Changing range of date and data
hi all,
i am having fw coloumns like : Store, Country, year, Revenue.
now here revenue showing data for any store and country according to 1jan to 31dec.
i need to view the revenue according to 1 April to 31 Mar.
how to do that .
please help
regards
Tell the full scenario.
you can use function module for last date of each month. and run the loop from 1 to last of the month.
for futher help tell the full scneario.
Similar Messages
-
ALV- Changing the output data and saving in database
hi friends,
I have to change the material description in the output and have to save the changes in database..
For changing the description I have to raise a pop-up, then I have to give the required change and then save..
How to do it?
My code is as follows:
TABLES : vbrk,vbrp,vbpa,adrc.
TYPE-POOLS : slis.
DATA: w_report_id LIKE sy-repid.
DATA: w_title TYPE lvc_title VALUE 'DIPLAY CUSTOMER BILLING DOCUMENT'.
DATA: w_layout TYPE slis_layout_alv.
DATA: w_fieldcat TYPE slis_t_fieldcat_alv.
DATA: w_events TYPE slis_t_event.
DATA: w_header TYPE slis_t_listheader.
DATA: sum LIKE vbrk-netwr.
SELECT-OPTIONS:
erdat FOR vbrk-erdat,
vkorg FOR vbrp-vkorg_auft,
kunag FOR vbrk-kunag.
DATA : BEGIN OF itab OCCURS 0,
fkdat TYPE vbrk-fkdat,
kunrg TYPE vbrk-kunrg,
name1 TYPE adrc-name1,
vbeln TYPE vbrk-vbeln,
augru_auft TYPE vbrp-augru_auft,
netwr TYPE vbrk-netwr,
waerk TYPE vbrk-waerk,
vbtyp TYPE vbrk-vbtyp,
fkart TYPE vbrk-fkart,
END OF itab.
DATA itab1 LIKE STANDARD TABLE OF itab.
SELECT vbrkfkdat vbrkkunrg adrcname1 vbrkvbeln vbrp~augru_auft
vbrknetwr vbrkwaerk
INTO TABLE itab1
FROM ( ( ( vbrk INNER JOIN vbrp ON vbrkvbeln = vbrpvbeln )
INNER JOIN vbpa ON vbpavbeln = vbrkvbeln )
INNER JOIN adrc ON adrcaddrnumber = vbpaadrnr )
WHERE vbtyp = 'O'
AND vbrk~erdat IN erdat
AND vbrp~vkorg_auft IN vkorg
AND vbrk~kunag IN kunag.
w_report_id = sy-repid.
PERFORM i_layout CHANGING w_layout.
PERFORM i_fieldcat CHANGING w_fieldcat.
SORT itab1 BY waerk fkart .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZTRAINING2'
i_grid_title = w_title
is_layout = w_layout
it_fieldcat = w_fieldcat
i_save = 'A'
TABLES
t_outtab = itab1
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form i_fieldcat
text
-->P_W_FEILDCAT text
FORM i_fieldcat CHANGING p_w_feildcat.
DATA: l_line_fieldcat TYPE slis_fieldcat_alv.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'FKDAT'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-edit_mask = '__-__-____'.
l_line_fieldcat-seltext_m = 'Billing Document date '.
APPEND l_line_fieldcat TO w_fieldcat.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'KUNRG'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-seltext_m = 'Cust no'.
APPEND l_line_fieldcat TO w_fieldcat.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'NAME1'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-seltext_m = 'Name of the reseller'.
APPEND l_line_fieldcat TO w_fieldcat.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'VBELN'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-seltext_m = 'Billing document number'.
APPEND l_line_fieldcat TO w_fieldcat.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'AUGRU_AUFT'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-seltext_m = 'Order reason'.
APPEND l_line_fieldcat TO w_fieldcat.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'NETWR'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-seltext_m = 'Amount'.
APPEND l_line_fieldcat TO w_fieldcat.
CLEAR l_line_fieldcat.
l_line_fieldcat-fieldname = 'WAERK'.
l_line_fieldcat-ref_tabname = 'ITAB1'.
l_line_fieldcat-seltext_m = 'Currency'.
APPEND l_line_fieldcat TO w_fieldcat.
ENDFORM. "i_fieldcat
*& Form i_layout
text
-->P_W_LAYOUT text
FORM i_layout CHANGING p_w_layout.
CLEAR w_layout.
w_layout-colwidth_optimize = 'X'.
w_layout-edit = 'X'.
ENDFORM. " i_layout
Thanks,
Revathi Raju.Check out the following link for top_of_page event in OOPs ALV.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
You can also check out the following program.
DATA: save_ok LIKE sy-ucomm,
g_container TYPE scrfname VALUE 'CC1',
g_grid TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
gt_fieldcat TYPE lvc_t_fcat,
g_max TYPE i VALUE 100.
* declarations for top of page event
Data: gv_c_split type ref to cl_gui_splitter_container,
gv_c_ptv type ref to cl_gui_container,
gv_alv_ptv type ref to cl_gui_alv_grid,
o_dd_doc TYPE REF TO cl_dd_document,
text TYPE sdydo_text_element,
o_split type ref to cl_gui_easy_splitter_container,
o_top type ref to cl_gui_container,
o_bot type ref to cl_gui_container,
gv_c_vp type ref to cl_gui_container.
* end of declaration for top of page.
CLASS lcl_event_receiver DEFINITION DEFERRED.
*class lcl_application_dc definition deferred.
DATA: o_event_receiver TYPE REF TO lcl_event_receiver.
* g_dc type ref to lcl_application_dc.
DATA: gt_outtab TYPE TABLE OF sbook.
* CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS: handle_f4 FOR EVENT onf4 OF cl_gui_alv_grid
IMPORTING e_fieldname
es_row_no
er_event_data
et_bad_cells
e_display,
handle_top_of_page FOR EVENT top_of_page OF cl_gui_alv_grid
IMPORTING e_dyndoc_id.
METHODS: reset.
METHODS: show_f4.
PRIVATE SECTION.
* attributes for creating an own F4-Help
* (using a second ALV Grid Control
DATA: f4_grid TYPE REF TO cl_gui_alv_grid,
f4_custom_container TYPE REF TO cl_gui_custom_container.
TYPES: BEGIN OF ty_f4.
TYPES: value TYPE s_class.
TYPES: descr(20) TYPE c.
TYPES: END OF ty_f4.
DATA: f4_itab TYPE TABLE OF ty_f4.
DATA: f4_fieldcatalog TYPE lvc_t_fcat.
* attributes to store event parameters
* (after the CALL SCREEN command, the event parameters
* are not accessible)
TYPES: BEGIN OF onf4_event_parameters_type.
TYPES: c_fieldname TYPE lvc_fname.
TYPES: cs_row_no TYPE lvc_s_roid.
TYPES: cr_event_data TYPE REF TO cl_alv_event_data.
TYPES: ct_bad_cells TYPE lvc_t_modi.
TYPES: c_display TYPE char01.
TYPES: END OF onf4_event_parameters_type.
DATA: f4_params TYPE onf4_event_parameters_type.
* Methods to create own F4-Help
* (This is done using a second ALV Grid Control)
METHODS: init_f4.
METHODS: build_fieldcatalog.
METHODS: fill_f4_itab .
METHODS: on_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING es_row_no.
ENDCLASS. "lcl_application_f4 DEFINITION
* CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
*§2. Implement an event handler method for event ONF4.
METHOD handle_f4.
* Save event parameter as global attributes of this class
* (maybe solved differently if you use a function module!)
f4_params-c_fieldname = e_fieldname.
f4_params-cs_row_no = es_row_no.
f4_params-cr_event_data = er_event_data.
f4_params-ct_bad_cells = et_bad_cells.
f4_params-c_display = e_display.
*§3. Call your own f4 help. To customize your popup check
* first if the cell is ready for input (event parameter E_DISPLAY).
* (parameter E_DISPLAY is checked later in method on_double_click)
* (Probably, you would call a function module at this point,
* pass the needed event parameter and call the popup screen
* within that function module. This is not done in this example
* to avoid scattering its code).
CALL SCREEN 101 STARTING AT 10 10.
*§7. Inform the ALV Grid Control that an own f4 help has been processed
* to suppress the standard f4 help.
er_event_data->m_event_handled = 'X'.
ENDMETHOD. "on_f4
METHOD show_f4.
* DATA: ls_outtab TYPE sbook.
* initialize own f4 help if needed
IF f4_custom_container IS INITIAL.
CALL METHOD init_f4.
ENDIF.
CALL METHOD fill_f4_itab.
* refresh list of values in f4 help and show it
CALL METHOD f4_grid->refresh_table_display.
* CAUTION: Do not use method REFRESH_TABLE_DISPLAY for
* your editable ALV Grid instances while handling events
* DATA_CHANGED or ONf4. You would overwrite intermediate
* values of your output table on frontend.
* 'f4_grid' is a non-editable ALV Grid Control for the
* application specific F4-Help. Therefore, calling
* REFRESH_TABLE_DISPLAY for this instance has no
* negative effect.
CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD. "show_f4
METHOD init_f4.
DATA: ls_f4_layout TYPE lvc_s_layo.
* build fieldcatalog entries for f4
CALL METHOD build_fieldcatalog.
* create controls
CREATE OBJECT f4_custom_container
EXPORTING container_name = 'CC_ONF4'.
CREATE OBJECT f4_grid
EXPORTING i_parent = f4_custom_container.
* hide toolbar
ls_f4_layout-no_toolbar = 'X'.
CALL METHOD f4_grid->set_table_for_first_display
EXPORTING
is_layout = ls_f4_layout
CHANGING
it_fieldcatalog = f4_fieldcatalog
it_outtab = f4_itab.
* register event double click on backend
SET HANDLER me->on_double_click FOR f4_grid.
* flush since 'ls_layout' is local!
CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD. "init_f4
METHOD fill_f4_itab.
DATA ls_f4_itab TYPE ty_f4.
* Delete all entries in f4_itab to determine
* offered values dynamically
CLEAR f4_itab[].
ls_f4_itab-value = 'C'.
ls_f4_itab-descr = text-t03. "Business Class
APPEND ls_f4_itab TO f4_itab.
ls_f4_itab-value = 'Y'.
ls_f4_itab-descr = text-t04. "Economie Class
APPEND ls_f4_itab TO f4_itab.
ls_f4_itab-value = 'F'.
ls_f4_itab-descr = text-t05. "First Class
APPEND ls_f4_itab TO f4_itab.
ENDMETHOD. "fill_f4_itab
METHOD build_fieldcatalog.
DATA: ls_fcat TYPE lvc_s_fcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'VALUE'.
ls_fcat-coltext = text-t02.
* ls_fcat-inttype = 'S_CLASS'.
ls_fcat-outputlen = 5.
APPEND ls_fcat TO f4_fieldcatalog.
CLEAR ls_fcat.
ls_fcat-fieldname = 'DESCR'.
ls_fcat-coltext = text-t01.
ls_fcat-inttype = 'C'.
ls_fcat-outputlen = 20.
APPEND ls_fcat TO f4_fieldcatalog.
ENDMETHOD. "build_fieldcatalog
METHOD on_double_click.
*§5. If not already caught by your own f4 help, check whether
* the triggered cell was ready for input by using E_DISPLAY
* and if not, exit.
IF f4_params-c_display EQ 'X'.
LEAVE SCREEN.
ENDIF.
*§6. After the user selected a value, pass it to the ALV Grid Control:
*§ 6a. Define a field symbol of type: LVC_T_MODI and a structure of
* type LVC_S_MODI to pass the value later on.
FIELD-SYMBOLS <itab> TYPE lvc_t_modi.
DATA: ls_modi TYPE lvc_s_modi,
ls_f4_itab TYPE ty_f4.
*§ 6b. Dereference attribute M_DATA into your field symbol and add
* the selected value to the table to which this symbol points to.
ASSIGN f4_params-cr_event_data->m_data->* TO <itab>.
ls_modi-row_id = f4_params-cs_row_no-row_id.
ls_modi-fieldname = f4_params-c_fieldname.
READ TABLE f4_itab INTO ls_f4_itab INDEX es_row_no-row_id.
ls_modi-value = ls_f4_itab-value.
APPEND ls_modi TO <itab>.
LEAVE TO SCREEN 0.
ENDMETHOD. "on_double_click
METHOD reset.
FIELD-SYMBOLS <itab> TYPE lvc_t_modi.
ASSIGN f4_params-cr_event_data->m_data->* TO <itab>.
CLEAR <itab>[].
ENDMETHOD. "reset
METHOD handle_top_of_page.
text = 'Top of page for program ZAMIT_SPLIT_CONTAINER'.
CALL METHOD e_dyndoc_id->add_text
EXPORTING text = text
sap_fontsize = 'LARGE'
sap_style = 'HEADING'.
CALL METHOD e_dyndoc_id->display_document
EXPORTING parent = o_top.
ENDMETHOD. "handle_top_of_page
ENDCLASS. "lcl_application_f4 IMPLEMENTATION
END-OF-SELECTION.
CALL SCREEN 100.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
PERFORM create_and_init_alv CHANGING gt_outtab[]
gt_fieldcat.
ENDIF.
ENDMODULE. "pbo OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
save_ok = sy-ucomm.
CLEAR sy-ucomm.
CASE save_ok.
WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
PERFORM exit_program.
WHEN 'SWITCH'.
PERFORM switch_edit_mode.
WHEN OTHERS.
* do nothing
ENDCASE.
ENDMODULE. "pai INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
LEAVE PROGRAM.
ENDFORM. "exit_program
*& Form build_fieldcat
* text
* -->PT_FIELDCAT text
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SBOOK'
CHANGING
ct_fieldcat = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
* Exchange smoker field with invoice field - just to
* make the dependance between SMOKER and CLASS more transparent
* (Smoking is only allowed in the first class).
IF ls_fcat-fieldname EQ 'SMOKER'.
ls_fcat-col_pos = 11.
ls_fcat-outputlen = 10.
ls_fcat-edit = 'X'.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
ls_fcat-checktable = '!'. "do not check foreign keys
MODIFY pt_fieldcat FROM ls_fcat.
ELSEIF ls_fcat-fieldname EQ 'INVOICE'.
ls_fcat-col_pos = 7.
MODIFY pt_fieldcat FROM ls_fcat.
ELSEIF ls_fcat-fieldname EQ 'CLASS'.
ls_fcat-edit = 'X'.
ls_fcat-outputlen = 5.
ls_fcat-checktable = '!'. "do not check foreign keys
MODIFY pt_fieldcat FROM ls_fcat.
ENDIF.
ENDLOOP.
ENDFORM. "build_fieldcat
*& Form create_and_init_alv
* text
* -->PT_OUTTAB text
* -->PT_FIELDCAT text
FORM create_and_init_alv CHANGING pt_outtab TYPE STANDARD TABLE
pt_fieldcat TYPE lvc_t_fcat.
DATA: lt_exclude TYPE ui_functions,
ls_layout TYPE lvc_s_layo.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
* CREATE OBJECT g_grid
* EXPORTING i_parent = g_custom_container.
CREATE OBJECT gv_c_split
EXPORTING
* link_dynnr = lv_dynnr
* link_repid = lv_repid
parent = g_custom_container
rows = 2
columns = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
others = 3 .
CALL METHOD gv_c_split->set_border
EXPORTING
border = space.
CALL METHOD gv_c_split->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = gv_c_ptv.
CALL METHOD gv_c_split->set_row_height
EXPORTING
id = 1
height = 20
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 6 .
CALL METHOD gv_c_split->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = gv_c_vp .
CALL METHOD gv_c_split->set_row_height
EXPORTING
id = 2
height = 10
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3 .
CREATE OBJECT o_split
EXPORTING
parent = gv_c_ptv
with_border = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
o_top = o_split->top_left_container.
o_bot = o_split->bottom_right_container.
CREATE OBJECT gv_alv_ptv
EXPORTING
i_parent = o_bot
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5 .
CREATE OBJECT g_grid
EXPORTING
i_parent = gv_c_vp
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5 .
PERFORM build_fieldcat CHANGING pt_fieldcat.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM exclude_tb_functions CHANGING lt_exclude.
PERFORM build_data CHANGING pt_outtab.
ls_layout-grid_title = 'F4 help implemented for field CLASS'.
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_top_of_page FOR gv_alv_ptv.
SET HANDLER o_event_receiver->handle_top_of_page FOR g_grid.
CREATE OBJECT o_dd_doc EXPORTING style = 'ALV_GRID'
no_margins = 'X'.
CALL METHOD gv_alv_ptv->set_table_for_first_display
EXPORTING
is_layout = ls_layout
CHANGING
it_outtab = pt_outtab[]
it_fieldcatalog = pt_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
is_layout = ls_layout
CHANGING
it_fieldcatalog = pt_fieldcat
it_outtab = pt_outtab[].
CALL METHOD gv_alv_ptv->list_processing_events
EXPORTING
i_event_name = 'TOP_OF_PAGE'
i_dyndoc_id = o_dd_doc.
* register f4 for field CLASS
PERFORM register_events.
* Set editable cells to ready for input initially
CALL METHOD g_grid->set_ready_for_input
EXPORTING
i_ready_for_input = 1.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form exclude_tb_functions
* text
* -->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form build_data
* text
* --> p1 text
* <-- p2 text
FORM build_data CHANGING pt_outtab TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
l_index TYPE i.
SELECT * FROM sbook INTO TABLE gt_outtab UP TO g_max ROWS.
IF sy-subrc NE 0.
PERFORM generate_entries CHANGING pt_outtab.
ENDIF.
LOOP AT pt_outtab INTO ls_sbook.
l_index = sy-tabix.
CLEAR ls_sbook-class.
* Alternate between smoker and non smoker to make
* it more obvious what this example is about
l_index = l_index MOD 2.
IF l_index EQ 1.
ls_sbook-smoker = 'X'.
ELSE.
ls_sbook-smoker = ' '.
ENDIF.
MODIFY pt_outtab FROM ls_sbook.
ENDLOOP.
ENDFORM. " build_data
*& Form generate_entries
* text
* -->PT_SBOOK text
FORM generate_entries CHANGING pt_sbook TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
l_month(2) TYPE c,
l_day(2) TYPE c,
l_date(8) TYPE c,
l_prebookid TYPE i.
ls_sbook-carrid = 'LH'.
ls_sbook-connid = '0400'.
ls_sbook-forcurkey = 'DEM'.
ls_sbook-loccurkey = 'USD'.
ls_sbook-custtype = 'B'.
DO 110 TIMES.
l_prebookid = sy-index.
ls_sbook-forcuram = sy-index * 10.
ls_sbook-loccuram = ls_sbook-loccuram * 2.
ls_sbook-customid = sy-index.
ls_sbook-counter = 18.
ls_sbook-agencynum = 11.
l_month = sy-index / 10 + 1.
DO 2 TIMES.
l_day = 3 + l_month + sy-index * 2.
l_date+0(4) = '2000'.
l_date+4(2) = l_month.
l_date+6(2) = l_day.
ls_sbook-fldate = l_date.
SUBTRACT 3 FROM l_day.
ls_sbook-order_date+0(6) = l_date+0(6).
ls_sbook-order_date+6(2) = l_day.
ls_sbook-bookid = l_prebookid * 2 + sy-index.
IF sy-index EQ 1.
ls_sbook-smoker = 'X'.
ELSE.
ls_sbook-smoker = space.
ENDIF.
ls_sbook-luggweight = l_prebookid * 10.
IF ls_sbook-luggweight GE 1000.
ls_sbook-wunit = 'G'.
ls_sbook-class = 'C'.
ELSE.
ls_sbook-wunit = 'KG'.
ls_sbook-class = 'Y'.
ENDIF.
IF ls_sbook-bookid > 40 AND ls_sbook-wunit EQ 'KG'.
ls_sbook-invoice = 'X'.
ENDIF.
IF ls_sbook-bookid EQ 2.
ls_sbook-cancelled = 'X'.
ls_sbook-class = 'F'.
ENDIF.
APPEND ls_sbook TO pt_sbook.
ENDDO.
ENDDO.
ENDFORM. " generate_entries
*& Form register_events
* text
FORM register_events.
*§1. Register event ONF4 at frontend using method
* register_f4_for_fields. For this purpose, you pass a table
* with all fields, for which you want to implement your own
* f4 help.
* remark: If you want to use an own f4 help for fields where
* no standard f4 help exists set field F4AVAILABL for
* this field in the fieldcatalog.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE.
CLEAR lt_f4.
lt_f4-fieldname = 'CLASS'.
* If you would like to deregister the field again,
* pass value SPACE with field 'register'.
lt_f4-register = 'X'.
*§ 1b. If the value range in your f4 help depends on other
* values of cells that are input enabled, set the
* GETBEFORE parameter.
* The consequence is that the ALV Grid Control raises
* event DATA_CHANGED before the f4 help is called to
* check values that the f4 help depends on.
lt_f4-getbefore = 'X'.
* The next parameter is used to change values after onf4 has
* been processed. The ALV Grid Control will raise
* event DATA_CHANGED afterwards, if you set it.
lt_f4-chngeafter = space.
INSERT TABLE lt_f4.
CALL METHOD g_grid->register_f4_for_fields
EXPORTING
it_f4 = lt_f4[].
* register events for abap objects (backend)
SET HANDLER o_event_receiver->handle_f4 FOR g_grid.
ENDFORM. " register_events
* MODULE status_0101 OUTPUT
MODULE status_0101 OUTPUT.
SET PF-STATUS 'POPUP'.
SET TITLEBAR 'POPUP'.
CALL METHOD o_event_receiver->show_f4.
ENDMODULE. " STATUS_0101 OUTPUT
*& Module USER_COMMAND_0101 INPUT
* text
MODULE user_command_0101 INPUT.
PERFORM user_command.
ENDMODULE. " USER_COMMAND_0101 INPUT
*& Form user_command
* text
FORM user_command.
DATA: save_ok TYPE sy-ucomm.
save_ok = sy-ucomm.
CLEAR sy-ucomm.
CASE save_ok.
WHEN 'CANCEL'.
CALL METHOD o_event_receiver->reset.
LEAVE TO SCREEN 0.
ENDCASE.
ENDFORM. "user_command
*& Form switch_edit_mode
* text
FORM switch_edit_mode.
IF g_grid->is_ready_for_input( ) EQ 0.
* set edit enabled cells ready for input
CALL METHOD g_grid->set_ready_for_input
EXPORTING
i_ready_for_input = 1.
ELSE.
* lock edit enabled cells against input
CALL METHOD g_grid->set_ready_for_input
EXPORTING
i_ready_for_input = 0.
ENDIF.
ENDFORM. "switch_edit_mode
For popup try this
reward if helpfull
Regards
Pavan -
How do I change the default "date range" when searching in the forums?
Hi all,
New to the SAP forums... How do I change the default date range when searching in the forums? I am getting a 90 day search by default. Then I have to change it and search again. Argh!
Thanks,
--Amy SmithHi Amy,
the default date range cannot be changed by users. It is defined system-wide.
Regards,
Michael -
i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer
I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi 729 KB -
Data settings changing on their own and losing connection
Can someone tell me why when on PAYG with the payandgo.o2.co.uk setting does it change back on it's own to idata.o2.co.uk and then my internet connection is lost and when I try and change it back to payandgo.o2.co.uk half to time it doesn't stick, so I have to do it again and again till it does, and then it'll last a day or two and change back again losing my connection again, this is driving me nuts.
I've been on Pay As You Go from the start so it's not a contract SIM but there was a little card in with SIM when I bought the phone that said to change the setting to idata as O2 had just changed it, so I did that, but since the data outages that O2 had a couple of months ago that setting didn't work so looking for a solution I found out about changing it to payandgo and that worked but keeps changing back.
Maybe it thinks that idata is what it should be, but I don't even have to sync the phone to iTunes for the setting to change back to idata, its like O2 are sending a signal to the phone to change it back or something or maybe the idata is set on the SIM and the Phone checks that from time to time and overwrites the way it is in the Cellular Data Network settings screen, very odd and infuriating either way.
There has to be a way to fix this, anyone have a clue? -
i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?
There isn't a way directly in Mail.
Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8 -
Mass change of pricing date and billing date in credit memo request
Hi,
Can i change the billing date pricing date on credit memo request docs using MASS transaction?
If i enter the regular sales order number it prompts me to change the value but if i enter the credit memo request doc number,the message "No data meets the selection criteria" is displayed.I also checked with IDES ,message is the same
Is there any different way to do mass change for credit memo requests or am i missing something here.
Please Suggest
Thanks
Abhilash NayakHi,
Go to the transaction code MASS and enter the OBJECT TYPE as BUS2032 and enter
It will lead you to the next screen where you can find the Table and Field TABS
Select the SALES ORDER HEADER DATA and choose the fields data and choose the fields PRICING DATE and BILLING DATE and execute
In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
Key in all the documents and execute
Now change the date as per your requirement and check the effect
regards,
santosh -
Change goods Issue date and delivery date
while crating Sales document through VA01
i want to replace goods issue date (VBEP-WADAT ) with my Z calender date.
so that delivery date(ETDAT) aslo should chaged automatically ( bcz iof the change in goods isuue date ).
how to achive this ?
i tryied in Program program of MV45AFZZ/ MV45AFZB in the User Exists mentioned below:
1. Form Userexit_Check_VBEP
2. Form userexit_move_field_to_vbep
i was able to change goods issue date (VBEP-WADAT ) but not refleting in output screen,..
regards,
rameshHi Venkat,
Even it did not update in my user exit when I update from VBEP-WADAT. So, I did back calculation (considering route lead time) and updated Delivery date field VBEP-EDATU. It is simple. I have given the sample code as below.
if lines( xvbap[] ) = 1 and VBEP-ETENR = '0001' and "Calculate RDD while the first line item entered
vbap-route <> space and <<your GI date>> is not initial. "Only when header RSD is filled
select single TRAZTD into ws_traztd from tvro
where route = vbap-route.
ws_days = ws_traztd / 24 / 10000.
if ws_days <> 0. "Only when Transp. Lead time is maintained ( So, will not affect other entities )
select single FABKL into ws_fabkl from T001W
where WERKS = vbap-werks.
CALL FUNCTION 'WDKAL_DATE_ADD_FKDAYS' "Calculate as per Factory calender
EXPORTING
i_date = <<your GI date>>
i_fkday = ws_days
i_fabkl = ws_fabkl
IMPORTING
E_DATE = ws_date
E_FKDAY =
EXCEPTIONS
ERROR = 1
OTHERS = 2
IF sy-subrc = 0.
VBEP-EDATU = vbak-vdatu. "copy to the first line item
ENDIF.
endif.
endif. "Route days -
I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this
You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
If that sends a message, please note the exact wording. -
Hello I want to change your secret question and date of birth
Hello
I want to change your secret question and date of birthThe Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
FIX: Change your Billing Cycle and Due Date!
There are many people angry about the change in billing due dates that have been set by AT&T recently. There is a way to get your due date back to where you want it but does require a little work on your part. NOTE: I am not an AT&T Employee, this is just advice from someone doing a little research! How the change works:First you will need to contact AT&T customer support (as this is just a customer to customer support forum so nobody here can make changes to your account). Let them know you want to change your billing cycle and due date. First month - you must complete your current billing cycleSecond month - you will have a prorated "short" cycle anywhere from 0-29 daysThird month - you will start with the billing cycle on the new date you select. There are a couple of other requirements below just so you are completely informed when talking to AT&T support.
Billing Cycle Change Requirements:
Changing your billing cycle is NOT an option in all service areas so contact support at 800-331-0500 to find out if this option is available in your service area.
Your billing cycle cannot be changed during the five days before or after the close of your current cycle. Your billing cycle cannot be changed if your account is in a delinquent status, or if the account will fall delinquent before the requested change date. If you have a payment arrangement set up, the payment arrangement must be made before the billing cycle is changed. If you have Autopay, you may see two Autopay drafts in one month due to the billing cycle change. Please keep in mind that when a billing cycle is changed you will see prorated charges to get all of the billing back on track with the new dates. Understanding that this does create an inconvenience for many people for the first 2 months you will be where you need to be after and back on track. If anyone has anything to add please do so and I will update my post.Hi there
This is a great guide that will be very helpful to any of our customers who wish to change their bill cycle dates! I’d just like to thank you for posting this and add some further expectations.
The balance on the prorated second invoice shows as Past Due on the customer's third invoice, even if it is not. The cycle change process does not impact their account status and corrects itself on subsequent bills. With regards to prorated charges, the customer is provided a video bill with their next statement to help explain the charges.
Thanks!
Charise -
How do I change the "Set Date and Time Automatically" server
Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?
sig wrote:
The menu has a drop down. But if you know the address of another time server I would think you can type it in.
Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
charlie -
I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie -
How to capture the data within the given range of maximum and minimum values ? from csv files
My requirement,
1. Here, the user will provide the range like maximum and minimum values, based on this range, the VI should capture the data within the given range. ( from CSV file as attached )
2. Then VI should calcluate the average value for captured data and export it to excel.
This is my requirement can anyone help me on this.
Many thanks in advance
rc_cks
Attachments:
sample_short.csv 2439 KBHi,
Thanks for remnding me. I forgt to attach the VI,
Here I am attaching the VI, what I tried.
From attached CSV file, I have to find an average value for columns B,C,D,E,F,G,H,I and AJ, AK. ( data range will be defined by user ), focused only on these columns
Here, the scope is to calculate an average value for given data range by user as MAX and MIN data.
FYI: I tried manually for two instance i.e column H & I. As per H column one steady state values from 7500 to 10500 and similarly in I column 7875 to 10050. So, I gave these as a limit to capture and calculate the average value. But unfortunaltely, requirement has been modified as per below requirements.
More Info on requirement:
--> The user will define the range of data by giving some MAXIMUM and MINIMUM values(for above mentioned columns induvidually), then VI should capture that data range and it has to caculate the average value for that range of data. This is the task I have to complete.
--> I am stuck in creating a logic for data capturing for given range of MAX and MIN value from user,
Can anyone help me on this.
If my explanation is not clear, Please let me know.
Many thanks, help mw
rc
Attachments:
VI_rc.vi 25 KB
sample.zip 4166 KB -
How i can change the arabic date and time mode to english date and time mode
how i can change the arabic date and time mode to english number mode
Settings app > General > International > Region format.
Maybe you are looking for
-
I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers. First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem,
-
[SOLVED]Can't build dansguardian. Any alternative content filter?
I can't build dansguardian in yaourt. Not sure what the problem is but here is the whole output of the build: ==> Starting build()... patching file src/downloadmanagers/fancy.cpp checking for a BSD-compatible install... /usr/bin/install -c checking w
-
Lightroom 5 is not exporting my previews in the catalog, please help!
I purchased Lightroom 5 on Wednesday and had no problem exporting my images from a catalog that included previews and smart previews. Now it is having trouble exporting my previews. I'd tried restarting lightroom, trying different folder, I made sure
-
Hi, I tried to do IDOC serialization using this blog /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi But in this blog its says to create a queue processing rule using WE85 transaction. My system is not as WAS 6.4
-
Help : Lost in Code - Trying to make a simple Click-Through
Hey Everyone - I've come in search of some help and expertise. I've found a website which I would like to copy in functionality - in hopes of creating a simple slideshow of images. They are using the MOOTOOLS framework for the Slide animation - i've