Changing the paper each page is printed on, printing PDFs

I use ABCpdf to create a PDF in C#. PDF letters are then appended to this, with 0 to many PDF brochures appended after each letter. What I need to do is print the letter out on letter head and the brochures out to blank paper (Assuming the letter head is in tray 1 and blank paper in tray 2).
Page 1Letter1
Page 2 Brochure1
Page 3Brochure2
Page 4 Letter 2
Page 5 Brochure1
So above, I need to print in that order (so each customer gets the correct number of brochures per letter), but with the two letters going to letter head and 3 brochures printed to blank paper. For the above, it could be possible to create two PDFs for each letter instead of one large one (but this would result in many prints jobs being sent for large jobs). Can anyone see a solution for this?

Post Author: crystalighter
CA Forum: General
What would make it easier was if there was a function to enable the use the special field for {horizontal page number} on places other than only the virtual page.
Why is there not a function?  There is one for pagenofm.
Or could someone share a way to use the special field for {horizontal page number} in formulas?  Being able to capture the value in a global variable would be a great assistance, but it seems to be impossible.
If the source code for the function pagenofm was available we could see how they did it for the special field for {page n of m}.
I am using XI and have been unsuccessful in getting a global variable to accurately reflect the number of pages with a value for the {horizontal page number} included.

Similar Messages

  • My Mac Book Pro changes the saved home page each time I start Safari.  I also get new tabs that randomly open asking to clean up my Apple

    My Mac Book Pro changes the saved home page each time I open Safari.  I am also getting random tabs opening with various "cleaning up" my computer junk.
    How do I get rid of this?  I tried some of the fixes listed but they don't seem to work or I am doing something wrong.
    THanks
    Wendi

    You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
    Back up all data before making any changes.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
    Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • How to change the paper type in printer settings?

    Does anyone know how to change the paper type in printer settings?  I'm trying to have the ability to change it to photo paper from Photoshop Elements.  I can't find the option in printer settings or through Elements.  I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
    thanks!

    It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

  • How do I change the paper size in an existing Pages document?

    How do I change the paper size on an existing Pages document?

    So are your text box set to floating? You can tell that by looking in the Inspector>Wrap Tab when you select the text box.
    If I had to guess I would say that the text boxes are floating and when you change the size of paper the text that you have in the main body area is shrinking so that it does require as many pages and you are losing the text boxes at the end. Is that correct? If so, they are still there, you just have to add page breaks to get to the pages that you lost and you should see them again.

  • Just upgraded to Win 8.1: PSE 11 now will not let me change the paper size and type in the print properties.

    I have just upgraded to windows 8.1 but my photoshop elements 11 now will not let me change the paper size and type in the print properties.  Also some of the property popup boxes just flash on the screen but do not stay displayed!

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The D7100 requires Camera Raw 6.5 which is compatible with CS5.
    In CS5, click Help > Updates to update Camera Raw to 6.7 and you'll be able to open and edit Raw D7100 NEF files.

  • How can I change the number of pages in a spread?

    I imported a document that our PR department used to create in Quark into InDesign 5.5. They have it set up in four-page spreads. However, the document has always been printed with a coil binding with a large graphic on each left-hand page and text on the right page. I would like to convert to using two-page spreads. However, none of the places the InDesign help leads me give any indication of changing the number of pages per spread.
    My problem may be related to having imported from Quark, but if there's an easy way to change this, I'd appreciate hearing about it. Thanks!
    -Brian

    In the pages panel select the spreads then right-click and check Allow Selected Spreads to Shuffle and also Allow Documrnt pages to shuffle. If asked if you want to maintain the current page arrangement say no.

  • HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

    I have a new HP Officejet 7500A Wide Format All-in-one printer.  I love it and have had no problems with it...until now.  The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11.  I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties.  I also checked the printer utilities...letter size paper is selected.
    But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel.  I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
    I changed the printer back to factory settings.  Nothing.  I just had to reset up my printer on my network, but it still won't print.  I tried to re-install the printer software from the installation disk, but it won't install.  It says "already installed".
    HELP!!!!!!  I honestly don't know what to do at this point!!!!!
    Thanks in advance!!

    I have struggled with a similer problem with my new 7500A.  I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle.  As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer.  I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up"  then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen  "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there.  Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc.  I've solved the problem without going to those lengths, no thanks to HP.

  • How to change the paper format in SOST tcode from X_65_80 to X_65_266?

    I got data from OTF in SAPSCRIPT and send by email.
    How to change the paper format in SOST tcode from X_65_80 to X_65_255?
    I need to change it automatically from abap.
    Any suggestion?

    Hi,
           change line size and line count in report.
            By default report line size and line count is taken in printer
           settings
    REgards
    amole

  • How to change the paper orientation for IP19

    Hi,
    I need to take the print out for one year. for that I want to change the paper orientation from portrait to landscape for IP19.
    Please help me how to change the paper size.
    Thanks & Regards

    Dear Chris,
    Once after executing CS11,you can download the report to an excel format or a rich text format or
    unconverted format.After executing press ControlshiftF9 to save as a local file.
    then from that file you can change the printer settings as you require.
    Check and revert back.
    Regards
    Mangalraj.S

  • How to change the paper orientation for CS11

    Dear guru ,
    I want to change the paper orientation from landscape to portrait for CS11.
    Please help me how to change the paper size.
    Thanks in advance

    Dear Chris,
    Once after executing CS11,you can download the report to an excel format or a rich text format or
    unconverted format.After executing press ControlshiftF9 to save as a local file.
    then from that file you can change the printer settings as you require.
    Check and revert back.
    Regards
    Mangalraj.S

  • Using "View Selector" in the List View Web Part, changes the web part page to the view selected's page.

    Hi,
    I am relatively new to Web Parts pages.  I created a page with list view web part and a Infopath Form Web Part, which are connect via the "Get Form From" option.  My users would like to be able to use views dependent on what
    they are looking for.  So I created different views.  However, when I select the view from within the Web Part, it changes the web part page to the list view page.  I must be doing something wrong.  How do I configure the list view to show
    the selected view and results within the existing "list view web part"?
    Thanks,
    Dwayne

    Hi
    Lindali,
    Sorry, but this has not been answered to my liking.  The "List View Web Part" has the ability for the user to select the view from within the web part, so there you should be able to select a different view and have it appear within the same web part. 
    Does anyone know how to complete this task?
    Thanks,
    Dwayen

  • Unable to change the default login page

    I would to change the default login page (to /content/ethz_ch/Login)
    I configured tha page by "Day CQ Login Selector Authentication Handler":
    In ./launchpad/config/com/day/cq/auth/impl/LoginSelectorHandler.config I see
    auth.loginselector.defaultloginpage="/content/ethz_ch/Login"
    as expected.
    I then configured a page (/content/ethz_ch/de/auth_test.html) with a closed user group and left the login page field blank.
    Instead on the newly defined login page I am redirected to
    https://..../system/sling/cqform/defaultlogin.html?resource=%2Fcontent%2Fethz_ch%2Fde%2Fauth_test.html&$$login$$=%24%24login%24%24
    Any idea on what I am doing wrong?

    Try 1 & 2 if does not work please file a daycare for further assistance.
    1.   In "Day CQ Login Selector Authentication Handler" for path info add an empty row then verify.
    2.   Delete the existing entry for "Day CQ Login Selector Authentication Handler" , Configure your custom at repository level & verify

  • How do i change the quality settings of my printer? the options are there but greyed out!

    how do i change the quality settings of my printer? the options are there but greyed out! ie on my old HP I could print in draft if i wanted to print a doc to read and then bin...the option/box is there but greyed out so I can't select. HELP!!!

    You can change the background display color in the playback preferences, either black, white, or checkerboard. This does not change the output color. If you want to add a color to the video, you have to place a custom generator underneath your video and change the color in the inspector.

  • I can change the language of pages 5.5.1 to catalan?

    Hello everyone,
    I want to know how I can change the language of pages 5.5.1 to catalan? since I live in Barcelona and I need it.
    greetings,
    Sergio Garcia Rodriguez

    Are you talking about spellcheck?  If so, see
    http://extensions.services.openoffice.org/en/node/1205/releases

  • How do I change the language in Pages 5.1?

    How do I change the language in Pages 5.1? It used to be under Inspector, but it's not anymore. I need to be able to type and spell check in English and in French.

    http://help.apple.com/pages/mac/5.1/?lang=en#/tanf3d8c3e49

Maybe you are looking for