Changing the default currency of an entity after it has data stored

We would like to setup some new entities that are not incorporated for our Actuals collection yet and submit data to our Forecast scenario for them. The issue is the entities currency may change by the time it is incorporated at which point we would need to change the currency previously defined in the metadata for the entity. Will this have any adverse affects on the application other than the fact that the data currently in the system for the entity will not be relevant and would need to be cleared or overwritten with updated data in the new currency of the entity?

The data and journals will actually remain in the database, but will be unavailable to you. This is why I used the term "orphaned" in my earlier reply.
Yes, I suggest first removing the data and journals prior to making the currency change.
Yes, process management will re-set to Not Started, and the Calc Status will also be No Data. You may still see calc status and process management levels in those other currencies, but you cannot change them. That is, if you changed the currency from GBP to EUR, you will see see a calc status in GBP rather than NoData as you would see in any other unrelated currency.
Ideally, you would completely delete the entity in metadata, and then load it as a new entity with the new currency. This would be difficult to do if this entity is an Intercompany Partner for another entity. If it is not an ICP for anyone else, I would just delete the entity, and then add it back with the new currency.
--Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • Changing the Default Currency in Analytics App's don't change curr symbol

    Hi All,
    We are using BI APPS 7.9.4 with OBIEE 10.1.3.3.2
    We want to change the default currency for reporting from $ to £ in BI Dashboard reports.
    I have edited the currencies.xml file on $INSTALLDIR/OracleBI/web/config
    changed the sybmol to £ from $
    <Currency tag="int:wrhs" type="international" placeholder="true" symbol="£" format="$#" digits="2" displayMessage="kmsgCurrencySiebelWarehouse">
    <negative tag="minus" format="-$#" />
    </Currency>
    <Currency tag="loc:en-GB" type="local" symbol="£" locale="en-GB" format="$#" digits="2">
    <negative tag="minus" format="-$#" />
    </Currency>
    and restarted BI Server, Presentation Server, Java Host and all the OPMN services but the reporting currencies in the dashboard reports are still displayed in $. The report currency symbol is showing $ by default irrespective of the default currency set in the currencies.xml
    Ex: $13459
    Anyone know what this issue could be, please let me know if am missing anything.
    I appreciate your help.
    Rgds, Bhaskar Kolluru
    Edited by: bkolluru on 30-Sep-2008 03:14

    Did you try changing the format setting as well?
    format="£#"

  • How to change the default currency in CJ32 and CJ33

    Dear all,
    As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
    Could any one help me? Points will be awarded.
    Thank you.
    Christina.
    Edited by: Virendra Pal on May 5, 2010 8:34 AM

    Hi Christiana ,
    Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
    Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
    Regards
    Judy

  • Change the Default Authentication back to secLDAP after SAP kit 3.1 Install

    My client would like to switch the default authentication back to secLDAP after the installation of the SAP kit. What steps do we need to take to make this happen on Unix/Weblogic 9.2? Typically it is a simple chane in the Web.xml, but we are having trouble finding the correct one to make the change to.
    Thanks

    Here are the steps followed for unix Based WebLogic 9.2:
    Make changes to web.xml in: /business_objects_directory/bobje/enterprise120/warfiles/WebApps/InfoViewApp/WEB-INF/web.xml
        <!-- You can specify the default Authentication types here -->
        <!-- secEnterprise, secLDAP, secWinAD, secSAPR3 -->
        <context-param>
            <param-name>authentication.default</param-name>
            <param-value>secLDAP</param-value> --Changed to secLDAP from secSAPR3
        </context-param>
        <!-- Set to true to enable other single sign on. -->
        <context-param>
            <param-name>sso.enabled</param-name>
            <param-value>false</param-value> --changed to false, since we are not using single sign on
        </context-param>
    Navigate to : business_objects_directory/bobje/enterprise120/java/applications
    Run command: business_objects_directory/bobje/jdk/bin/jar cf InfoViewApp.war -C business_objects_directory/bobje/enterprise120/warfiles/WebApps/InfoViewApp .
    Navigate to: business_objects_directory/deployment
    run command: ./wdeploy.sh  weblogic9 -DAPP=InfoViewApp -Das_admin_password="password" -Dlanglist="en" deploy
    Weblogics did not require a restart for the change to take effect. The wdeploy Weblogic9 configuration file also needs to be configured per the documentation.
    I hope this helps someone.

  • Changing the Default currency in OBIA Dashboards

    Hi, I have successfully installed OBIA 7.9.5 and also I have integrated with EBS successfully. Only problem we have now is that by default all Reports and Dashboards are showing USD currency where as we need GBP. Is there a way I can change this default format acorss the reports and Dashboards in one shot?. I know I can change in each report and column..but I would not prefer that as there are 100's of columns.
    Appreciate any help on this.

    Hi,
    I know OBIEE. Could you please provide any document or brief the steps involved in integration of OBIA with EBS.
    It is very important for please.
    Rgards
    Srinivas Chindam

  • Can I change the default wait time to redial after a busy signal?

    If I fax using my external USB modem, and I get a busy signal, the system waits something like three minutes before redialing. Is there a way I can change that to 1 minute? I can't find the preference for that anywhere I've looked, but I'm betting it exists somewhere.
    Thanks in advance,
    rb

    I'm not sure this will work, but you can try it. ..
    Create a character style that does nothing but apply the contextual alternates attribute (check the box under OpenType Features inthe style defintion dialog). Then add a GREP style to your paragraph style to match the "a" and apply the character style you just created.

  • To change the default value in approval column of Approve time data view

    Approve working times in MSS
    For a manager:
    Approval view in approve time data iview has a column with name approval.  The value is defaulted to approve all. Can any one let me know how to change this value.
    Or  point me to any documentation which will be of help with this.
    ESS BP Version 1.41
    ECC 6.0 EHP4
    Thanks,
    John.

    Hi John,
                  uncheck the mass approval option in the Timesheet config.
    Cheers!!!
    Umang

  • Changing the default associated view for a related entity

    A question from a peer:
    Hey there
    Do you know how in CRM 2015 to change the default associated view for a related entity?
    Say you are in an Account and from the menu open the opportunities for that account.
    That new pop up window states “Opportunity Associated View” I want to change that to “My Custom View”
    I thought we covered this in class years back but cannot remember

    There are a few ways to get what you want, the easiest being
    Create a document as you want it for a particular site, save it is junk.php or similar and create a new file by saving as this as the proper document name such as index.php
    Use the Dreamweaver template system, i.e. create a template with a .dwt.php extension like template.dwt.php and use that to create new pages.
    There are other ways like creating your own php template system. But you can put that in the too hard basket.

  • I cannot change the default application program. It remains unchanged after attemting to change it.

    I wanted to change the default application proram to view .jpg files to Windows photo viewer. The default program is HP Photo Smart. I went to Tools Options, went to the Applications bar, and found the file type, attempted to change the program, but it did not change it to my selected Windows Photo Viewer. I closed Firefox and restarted it, but it did the same thing, even after logging out.

    I just successfully changed on my .docx to open into Pages. I went the same route that you mentioned... Right click---> Get Info---> Open With and changed it to Pages. When I clicked Change All, a dialog came up asking me if I am sure that I want to change all of my .docx to open in Pages. I click accept and tested it. Now my .docx open in Pages.
    So my question is, is your issue just applying to .ai files? Or is affecting other files, such as .docx? If it's just affecting .ai files, then there maybe an underlying reason for that. And it may not be able to be changed.
    Just a thought.
    KOT

  • Change the default entity in the lookup window in PhoneCall Form

    Hello,
    I'm trying to write a javascript to change the default entity in the lookup window for the 'from' field to use the Contact entity. Right now Account is the default entity.
    So this is what I have:
    document.getElementById("from").setAttribute("defaulttype", "2");
    var ViewGUID= "a2d479c5-53e3-4c69-addd-802327e67a0d";
    Xrm.Page.getControl("from").setDefaultView(ViewGUID);
    I got the code actually from this website #34: http://garethtuckercrm.com/2011/03/16/jscript-reference-for-microsoft-dynamics-crm-2011/
    I attached the function into the form and publish the solution however it's still showing Account as the default entity.
    Any idea is appreciated. Thanks.
    -tri

    Chitra Swaminathan wrote:
    Hello,
    We are using Lookups in our application which stores the locale specific information. We have a drop down in the UI which will give the language names like 'American English', 'Canadian French' etc. When chosen 'Canadian French' we need to change the nls_language in the db to refresh the contents in the lookup generated component to show in French. How to acheive this?
    We are able to switch the bundles, upon change in locale in the run time. But the AM setting - to set the DB session is what we are looking for. Would appreciate your help on this.
    Thanks,
    Chitra.to localize ADF-BC you need to set the jbo.default.country and jbo.default.language property to language value in Application module configuration
    other way is to override the prepareSession method in ApplicationModuleImpl class to call some JDBC statement to set the dbms_application_info.set_client_info to value of the language.
    if you can provide more details about your lookup table and data structures then one can be more helpful
    Zeeshan

  • Can I change the default for podcast deletion after listening?

    I have only just discovered that many of my cherished podcasts have been getting deleted after I listen to them. I originally set the option to NEVER delete after listening when I first installed iTunes years ago and I haven't change it since. However, I can only assume that it was changed by Apple during an upgrade at some point and I never noticed. The delete after listening option has been set to On for podcasts going back many years (2008 at least).
    Two questions:
    1. Is there some way to change the default setting to Off?
    2. Is there a way to bulk change the setting for multiple existing podcasts?
    Thanks.
    For what it;'s worth; I'm running iTunes 12.1.2.27 on Windows 7 64-bit on a Dell Latitude laptop.

    Choose the Podcast view you are using (either Podcasts/Podcasts or Podcasts/Episode List) from below:
    or
    and select Delete Played Episodes <Off> from the drop-down menu

  • HT5100 I want to turn off the autoplay feature.  I'd like ITunes to stop after one podcast.  The latest version has changed the default for playback.

    I want to turn off the autoplay feature in iTunes.  I'd like iTunes to stop after one podcast.  The latest version has changed the default for playback.

    Make sure that the system time and date on your computer are set correctly.
    If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    *Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    *Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
    You can see more Details like intermediate certificates that are used in the Details pane.
    Note that some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.

  • How can I change the default message after System Call Handler transfer error?

    Hi,
    I'm using Unity Connection 9.1 and System Call Handlers to allow to join internal extensions (not reachable from the PSTN).
    I succeeded but I would like to change the default message played when the extension dialed is not known. I tried with Error greetings but nothing changed.
    Thanks for your help.
    Regards,
    Julien

    Just tried this on my 9.1 and 10.0(1) servers and it worked fine.
    I went to the opening greeting call handler, selected the "error" greeting, set the greeting to play my personal greeting (it defaults to the system generated greeting), recording "hey, you dialed the wrong number" and then called in and during the opening greeting I dialed "88" - I heard "hey, you dialed the wrong number" and then it repeated the opening greeting recording as it should.
    the default action after playing your custom greeting in this case is to "restart greeting" - which is why the opening greeting plays again.
    Not sure what you did in your testing with the error greeting - check to make sure you have it set to play your personal greeting instead of the default system greeting - since you can't disable the error greeting there's not a lot of other items I can think of to check.

  • In Pages 5.1 how do I change the default spacing after a paragraph? I used to be able to do this with the inspector. I no longer see the option.

    In pages 5.1 I was wondering how to change the line spacing after a paragraph.

    This is from the online Pages Help . You have the option to the Help in your Pages Help menu
    Adjust line spacing
    You can adjust the spacing between lines in a paragraph, and change the amount of space before or after a paragraph.
    Click in the paragraph whose spacing you want to change, or select one or more paragraphs.
    In the Text pane of the Format inspector, click Style.
    Click the disclosure triangle next to Spacing, then choose an option from the pop-up menu:
    Lines: Choose when the distance between ascenders (parts of letters that extend to the top of the line) and descenders (parts of letters that extend below the line) should stay the same. The space between lines is proportional to the font size.
    At least: Choose when the distance between lines should remain fixed (but not to overlap if the text gets large).The distance from one line to the next will never be less than the value you set, but it may be larger for larger fonts to prevent overlapping text lines.
    Exactly: The distance between the baselines.
    Between: The value you set increases the space between the lines, instead of increasing the height of the lines. By contrast, double-spacing doubles the height of each line.
    Click the arrows next to the spacing field to set the amount of space for the option you chose.
    To adjust the amount of space before and after the selected paragraph, click the arrows for Before Paragraph and After Paragraph

  • How do you change the default save as directory when saving a PDF file to your hard drive?

    This is the on-line help instructions on this site:
    Downloading a PDF file to your hard drive
    You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
    To download a PDF file from a link:
    1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
    2. In the Save As dialog box, select a location on your hard drive, and then click Save.
    My issue:  I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in.  I got lots of directories and I wish I could change the default setting for the save as directory.  Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

    There is not a way to set the default location from all the forums i searched in the last couple days.
    Russ

Maybe you are looking for