Check DB13 and DB59

Hello All,
One of job failed with following job log.
Can somebody pl. let me know which inconsistency it is suggesting.
Job started
Step 001 started (program RSDBAJOB, variant &00000000000062, user id BASIS
Inconsistent system integration
Check DB13 and DB59
ABAP / 4 processor : MESSAGE_TYPE_X
Job cancelled
Regards,
sap_basis007

Hello,
As far as I know,
RSDBAJOB job start from DB13 planing calender.
I afraid that i have posted message in the wrong place.
My guess is that, It should not be MAXDB specific.
Regards,
sap_basis007

Similar Messages

Error while checking in and storing

Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandra

Dear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

One report to check WBS and Asset number

Hi All,
Please advice. Is there any report to check WBS and asset number belong to ?
Many thanks in advance.
Nies

Please let me know your exact requirement.
But KOSRLIST_PR will show (if you have valid entries) the settlement receiver something like below with WBS element information and settlement details:
WBS ISC/00002-1-02 RECEIVER WBS2-COMP 1000
FXA 1000/700000132/0 RECEIVER WBS2-COMP 1000 100.00 AUC Act
Regards
Sreenivas

Best report to check application and package deployment compliancy?

I am looking for the best report to check application and package deployment compliancy.
Preferably targeting a collection.
tconners

I'm recommending this one:
Software Distribution - Application Monitoring folder -
All application deployments (advanced)
It allows you to select Collections and applications
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

I have a box that will not go away, it says, "To open JavaApplication, you need to install a Java SE 6 runtime. Would you like to check for and install one? If i push not now, it keeps popping up, if I push install, it says it's not available, help.

I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion. the box says, "To open JavaApplication, you need to install a Java 6 SE runtime. Would you like to check for and install one? (smaller print) Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading. A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
Finally there are two boxes to click. One says not now. If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away. If I click on the second box, Install, it says The software is currently unavailable. To install a Java SE 6 runtime later, open Java Application again.
My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help. My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can. Help.

Does this happen immediately after you log in? If so, one of your login items is probably causing it.

Check price and availability shows no data

Dear Experts,
In the Check price and availability app, im trying to check the availability of a material on a particular date.
Issue 1:
The available stock quantity for material 953 is 260. There is no availability check maintained in material master(KP- no check)
Say for eg, 29th may and quantity as 10 items for material 953, the app displays data as below. How is the estimated delivery date calculated as i ahve not maintained any planned delivery date in MMR.
But when i check for this material 953 or 954 or 2390 or any other material for date 27th may or 29th may, it says stock is not available though the
physical stock is listed for 260 pcs as below.
Issue 2:
The available stock of material 953 is only 260. when I check for 1000 quantities on 30th May, the system must say, stock is not available
But however the app displays stock is available with the estimated delivery date. Im unable to find the cause of this output.
Please guide me how to sort the issue.
Please help as this issue is urgent.
Thanks & Regards
Dhinesh
Message was edited by: Michael Appleby

Hi Dhinesh
I am Also facing this problem from long back. And we updated all the Patch level but i didnt get the solution.
Please Share the Info if you find the Solution for this issue.
Regards
Prasanth SV

I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same.

I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.

try restarting
both ipad http://support.apple.com/kb/ht1430
and atv
restarting ios devices cure 80% of all troubles users have

I have two numbers listed in my messages tab under settings. One number is checked(mine) and the other is not(my sons). However when someone sends me a text it goes to both mine and my sons iphones. How do i delete his number from my phone.

I have two numbers listed in my messages tab under settings. One number is checked(mine) and other is not(my sons). However when someone sends me a test it goes to both numbers. Mine and my sons. How do I delete his number so that he no longer received texts intended for me.

The best way is to not share Apple IDs but also make sure under Settings & Messages on both devices that only one phone number is checked.

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

Can I get my Macbook Pro just checked out and tuned up at the genius bar?

I'm having a hard time getting my questions answered. Basically I've had my Macbook Pro for four and a half years, but it's still doing mostly fine. It's just showing it's age slightly I think, with more spinning wheels than usual and odd things like the date is usually set to 1999 when I turn the computer on, but it rights itself in a few minutes. Also most the time when I plug it in it says it's not charging and I have to try multiple times. None of this is a huge deal, it's just that I really need the computer to last me preferably at least another year, so I worry about it a bit. I do take good care of it though. I'm about to move out of the country for a year, so I'd like to get it just checked out and perhaps tuned up a bit so that any problems are taken care of and it's in the best shape before I move away. I'd like to make a genius bar appointment, but the closest Apple store is a two hour drive from my home, so I don't want to go into it not having any idea how much it will cost or if they'll even be able to do what I'm hoping in the span of a single workday. I really don't want to have to drive back later to pick it up or have it sent off somewhere to be repaired, although if it does have serious problems I'd be willing to do that. I'd just like to know going in to it what the price range is likely to be like. I don't want to make the drive to the Apple store and have them tell me it's going to be a few hundred dollars just to have my computer looked over. And I don't even know if they offer that service, let alone if they can do it in a single afternoon. I've tried calling the store and conversations with the automated person really are not helpful. He just tells me to go online and make a reservation, and I can't figure out how to get my questions about cost and service answered.
Also, am I being foolish hoping my four and a half year old Macbook will last at least another year or two? I have no idea what the "life expectancy" is for these things. I know nothing really about computers at all, so forgive my ignorance.
Any help and insight is very much appreciated.

The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

EWS API - Impersonating to update a calendar item created by any other user than a service account, raise an error "Access is denied. Check credentials and try again."

Hi,
I am new to using EWS managed APIs.
Following is the issue:
1. I am using a service account e.g. [email protected]. This user is a global administrator and also has ApplicationImpersonation role assigned. (Sign into Online Office 365 account -> Admin -> select "Exchange" tab- > select Permissions
on the left panel -> create an impersonation role -> assign ApplicationImpersonation in Roles: and [email protected] in Members: -> Click on save)
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected].
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
        private static void Impersonate(string organizer)
            string impersonatedUserSMTPAddress = organizer;
            ImpersonatedUserId impersonatedUserId =
                new ImpersonatedUserId(ConnectingIdType.SmtpAddress, impersonatedUserSMTPAddress);
            service.ImpersonatedUserId = impersonatedUserId;
4. It was working fine till yesterday afternoon. Suddenly, it started throwing an exception "Access is denied. Check credentials and try again." Whenever I try to
update that event.
       private static void FindAndUpdate(ExchangeService service)
            CalendarView cv = new CalendarView(DateTime.Now, DateTime.Now.AddDays(30));
            cv.MaxItemsReturned = 25;
            try
                FindItemsResults<Item> masterResults = service.FindItems(WellKnownFolderName.Calendar, cv);
                foreach (Appointment item in masterResults.Items)
                    if (item is Appointment)
                        Appointment masterItem = item as Appointment;
                        if (!masterRecurEventIDs.Contains(masterItem.ICalUid.ToString()))
                            masterItem.Load();
                            if (!masterItem.Subject.Contains(" (Updated content)"))
                                //impersonate organizer to update and save for further use
                                Impersonate(masterItem.Organizer.Address.ToString());
                                // Update the subject and body
                                masterItem.Subject = masterItem.Subject + " (Updated content)";
                                string currentBodyType = masterItem.Body.BodyType.ToString();
                                masterItem.Body = masterItem.Body.Text + "\nUpdated Body Info:
xxxxxxxxxxxx";
                                // This results in an UpdateItem operation call to EWS.
                                masterItem.Update(ConflictResolutionMode.AutoResolve);
                                // Send updated notification to organizer of an appointment
                                CreateAndSendEmail(masterItem.Organizer.Address.ToString(), masterItem.Subject);
                                masterRecurEventIDs.Add(masterItem.ICalUid.ToString());
                            else
                                Console.WriteLine("Event is already updated. No need to update again.:\r\n");
                                Console.WriteLine("Subject: " + masterItem.Subject);
                                Console.WriteLine("Description: " + masterItem.Body.Text);
            catch (Exception ex)
                Console.WriteLine("Error: " + ex.Message);
5. What could be an issue here? Initially I thought may be its a throttling policy which is stopping same user after making certain API call limits for the day, but I am still seeing this issue today.
Any help is appreciated.
Thanks

Your logic doesn't sound correct here eg
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected]
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
When your connecting to [email protected] mailbox the only user that can make changes to items within
abccalendar is abc (or ABC's delegates). If your impersonating the Organizer of the appointment pqr that wouldn't work unless the organizer had rights to abc's calendar. If you want to make updates to a calendar
appointment like that you should connect to the Organizers mailbox first update the original, send updates and then accept the updates.
When you impersonate your impersonating the security context of the Mailbox your impersonating so its the same a logging on as that user in OWA or Outlook.
Cheers
Glen

Lost all my built in apps on my Iphone3GS, i have checked restrictions and spotlight search and i do not have phone,imessage,or appstore apps anymore,please help me!

Lost my phone,imessage,and app store apps and when i try to restore it,its still showing up like this,i have checked restrictions and spotlight search but still no luck,please help!

Settings > General > Reset > Reset Home Screen Layout

On my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad

on my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
thatnks

Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

How to hide check-in, check-out and publish buttons

hi,
i am new here and hope someone can help me:
users of a community can edit some content items. they can open these items with this link (from administrators guide for al interaction publisher 6.5 p. 10-28):
</pcs:value>/published_tools/content_item.jsp?&view=submit&ciid=<pcs:value expr="pcs_id"></pcs:value>" target="_blank"></a>
the link works, users can edit the items.
problem is, that i do not want to show the "publish button" to the users. the content item should be published automaticaly after the user clicks on "save". i also do not want users to see the check-in, check-out and preview buttons. they should just open a content item (+ simultaneously check-out), edit it and save it (+ simultaneously check-in and publish and close the content editor).
i thought this can be done by the "view" parameter, but nothing happens if i use it. any ideas?
thx
volker
Edited by: vhspec on 03.06.2009 00:58

Hi vhspec,
This is a common problem. A creative way to solve the problem is to point yourself to the description field of each input on a data entry template. When you have the need to make any dynamic changes to the entry templates simply drop some javascript into the description field of an input and write the appropriate javascript code to either hide buttons, change behaviour etc. When the data entry template is displayed to a user the javascript in the description field will be executed by the browsing. Fortunately publisher does not check the description fields or encode them so you can get away with a lot.
The only problem with this approach is while you are altering the UI the underlying data model will still allow users to publish. So if an unauthorised user saw fit, they could publish content.
Have you considered creating a workflow so that users in specific groups cannot publish? that way only a controller down the line would be able to approve and publish.
Edited by: user8023716 on Jun 9, 2009 2:55 AM

Check DB13 and DB59

Similar Messages

Maybe you are looking for