Checkbox ,at selection screen output

i hav 2 checkboxes.at selectionscreen if i click on one of them, the other should get deactive and viceversa..pls let me know the code...points will be awarded..

Hi Kiran,
Try this. Hope it could give you some idea.
SELECTION-SCREEN BEGIN OF BLOCK BOX1.
PARAMETER: p_all AS CHECKBOX ,
           p_chk1 AS CHECKBOX USER-COMMAND ABCD DEFAULT 'X'
           p_chk2 AS CHECKBOX MODIF ID XYZ.
SELECTION-SCREEN END OF BLOCK BOX1.
AT SELECTION-SCREEN OUTPUT.
IF p_chk1 = 'X'.
    LOOP AT SCREEN.
      CHECK SCREEN-GROUP1 = 'XYZ'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDLOOP.
    CLEAR: p_rep2.
ELSE.
    LOOP AT SCREEN.
      CHECK SCREEN-GROUP1 = 'XYZ'.
      screen-input = '1'.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.

Similar Messages

Help Needed in At selection screen output

Hi Experts,
I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
Thanks in advance for all your help.

example from a checkbox in one of my progs..but you can do same approach with radio butts
parameters p_test as checkbox default abap_on user-command test.
at selection-screen.
    if sy-ucomm = 'TEST'.
      perform birth_mnth_chck.
    endif.

AT SELECTION-SCREEN OUTPUT not working!

Hi,
I am useing the statement AT SELECTION-SCREEN OUTPUT to disable some input fields based on a check box(PR_FILE).however when I execute the program the changes on the screen are not reflected!I have written the AT SELECTION-SCREEN OUTPUT stmt immediately after SELECTION-SCREEN stmt .
Defination for the screen elements is as follows:
SELECT-OPTIONS s_plants FOR ls_selected_plant-plant
                                                     NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK filesel WITH FRAME TITLE text-012.
PARAMETERS pr_file TYPE xfeld .
PARAMETER : pr_path LIKE rlgrap-filename .
SELECTION-SCREEN END OF BLOCK filesel.
AT SELECTION-SCREEN OUTPUT.
IF pr_file = 'X'.
    LOOP AT SCREEN.
      IF screen-name = 's_plants'.
        screen-input    = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-name = 'pr_path'.
        screen-input    = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
Can anybody suggest what wrong i have done??

You need to use the User Command for the checkbox and the Modificaiton ID (Group) for the fields.
Try like this:
TABLES: VBRP.
SELECT-OPTIONS S_PLANTS FOR VBRP-WERKS NO INTERVALS MODIF ID GP1.
SELECTION-SCREEN BEGIN OF BLOCK FILESEL WITH FRAME TITLE TEXT-012.
PARAMETERS PR_FILE TYPE XFELD USER-COMMAND USR1.
PARAMETER : PR_PATH LIKE RLGRAP-FILENAME MODIF ID GP2 .
SELECTION-SCREEN END OF BLOCK FILESEL.
AT SELECTION-SCREEN OUTPUT.
    IF PR_FILE = 'X'.
      LOOP AT SCREEN.
        if screen-group1 = 'GP1'.
          SCREEN-active = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ELSE.
      LOOP AT SCREEN.
        IF SCREEN-group1 = 'GP2'.
          SCREEN-active = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
Regards,
Naimesh Patel

At selection- screen output issue

Hi,
I have a issue regarding at selection-screen output event with radio buttons,
Fields are like,
Block B1
RB1
Block B2
RB2
 field 1 (Check box)
 field 2 (Check box)
User can select one radio button at a time. If the user clicks on radio button RB1 then fields under Block B2 will be disabled. If user click on RB2 field 1 and fields 2 will be input enabled. Could you please give the solution asap
Note: Radio buttons are in different selection screen blocks.

Check this code -
*SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
*PARAMETERS:
*Pi1 TYPE C RADIOBUTTON GROUP G1 DEFAULT 'X',
*Pi2 TYPE CHAR25,
*Pi3 TYPE C RADIOBUTTON GROUP G1,
*Pi4 TYPE CHAR25.
*SELECTION-SCREEN END OF BLOCK B.
*PARAMETERS check AS CHECKBOX.
*PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
*PARAMETERS: ip1(10) TYPE c,
 ip2(10) TYPE c,
 ip3(10) TYPE c.
*SELECTION-SCREEN END OF BLOCK b1.
*SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
*PARAMETERS: ip4(10) TYPE c MODIF ID bl2,
 ip5(10) TYPE c MODIF ID bl2,
 ip6(10) TYPE c MODIF ID bl2.
*SELECTION-SCREEN END OF BLOCK b2.
*AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
Regards,
Amit Khare
reward all helpful replies.

At selection-screen output probelm

Hi ,
I am using 4 parameters in the selection screen . I am entering data in the 3 input fields. Then I am doing concatenate 3 fileds data into the 4 th field in the event AT SELECTION-SCREEN OUTPUT, bur my problem is When ever i click ENTER , then only 4th field is updating. With out ENTER key , Is it possible update 4th filed.
regards,
ramajay reddy

Hi,
This is not possible without a user action on the screen, unless your fields are drop down lists, check box or radiobutton respectively, Reason is that the SAP Screen processing will not trigger the PAI event unless there is a user action on the screen like pushing a button, radiobutton , checkbox or selecting a value from a dropdown list. And hence PBO will not get triggered either. Thus entering value in input fields and pressing the tab key is not enough. The user must press 'Enter' if the PAI--PBO should be triggered.
Pressing 'Enter' is much more user friendly and convinient than adding a button/radiobutton/checkbox on the selection screen to update other fields on the selection screen as in your scenario.
regards,
Advait

At selection screen output not responding

Hi ppl,
I've 4 selection options in my screen. however I just need user to insert only 1 of the 4 for searching. Therefore i included 4 radio buttons. when user select rbf, sfileno will activer and other 3 will be grayed out, when user select rbi, sidnum will active and other will not be active and so forth. You can see the codes below.
However, during the program running, I found out when i select rbf, the other select options fields - sfileno, sidnum n scompsno are not inactive/grayed. It is the same when I seledt the other radio button. I just seem that i receive no response from the program. What have i done wrong here. please help. TQ
SELECTION-SCREEN BEGIN OF BLOCK frm1 WITH FRAME TITLE text-t01 .
SELECT-OPTIONS : sfileno FOR zlic_masterdb-nofailpermohonan modif id f01
 sidnum FOR zcustomer-idnumber modif id i01,
 sconame FOR zcustomer-contactname modif id n01,
 scompsno FOR zcom_compdhdr-compsno modif id c01.
PARAMETERS: rbf RADIOBUTTON GROUP g1 ,
rbi RADIOBUTTON GROUP g1,
rbn RADIOBUTTON GROUP g1,
rbc RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK frm1.
INITIALIZATION.
sfileno = '00001'.
 AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'f01' OR
SCREEN-GROUP1 = 'i01' OR
SCREEN-GROUP1 = 'n01' OR
SCREEN-GROUP1 = 'c01'.
IF rbf = 'X'.
IF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ELSEIF rbi = 'X'.
IF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ELSEIF rbn = 'X'.
IF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ELSEIF rbc = 'X'.
IF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
continue.
ENDLOOP.

hi Enzo
Check my sample code
TABLES: eban,
 SSCRFIELDS.
SELECTION-SCREEN BEGIN OF SCREEN 100 TITLE title.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER:rad1 RADIOBUTTON GROUP rad USER-COMMAND frad1 DEFAULT 'X',
 rad2 RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETER: mtr AS CHECKBOX MODIF ID g3 USER-COMMAND chk1,
 p_matnr TYPE eban-matnr MODIF ID g1,
 sloc AS CHECKBOX MODIF ID g3 USER-COMMAND chk2,
 str_loc TYPE eban-lgort MODIF ID g4.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: matnr1 FOR eban-matnr MODIF ID g2.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN PUSHBUTTON /20(10) name USER-COMMAND UCOM.
SELECTION-SCREEN END OF SCREEN 100.
name = 'FETCH'.
title = 'Test Report'.
CALL SELECTION-SCREEN '100'.
TYPE-POOLS slis.
* declaration of internal tables and work areas to be used
DATA: BEGIN OF it_pr OCCURS 0,
 banfn TYPE eban-banfn,
 bnfpo TYPE eban-bnfpo,
 loekz TYPE eban-loekz,
 statu TYPE eban-statu,
 ekgrp TYPE eban-ekgrp,
 matnr TYPE eban-matnr,
 werks TYPE eban-werks,
 lgort TYPE eban-lgort,
 preis TYPE eban-preis,
 peinh TYPE eban-peinh,
 END OF it_pr.
DATA: BEGIN OF it_mat OCCURS 0,
 matnr TYPE eban-matnr,
 END OF it_mat.
*DATA:BEGIN OF ITAB1 OCCURS 0,
DATA: l_answer.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
 wa_fieldcat LIKE LINE OF it_fieldcat,
 it_event TYPE slis_t_event,
 wa_event TYPE slis_alv_event.
* declaration of variables to be used
DATA: r_ucomm TYPE sy-ucomm,
 mat_no TYPE eban-matnr,
 len TYPE i VALUE 1,
 count TYPE i VALUE IS INITIAL,
 iflag TYPE i VALUE IS INITIAL,
 iflag1 TYPE i VALUE 0.
DATA :pr_id TYPE sy-repid,
rt_extab TYPE slis_t_extab.
INITIALIZATION.
pr_id = sy-repid.
probably it would sol;ve ur problem
regards
ravish
plz dont forget to reward points if helpful

Selection screen changes at selection screen output

Hi all,
I have to make my one block in selection scren invisible based on a particular condition.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_status FOR g_status NO INTERVALS.
PARAMETERS    : p_trans(3) TYPE c,
                 p_hub(3) TYPE c.
SELECT-OPTIONS: s_auart FOR g_auart.
PARAMETERS:      p_buyt(1) TYPE c.
SELECT-OPTIONS:
                 s_order FOR g_vbeln,
                 s_zzhrt FOR g_zzhrtosec,
                 s_vbeln1 FOR g_vbeln1,
                 s_dccode FOR g_dccode NO INTERVALS,
                 s_pgi   FOR g_pgi.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS    : p_c1 AS CHECKBOX USER-COMMAND cmd.
SELECT-OPTIONS: s_list FOR g_list NO INTERVALS MODIF ID sc1.
SELECTION-SCREEN END OF BLOCK blk2 .
SELECTION-SCREEN BEGIN OF BLOCK blk3 WITH FRAME TITLE text-003.
PARAMETERS    : p_c2 AS CHECKBOX USER-COMMAND cmd2.
SELECT-OPTIONS: s_mail FOR g_mail NO INTERVALS MODIF ID sc2.
PARAMETERS:   p_accld LIKE g_saknr DEFAULT '1342009999' MODIF ID sc2
                                                      OBLIGATORY,
              p_accit LIKE g_saknr DEFAULT '1365009999' MODIF ID sc2
                                                      OBLIGATORY,
              p_opacc LIKE g_saknr DEFAULT '346100XX99' MODIF ID sc2
                                                      OBLIGATORY,
              p_lmacc LIKE g_saknr DEFAULT '1393009999' MODIF ID sc2
                                                      OBLIGATORY,
              p_lmopa LIKE g_saknr DEFAULT '3471009999' MODIF ID sc2
                                                      OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk3.
The block 3 'blk3' should be made invisible based on a condition.
I have tried loop at screen-name but its not working.
Kindly advice.
Thanks and Regards,
Divya

Hi Divya,
Check the below code.
tables: pa0000, pa0001.
parameters: p_chk1 as checkbox user-command rusr,
p_chk2 as checkbox user-command rusr,
p_chk3 as checkbox user-command rusr,
p_chk4 as checkbox user-command rusr,
p_chk5 as checkbox user-command rusr.
selection-screen: begin of block blk1 with frame.
select-options: s_pernr for pa0000-pernr modif id ABC,
s_stat2 for pa0000-stat2 modif id DEF,
s_werks for pa0001-werks modif id GHI,
s_persg for pa0001-persg modif id JKL,
s_persk for pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_chk1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_chk2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_chk3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_chk4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_chk5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note
*Titles for check boxes and select options
*P_CHK1 Personal Number
*P_CHK2 Employment Status
*P_CHK3 Personnel Area
*P_CHK4 Employee Group
*P_CHK5 Employee Sub group
*S_PERNR Personal Number
*S_PERSG Employee Group
*S_PERSK Employee Sub group
*S_STAT2 Employment Status
*S_WERKS Personnel Area

AT SELECTION-SCREE / AT SELECTION-SCREEN OUTPUT

Hi,
I have 3 check boxes in my selection-screen. My requirement is if I check any one checkbox out of 3 checkboxes on my selection-screen other two checkboxes should disable ( I mean not editable). Can anybody suggest how to do this. If possible please send me a piece of code.
SELECTION-SCREEN BEGIN OF BLOCK ONE WITH FRAME TITLE TEXT-001.
PARAMETERS: CH_ONE   AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK ONE.
SELECTION-SCREEN BEGIN OF BLOCK TWO WITH FRAME TITLE TEXT-002.
PARAMETERS: CH_TWO   AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK TWO.
SELECTION-SCREEN BEGIN OF BLOCK THREE WITH FRAME TITLE TEXT-003.
PARAMETERS: CH_THREE   AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK THREE.
Thanks and Regards,
Surya.

do this way ..
SELECTION-SCREEN BEGIN OF BLOCK ONE WITH FRAME TITLE TEXT-001.
PARAMETERS: CH_ONE AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK ONE.
SELECTION-SCREEN BEGIN OF BLOCK TWO WITH FRAME TITLE TEXT-002.
PARAMETERS: CH_TWO AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK TWO.
SELECTION-SCREEN BEGIN OF BLOCK THREE WITH FRAME TITLE TEXT-003.
PARAMETERS: CH_THREE AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK THREE.
AT SELECTION-SCREEN OUTPUT.
IF CH_ONE = 'X'.
LOOP AT SCREEN.
IF ( SCREEN-NAME = 'CH_TWO' ) OR ( SCREEN-NAME = 'CH_THREE' ).
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF CH_TWO = 'X'.
LOOP AT SCREEN.
IF ( SCREEN-NAME = 'CH_ONE' ) OR ( SCREEN-NAME = 'CH_THREE' ).
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF CH_THREE = 'X'.
LOOP AT SCREEN.
IF ( SCREEN-NAME = 'CH_TWO' ) OR ( SCREEN-NAME = 'CH_ONE' ).
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.

Using checkbox at selection screen

I used checkbox at selection screen and i want output as per selected checkbox. How to do that??

hiii
use following code
AT SELECTION-SCREEN.
IF p_char EQ 'X'.
    w_check = 'X'.
    WRITE: w_check.
ELSE.
    w_check = ' '.
    WRITE: w_check.
ENDIF.
SELECT b~carrid                      "Carrier Id
         b~connid                      "Connection id
         b~fldate                      "Flight date
         b~price                       "Price
         b~currency                    "Currency
         b~seatsmax                    "Maximum Seats
INTO TABLE t_flight
FROM spfli AS a
       INNER JOIN sflight AS b ON a~carrid = b~carrid
      INNER JOIN sbook AS c ON c~carrid = b~carrid AND
                                       c~connid = b~connid AND
                                       c~fldate = b~fldate
          WHERE b~carrid IN s_carrid AND
                          c~cancelled EQ w_check.
regards
twinkal

Logic for Selection screen output

Hi All,
I have 2 blocks on my selection screen
First block has 3 radio buttons(a, b,c) and second block has 5 check boxes. When i select radio button 'C' 2 checks boxes of 2nd block should be activated (enabled).if RB 'C' is not selected those 2 chck boxes should be in disabled position. an any one help me in this regard.(logic)
Thanks in advance
P.D .Rao

Please check the below code:
REPORT ypra_sample56.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
PARAMETER: p_r1 RADIOBUTTON GROUP rg1 USER-COMMAND vend DEFAULT 'X',
           p_r2 RADIOBUTTON GROUP rg1,
           p_r3 RADIOBUTTON GROUP rg1.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK a2 WITH FRAME TITLE text-002.
PARAMETER: p_c1 TYPE c AS CHECKBOX,
           p_c2 TYPE c AS CHECKBOX,
           p_c3 TYPE c AS CHECKBOX,
           p_c4 TYPE c AS CHECKBOX,
           p_c5 TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK a2.
           INITIALIZATION
INITIALIZATION.
PERFORM enable_fields.
           AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM sel_screen_output.
*&      Form sel_screen_output
      Selection screen Output
FORM sel_screen_output.
IF p_r1 EQ 'X' OR p_r2 EQ 'X'.
    PERFORM enable_fields.
ENDIF.
IF p_r3 EQ 'X'.
    LOOP AT SCREEN.
      IF screen-name EQ 'P_C4' OR screen-name = 'P_C5'.
        screen-active = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
ENDFORM.                    " sel_screen_output
*&      Form enable_fields
      enable fields in selection screen
FORM enable_fields .
IF p_r1 EQ 'X' OR p_r2 EQ 'X'.
    LOOP AT SCREEN.
      IF screen-name EQ 'P_C4' OR screen-name EQ 'P_C5'.
        screen-active = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " disable_fields
Use screen-input = '1' to enable and screen-input = '0' to disable the checkbox. And if u want to totally make that field disappear from screen use screen-active = '1' and '0'.
Regards,
Prakash.
Message was edited by: Prakash Ramu

Model program of at selection screen output

hi frends
pls giv me the model code of at selection-screen output event in Reports

Hi Vishnu,
Follow this code.
SELECT-OPTIONS: DATE FOR SY-DATUM NO INTERVALS MODIF ID A.
PARAMETERS: P_DATE1 LIKE SY-DATUM DEFAULT SY-DATUM.
PARAMETERS: P_DATE2 LIKE SY-DATUM DEFAULT SY-DATUM.
PARAMETERS CH1 AS CHECKBOX USER-COMMAND UR1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF CH1 = 'X' .
      IF SCREEN-group1 = 'A'.
      SCREEN-ACTIVE = '0'.
      endif.
      IF SCREEN-NAME = 'P_DATE2'.
        SCREEN-INPUT = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
if ch1 = 'X'.
p_date1 = p_date1 - 3.
endif.
Rewards if useful.
Vijay.

AT SELECTION-SCREEN OUTPUT.

Hi All,
I have a selection screen which i need to influence before it is shown in the screen after the transaction is executed.
I want the user to influence one of the fields in selection screen by an user exit.So if in the user exit the parameter is set by the user ,then only that particular field should be enabled or else it should be disabled.
I know i can use AT SELECTION-SCREEN OUTPUT.
but i am not sure that i can influence it with an user exit.
Could anybody let me know the logic or code to write this.
It would be very much help full.
Regards,
Priya.

Hi Priya,
you can make properly for loop at screen. with modify screen..
it applied for enabled or disabled screen proceed.
thx,
s.suresh

At selection screen output dialog

how i can make
i have customer i want when i click enter to get the description.
the program is dialog , i get always err,and when i put in PBO or PAI.

Hi Little ,
What i understand is that you are working on a report and not a module pool.
If it is a report then you will first have to modify the selection screen , go to SE51 , put in the program name and the screen number ( which is generally 1000) , on the screen add a new I/O box which is for Output only let it be KNA1-NAME1 .
Now you need to write the code in the event AT SELECTION-SCREEN OUTPUT .
Here is the sample code for the same
tables : kna1.
parameter : kunnr type kna1-kunnr.
at selection-screen output.
if not kunnr is initial.
select single name1 into kna1-name1
from kna1
where kunnr = kunnr.
endif.
Hope this helps.
Regards
Arun

At selection screen output problem

Hi all,
I am trying to make a few fields disabled based on the selection of a radio button. I have done it in dialog programming, but in report its not working. Please tell me where i have gone wrong. My code:
* Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER : rb_dwld RADIOBUTTON GROUP radi DEFAULT 'X',
            rb_upld RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
SELECT-OPTIONS : so_cctrl FOR /dceur/z_crconar-crdt_ctrldsa MODIF ID
                                         sc1 NO INTERVALS OBLIGATORY,
                 so_cusno FOR /dceur/z_crdtlmt-dealer MODIF ID sc1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
SELECT-OPTIONS : so_ctrl1 FOR /dceur/z_crconar-crdt_ctrldsa MODIF ID
                                         sc2 NO INTERVALS OBLIGATORY.
PARAMETER pa_fname TYPE rlgrap-filename MODIF ID sc2.
SELECTION-SCREEN END OF BLOCK b3.

Hi,
Please check the below code.
This is one of my requirement.
* Creation of two blocks with parameter fields for create and update
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETER p_create LIKE rlgrap-filename MODIF ID crt.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME.
PARAMETER p_update LIKE rlgrap-filename MODIF ID upt.
SELECTION-SCREEN: END OF BLOCK b2.
* Making one parameter field active at a time
AT SELECTION-SCREEN OUTPUT.
IF rb_crt = 'X'.                              "CREATE BUTTON IS SELECTED
    PERFORM hide_rb_options.
    CLEAR p_create.
ELSE.                                         "UPDATE BUTTON IS SELECTED
    PERFORM hide_rb_options.
    CLEAR p_update.
ENDIF.
*&      Form hide_rb_options
FORM hide_rb_options .
IF rb_crt = 'X'    .
    LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CRT'.
          screen-active = 1.
          MODIFY SCREEN.
        WHEN 'UPT'.
          screen-active = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'UPT'.
          screen-active = 1.
          MODIFY SCREEN.
        WHEN 'CRT'.
          screen-active = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
ENDIF.
ENDFORM.                    " hide_rb_options
May it helps you.
Regards.
DS.

At-selection screen output and radio button together

Hi all,
I want to make a screen with radio buttons and a drop down menu on selection screen as soon as I check any button and click on Open from drop down menu the output should come according to the button cheked but the problem is that desired output is not coming.
Please see if something could be done.
Thanks,
Shweta

Hi,
Here is the code see y it didnt responds,
I made ZMENU2 in SE41 with Menu bar as OPEN , also activated buttons BACK and EXIT.
tables : sscrfields.
CONSTANTS : buttonselected TYPE c LENGTH 1 VALUE 'X'.
DATA: ok_code LIKE sy-ucomm.
SELECTION-SCREEN BEGIN OF BLOCK frame1 WITH FRAME TITLE text-001.
SELECTION-SCREEN ULINE /1(60).
PARAMETERS: first RADIOBUTTON GROUP rad DEFAULT 'X',
second RADIOBUTTON GROUP rad,
third RADIOBUTTON GROUP rad,
fourth RADIOBUTTON GROUP rad,
fifth RADIOBUTTON GROUP rad.
SELECTION-SCREEN END OF BLOCK frame1.
AT SELECTION-SCREEN OUTPUT.
SET PF-STATUS 'ZMENU2'.
If first = buttonselected and ok_code = 'OPEN'..
         WRITE 'You selected first button'.
    ELSEIF second = buttonselected and ok_code = 'OPEN'..
        WRITE 'You selected second button'.
    ELSEIF third = buttonselected and ok_code = 'OPEN'.
        WRITE 'You selected third button'.
    ELSEIF fourth = buttonselected and ok_code = 'OPEN'.
        WRITE 'You selected fourth button'.
    ELSEIF fifth = buttonselected and ok_code = 'OPEN'.
        WRITE 'You selected fifth button'.
    ELSEIF ok_code ='BACK'.
       LEAVE PROGRAM.
    ELSEIF ok_code ='EXIT'.
      LEAVE PROGRAM.
ENDIF.

Checkbox ,at selection screen output

Similar Messages

Maybe you are looking for