAC
Im running Redhat EL 5 , Oraclle 11g
Thanks in advanceI don't think you could change the hostname with CRS, without re-installing CRS.
-
Hi,
I have 2 servers working in Service Guard cluster.
The dcmctl listcomponents gives OC4J (2 instances) and OHS.
When the application is moved to other node (ie. because of failure) then it doesn;t start. I suppose it is connected with different hostname of these two nodes.
In this configuration, is it possible to in easy way change the hostname in configuration ???
I will be greatfull for any ideas..
RadekChange Hostname of database & application
Steps to be followed:
1) Database & Application must be open.
1. Deregister the current database server (Required)
As the database hostname and/or port will be changed, the current database server node needs to be de-registered.
To deregister the current database server node, run the following command as the owner of the Oracle RDBMS file system and current database instance:
2) Login on database in our case login on machine 192.168.1.182 with orat user.
3) Go to this directory by following command:
4) orat@emaarmgft $ cd $ORACLE_HOME/appsutil
5) Type this command:
6) orat@emaarmgft $ perl bin/adgentns.pl appspass=apps contextfile=DEV_emaarmgft.xml -removeserver
7) output is something like this:
Generate Tns Names
Classpath : :/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/charsets.jar:
/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/core.jar:/u04/oracle/devdb/9.2.0
/jre/1.4.2/lib/graphics.jar:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/javaplugin.jar
:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/security.jar:/u04/oracle/devdb/9.2.0/jre/
1.4.2/lib/server.jar:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/xml.jar:/u04/oracle/d
evdb/9.2.0/jdbc/lib/classes12.jar:/u04/oracle/devdb/9.2.0/appsutil/java/xmlparse
rv2.zip:/u04/oracle/devdb/9.2.0/appsutil/java:/u04/oracle/devdb/9.2.0/jlib/netcf
g.jar
Loading ORACLE_HOME environment from /u04/oracle/devdb/9.2.0
Logfile: /u04/oracle/devdb/9.2.0/appsutil/log/DEV_emaarmgft/10251131/NetServiceHandler.log
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
2. Deregister the current Applications server (Required)
As the Applications hostname will be changed, the current Applications server node needs to be de-registered.
To deregister the current Applications server node, run the following command as the owner of the Oracle Applications file system and current database instance:
perl $AD_TOP/bin/adgentns.pl appspass=<APPSpwd> \
contextfile=<CONTEXT> -removeserver
Login in application: applt
Go to following directory;
applt@emaarmgft$ cd $APPL_TOP/admin
then put the following command:
perl $AD_TOP/bin/adgentns.pl appspass=<APPSpwd> \
contextfile=DEV_emaarmgft.xml -removeserver
=======================================================================================================
Locate the System Name:
The System name is the database name
Verify with sql query:
select DB_NAME from FND_DATABASES;
Locate the server name corresponding to the tier in question:
Query on the Applications tier:
select NAME, SERVER_TYPE from FND_APP_SERVERS, FND_NODES
where FND_APP_SERVERS.NODE_ID = FND_NODES.NODE_ID and
SERVER_TYPE='APPS' and FND_NODES.NODE_NAME=upper('hostname');
Run the following PL/SQL block:
begin
FND_NET_SERVICES.remove_server('<SYSTEM_NAME'>, '<SERVER_NAME>');
end;
IN our case Something is like this:
8) then login in sqlplus
9) put this command
10) SQL> conn
Enter user-name: apps
Enter password:
Connected.
SQL> begin
2 fnd_net_services.remove_server('DEV','emaarmgft_DEV_APPS');
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
=================================================================================================
2. Update the AutoConfig Context files in Database Tier (conditional)
If the Context file values have already been changed previously and you had to manually remove the Tier server, then you can skip this step
Create a new context file using the following syntax:-
This will create a new Context file of the format <SID>_<new hostname>.xml in the current working directory
11) Then go to following path like this:
12) Login in orat
13) cd $ORACLE_HOME/appsutil
14) Type this command orat@emaarmgft $ perl ./bin/adclonectx.pl contextfile=$CONTEXT_FILE
15) Output this something like this
/u04/oracle/devdb/9.2.0/jre/1.4.2/bin/java -classpath /u04/oracle/devdb/9.2.0/jd
bc/lib/classes12.jar:/u04/oracle/devdb/9.2.0/appsutil/java/xmlparserv2.zip:/u04/
oracle/devdb/9.2.0/jre/1.4.2/lib/rt.jar:/u04/oracle/devdb/9.2.0/appsutil/java: o
racle.apps.ad.context.CloneContext -e /u04/oracle/devdb/9.2.0/appsutil/DEV_emaa
rmgft.xml -perl "/u04/oracle/devdb/9.2.0/Apache/perl/bin/perl" -perl5lib "/u04/o
racle/devdb/9.2.0/Apache/perl/lib/5.00503:/u04/oracle/devdb/9.2.0/Apache/perl/li
b/site_perl/5.005:/u04/oracle/devdb/9.2.0/appsutil/perl" -tmpl ./bin/../template
/adxdbctx.tmp
Provide the values required for creation of the new Database Context file.
Do you want to use a virtual hostname for the target node (y/n) [n] ?:
Target hostname [emaarmgft]:emgftest
Target instance is a Real Application Cluster (RAC) instance (y/n) [n]:
Target System database name [DEV]:
Oracle OS User [orat]:
Oracle OS Group [dba]:
Target system RDBMS ORACLE_HOME directory [u04/oracle/devdb/9.2.0]:
Target system utl_file accessible directories list [usr/tmp]:
Number of DATA_TOP's on the target system [4]:
Target system DATA_TOP 1:
RC-00212: Warning: Input value cannot be null
Target system DATA_TOP 1:1
RC-00213: Warning: The path specified must be the absolute path
Target system DATA_TOP 1: /u04/oracle/devdb
Target system DATA_TOP 2: /u04/oracle/devdata
Target system DATA_TOP 3: /u04/oracle/devab
Target system DATA_TOP 4: /u04/oracle/devbc
Do you want to preserve the Display set to emaarmgft:0.0 (y/n) [y] ?:n
Target system Display [emgftest:0.0]:
Do you want to preserve the port values from the source system on the target sys
tem (y/n) [y] ?:
Database port is 1522
New context path and file name [DEV_emgftest.xml]:
Creating the new Database Context file from :
/u04/oracle/devdb/9.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u04/oracle/devdb/9.2.0/appsutil/DEV_emgftest.xml
Log file located at /u04/oracle/devdb/9.2.0/appsutil/CloneContext_10251144.log
orat@emaarmgft $
=============================================================================================
2. Update the AutoConfig Context files in Application Tier(conditional)
If the Context file values have already been changed previously and you had to manually remove the Tier server, then you can skip this step
Create a new context file using the following syntax:-
cd $APPL_TOP/admin
perl $AD_TOP/bin/adclonectx.pl contextfile=$CONTEXT_FILE
This will create a new Context file of the format <SID>_<new hostname>.xml in
Login in Application: applt
applt@emaarmgft$ cd $APPL_TOP
applt@emaarmgft$ perl $AD_TOP/bin/adclonectx.pl contextfile=$CONTEXT_FILE
This will create a new contextfile. In our case a new contextfile will create in $APPL_TOP/admin directory with this name:
DEV_emgftest.xml
===========================================================================================
3. Shutdown the Applications Tier Services (Required)
Shutdown the Middle Tier services using the script under the following location:-
applt@emaarmgft$ cd $APPLCSF/scripts/DEV_emaarmgft
applt@emaarmgft$ ./adstpall.sh apps/apps
Run AutoConfig on the Database Tier (Required)
Run AutoConfig on the database tier node using the following syntax:-
cd <RDBMS ORACLE_HOME>/appsutil/bin/
./adconfig.sh contextfile=<RDBMS ORACLE_HOME>/appsutil/<SID>_<new_hostname>.xml
15) go to following path like this:
16) orat@emaarmgft $ cd $ORACLE_HOME/appsutil
17) orat@emaarmgft $ cd bin
18) orat@emaarmgft $ ./adconfig.sh contextfile=$ORACLE_HOME/appsutil/DEV_emgftest.xml
19) output is something like this:
Enter the APPS user password:
AutoConfig is configuring the Database environment...
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /u04/oracle/devdb/9.2.0
Classpath : :/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/cha
rsets.jar:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/core.jar:/u04/oracle/devdb/9.2.0
/jre/1.4.2/lib/graphics.jar:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/javaplugin.jar
:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/security.jar:/u04/oracle/devdb/9.2.0/jre/
1.4.2/lib/server.jar:/u04/oracle/devdb/9.2.0/jre/1.4.2/lib/xml.jar:/u04/oracle/d
evdb/9.2.0/jdbc/lib/classes12.jar:/u04/oracle/devdb/9.2.0/appsutil/java/xmlparse
rv2.zip:/u04/oracle/devdb/9.2.0/appsutil/java:/u04/oracle/devdb/9.2.0/jlib/netcfg.jar
Using Context file : /u04/oracle/devdb/9.2.0/appsutil/DEV_emgftest.xml
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...COMPLETED
Updating rdbms version in Context file to db920
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed with errors.
The log file for this session is located at: /u04/oracle/devdb/9.2.0/appsutil/log/DEV_emgftest/10251218/adconfig.log
=======================================================================================================
Run AutoConfig on the Applications Tier(s) (Required)
Run AutoConfig on the Applications tier node using the following syntax:-
cd <COMMON_TOP>/admin/scripts/<CONTEXT_NAME>
./adautocfg.sh appspass=<appspasswd>
20) login in application with applt
21 ) then go to follwing directory
22) cd $APPLCSF/scripts/DEV_emgftest/
23) applt@emaarmgft $ ./adautocfg.sh appspass=apps
24) Output is something like this:
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /u03/oracle/devappl
Classpath : :/usr/java14/jre/lib/charsets.jar:/usr/jav
a14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java14/jre/lib/ibmcer
tpathprovider.jar:/usr/java14/jre/lib/ibmjaaslm.jar:/usr/java14/jre/lib/ibmjcefw
.jar:/usr/java14/jre/lib/ibmjgssprovider.jar:/usr/java14/jre/lib/ibmjssefips.jar
:/usr/java14/jre/lib/ibmjsseprovider.jar:/usr/java14/jre/lib/ibmorb.jar:/usr/jav
a14/jre/lib/ibmorbapi.jar:/usr/java14/jre/lib/ibmpkcs.jar:/usr/java14/jre/lib/ja
vaplugin.jar:/usr/java14/jre/lib/security.jar:/usr/java14/jre/lib/server.jar:/us
r/java14/jre/lib/xml.jar:/usr/java14/lib/dt.jar:/usr/java14/lib/tools.jar:/u03/o
racle/devcomn/java/appsborg2.zip:/u03/oracle/devcomn/java
Using Context file : /u03/oracle/devappl/admin/DEV_emaarmgft.xm
l
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...COMPLETED
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring ABM_TOP.......COMPLETED
Configuring ECX_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring GL_TOP........COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Configuring CSF_TOP.......COMPLETED
Configuring XNC_TOP.......COMPLETED
Configuring IGS_TOP.......COMPLETED
Configuring IBY_TOP.......COMPLETED
Configuring PA_TOP........COMPLETED
Configuring JTF_TOP.......COMPLETED
Configuring MWA_TOP.......COMPLETED
Configuring CN_TOP........COMPLETED
Configuring CSI_TOP.......COMPLETED
Configuring WIP_TOP.......COMPLETED
Configuring CSE_TOP.......COMPLETED
Configuring EAM_TOP.......COMPLETED
Configuring IMT_TOP.......COMPLETED
Configuring FTE_TOP.......COMPLETED
Configuring ONT_TOP.......COMPLETED
Configuring AR_TOP........COMPLETED
Configuring AHL_TOP.......COMPLETED
Configuring OZF_TOP.......COMPLETED
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
The log file for this session is located at: /u03/oracle/devappl/admin/DEV_emaar
mgft/log/10251222/adconfig.log
5. Shutdown the Database Listener (required)
Shutdown the DB TNS listener using the script under the following location (old configuration script)
<RDBMS ORACLE_HOME>/appsutil/scripts/<old SID_hostname>/addlnctl.sh stop {listener}
6. Shutdown the Database (conditional)
If the hostname of the Database Tier is to be changed shutdown the Database now
Shutdown the DB TNS listener using the script under the following location (old configuration script)
<RDBMS ORACLE_HOME>/appsutil/scripts/<old SID_hostname>/addbctl.sh stop immediate
26) then login in oracle user like orat
27) go to this directory
28) cd $ORACLE_HOME/appsutil/scripts/DEV_emaarmgft
29) shutdown the listener
30) shutdown the database.
Change the machine hostname (conditional)
Login in root user
Type the following command:
# chdev –l inet0 –a hostname=emgftest
Change the hostname like:
# vi /etc/hosts
This will open a vi editor
Type the following entry:
192.168.1.182 emgftest.emaarmgf.com
save it .
Shutdown the Machine:
#shutdown –r
Start the Database (conditional)
If the database was stopped in a previous step, source your new environment file, and start the Database
<RDBMS ORACLE_HOME>/appsutil/scripts/<new SID_hostname>/addbctl.sh start
9. Start the DB TNS Listener (required)
Source you new environment file and start the Database listener
<RDBMS ORACLE_HOME>/appsutil/scripts/<new SID_hostname>/addlnctl.sh start {listener}
If the port was changed, ensure it starts on the new port
10. Start the Applications Tier Services
Start the Applications Tier Services using the following script:-
$COMMON_TOP/admin/scripts/<SID_hostname>/adstrtal.sh apps <appspasswd>
Maybe you are looking for
-
New iMac 24" 2.8GHz plagued with problems
I ordered a new iMac 24" 2.8GHz with 2GB RAM, 500GB Hard drive, on September 16th (last day for the academic Adobe CS3 deal, and the iPod deal (but unfortunately too early for me to get Leopard)). Not my first Mac (oh how I love my IIcx), but my firs
-
How can i copy the books through iTunes?
in the above picture i can see the copy option but i cannot paste that file in my computer.how can i save that file to my computer?is there any way using itunes?
-
We are currently running P6 (Release 8.1.2.6). It runs in a LINUX environment using IE8 with JRE 24. Ever since our deployment, we have continued to experience user timeouts. The issue has finally reached critical mass with our user base and manageme
-
How to deal with Null Variables
AND (CONVERT(varchar, CAST(rtrim(SH.ship_dt) AS datetime), 101) = (CONVERT(varchar, (DATEADD(day, -1, GETDATE())), 101))) This part of my where clause results in a NULL causing my job to fail since it is setting an integer variable. Any tips? I've
-
Can Edge Reflow handle type on top of background image within a box?
What I mean is, from code point of view, it's not <img src="">, but <style="background: url()">, then put type on top of the background image. Can Edge Reflow handle that? Really appreciate your help.