Check the status expdp datapump job

All,
I have started expdp (datapump) on size of 250GB schema.I want to know when the job will be completed.
I tried to find from views dba_datapump_sessions and v$session_longops,v$session.But but all in vain.
Is it possible to find completion time of expdp job?
Your help is really appreciated.

Hi,
Have you started the Job in "Interactie mode".. ??
If yes then you can get the status of Exectuion with "STATUS"- defauly is zero (If you setting to not null value then based on that it will show the status - seconds)
Second, thing check "dba_datapump_jobs"
- Pavan Kumar N

Similar Messages

How to check the status of a job!!!

Hi,
i want to check the status of a job and also send a mail when a job is cancelled.
Is there any function module which does that , also i want check the jobs across various time periods and not of today....
Its urgent,
Answers will be rewarded,
Regards,
Rohan

Hi Rohan,
You can get job information by <b>calling function "BP_JOB_READ".</b> If you pass the value btc_read_jobhead_only defined in LBTCHDEF, it will only return the
job header info into the export parameter JOB_READ_JOBHEAD. The job status
is set in JOB_READ_JOBHEAD-STATUS.
Alternatively, <b>you can just lookup table TBTCO</b>, the status is in
TBTCO-STATUS.
The values in STATUS are defined in LBTCHDEF as follows;
DATA:
BTC_RUNNING LIKE TBTCO-STATUS VALUE 'R',
BTC_READY LIKE TBTCO-STATUS VALUE 'Y',
BTC_SCHEDULED LIKE TBTCO-STATUS VALUE 'P',
BTC_RELEASED LIKE TBTCO-STATUS VALUE 'S',
BTC_ABORTED LIKE TBTCO-STATUS VALUE 'A',
BTC_FINISHED LIKE TBTCO-STATUS VALUE 'F',
BTC_PUT_ACTIVE LIKE TBTCO-STATUS VALUE 'Z',
BTC_UNKNOWN_STATE LIKE TBTCO-STATUS VALUE 'X'.
Thanks,
Vinay

Reg: Function Module thats used to check the status of JOBS and mail it

Hi Experts,
Is there any Standard Function module thats going to find the status of the jobs and mail this status to specied email ID in .xls format. While checking status function module should give whether job is - Aborted, Successful, Running, Waiting, Locked, Error, Warning, Starting Date, Ending Date of the Job.
Please help me,

Hello Nagaraj,
You can find out the status of a job with the SHOW_JOBSTATE function module. You provide this function module with a job name and job number. It returns one of the six possible statuses of the job:
ABORTED TYPE C,
FINISHED TYPE C,
PRELIMINARY TYPE C,
READY TYPE C,
RUNNING TYPE C,
SCHEDULED TYPE C.
Following is the link for the same:
http://help.sap.com/saphelp_sm32/helpdata/en/fa/096e10543b11d1898e0000e8322d00/content.htm
Warm Regards,
Riki Dash

To check the status of a step inside a background jobs

Hi All,
i have a requirement where i have to check the status of a step(program)
inside a background job.
I tried with table TBTCP, but this will give the program status as P(scheduled)
always.
i know to find the status of a background job as whole, but how will we
find out the status of a program inside a job.
Could anyone please help?

Use function module BP_JOBLOG_READ, result is an internal table of structure TBTC5,
Analyze this internal table, looking for message S550(00) at the beginning of a step.
Regards

Error while checking the status of Oracle Cluster ware

Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1            STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS M

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Checking the status of task records tied to the custom object 3

We are using custom object 3
There has been lot of configuration work done on this object.
There is a checkbox on the UI. When a user will checks off the check box, a task record(s) is created depending on the condition.
Is there a way for me to check the status on the task records and then set a field on the parent record i.e. custom object 3.
Thanks,
Nitika

To whom are you speaking?

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

Checking the status of the insert query in JSP

frendz,
i am working with JSP .i have some content to be inserted in the database.i have used the insert query in SQL for that.i am able to check whether it has been inserted properly in the SQL but i want to check the status of the insert query with its return value(so that i can confirm it does not return a error).so please help.

The Statement#executeUpdate() returns an int with the row count. Get hold of it.
Also see the Statement API: http://java.sun.com/javase/6/docs/api/java/sql/Statement.html
Apart from this, I recommend you to use PreparedStatement instead. It will not only ease setting Java objects in a query (no hassle anymore with quotes), but it will also prevent you from SQL injections.
Prepare here: http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
SQL injections: http://en.wikipedia.org/wiki/SQL_injection

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My Order Number 2510885387 and i have ordered for developer account but when i am checking the status it is still saying no order done in last 30 days

my Order Number 2510885387 and i have ordered for developer account but when i am checking the status it is still saying no order done in last 30 days

There's a Contact Us button at the bottom of this article > https://developer.apple.com/support/ios/purchase-and-activation.php

How to check the status of file downloading?

I have to download the selected file by using "file download" dialogue box.
This "File Download" dialogue box provides options for "Open", "Save", "Cancel" or "More Info". It is similar to usual "File Downloading".
And i am required to do further processing only if , file is "Open" or "Save".
So how can i check the status of the option selected by the user?
Following is the code snippet:
res.setContentType("text/plain");
res.addHeader("Content-Disposition", "attachment; filename=" +value);
try
     uFile= new File(fPath);
     fSize=(int)uFile.length();
     fis = new FileInputStream(uFile);
     c=-1;
     while ((c = fis.read()) != -1)
          out.print((char)c);
     fis.close();
     out.flush();
     out=null;
catch(Exception e)
       out.println("Exception : " +e);
} I tried to generate a flag and inside a while loop, and then checking the status of that flag outside of loop.
But it doesn't work.
It reflects the value of flag even if user selects "Cancel" Option.
So, if there is any another way of checking the option selected by user from "Open","Save" or" Cancel", then please reply me.
Thanks in advance.

Is there any solution for this or any web link for this...?
Thanks in advance,
Waiting for reply

How to check the status of an IDoc in the Target system

Hi Experts,
we are using a self-made program to send Material and BOMs from Client A to Client B into the same ERP System.
How can I check the status of an IDoc in the Target Client B (like BD87 - ALE Monitor) ?
If you have some examples or Function, please give me the information.
Rewards if helpful.
Regards,
David

Hi David
As mentioned in the earlier reply you can check your status with tcodes:-BD87,WE02,WE05.What i guess from your querry is the staus of your idoc whether posted or not in target client B.Check in the target client for the message type which you are using (since its an program that means you must be using an customised idoc type or standard) .You might have maintained Basic type tcode:-WE30.Give in your messagetype,Basictype,Created at and executed using tcode :- BD87.The prerequisites are you need to create an Partner Profile(WE20) .For this you need to create to provide in your message type and Process code(we41,we42,we57).If you have to create an process code for customised one(se37) .You need to actuivate the idoc inbound processing .If you are using a file in your file make it sure the port is being maintained for the same to chek for unicode format in tcode :-WE21 (check or uncheck).
For standard BOM i recon you are using message type :-BOMMAT and Processing code as:-BOMM.Its always advisible that instead of using an whole abap program you need to have an ETL tool that would take care of the extraction of data provided your client do have existing Legacy system in its place since it would be much faster and easier.
Regards
Somnath

What happens during an iphone 5 processing order, i ordred mine 1 week ago and when i check the status it says processing order

What happens during an iphone 5 processing order, i ordred mine 1 week ago and when i check the status it says processing order

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

What is the tracking ID for checking the status of a sent text message??

i don't know what the tracking ID is for checking the status of a sent text message...

You didn't need to post here and start a new thread; you could have just done a search, i.e.,
https://community.verizonwireless.com/thread/455106

Check the status expdp datapump job

Similar Messages

Maybe you are looking for