Changing the default to location of Archiver data
Hi,
Is there any way that we can change the default location of the Archiver data. By default is goes to archives folder, i want it to goto some other folder.
Similarly when u take up the backup of site. i want it also to be stored in some other folder.
is it possible.???
For archiver see My Oracle Support Note
How can I move the archive directory? (Doc ID 449054.1)
Not sure what you mean by a back up. There is no built in Disaster recovery tool for UCM. Standard system back ups (file system and DB) for restore should be used.
Similar Messages
-
Want to change the default save location- users have networked home dirs
I am doing some work for a school which is still using iMovie HD because it allows them to save their movie projects wherever they want. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. Currently all users/students have network home folders, so their home directory, documents, etc all pull across the network. All students are limited to 1GB of space, and the system is an older G4 Server- 2GHz with 1GB of RAM and 2x 500GB hard drives. Since the students can make some large projects transferring that data back and forth can kill the server. Currently they are staying with iMovie HD so they can save it to the local hard drive, and when the student comes back in for class they sit at the same machine- thus giving them access to their stored movie files.
This summer they plan to upgrade both Xserves, but again internal storage in the Xserve is a joke and in my opinion not planned out properly. Which might require them to use one of the Apple Promise RAID units- major financial burden on a school.
I wanted to see if there was a way to change the default save location for iMovie 08 or 09 to the local storage rather then the "Home" folder for each user.
Thanks so much!hackths wrote:
.. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. ..
wrong info.
iM08/09 has a different file concept than iMHD6.
Both versions allow to store Events (=huge files) 'anywhere' to usb or firewire connected, hfs(+) formatted harddrives. the Project files (=small files) can be de-located from 'internal' drive with vers09, for 08 you have to use a socalled symLink to de-locate Project files. -
SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working
So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: Default-First-Site-Name
Roaming Profile: N/A
Local Profile: C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS CSE Policy
Windows SBS Client - Windows Vista Policy
Windows SBS Client Policy
Update Services Client Computers Policy
C-Create Syntiro Root Folders
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
Windows SBS Client - Windows XP Policy
Filtering: Denied (WMI Filter)
WMI Filter: Windows SBS Client - Windows XP
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
OPTI9020-01$
Domain Computers
System Mandatory Level
USER SETTINGS
CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS User Policy
Windows SBS CSE Policy
Small Business Server Folder Redirection Policy
U-Word 2013 Default Save Location
U-Office 2013 Disable Backstage
U-Office Disable Start Screen
U-Office Trust Center Settings
U-Word Autorecover Location
U-Word Autosave Interval
U-Word Disable Capitalization First Word
U-Word Set Arial Default Font
U-Word UI Customizations
U-Power Plan Settings
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
Domain Users
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
Windows SBS Link Users
Windows SBS Fax Users
Windows SBS SharePoint_MembersGroup
Windows SBS Folder Redirection Accounts
Windows SBS Remote Web Workplace Users
High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet. -
In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?
wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick
-
Power view in SharePoint - Changing the default save location?
Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Changing the default /Users location
Hey guys,
does anyone know a smart way to change the DEFAULT location of /Users in SL?
I wan't to create a system image with /Users on a second partition,
and i'm not talking about just ctrl-clicking an existing user and editing
the account prefs
Worked fine in 10.4 with NetInfo and in 10.5 with fstab/vifs.
10.6 anyway always creates an alias to /Users,
which i don't want because it makes our software-distribution go nuts.
Any ideas?
Would appreciate it...I edited /etc/fstab using vifs and added:
/dev/disk0s3 /users hfs rw 1 2
This is exactly what i did in 10.5 as well.
SL mounts /users to the other partition just fine,
but additionally it creates a link to /users on the system partition as well.
I.e., on the system partition i have Applications, Library, System and so on
AND a link to /user. That didn't happen in 10.5
On the second partition i have all the users folder, just how i wanted it.
I'm just curious why SL automatically creates that link
when i change the mountpoint of /users. -
Changing the Default Save location in Cap4
I know its possible to change the publish folder (Edit > Preferences) but what about the default Save location? Any clue how to change that from My Documents?
Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Need help changing the default download location in Firefox3.6.16
<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/808920]</blockquote><br>
I have been having default download location problem for over a year now and no one has been able to offer a solution so if you can figure this out, well, I can't say enough good about you.
Here's my problem. I'm an online math instructor for a college. I use Firefox 3.6.16, and have also tried the latest version. Os is Vista. Students email me Microsoft Word 2007 documents every day as attachments to email. I click on the documents, make corrections and when I go to save their document to my computer, the default always wants to save it in a temp file! I read where Firefox is supposed to default save in the desktop (which is where I want it to default to, but that never happens). When the save defaults to the temp file, I have to scroll up numerous files and find the desktop option and click it to save it on the desktop. This is not a huge deal until you have to do it for 90 students and then it becomes time consuming.
Numerous times I have followed the standard process of (TOOLS>OPTIONS>SAVE FILES TO DESKTOP) within Firefox but that never works. I've reinstalled Firefox, that doesn't work. I've also tried to change the "Save Options" settings within Word 2007 and that hasn't solved the problem either. Please advise if you have a solution. Thanks in advance!Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh -
How to change the default backup location?
SQL Server puts backups in a default folder C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup
Is there a way to change that to a different location?
I'm using Smo.Backup object in my code to create backups. The backups I create are stored in that default folder, but I was hoping that I can change that default location without having to make code changes.
Is that possible?
thanks.SQL Server puts backups in a default folder C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup
Is there a way to change that to a different location?
I'm using Smo.Backup object in my code to create backups. The backups I create are stored in that default folder, but I was hoping that I can change that default location without having to make code changes.
Is that possible?
thanks.
To read the value from the registry you can issue the following command:
DECLARE @BackupDirectory VARCHAR ( 100 )
EXEC master.. xp_regread @rootkey = 'HKEY_LOCAL_MACHINE' ,
@key = 'SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.2\MSSQLServer' ,
@value_name = 'BackupDirectory' ,
@BackupDirectory = @BackupDirectory OUTPUT
SELECT @BackupDirectory
This will provide the following output, since we changed the value above directly in the registry.
If we want to change this back to the default folder we can use the following command
EXEC master.. xp_regwrite
@rootkey = 'HKEY_LOCAL_MACHINE' ,
@key = 'SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.2\MSSQLServer' ,
@value_name = 'BackupDirectory' ,
@type = 'REG_SZ' ,
@value = 'C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\Backup'
If we run this command again we can see that this has changed:
DECLARE @BackupDirectory VARCHAR ( 100 )
EXEC master.. xp_regread @rootkey = 'HKEY_LOCAL_MACHINE' ,
@key = 'SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.2\MSSQLServer' ,
@value_name = 'BackupDirectory' ,
@BackupDirectory = @BackupDirectory OUTPUT
SELECT @BackupDirectory
To determine where SQL Server is installed you can right click on the server name, select Properties. The root directory as highlighted below will show you the corresponding install name for the instance such as "MSSQL2" highlighted below, so you know which registry entry needs to be changed. -
How do I change the default save location
I want to be able to save the projects in a different folder. How do I change the setting so that it saves on a connected Firewire drive?
when you import a new Event, iM asks you for the location...
the dialogs look a little different for 'import from camera' any 'by file'
or ... -
I just upgraded OSX to Mountain Lion and Pages to 4.2, and because OSX is syncing with my iCloud account, when I go to save a new file in Pages it defaults to try to save to my iCloud account rather than giving me the folder structure on my hard-drive that I prefer. It requires two extra steps to save to the proper place in my Documents folder on my hard drive.
Is there a way to reset the default so that when I go to save a new file, the folder structure opens to the last saved folder (like it does in other non-iCloud applications) rather than defaulting to my iCloud, and to do it without just removing documents from my iCloud account entirely?
I checked the Preferences for both Pages and iCloud and found nothing about this.What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination. -
How can I change the default download location in Firefox 4
Downloads go immediately to the Download folder. I want to change to a different location. Cannot find the right place to change this in Firefox 4.
Click on the Firefox icon, then:
Tools > Options > General -
How can we change the default folder location (avoiding problems with Temporary Internet Files)
(Environment in question: Windows 7 secure desktop (running as user not admin), Office 2010)
Hello,
As has been touched on in various forums (such as here: http://forums.adobe.com/thread/797451), when one opens a PDF attachment in Outlook, Acrobat and Reader store the file in the "Temporary Internet Files" folder (f/k/a OLK folder in previous versions of Outlook. There are two major problems with this:
First, as Microsoft has documented in http://support.microsoft.com/kb/817878, attachments end up here staying here under certain conditions (go checks your now, you'll find some!), which ends up being a file attachment no man's land, and that can present security risks (e.g. if data we thought was deleted still lives in that folder).
Secondly, the first time you open an attachment in Acrobat and do a Save As, Acrobat is defaulting to the Temporary Internet Files location. This folder (as noted in the thread linked above) is ridiculously hard to get to for the average user, so they can end up storing a file and then losing it.
We've found that if we open Acrobat once, do a save as, and change to the users Documents folder, the change sticks. But how can we have Acrobat default to Documents instead of that temporary location?
Any help is greatly appreciated.Have you check to see if Acrobat sets a registry entry or file preference for the first Save As? That's where I would start looking. Process Monitor is a good tool for this.
-
How do I change the default save location for Preview under Lion?
I have to modify about 200 PDFs.
When I make a duplicate of a PDF in Preview it always suggests saving it on the desktop. Instead I would like it to ask me if I want to save it either where the original file is, or where I saved something last.
Note that Default Folder X doesn't yet work with Preview. And even then it wouldn't solve my problem.What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.
Maybe you are looking for
-
Problem: There is 1 website which I had downloaded a pdf from in the past, now this download window continues to popup every couple minutes with a window for me to download again. When this download windows opens I have to click "cancel" repeatedly t
-
CF10 tags extension to Dreamweaver
Hi fellows, Anyone know where I find the CF10 tags extension to Dreamweaver CS 5.5? I saw in the forum the guys talking about the cf10dreamweaverextensions.mxp to make the download, but I dont found. Where I make the download for this extensions? Tha
-
HTML Standard/Minimal doesn't work in Safari browser
Here's an issue that has been bugging me for quite some time, it's more of a bug and I finally decided to post it in the forums. I have an Item on a page for which the Display Type is set to HTML Editor Standard, the problem is that it works fine in
-
Can a cipher use any type of key?
I was wondering if it is possible to load a symmetric key from a keystore and use it in a cipher. Do ciphers only accept symmetric keys?? I know that the jks keystore only supports asymmetric keys. Is there a Bouncy Castle keystore that stores symmet
-
IS IT POSSIBLE TO REDIRECT THE OUTPUT TO ANOTHER PAGE?
Hi all, Is it possible to redirect the output when I excute my query in iSQL*plus to another predifined html page? If yes how do I do this? Thanks a mill