Check Box Fields

I am creating a form that has conditions that a person must follow. I need to set up a way to capture other conditions that haven't been included. I'm trying to figure out if there is a way to select other and have it automatically create check box fields and if it has the ability to have more than one field that comes up.

To recap...
Drop-down list - The drop-down list is part of a subform where a subform represents a page. Next and previous buttons are used to page up and page down through the subforms. The form was defined as a static form. Defining the form as a dynamic form resulted in the proper behaviour.
Checkboxes - The form contains check boxes that are untitled. Untitled check boxes do not get a binding definition. Since the three check boxes in row 1 were all untitled there was no binding definition. Defining each checkbox with a name, which propogated to the binding definition, resulted in the proper behaviour.

Similar Messages

  • How to insert check box fields in a htmlb: tableview

    Hi,
    Can anybody tell me how to insert check box fields in a htmlb: tableview in a sequence of rows in a table view. How to generate the sequence no for the checkbox inorder to know the row that is checked.
    Thanks in advance,
    Aruna.

    Here is the code which has the custom "Checkbox" in the tableview & Triggers the event. <b>You can identify the checkbox based on cell ID (p_cell_id)</b> in the method "IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START" & Based on the event name + Cell ID. Look at the code & let me know if you any issue.
    <b>Layout:</b>
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content id               = "content"
                   design           = "design2002+design2003"
                   controlRendering = "SAP"
                   rtlAutoSwitch    = "true"
                   forceEncode      = "ENABLED" >
      <htmlb:page title="Test " >
        <htmlb:form>
          <%
      data TV_ITERATOR Type Ref To zcl_itr.
      data iterator type ref to IF_HTMLB_TABLEVIEW_ITERATOR.
      create object tv_iterator exporting appl_cons = application.
      iterator = tv_iterator.
          %>
          <htmlb:tableView id              = "fligts"
                           headerText      = "Flight"
                           width           = "100"
                           headerVisible   = "true"
                           design          = "alternating"
                           visibleRowCount = "10"
                           fillUpEmptyRows = "true"
                           showNoMatchText = "true"
                           filter          = "server"
                           sort            = "server"
                           onHeaderClick   = "MyEventHeaderClick"
                           table           = "<%= APPLICATION->itab %>"
                           iterator        = "<%= ITERATOR %>" />
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    <b>Event Handling:</b>
    DATA: EVENT_ID1 TYPE REF TO IF_HTMLB_DATA.
    EVENT_ID1 = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
    CASE EVENT_ID1->EVENT_SERVER_NAME.
    IF NOT event_id1 IS INITIAL.
       if event_id1->server_event+0(9) = 'chkevent'.
      SPLIT event_id1->server_event AT '-' INTO v_event v_dummy v_row v_col.
      endif.
    endif.
    method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS.
         CLEAR p_column_definitions.
        CLEAR p_overwrites.
        DATA: tv_column  TYPE TABLEVIEWCONTROL.
        tv_column-COLUMNNAME  = 'FLDATE'.
        tv_column-edit        = 'X'.
        tv_column-sort        = 'X'.
        tv_column-TITLE               = 'Flight Date'.
        tv_column-WIDTH  = '100'.
        APPEND tv_column TO p_column_definitions.
        CLEAR tv_column.
        tv_column-edit        = 'X'.
        tv_column-COLUMNNAME          = 'CONNID'.
        tv_column-TITLE               = 'Conn.ID'.
        tv_column-WIDTH  = '70'.
        tv_column-HORIZONTALALIGNMENT = 'center'.
        APPEND tv_column TO p_column_definitions.
        CLEAR tv_column.
        tv_column-edit        = 'X'.
        tv_column-COLUMNNAME          = 'CHECKBOX1'.
        tv_column-TITLE               = 'Check Box'.
        tv_column-WIDTH  = '30'.
        tv_column-HORIZONTALALIGNMENT = 'center'.
        APPEND tv_column TO p_column_definitions.
    endmethod.
    METHOD IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
           DATA: L_EVENT TYPE STRING.
      CASE P_TABLEVIEW_ID.
        WHEN 'fligts'.
          CASE P_COLUMN_KEY.
            WHEN 'CHECKBOX1'.
    *          CONCATENATE 'chk_event' '123' '2323' INTO L_EVENT SEPARATED BY '-' .
    CONCATENATE 'chkevent' p_cell_id INTO l_event SEPARATED BY '-'.
              P_REPLACEMENT_BEE = CL_HTMLB_CHECKBOX=>FACTORY( ID = P_CELL_ID
            ONCLICK = L_EVENT CHECKED = 'false' ).
          ENDCASE.
      ENDCASE.
    ENDMETHOD.
    Hope this will solve your problem.
    <b><i>* Reward each helpful answer.</i></b>
    Raja T
    Message was edited by:
            Raja T

  • How do you get different check box fields to display based upon a list box selection?

    I am a relative newbie with LifeCycle Designer ES using v.8.2.1 to create interactive forms to replace manual hardcopies.  I am working on a form that has a few pull down list boxes.  I want different check box fields to display based upon the selection of an item from one of the pull down lists.
    Any guidance on the best way to accomplish this would be greatly appreciated.

    Hi,
    Here is a sample with script in the change event of the dropdown. You may want to clear previous checkbox choices once the subform is hidden.
    It is good to group objects in a subform - that way you only need to hide the subform and not each object in turn.
    Good luck,
    Niall

  • Linking/Grouping Text Fields with a Check Box Field

    Disclaimer: I know nothing about coding/scripting in Acrobat (or in any language, for that matter).
    I have 4 sets of text fields, call them A, B, C, and D. All of the fields in set A will have a value entered. There are 10 fields in set A while sets B, C, and D may have as many as 104. Sets B, C, and D will always have a one-to-one-to-one correspondence with each other (B1 is associated with C1 and D1 only and so on). My dilemma/desire is two fold:
    First:
    I want to be able to group 3 to 4 of the fields in set C if I tick a check box/radio button/whatever field type works. When the fields are grouped, I want their values to be the same within the grouping. These fields should also be ungrouped when the marker field is unchecked/deactivated. No field will ever be in any more than one group.
    Second:
    I want values for set B to equal a value of set A if there is a value entered in that B's corresponding C field.
    Please don't hesitate to point out where I can make any of this clearer.
    Thank you in advance,
    Joseph
    P.S.
    If one or both of these is not doable in Acrobat, would you please kindly point me to a program that can do this?

    Steve,
    Sorry, I referenced InDesign and this file was created in Illustrator. (I have been working with numerous files created in both InDesign and Illustrator, with numerous challenges). I do not have the native document nor Illustrator software, only Acrobat. When I previously loaded the InDesign-created pdf file(s) into Acrobat, I was unable to use the Text TouchUp Tool because I do not have the fonts on my system that were used to create the documents in InDesign, thus I am denied access to the text. With this file, created in Ilustrator; I assume because the text resides within the image created that encompasses the entire page, the Text TounchUp Tool and Object Tool have no response when I click on the page after activating the tools with a click, although the Tool Bar allows me to click on the icons to activate the functions.
    I have read elsewhere that InDesign and Illustrator files are exported as images, thus requiring either Photoshop or Illustrator to fully edit outside of the originating software. However, I was hoping that I could create interactive forms by overlaying fields with Live Cycle Designer - I did not anticipate the default setting of the check box labels being unchangeable. Sounds like I am at a dead-end with this issue??
    Linda

  • Adding a New Check Box field in Business Partner

    Experts,
    I know there are hundreds of thread on this topic. But i'm not clear with that.
    I have to add a new Check box in the Business Partner Screen. We are on SRM 5.0.
    The check box should be placed in "Business Partner Status" Frame of "Company Data" Tab.
    How to go about this, Kindly please expalin the steps.
    More over the Check box will be used for further processing in other tabs.
    Pl throw some light on that aspect also.
    Rgds
    Immediate Rewards for Sure
    SV

    Hi
    Try this link, already copied by ..
    Re: vendor master extensions by customer
    It is not possible to display F4 help for customer fields in BBPMAININT Transaction.
    Supporting link ->
    F4 for customer table fields
    Other useful links ->
    Note 675800 - Business partner enhancement SRM on maintenance screen
    Re: How I can save customer fields in Vendor master?
    Re: Adding new fields in VEndor master data in EBP
    Hope this will help.
    Regards
    - Atul

  • Formatted search on a 'check box' field

    Hi,
    I want to set the 'allow partial delivery' to an 'N' automatically. It comes up as checked when a new BP is created and I have not found anything in the setup that will change this. When I try to select this field to assign an FMS to it, it won't let me. Any suggestions?
    Thanks

    Art,
    You could not assign a FMS to a check box.  I would suggest that you create a template BP Account and make the settings you need and everytime you create a new BP use the template BP Account and Click DATA > Duplicate and this way you need not change the settings each time.
    Suda

  • How to have the check box fields in the table ...Please help me out.

    Hi
    can any one give me code save the checkbox field to save in the table.
    I have displayed the checkboxes using the loops from the table but when i am clicking the checkboxes and pressing the button save its not saving in the database table.
    please help me out. Its urgent .
    Thank you very much suneetha

    DOnt duplicate the thread...Reply to the below thread..
    Re: In the loop to display checkboxes.
    Raja T

  • Need to change the LOV field based on checked box selection in OAF page

    Dear ALL,
    I have a requirement as below:
    I have a custom OAF page having a lov  field which is mandatory, a check box and a two text fields.
    So based on LOV value selection i am defaulting two text field value automatically.
    So my requirement is when user selects the check box automatically the LOV field should be non mandatory and user can insert in values to the lov field and text field and submit it.
    SO basically based on check box field selection i need to make the lov field in such a way it should accept all the values what user enters instead of check the query added in VO behind the LOV.
    Please suggest me some pointers to achieve this requirement.
    Thanks
    Deb

    hi,
    in PFR use:
    if ("checkevent".equals(pageContext.getParameter(EVENT_PARAM))) 
                     HashMap hashMap = new HashMap();
                     String checkboxval=pageContext.getParameter("item2");
                  hashMap.put("checkboxval",checkboxval);
                    pageContext.setForwardURLToCurrentPage(hashMap ,
                    true, // retain the AM
                    OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
                    OAWebBeanConstants.IGNORE_MESSAGES);
    and in PR use:
    if((pageContext.getParameter("checkboxval'))!=null)
    OAMessageLovInputBean lovInputBean=(OAMessageLovInputBean)webBean.findIndexedChildRecursive("item3");
          lovInputBean.setRequired("false");
    try it
    Regards
    Mahesh

  • Want check box checked as default for a newly added subscreen in ME21N

    Hi Guys,
                 I have added a subscreen in ME21N with one field with check box.
    When I enter ME21N I should get that checkbox CHECKED automatically.
    How to do this.
    And one more thing is when manually putting checkmark,when I press enter that check mark is getting deselected.How to overcome this???
    I have used screen exit
                                      SAPLXM06 
                                      screen: 0101   for this subscreen.
    Thanks in Advance.
    Prasad.

    Hi,
    the deselection problem could be caused of an incorrect name of that screen field name. You should check in screen painter if that check box field name is the same name as your data object (e.g. gv_checkbox) .
    Unfortunately it is not possible to define default values within Screen Painter. You have to do this in PBO.
    Regards
    Mark-André

  • Check boxes in ALV Report how to do ?

    ALV report how to keep check box  in the first field?
    thanks in advance..
    chalapathi

    hi,
        Check this small code..  U will get clear idea.
    Report.
    data : begin of it occurs 0,
            MATNR TYPE MATNR,
            c1 ,                  " CHECK BOX FIELDS
            c2,
            end of it.
    type-pools : slis.
    data itlog type slis_t_fieldcat_alv.
    data walog type slis_fieldcat_alv.
    SELECT MATNR
    FROM MARA
    INTO TABLE IT .
    ****INSERTING  CHECKBOX  IN CHANGE MODE
    WALOG-FIELDNAME = 'C1'.
    WALOG-TABNAME = 'IT'.
    WALOG-SELTEXT_M = 'CHECKBOX1'.
    walog-CHECKBOX = 'X'.
    WALOG-EDIT = 'X'.
    APPEND WALOG TO ITLOG.
    ****INSERTING  CHECKBOX  IN DISPLAY MODE
    WALOG-FIELDNAME = 'C2'.
    WALOG-TABNAME = 'IT'.
    WALOG-SELTEXT_M = 'CHECKBOX2'.
    walog-CHECKBOX = 'X'.
    WALOG-EDIT = ''.
    APPEND WALOG TO ITLOG.
    WALOG-FIELDNAME = 'MATNR'.
    WALOG-TABNAME = 'IT'.
    WALOG-SELTEXT_M = 'MATERIAL'.
    walog-CHECKBOX = ''.
    WALOG-EDIT = 'X'.
    WALOG-NO_ZERO = 'X'.              " LEFT ZEROS WILL CUT
    APPEND WALOG TO ITLOG.
    *WALOG-FIELDNAME = 'ICON'.
    *WALOG-TABNAME = 'IT'.
    *WALOG-SELTEXT_M = 'ICON'.               "IN FIELDCATALOG ADDING THAT ICON
    *walog-ICON = 'X'.
    *walog-just = 'R'.                   " RIGHT JUSTIFICATION OR LEFT
    **WALOG-EDIT = ''.
    *APPEND WALOG TO ITLOG.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
       I_CALLBACK_PROGRAM                = 'ZALV_SIMPLE1'
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
       IT_FIELDCAT                       =   ITLOG
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        T_OUTTAB                          =  IT
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    Thanks and Regards,
    surya

  • How to print check box in ALV list display and how to pick selected ones

    Hi
    i am displaying one ALV list dispaly. for that im adding one check box fields by filling the fieldcat as below:
      wa_fldcat-checkbox = 'X'.
      wa_fldcat-edit = 'X'.
    but the check box is showing disable mode only. i want to display that check box and if i select that check box i want pick that records. for ALV grid i found one FM to pick records of selectedones as below.
    DATA ref_grid TYPE REF TO cl_gui_alv_grid.
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF ref_grid IS NOT INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
    but how can i do for list display to pick those selected one records.
    Can any one sugget regarding this.
    Thanks in advance.
    Rahul.

    Hi,
    Thanks. now it's enabled. but how can we pick the records from that list whichever i selected through that check box.
    i found this one for ALV grid:
    DATA ref_grid TYPE REF TO cl_gui_alv_grid.
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF ref_grid IS NOT INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
    but how for ALV normal list display.
    Thanks.
    rahul

  • Help requested: How to pass the (check box) selected rows data to other scr

    Hi friends, Here is a situation where I have to pick only those records data which i select by checking the check boxes and carry on to next screen where I have to display them and do some processing on such selected rows of data. Can any one suggest me how to code this. Thanks in advance.

    Hi Subbarao,
    One way is to check if the field is selected by checking if the field value = 'X'.
    If it is a table control we will have to loop and find out which all records are selected..it is notable that the check box field will mostly be of single character and contain 'X' if it is checked and space if not checked
    Based on the structure where the check box is held we may have to implement various logic to retrieve whether the field is checked or not....for instance we can move data to another internal table for which the checkbox is checked and can retrieve it from the next screen
    Pls check,revert and reward if helpful
    Regards
    Byju

  • Import Word 2007 Form check boxes undefined

    Any one have any idea on how to get the forms wizard to import the field property names for check boxes in an Adobe form?
    I have a Word 2007 form which I have tried saving as a .doc, .dot, dotm, .docx and no matter what format I choose, I cannot get the check box fields to import.  I used the legacy checkbox field under the developer ribbon in Word 2007 to create the check boxes.   I have tried to import with protection on the word form enabled and stopped but it doesn't make a difference. The check box fields come across fine but the name and the text fields both say undefined rather then display the field name given in Word.  I am using Adobe 9 pro.  I have checked my Adobe preferences in Word and made sure all the boxes were checked for converting bookmarks but it still did not make a difference.  The text fields are importing fine with the property field names.
    Here is an example:
    I have a yes check box that is labeled StorageY and a no checkbox labeled StorageN for the properties in Word.  I then went to the form wizard in Adobe 9 and selected start with existing form and selected the fillable word form I created with the check boxes.  I imported it and the check box properties say Undefined for both storageY and storageN.   There are about 60 check boxes in the document and I don't want to retype them every time in Adobe when the word form is updated and has to be conveted again.
    I sure hope there is a solution.
    Thanks.

    Thanks for the information but I respectfully disagree with "there is no import".  If you open Adobe Acrobat
    9 pro and go to Forms, Start Forms Wizard, select An Existing electronic document and click on Next. Select "import" a file from file system and browse for the word document and click on Next.
    Using this method not only runs the automatic field recognition you were referring to, it also brings in all the word form field text and formats with the exception of the check boxes.  My only guess is the problem has something to do specifically with the check box fields as it does bring over the radio button text.  A lot less work to keep the form updated.  It rocks.  You should try it some time.
    Word 2007 pdf writer does the same thing as the openoffice.org but neither bring across the form field info.  They just create a starting point and you would have to use the method you described above to create the fillable form.

  • Vendor Master Upload Problem with Check Box

    Hi All,
    I have a problem with Vendor Master Upload program. In one of the screen of XK01 transaction depending upon the PO Box, Postal Code, Other City and Other Region i have to check the PO Box w/o no check Box. So in my program after i check the PO Box, Postal Code, Other City and Other Region values how to write a code that i can check the PO Box w/o no. Or other wise how can i send value to the Po Box w/o no check box. field
    Thanks in advance.

    The call to the first screen should look something like:
        perform dynpro
          tables bdcdata
          using:
         'X' 'SAPMF02K'     '0105',         "Create Vendor: Initial Screen
          ' ' 'RF02K-BUKRS'             'COCO',
          ' ' 'RF02K-KTOKK'             'YYYY',
          ' ' 'USE_ZAV'                 'X'.
    I'm using screen 105, not 100 here.
    Rob

  • How to disable and enable Check box based upon condition

    Hi,
    I wants to disable/hide the check box field before the required field is filled.   Kindly help me

    Hi Mohammed,
    Try to use customize InfoPath form, add rules. Go to list tab, click customize Form, then this opens the list form in InfoPath
    format.
    1.Select the check box field control, click add rules, select if is blank, show validation error action.
    2.Then go to conditions, click column name is blank, change it to the required column you want.
    3.Go to rule type, click validation, change it to formatting, select hide this control.
    4.Publish the InfoPath form.
    Best Regards.
    Kelly Chen
    TechNet Community Support

Maybe you are looking for