Changing the format of "Table of Contents"

I am attempting to build a book from a Genealogical Generational listing that indicates the generation number at the beginning of each section. I also add that number along with the section page number at the bottom of each section. i.e. Generation 1  page  n.
Is there any way to automatically pickup the section title to add into the "Table of Contents"?
Using my present method, highlight the section title, click "Paragraph Style" (edit to my preference); will show only page 1 for all section beginning pages and seems unprofessional. alternatively, I could just leave out the page number somehow and attempt to "Tab" the first page of each section. Basically, what I would like is:
"Generation 1
Generation 2" etc.... or something similar without page numbers and the section name is the page link to the first page of that section.
Tks
Sparkgapper
Message was edited by: Sparkgapper
I am attempting to repost this on Pages from Numbers and it is telling me I am not authorized "to move this content to that place."
In doing "normal typing" I hit return at the wrong place and it was posted on numbers BEFORE I could correctly change its location of posting.
Sparkgapper

This is incorrectly posted AGAIN. Someone, please remove this discussion.
I hit return before making the change to PAGES from NUMBERS.
Sparkgapper

Similar Messages

  • Is it possible to change the style of Table of contents?

    Is it possible to change the style of Table of contents?
    Like -> left, middle, right
    Change the Text instead of Table of contents

    The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
    My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

  • I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

    I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

    That is not the issue.
    Pages/OSX does not save files with crop marks and bleeds.
    It also by default saves transparency, which is involved in a lot of Pages' better features, at a rubbishy 72 dpi resolution.
    It also makes it extremely difficult to maintain mono-color like black only text, has no spot color and makes color management opaque.
    It really is only meant for amateur publishing and printing to your desktop printer.
    A commercial printer who is willing to use and print from Pages may have better results but at the cost of considerable micro-management which defeats the point of this "cheap" solution.
    Peter

  • How to change the format of a cell in a web report

    Hello experts,
    Is it possible to implement this in a Web Report/BEx query?
    We have a list of products grouped into Company A and Company B. One key figure is for example Net Cost Price.
    We need to highlight the lowest net cost price in every company but with a different colour depending on the company assuming prices are sorted in ascending order.
    We have been recommended to use Web Design Api for Tables but we understand that in order to format a cell content we need to know the axis position of the cell but we don't know how many rows the query will display for every company. Is this kind of requirements only possible with "static" reports where we know exactly the number of rows and columns that are going to be displayed?
    This is an example.
    COMPANY      PRODUCTS    NET COST PRICE
    Company A    Product 1    <b>5€</b>
                 Product 2    10€
    Company B    Product 1    <b>10€</b>
                 Product 2    20€
    Any help would be very much appreciated.
    Thanks in advance,
    Inma

    Hi Inma,
      If you have already not solved your problem , you can try the following solution with table interface class.
    Table interface class generates HTML table row by row so it first process the charecterstics and then KFs .
    You define a  attribute(type public) in class and set that attribute to X (In CHARECTERSTIC menthod)when ever the company code changes.
    Then make use of that flag in DATA method to change the format of cell (Assuming you sorted by Ascending).
    hope this helps.
    Regards
    Madhukar

  • How can i change the Format of my DATE column?

    I need to change the date format for a whole column. At present i can do MM-DD-YYYY. I need to change this this to DD-MMM-YYYY.
    I know about the to_date function, i tried to apply it to change the format of my whole column by doing the following.....
    CREATE TABLE "IT220_DATEHOLIDAY"
    "DEPARTID" VarChar(2)NOT NULL ENABLE,
    "HOLCODE" VARCHAR2(2)NOT NULL ENABLE,
    "DEPARDATE" DATE,
    to_date('DATE','DD-MMM-YYYY'), <<<change DATE column to DD-MMM-YYYY
    CONSTRAINT "DATEHOLIDAY_PK" PRIMARY KEY ("DEPARTID") ENABLE
    ORA-00902: invalid datatype <<<<This was the error message i received.
    I am aware that the to_date function is supposed to be used to change strings into a certain format. I guess this means you cant do it with columns? Is there anyway i can format the whole column or do i have to do each string of data entered one by one?
    Thanks in advance!

    Hello Jay,
    I'm not sure you hit the right forum, as this doesn't seem to be a problem with APEX.
    Anyway:
    You can't use that function on a table like that, and as you already suggested, the to_date-function expects a string value.
    It seems you also have a misunderstanding of the basic datatypes in the database. DATE is such a datatype and is stored an internal format you don't need to care about. Each time your request the value, the database will give you a string representation according to either your locale or you give a certain formatting mask.
    The same applies to insert or update operations: you hand in either a variable of type DATE or use a function like to_date to create an "object" of type date.
    You may be interested in reading the documentation of the [url http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm]Oracle Database Concepts. The section concerning datatype DATE can be found here:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/tablecls.htm#CBBGJHJC
    An overview of formatting options can be found here:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements004.htm#SQLRF00212
    So to answer your question: You would format it as part of your insert operation, taking a string and convert it using to_date.
    -Udo

  • How do you change the format of glossary terms?

    I have entered a number of terms in my glossary, along with the definitions. When I preview the book on my iPad, the definitions come up when i touch them, but the box has white text on a white background. How do I change the formatting of the definitions?

    Format/Advanced/Define Default Glossary Style.
    See http://www.dummies.com/how-to/content/how-to-set-default-styles-for-objects-in-i books-au.html

  • HT4007 I Just updated Apeture to 3.3.2  Now there are some photos that I receive a message..."Unsupported Image Format"  Are there lost?  can I retrieve them?  can I change the format?  Help...?!?

    I just updates Apeture to version 3.3.2 after installing Mountain Lion.  There are some photos in Apeture that now say, "Umsupported Image Format".  Are these lost?  Can I retrieve them...how?  Can I change the format so that I can see them again?  Help?!?

    Are these images "Raw" images? What is the make of your camera?
    Check the version of the Digital Camera RAW Compatibility Update that is installed.  The version of the raw support is shown in the About panel: from the main menu bar:
         Aperture > About Aperture
    Download the latest Raw Update from here:
    Digital Camera RAW Compatibility Update 3.14
    If you have the latest raw support installed, but Aperture does not recognize the format, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
               Re: Aperture 3 preview of raw file greenish
    But also read the following post, that explain how this is supposed to work and to correct the typo in the command
    In short: Quit Aperture, open the terminal, paste the  follwing text in (all in one single line) and hit return; then reboot the system.
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
    Regards
    Leonie

  • My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

    my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

    Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
    Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
    That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

  • My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

    My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

    If the media is in the library then yes it is that simple. Connect the device, load it up with your media. The problem is when you try to connect a full device to a new empty library on a new computer when iTunes will offer to replace the content on the device with that in the local library, i.e. nothing! (For anyone in that position see Recover your iTunes library from your iPod or iOS device).
    You should be able to add your devices at https://supportprofile.apple.com/ though I'm not sure what happens if the second hand iPod was previously registered.
    tt2

  • How do I change the format of my 5th Generation iPod from Windows to Mac

    How do I change the format of my 5th Gen iPod from a Windows format to the Mac?

    But this will delete all the songs I have? I have a lot of them on my iPod classic
    Yes.
    I want to transfer (well copy) all my songs from the iPod to itunes on the mac - and then have the itunes library as being placed on the external drive. The last part I think I know, but I can't work out how to copy music from my iPod
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    Then see here about backing your iTunes library onto an external hard drive.
    iTunes: Back up your iTunes library by copying to an external hard drive
    B-rock

  • How to change the Safety Intervals for standard Content datasources

    Go to RSA2->give your datasource name ->setting up GEN delta
    It shows you whts the safety interval setting.
    <b>
    How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
    Thanks
    Soniya Kapoor

    Hi Soniya,
    1) try  RSA6.....also  RSA8 for additional info.
    2) useful link:
        http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
    Good luck, BB

  • To change the format of the list

    Hi Guys ,
    I have schduled a batchjob its a report program runs every week and after completion of the job it sends mail to the concerned guy  with the details of the report .Its an Standard report everything is configured by using SM36 transaction .
    Everything is fine but we have to change the format of the report to CSV could any one can guide me how can we change the format .
    Thanks in advance,
    Sathish.M

    CSV means a text file, where the columns are separated by a character ";".
    The best way to change a list to CSV is to create an internal table in the ABAP, with the structure of the required CSV.
    You have to fill in this internal table.
    Because you are running the program in background, you can't download the file, the best would be to store the file on the server in a separated directory.
    Regards
    Tamá

  • Can you change the format when converting pdf to excel?

    example.  I'm trying to export a PDF file to excel.  However, the PDF file isn't in a table/spreadsheet format so when it exports to excel, I can't sort at all.  It doesn't convert into any sortable columns.  Is there a way to change the format on the convert?  Or is that an edit in excel?

    Hi, jsking.
    I'm sorry for the issues you're having. Without seeing your file, it will be difficult to diagnosis your issue. Can you send us a copy of your PDF file via this form and we can take a look? In the form, include a link to this forum conversation, so we have this additional context.
    You may be able to do some post-editing in Excel to copy the data into sortable columns. OR, you may want to try first exporting the PDF to Word and then copying/pasting the data from Word into Excel - it's possible that may give you a better result.
    But with a little more information, we may be able to help you more.
    Dave

  • Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

    Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

    jpg does not support Layers.
    Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

  • How to change the format in sap script

    Hi,
    I am working on a report which calls a sap script and i have to modify the script i.e. the values which are displaying in it. i had never worked on SAP SCRIPTS ,plzz provide me guidlines how to change the format of the data displayed in it.

    hi,
    this will give you the whole idea about the scripts in SAP the t-code is SE71.
    refer this link::
    [SAP SCRIPTS|http://help.sap.com/saphelp_40b/helpdata/en/d6/0dc169494511d182b70000e829fbfe/applet.htm]
    [WIKI|https://wiki.sdn.sap.com/wiki/display/ABAP/FormPrinting-SAPscript%2CSmartforms]
    regards
    sarves
    Edited by: Sarves Sombhatla on Feb 20, 2009 1:38 PM

Maybe you are looking for