Charts in WAD 7.0

Hello Guru's
Iam Currently using WAD 7.0
Can anyone suggest how to bring values inside the charts.
Regards,
KK

Hello,
Follow these steps:
1. Insert the Analysis and Chart Web items into your Web template. Set the required parameters and link both Web items to the same data provider. For the initial display type, set the Visibility parameter of the Chart Web item to Hidden.
2. To allow users to toggle the display type, choose the Dropdown Box Web item and drag it to your Web template using drag and drop.
3. Choose the data binding type Fixed List of Options from the parameter list for the Web item. This allows you to define your own commands for each entry in the dropdown box.
4. In the fixed list of options, enter a text (such as "table") in the Description of Selection field. This text can be language-dependent.
5. For the corresponding command, call the command wizard by choosing the pushbutton (see Commands).
6. On the All Commands tab page, choose Commands for Web Items. Select the command Set Web Item Parameters (SET_ITEM_PARAMETERS) and double-click it to choose it.
7. Since the table must be switched to visible to select the table display type in the Web application, choose the Analysis Web item for Target Web Item. All parameters for the Analysis Web item are now displayed.
8. Set the Visibility parameter (VISIBILITY) to Visible (VISIBLE). Do not accept the default value.
9. Since the graphic display must be switched to hidden to select the table display type in the Web application, choose Next Command in the command wizard.
10. Insert the Set Web Item Parameters (SET_ITEM_PARAMETERS) command again.
11. This time, choose the Chart Web item as the target Web item and set the Visibility parameter (VISIBILITY) to Hidden (HIDDEN). Do not accept the default value.
12. Repeat steps four to eleven for the dropdown box entries Chart (switch Analysis Web item to hidden, Chart Web item to visible) and Table and Chart (switch Analysis Web item and Chart Web item to visible).
Let me know if case any issues or formatting probs
~AK

Similar Messages

Is it possible to develop the control charts in WAD.

Hi Gurus and Experts
We need your suggestions to go futhure with our requirement.
Right now KPI's are currently displayed in graphical form with the
ability to drill down into WO's( Work orders) from the graph page. our
new requirement is to get exactly the same set of information captured
and presented in control chart form. This is to be an adjunct. to, not
replace, the existing graphical set of data. Upper and lower control
limits will be set initially by the business, and the same drill down
functionality should be available from the control chart. The charts
can be displayed seperately from the exisiting set of charts if this
makes it easier.
Can you please suggest us whether is it possible to develop the control
charts and also have the functoinalities of the existing dashboards
(example drill down of WO's using the control charts) in WAD or through
viusal composer
Waiting for your responses..
Thanks
Ravi...

Hello dj_page!
Thanks for the answer, but I know this already.
My problem is, that the small picture in the side panel and the histogram in LR5 are bigger than in LR4.
The two pictures are showing the difference between the versions.
On the left hand (LR4) you can see a smaller preview and histogram than on the right hand (LR5).
In each version you can change the size of the side panel only as small as the preview-window is.
The pictures are also showing the smallest size of the side panel in each version.

Line chart in WAD

Hi.,
I want to create line charts in WAD. But when i execute the report it is showing in a single vertical line. But in bar charts it is showing correctly. Please guide me to create reports.
Thanks,
Venkatesh

Hi
Charts displays the data Graphically..
So Chart is the Web Item in WAD which is existing in the standard Webitems Area. Select the web item and Double click to get in to the work area and now after that we need to assign the Data Provider to that. By assigning this the data will be displayed in the Graphical mode.
and also please see the link. it would be helpful to you.To know what are the types of charts and corresponding classes, And in the link if you drill down you will see Formatting a chart using Wizard, Defining chart properties etc.,
http://help.sap.com/saphelp_nw70/helpdata/EN/d2/02223c5f00612be10000000a11402f/frameset.htm.
Hope this helps you
Many Thanks
Kiran

Inserting Custom Charts in WAD

Hi There,
I want to Insert Custom charts into WAD. (BI 7.0)
Is there a way to do this.
Does MIME support upload of charts?
Please give me a link to edit CSS sheets if anyone has it.
Thank You All.
Regards
Joga

Hi vasu
chk with categories of values
like as per query colums the category values are assign,
chk with order and set the values and chk once for query properties and template properties also,thn chk axis values make as automatic becoz bydefault we have userdefined thr

Results row charting in WAD

Hello, I have a question regarding charting only the results in WAD. Currently, I have a % Lot Acceptance Calculated Key figure and in my Rows "Vendor" Upon executing, I get each individual Vendor counts which fall in the % Lot Acceptance bucket. I then retrieve the results, summed up view but when I chart this in WAD, I do not want any low level results but only the rolled up results. Currently WAD will not chart the results row.
Any suggestions on what approach I should take? Should I possibly be pre-calculating the % Lot Acceptance in the Update rules and create a new field % Lot Acceptance which holds the "resulted" value? Should I utilize Virtual Characteristics/Key Figures? Thanks for your help in advance.

Arun, thank you for the welcome in the other thread.
I've tried your suggestion to remove any drill downs to get the "resulted" view but in doing so once I remove the characteristic Vendor from the rows, I do not get a value for any of the buckets. The Characteristic Vendor needs to be in the rows in order to get any values. But this in turn of course brings in each vendor which I somehow want to hide in order to get the resulted view to chart in WAD.
I've tried switching the results from Row to Column but that does not seem to be helping.
Thank you again for the suggestions.

Chart In WAD 7.0

Dear Gurus...
I have some problem with chart in WAD. I dont know whether this is a bug in WAD 7.0 or I dont know how to do it :P.
The problem is like this.
I have query where row item is gross revenue and coloumn is [fiscal year/period] where I place [fiscal period] attribute under the fiscal year/period. The properties of [Fiscal Year/Period] will be no display since I only want to be display the Fiscal Period Attribute.
When I run it in Analyser, it work fine where the coloumn give me Jan, feb, mar, and so on.... but when I place the query as a dataprovider for the chart in WAD, the text jan, feb, mar, and so on didnt come out...
anybody know how to display the attribute in WAD?
Thanks in advance for the replay
Regards,
Tienus Sugiarto

After implementing note 1003344 for an other issue, charts are now working.

Facing problem with displaying of charts in WAD

Hi,
When i try to display graph(charts) in WAD i get this error :
" Internal erroe while communicating with IGS "
Can anyone please help me with this, also if there is some doc available on the use of Charts in WAD or some doc on how to use features in WAD.
thanks in anticipation
Regards
Suchitra

Hi Suchitra,
The IGS is the Internet Graphics Server which runs as a service and is reqd when you need to render graphics, like charts in your web application. The following links have additional useful info:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a73eac90-0201-0010-0e91-fdebfa436619
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdfbb990-0201-0010-d78b-81e475fc1010
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a245e690-0201-0010-4393-ef078d3ad0ed
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef
Hope this helps...

How to combine two types of charts in WAD

Dear experts,
I need to create a chart in WAD that displays 12 columns and 1 line. This is the structure of my query:
Rows :
Operation Code
Columns :
Total Capacity
Month 1 Requirments
Month 2 Requirments
.....Month 12 Requirements
I would like to show the monthly requirements as bars, but the Total Capacity as a single straight line accross all 12 months.
I tried to create a bar chart with 13 series. 12 of the series were bars and 1 was a line, but this didn't work. I just got a single "dot" for the Total Capacity instead of a continuous line.
Any suggestions would be greatly appreciated!
Thanks,
Kathryn

Hi Kathryn,
What i understood that your requirement is to create a graph with 12 bar columns and 1 line colmn.
this is you can achieve in the wad.
when we create a chart, in its properties, you can specify the bar or column or line for each key figure in your query. I dont exactly remeber the step number which gives you this option, but when you create chart, right click on it edit the chart, there comes a chart wizard (5-6 steps), in 3 or 4th step you have this option.
I had same requirement and did this. But rite now i dont have access to server so cant tell u exact step number.
Thanks
Dipika

Creating Chart through WAD

Hi,
I am developing a chart throgh WAD for purchases against vendor.
Here on X axis I want to assign Vendor & on Y axis I want to assign Purchase value against Vendor.
Please let me know how to assign values for X axis & Y axis while developing a chart in WAD.
Thanks,
Pradip

Hi Pradip,
you need to give query as dataprovider to your chart.
Create your query with Vendor and PO value KF. Use it in WAD as DP.
Choose chart as per your requirement (Bar, Pie, lines etc).
You can refine chart by right click on it and say edit...
Check swap axis box on web item properties tab.
Hope it helps...
Regards,
Ashish

Is it possible to create column chart in WAD

Hi All,
I would like to know if it is possible to create WAD -column chart in BI
Regards,
Sampda.

Though Arun has almost answered your query, gues this might also be helpful to you.
You can create and here is how to do it SAP recommended way:
http://help.sap.com/saphelp_nw04s/helpdata/en/c9/08533b97037963e10000000a114084/content.htm
Cheers.
Ray.

How to Display result value on Pie chart in wad

Dear Experts,
I'm useing WAD to create web template, in that I have a requiremnt to develop Pie chart and it should show material cost according to material type for each slice on Pie chart. I have developed a WAD template for the same and Pie chart as well but I can not see the respective material type cost on Pie chart, where as I can see those values in tool tip when I move mouse over the pie chart, I understand I'm missing a small setting can you please help me to find that setting so that user can see values directly on pie chart without moving the cursor on the same.
Thanks and Regards,
Chandrakant.

are you r using wad 7.0 or 3.5
in 7.0 right click on the graph, edit nyou wil be in the wizard go on step 3 and try to change the series and make sure visilibility is checked
if this doesnt work then click refine and go to series and make sure show lables are checked.
try this.

Formating will of the Cone chart in WAD?

Expert's,
We have prepared a Cone chart and in WAD and formated the chart with some description.The chart is working in fine with the description given.But once it mooved to QUA the description and the some numbers what we have written around the cone chart got disturbed.
Any one of suggest why this is happening.?
Points will be definitely assigned for the proper answers.
Thanks,
Vasu

Hello ,
If you had used BW Text program, for example
<SAP_BW_TEXT PROGRAM="ZEW06_TRANSLATE_HTML_TEXT" KEY="001">
then you have to transport them seprately to quality along with your web templates.
I guess there may not any problem other than that.

Combo chart in WAD

Hi All,
I have two queries one is displaying Current week Sales and the other one is displaying Previous week sales.I have assigned the column Chart for Current week query in WAD,i want to display the last week data also in the same chart as a Line graph on top of the Column chart .is that possible?
Thanks & Regards
Naveen

Hi Naveen,
You have to include both these values in single query. KF1 - Current Wk value & KF2 - last Wk value.
Then yu can assign diff. types for thee series.
Regards
SS

Create Gantt chart in WAD 7.0

Hello. I have been attempting to create a Gantt chart in the Web Application Designer 7.0 with not much luck. I have researched looking for various sources of documentation (including SAP help) and the documentation is rather vague. From additional documentation I have been able to find it appears as though my query is setup properly. However, my data will not appear properly on my chart. I am suspecting it has something to do with how I have my Category and Series axis setup perhaps?
Does anyone have any tips or examples to share when it comes to setting up the chart in the WAD that might be helpful?
Kind regards,
Lynn Peter

After implementing note 1003344 for an other issue, charts are now working.

Attach Mulitple queries in one Chart in WAD

I have 3 separate BEx queries. Is it possible to assign these 3 queires to one bar chart or graph in WAD?

Hi,
You can have mulitple queries but At any point of time,you can assign only one query with any design item say Chart or Analysis item.If you want to change the query to be assigned then you can chnage the assignment in the Properties of that particular design item.
Rgds,
Murali

Charts in WAD 7.0

Similar Messages

Maybe you are looking for