Checking the ABAP connection - error

Hi
According to the ADS config guide for NW2004s, I wanted to test the ABAP connection. I went to t.code SA38, entered FP_PDF_TEST_00 and entered the connection name, and when I execute it I get the error
Error Code: 2
Error Message: ADS
Invalid http conenction: ADS
No version available.
Can anyone please explain me where and how should I set the http conenctions to make this test successful.
Thanks in advance
regards
SM

Hi SM,
Programs FP_PDF_TEST_00 & FP_TEST_00 are completely different.
The program FP_PDF_TEST_00 that you run is just returns ADS version only.
If you execute the program FP_TEST_00, it will show you PDF output. That is this program takes the PDF form name FP_TEST_00 in the selection-screen parameter and also ADS destination name and will return you the PDF Output.
Basically you will do the following steps to run an Adobe Form.
1. Get the generated function module name for the Adobe form using function module FP_FUNCTION_MODULE_NAME.
2. Call the function module FP_JOB_OPEN. here we have to pass ADS connection, Device name, No dialog option...etc
3. Call the generated function module , here we an pass SAP data from the print program.
4. Call the function module FP_JOB_CLOSE.
For more information, check the program FP_TEST_00 code .
Thanks
Ramakrishna

Similar Messages

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

UNCAUGHT_EXCEPTION is the ABAP Runtime error

Hi all,
Our Production System BI7.0 with oracle 10g running on Unix . The UNCAUGHT_EXCEPTION is the ABAP Runtime error exists in ST22.
Please find the Error analysis from ABAP Dump of UNCAUGHT_EXCEPTION.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_SDB_ORA_PROGRAM_ERROR', was not
     caught and
    therefore caused a runtime error.
    The reason for the exception is:
    An error occurred in the program:
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_SQL_EXCEPTION", which was raised in the program
     "CL_SQL_STATEMENT==============CP",
    specifically in line 31 of the (include) program
     "CL_SQL_STATEMENT==============CM002".
    The cause of the exception was:
    ORA-04031: unable to allocate 62208 bytes of shared memory ("shared
    pool","DBMS_STATS","PL/SQL MPCODE","BAMIMA: Bam Buffer")#ORA-06508: PL/SQL:
    could not find program unit being called: "SYS.DBMS_STATS"#ORA-06512: at line 1
Thanx,
Peter

Hi Peter,
You shared pool might be too small
Read,
SAP Note 869006 - Composite SAP note: ORA-04031
Regards
Juan

I am geeting problem whem i run bulk insert query i got error Location:_ bcpimp.cpp:1797 Expression:_ cbOutTemp cbOutputStr SPID:__ 52 Process ID:_ 2364 Msg 3624, Level 20, State 1, Line 3 A system assertion check has failed. Check the SQL Server error

Location: bcpimp.cpp:1797
Expression: cbOutTemp < cbOutputStr
SPID: 52
Process ID: 2364
Msg 3624, Level 20, State 1, Line 3
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

If you check your sql server error log folder you will see dump files created. You need to send those dump files to Microsoft for inspection because outside of microsoft product support the symbols for reading the dumps are not available without which it
wont be easy to find the issue.
http://support.microsoft.com/kb/2028589
In the meantime check if you are on the latest version of Service Pack and if not apply the latest service pack. Majority of these kind of assertions are bugs which are solved in Service Packs/Cumulative Updates.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

Handle the Network Connection Error ...

The main purpose is to handle the Network Connection Error,
when there is a Network Connection Error or pc loss the
connection (remove the ETH cable),
and it work in IE but not with firefox.
When there isn't connection during play of sound1, Flash call
"sound1.onSoundComplete" that point to an other frame, where i load
an other es:Sound2.mp3, BUt there isn't connection and Flash call
"sound1.onLoad" with "success=false" and that's OK because i handle
the error for example retry to load every 10 Seconds.
With Firefox when it happens the player call load sound2.mp3
but there isn't connection and it can't find the file (OK) BUT is
NOT CALL the "sound2.onLoad" and STOPS it in this frame mute and
nothing more happens.
This is the sample Code:
//on frame (1)
sound1 = new Sound();
sound2 = new Sound();
//on frame (2)
sound1.onLoad = function(success) {
if (success) {
//on load OK...
trace("Sound1 loading ok...");
} else {
//on load FAIL...
trace("Sound1 error ...");
//call error function. (es: goto frame 1 and reload all.)
_root.sounderror();
sound1.loadSound("sound1.mp3", true);
sound1.setVolume(100);
sound1.onSoundComplete = function() {
//goto next frame and load the Second sound
gotoAndStop(3);
//on the Frame-3
//there is the same code but with sound2 and
"onSoundComplete" -> gotoAndStop(2); for a loop of the two
sounds.
Thanks in advance for HELP ME.
PLAEASE READ and Comment!!!
This is my work! Sorry for the Bad English.

Thanks for your support, i have modify like your suggest but
the problem continue.
I've notice that in local work very fine also with Firefox. i
try during play to remove in one shot all mp3 file, and it call the
error handler function correctly, But if i put it on the web, when
i unplug the eth cable, it stop after sound2 or 3.loadsond and
write me back it in a text box, stop! it NOT Call the onload
triger, and do not call the error function.
WHY ?!? in local work whit all browser, and on web only with
IE?
HELP ME PLEASE!
Post the new code:
//Frame#1
soundintro = new Sound();
sounda = new Sound();
soundb = new Sound();
soundintro.onLoad = function(success) {
if (success) {
//find soundi - wait for onsoundcomplete...
} else {
//Sound error
//Lunch error hander function.
_root.sounderror();
soundintro.onSoundComplete = function() {
debug1 = debug1+("Trace-> soundintro Complete
goto2..."+chr(13));
gotoAndStop(2);
d = new Date();
soundintro.loadSound("soundintro.mp3?r="+d.getTime(), true);
soundintro.setVolume(100);
stop;
//Frame#2
sound2.onLoad = function(success) {
if (success) {
//find sound2 - wait for onsoundcomplete...
} else {
//Sound error
//Lunch error hander function.
_root.sounderror();
sound2.onSoundComplete = function() {
debug1 = debug1+("Trace-> sound2 Complete
goto3..."+chr(13));
gotoAndStop(3);
d = new Date();
sounda.loadSound("sound2.mp3?r="+d.getTime(), true);
sounda.setVolume(100);
stop;
//Frame#3
sound3.onLoad = function(success) {
if (success) {
//find sound3 - wait for onsoundcomplete...
} else {
//Sound error
//Lunch error hander function.
_root.sounderror();
sound3.onSoundComplete = function() {
debug1 = debug1+("Trace-> sound3 Complete goto back
to2..."+chr(13));
//Back to 2 for loop
gotoAndStop(2);
d = new Date();
sound3.loadSound("sound3.mp3?r="+d.getTime(), true);
sound3.setVolume(100);
stop;

While uploading the excel BOM to SAP in PRD getting the ABAP dump error not

Hi Experts,
While uploading the excel BOM to SAP in PRD getting the ABAP dump error not able to proceed further.
and if I visit ST22 t code it is telling that :RAISE_EXCEPTION and DYNPRO_NOT_FOUND.
PLease help.
Regards,
Mohan

Hi,
Better ask this question in ABAP forums.
Regards,
Harsh.

TS4268 iMessage and FaceTime are saying check the network connection and try again.

iMessage and Facetime started saying check the network connection and try again two days ago.

This same issue occurred with my IPhone 4S after updating to most recent iOS last week.
I tried http://support.apple.com/kb/ts4268 - this unfortunately did not help.
Suggestions?

My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

About the generic connectivity error.

I use the Generic Connectivity to link a mySQL database and appeared some mistakes:
ORA-28500: [Generic Connectivity Using ODBC][MySQL][ODBC 5.1 Driver]Access denied for user 'SA'@'SERVER' (using password: YES) (SQL State: S1000; SQL Code: 1045)
Is that the reason why?
I checked once, that my ODBC parameter establishes normally.

you need to surround the username and password while creating the database link to SQL Server with DOUBLE QUOTES.
Look at the error message; it states: SA instead of sa.
As MS SQL Server usernames/passwords as well as columns and tables are case sensitive for some settings you need to define the db link using double quotes as follows:
create database link server connect to "sa" identified by "PaSSworD" using '<tns alias>':

How to check the database connection using OCI

I am working on enhhancement of very old application developed using C and OCI. It has a background process which acts as a middleware for interaction of any other front end process with oracle database. Any processes, which needs to interact with database sends a request to background peocess and then it will execute a call to execute the stored procedures for performing requested operation (like select, update, insert) on table and will send the result back to respective process. So this process has to be always running in background and connected to branch database.
If branch database gets restarted or connection gets dropped due to some ad-hoc problem then the background process also has to be restarted manually. Because this process establishes the connection to branch database only once on start up and it does not have the intelligence to reconnect automatically in such scenario.
I am looking forward to build the intelligence in this process to automatically reconnect if connection with branch database is lost. But I am not familer with OCI, and I am not sure if there is any OCI call which can determine if my earlier connection is still available. Can any one please tell me if there is any other way to check the connection other than the execution of dummy query, then check if it gets executed properly and then do the actual query.
Thanks in advance,
Deeapk

Hi,
If you are reworking the application can you not build in the functionality to re-establish a connection if there is a failure? That is, a submission from the application server to the database server detects a failure, etc. and then re-establishes the connection. If you need a more frequent check than during a user-initiated roundtrip, you may be best served by using the "dummy query" technique on some time interval.
From my understanding using HA Event Notification would require a RAC database (plus a multi-threaded application and services correctly configured on the RAC-side).
In the documentation I see this:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14250/oci09adv.htm#sthref1495
"Applications must connect to a RAC instance to enable HA event notification."
In any case, this has the potential to be a bit complicated...
Regards,
Mark

Help with Ipad software download, when it finishes downloading the message: connection error, appears!

Can someone help me please. I can't update my ipad!

If you are getting a network timeout then try temporarily turning off your firewall and antivirus software until the download has completed.

For whatever reason Firefox keeps displaying the "Untrusted Connection" error due to my company's firewall.

I have at least three dozen instances of adding a certificate override for google (Logged on Certificates/Other) and it pops up every time I start the browser. Furthermore now it's no longer giving the override option, instead only giving me the technical details and the "get me out of here" without the override option. There's no way to make the company's site overall accepted as a security certificate so it requires adding an exception to most sites I go to and it's really annoying and is causing me problems at work. Switching to chrome may have to happen if I cannot even access my e-mail using this browser. I had to launch it just to register on the forums for gods sake! Why can't I override the security certificates for my company's firewall?!

Best would be to get the root certificate of that firewall and install this certificate in Firefox and set the appropriate trust bits.
Do other browsers like IE also have this problem as it is possible that this root certificate has been installed for IE, but not for Firefox?
Which firewall is used?
You can try to contact the IT department to see if they have a solution for Firefox.

ABAP connect SQL run SQL insert into Error

Dear All
         I have a problem in ABAP connect SQL,Below is my code snippet sentence.
CONCATENATE 'Insert Into [timportcortrol]'
                '(zucode,zstate,zdate,zkind) Values('''
                  VG_PCID ''','''
                  '1'','''
                  SY-DATUM ''','''
                  '1' ''')'
                 INTO SQL.
    CALL METHOD OF REC 'Execute'
     EXPORTING #1 = SQL
     #2 = CON
     #3 = '1'.
IF NOT SY-SUBRC = 0.
    MESSAGE I000 WITH 'Download to [timportcortrol] failure，Please Check the SQL Connect!!! '.
    EXIT.
ENDIF.
"Con:is the connect SQL String ,the connect SQL is Okay.
I debug this code,when I used u2018Select u2026sentenceu2019,the program can work.if I use u2018insert intou2019 then canu2019t work,but I copied the SQL of the u2018inset Into sentenceu2026u2019run it into SQL server then it can work also.
And I found the SY-SUBRC eq u20182u2019.whatu2019s mean about of the sy-subrc eq u20182u2019.
I think the insert into sentence in abap I have write the wrong ,but I canu2019t assurance.
The Insert Into Sentence is:u2019 Insert Into [timportcortrol](zucode,zstate,zdate,zkind) Values('20080807094713','1','20080807','1')u2019
Could you give me some advice for this issue?
Thanks of all
Sun.

Hi
I think the problem is with the date format "20080807094713". You should know first how the date is stored in the underlying database. In that format we have to pass the date in the SQL DML statements.
Try "07-Aug-2008' for example and check.
Hope it helps.
Murthy

"The Network Adapter could not establish the connection" error

I'm intermittently able to connect into my development database from my PC. When I'm not able to connect in, I'm getting a message of "The Network Adapter could not establish the connection" regardless of the client I'm connecting with. This database is located on a server and is Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production. I have a local install of WebLogic Server that has generated the error message when attempting to start. I have also received the message in SQL Developer and SQL Plus.
As I stated in my first sentence, the issue is intermittent this morning - sometimes I can connect and sometimes I can't...
I've been working successfully in this database for months now without this issue, so I'm guessing that the database itself is having issues, but I'm not a DBA...just a measly developer trying to use the database ;)
Are there good questions for me to ask of my DBA or ways to discover what could be causing the issue? Or, is there something I can do on my machine to get around this?

!. Suggest contacting your DBAs first, but Id suggest seeing if the connection is up.
when you get it, check the tns connection. open a dos window
firstly tnsping the database name
tnsping <SID of database from your tnsnames.ora>
then try ping the machine where that SID is
then try telnet to the port of the database thats in your tnsnames.ora
telnet <host> <port>
if you get a blank screen then you know at least the listener is up and running on that machine. CTRL + [ will back you out of the telnet session.

Checking the ABAP connection - error

Similar Messages

Maybe you are looking for