Changing of byte value

byte value is -128 to 127
i want to make it 0 to 255
the return result must be in byte form
is it possible?
how?
can bit mapping work?
tq

fmpfmpf wrote:
because i want to try to do it in byteAs long as the value is always a byte, it doesn't matter whether the JVM thinks it's 255 or -1. The problem is, every time you perform any kind of operation on a {color:000080}byte{color} or a {color:000080}short{color}, the JVM promotes it to an {color:000080}int{color}, preserving the sign in the process. Then you have to mask it to recover the original value. Save yourself that hassle and keep using {color:000080}int{color}s.

Similar Messages

How to update a large (over 4 million item) List(Of Byte) quickly by altering indexes contained in a Dictionary(Of Integer, Byte) where the Dictionaries keys are the indexes in the List(Of Byte) that need to be changed to the values for those indexes?

   I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
   So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
   Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
   What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
   Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
   I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
   The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
    The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
    In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
   But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
    I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
   I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
   I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
   Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
   So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
   I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
   Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida loca

Monkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca

How to change integer to byte value

i need to change long/integer/short number to byte value , on the other hand, convert byte value to long/integer/short.
is there anyone can tell me how to do it?

OK I'll byte no real pun intended though.
I am having all kinds of trouble outputing to a stream.
I have a value that is an integer 47012 and I
cast it
int foo = 47152
byte bar = (byte) foo;
System.out.println(foo); //just to see if the int is ok
// I am seeing 47152
System.out.println(bar); // in a crazed attempt to get a check of the value
// I am seeing 48
oStream.write(bar);
the file I am writing to is filled instead with
all 30. I know that 30 = 48 in hex so this makes some sense as java is converting the byte to dec 48.
what I dont get is that 47152 = B830 so since I am to collect my data and then convert it to a byte and since I am loosing the top 2 digits how to I preserve them to output to the stream?

Byte value == -16

Hi, i try to understand this issue, for example if i write "�" (\u011F) character to the file using FileOutputStream object, it converts "�" (\u011F) to -16 byte value and write it to file, that's great but the strange thing is, it prints correct character which is ("�" ) but why it is not print "?" character . Something about ANSI CHARACTERS ? any idea ?
Regards
Altug.

Hi Altug,
I can only guess that you're seeing the -16 code in an external editor or something, right? I doubt you'd be seeing it within Java.
Anyway, in binary, \u011F becomes the following :
0000 0001 0000 1111
When this character is placed in the file, its encoding is converted from the UTF-8 within Java (or UTF-16 if it's part of a String) to whatever the OS platform default is. If you're in Windows, it's probably something not dissimilar to ASCII. The important thing to note here is that the change in encoding will not change the bytes that represent your character - it will only change how these bytes are interpreted.
What your OS is likely doing is interpreting that loose 1 up the end of the first byte as a minus sign.
This then effectively makes your character - 0000 1111, or -16 in decimal.
This doesn't mean your character's just crapped itself - it simply means it's being displayed in a different encoding.
Hope that helps!
Martin Hughes

BAPI_CUSTOMERQUOTATION_CHANGE - error while changing a condition value

Hallo Gurus,
I am trying to use tshi BAPI BAPI_CUSTOMERQUOTATION_CHANGE to change a condition value of a condition record of a quotation.
Every time I execute the BAPI, instead of the condition tyoe being changed, a new record is added to the list of conditions!
Can someone please help!
Thsi is my piece of code::
itab_BAPISDH1X-UPDATEFLAG = 'U'.
append itab_BAPISDH1X.
itab_BAPICOND-ITM_NUMBER = '10'.
itab_BAPICOND-COND_ST_NO = '31'.
itab_BAPICOND-COND_COUNT = '00'.
itab_BAPICOND-COND_TYPE = 'ZST3'.
itab_BAPICOND-COND_VALUE = '15.00'.
itab_BAPICOND-COND_UPDAT = 'X'.
append itab_BAPICOND.
itab_BAPICONDX-ITM_NUMBER = '10'.
itab_BAPICOND-COND_ST_NO = '31'.
itab_BAPICOND-COND_COUNT = '00'.
itab_BAPICONDX-COND_TYPE = 'ZST3'.
itab_BAPICONDX-UPDATEFLAG = 'X'.
itab_BAPICONDX-COND_VALUE = 'X'.
append itab_BAPICONDX.
CALL FUNCTION 'BAPI_CUSTOMERQUOTATION_CHANGE'
EXPORTING
    salesdocument                = p_vbeln
QUOTATION_HEADER_IN          =
    quotation_header_inx         = itab_BAPISDH1X
tables
    return                       = itab_BAPIRET2
   CONDITIONS_IN                = itab_BAPICOND
   CONDITIONS_INX               = itab_BAPICONDX
Thanks!
Mukta

Hmm...
Change the following....and check..
itab_BAPICONDX-ITM_NUMBER = '10'.
itab_BAPICOND-COND_ST_NO = '31'.
itab_BAPICOND-COND_COUNT = '00'.
itab_BAPICONDX-COND_TYPE = 'ZST3'.
itab_BAPICONDX-UPDATEFLAG = 'X'.
itab_BAPICONDX-COND_VALUE = 'X'.
append itab_BAPICONDX.
"change the above to.....
ab_BAPICONDX-COND_TYPE = 'X'.
append itab_BAPICONDX.
The BAPICONDX.. should contain only X.. in the fields which you want to update.. try this change..and let us know if it works.
Also have a look at the FUNCTION MODULE DOCUMENTATION for this bapi in SM37.
Cheers...

BI-IP: Change of characteristic value in ABAP EXIT planning function

Hi
I have created a planning function of the type EXIT with reference data without blocks. In method IF_RSPLFA_SRVTYPE_IMP_EXEC_REF~EXECUTE I am going to implement my code.
Now, one of the purposes is to update the VALIDTO of an existing record. Is it possible to modify the characteristic values directly in C_TH_DATA (thus allowing me to just update the date directly on the record) or can I only append records?
Cheers!
/Karsten

Hi Larse,
Yes you can change directly your value in a record withou appending a new one,but still it will create 2 records in the delta buffer ready to be save to the cube.
Reagrds,
Eitan.

How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

Hi,
How to Change a Default Value from 'High' to 'Low' in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component. I saw a Default Value set for a RANGE field in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
I appreciate your help!
Thanks,
Monica

hi,
use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
// u can use the code wizard( control +f7) this code will be auto generated when u select the
//radio button to read the context node
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node.
* navigate from <CONTEXT> to <CN_NODE> via lead selection
lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
name = `ATTribute name.`
value = 'LOW' ).
it will solve ur query ..
also refer to this component
wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
regards,
amit

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to change the column value which is coming from DO by a calculated field?

Hi all,
I want to change a column value based on my calculated field value. I have a column which is coming from DO which is based on External Data Source. I have a calculated field in my report. When there is any change in the calculated field then the column which is coming from DO needs to be changed. It means the DO needs to get updated when there is a change in the calculated field. Or like if the calculated field meets some condition then I need to change/update the same in the DO. This has to be done on the fly. the report should not submitted for this. when there is a change in the calculated column the DO column needs to get updated.
Thanks,
Venky.

Ok, I've been a customer for very many years, I'm on a fixed retirement
income. I need to reduce my bills, my contract ends in Dec. I will be
pursuing other options unless I can get some concessions from Verizon. My
future son-in-law was given this loyalty plan, so I know this is a
reasonable request. My phone number is (removed) acct number
(removed)
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How can I change the initial value of the field approve_or_reject?

Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654

Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended.....

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

Is it possible to change the display value of a domain-based attribute?

Hello,
I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity. However, I cannot find a way to display anything but the code value in the drop-down (see below).
Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
Thanks in advance!
Ben Lezin

1. In the explorer page, settings dialog, you can change the display format to show only name.
2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
b. Make a Business Rule to update Name when HierarchyName is changed.

How to change the variable value in fox formula?

Hi All,
    Please help me achieve this scenario,
         in the variable selection screen , i wil give some i/p like, calyear(0calyear) = 2008.
      In planing function using FOX formula, i must be able change the variable value to 2009.
Will it be possible to achieve this, can we change a variable value using FOX formula, if possible
please let me knw how to achieve this.
Thanks n Regards,
Priya.

Hi Priyadarshini,
i dont know what is your requirement exactly.If you can give a better explanation of ur requirement we can help you. But to answer your question yes we can get new values for the variable in the planning function.
for this you need to couple the planning function together with the planning filter in a planning sequence. This planning filter should have the variable that you wanted to change. In the WAD when you want to call this planning sequence there is an option to call variable screen. If you enable this, it will pop up the variable screen to get this value again.
Guess this was helpful.
Regards.
Shafi.

Unable to change the parameter value in the configtool

Hi All,
Error
In the Configtool I have changed the custom value to u2018TRUEu2019 of the key u201Cume.superadmin.activatedu201D under Cluster-data -> instance -> server -> services -> com.sap.security.caore.ume.service. Now I am trying to change the value again to u2018FALSEu2019 but the value is not getting updated even after the server is restarted OS level. Please advise.
System details:
SAP: PI 7.0
DB: MS SQL 2000
OS: Windows 2003 server
Thanks in advance.
Regards,
Dinesh

Hi Dinesh,
There are a variety of reasons why this is not getting reflected :
1) When you make changes if you use an AS ABAP or LDAP directory as the data source. The default values of the UME properties assume the database of the AS Java as the data source. This requires you to reconfigure the data source before you can restart the AS Java.
2) The cluster nodes have not been restarted after the changes
3) Changes apart from global configuration have also been made elsewhere.
4)properties as described in Editing UME Properties.
Editing UME Setting:
a) Start the Config Tool by executing
\j2
ee\configtool\configtool.bat.
b) In the tree, navigate to Global server
configuration services com.sap.security.core.ume.
service.
The list of UME properties appears.
Regards
joel
Edited by: joel trinidade on Apr 15, 2009 12:29 PM

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Changing of byte value

Similar Messages

Maybe you are looking for