Clarification regarding clickToEdit table

Hi,
I am using JDeveloper 11.1.1.6 and here is my requirement. I have just gone through the oracle documentation for af:table and found this.
In "clickToEdit" mode, quick row navigation is supported with arrow up/down key by changing to read-only mode with Esc key. Hitting F2 or Enter key changes the row back to edit mode with focus on the column that was previously focused. Here is how it works by clicking the following keys:
Esc Key
When the edit navigation focus is within an input component and hitting Esc, reverts the cell back to its original value. Navigation focus is at the cell level to enable navigation between cells. Then the user hits Esc key again, the row goes into read only mode.
When it is in edit mode and the cell has focus, hitting Esc changes the row directly into read only mode.
Once focused row is in read-only mode, user can use the arrow up/down key to quickly navigate between rows.
F2 Key
When in read only mode and the user hits F2 key, it takes the user into edit mode. Hitting F2 again (now that you are in edit mode) will turn off cell navigation mode so that user can navigate within cell or input component.
Enter Key
When in read only mode and the user hits enter key, it changes to edit mode and the focus is on the previously focused column.
I want to use this feature but my af:table is inside the popup. The problem is when I press Escape the popup closes.
Is there anyway that can I make this work?
Thanks
Nitish

Check out Frank's article http://www.oracle.com/technetwork/developer-tools/adf/learnmore/feb2012-otn-harvest-1538028.pdf
Topic 'strategies for controlling Ann af:popup close event'
Timo

Similar Messages

Clarification regarding Shadow Table

Hi All,
Clarification regarding Shadow Table. FKK_GPSHAD is a shadow table that belongs to Business Partner. The doubts that i have is
What is Shadow Table?
What is the purpose of Shadow table?
Is it correct way to update Shadow table Manually(Not using any BAPi etc....)?
Is any BAPI available to update The above mentioned Shadow table.
Thanks in Advance..

Reclustering InfoCubes:
With reclustering, the InfoCube fact tables are always completely converted. The system createsshadow tables with a new clustering schema and copies all of the data from the original tables into the shadow tables. As soon as the data is copied, the system creates indexes and the original table replaces the shadow table. After the reclustering request has been successfully completed, both fact tables exist in their original state (name of shadow table) as well as in their modified state with the new clustering schema (name of original table).
You can only use reclustering for InfoCubes. Reclustering deactivates the active aggregates of the InfoCubes; they are reactivated after the conversion.
Reclustering DataStore Objects
Reclustering completely converts the active table of the DataStore object. The system creates a shadow table with a new clustering schema and copies all of the data from the original table into the shadow table. As soon as the data is copied, the system creates indexes and the original table replaces the shadow table. After the reclustering request has been successfully completed, both active tables exist in their original state (name of shadow table) as well as in their modified state with the new clustering schema (name of original table).
You can only use reclustering for standard DataStore objects and DataStore objects for direct update. You cannot use reclustering for write-optimized DataStore objects. User-defined multidimensional clustering is not available for write-optimized DataStore objects.
Pls chk this thread:
Shadow Table?
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/5cf74153b6ca17e10000000a155106/content.htm
Hope this helps,
Reward points...

Needs Clarification Regarding Segments and Datafiles

Hi,
I want clarification regarding Segments, Datafiles and extents.
As we know that A segment is made of one or more extents and extents are composed of one or more datablocks in the HD.
Since all data are store in Datafiles which are composed of extents and datablocks. I want to know weather a table(Segment) can span to multiple datafiles or in a sigle datafile.
Regards,
D.Abbasi

And an easy way to check it by yourself :
SQL> create tablespace abbasi_tbs
2 datafile 'E:\ORADATA\DEMO111P\abbasi_01.dbf' size 1m autoextend off,
3 'E:\ORADATA\DEMO111P\abbasi_02.dbf' size 1m autoextend off;
Tablespace created.
SQL> create table abbasi_tbl (id number)
2 tablespace abbasi_tbs;
Table created.
SQL> insert into abbasi_tbl
2 select rownum as rn
3 from dual
4 connect by level <=10000;
10000 rows created.
SQL> commit;
Commit complete.
SQL> select distinct file_id
2 from dba_extents
3 where segment_name ='ABBASI_TBL';
 FILE_ID
 6
 7
or...
SQL> select distinct DBMS_ROWID.ROWID_RELATIVE_FNO(rowid)
2 from abbasi_tbl;
DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID)
 6
 7
SQL> select file_name from dba_data_files where file_id in (6,7);
FILE_NAME
E:\ORADATA\DEMO111P\ABBASI_01.DBF
E:\ORADATA\DEMO111P\ABBASI_02.DBF
SQL>Nicolas.
added the ROWID function usage
Edited by: N. Gasparotto on Jun 21, 2009 11:02 AM

JSF Error Message not displaying/popping up in clickToEdit table

I have an entity object validation rule which displays a message when the validation fails. I have set the Validation Failure Severity as an Informational Warning. I do want to user to continue if he is happy to do so. Everything works fine when testing in the model project.
Now, in the ViewController project when I add the View Object to a page as a af:table component the Warning message only comes up if the tables Behavior/EditingMode property is equal to editAll AND if the inputText Behavior/AutoSubmit property is false. It actually seems like this is the only time the validation is performed…
If I change the tables Behavior/EditingMode property to be clickToEdit the warning message does not come up anymore?
If I change the inputText Behavior/AutoSubmit property equal to true, then the warning messagewill not come up in ether of the editAll or clickToEdit table. A orange border will be displayed in the editAll table, but no message?
What is the difference, and how can I get the warning message to be displayed when the table is clickToEdit table?
I am using JDeveloper 11.1.1.3 PS2
Thanks

Hi
Just to mention. It seems this issue was a bug in 11.1.1.3, and it is fixed in 11.1.1.4...
I still don't know how to get around the problem in 11.1.1.3, but atleast it is working in the latest version.

OIM - query regarding child tables

Hi All
I have a query regarding child tables. For example, when a user is removed from an AD group, his corresponding entry from the AD groups child table will be deleted. I want to know whether it is deleted of marked as deleted. Can I get the information later on that the user was removed from which AD group?
Please help.
Thanks

You will have to enable the audit level = Resource Form and perform the additional tasks to track the process form data changes. This will track all modifications to the forms.
-Kevin

Needs Clarification Regarding Listener.ora file

I want a clarification regarding listener.ora file I've Listener.ora file and its content look like as:
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Oracle8)
(SID_NAME = ORCL)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.10.10)(PORT = 1521))
I can understand every entry in this file accept the following
*(SID_DESC =*
*(SID_NAME = PLSExtProc)*
*(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)*
*(PROGRAM = extproc)*
*(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))*
Although rest of entries refer to network services(Database name) and host address and protocol etc.
what these above refere to.
Please clarify me in this.
Regards,
D.Abbasi

(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
that about External Procedure, If you don't use "External Procedure" you can remove it, by the way you should avoid default configure.
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#sthref1331
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#NETAG0132
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_extern_proc.htm#sthref1658
Sample create External Procedure:
http://surachartopun.com/2008/07/create-and-run-sample-external.html

Some clarifications regarding Aironet settings

Hi,
i need some clarifications regarding configuring Aironet stand-alone AP (in this case AIR-LAP1131AG).
Under Security->SSID Manager:
what is the purpose of Network ID?
Under Guest Mode/Infrastructure SSID Settings - what is the purpose of Set Infrastructure SSID?
and Force Infrastructure Devices to associate only to this SSID?
Cheers,

Assign a Service Set Identifier (SSID) to each VLAN configured on the AP. SSIDs enable endpoints to select the wireless VLAN they will use for sending and receiving traffic. These wireless VLANs and SSIDs map to wired VLANs. For voice endpoints, this mapping ensures priority queuing treatment and access to the voice VLAN on the wired network
For further information click this link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42nstrct.html#wp1098806

Need clarification regarding select query

Hi,
I need a little clarification regrding a Select senario
I want to select data from table which have been minupulated between a certian date like between 1-DEC-10 to 31-DEC-10 and note that table does not have any time/date column. I've applied the following query to do this.
select * from TABLE_NAME where sysdate between to_date('01-DEC-10') AND to_date('31-DEC-10');
Would it work fine because I've tried it against a table and it returned me nothing however DML occur between time period.
Regards,
Abbasi

Abbasi wrote:
Hi,
I need a little clarification regrding a Select senario
I want to select data from table which have been minupulated between a certian date like between 1-DEC-10 to 31-DEC-10 and note that table does not have any time/date column. I've applied the following query to do this.
select * from TABLE_NAME where sysdate between to_date('01-DEC-10') AND to_date('31-DEC-10');
Would it work fine because I've tried it against a table and it returned me nothing however DML occur between time period.
Regards,
AbbasiAFAIK without log mining and auditing this is not possible.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/logminer.htm

Need Clarification On Internal tables in Start Routine

Hi,
I have intenal table some IT_A which deletes the requests which are populated in to it.
Now I need to populate requests into IT_A from another internal table like IT_B which are of different structure.
I have three fields in common in both internal tables like RNR,Timestamp n SID with different field names
I Need Clarification that if i move the contents of the three fields to IT_A from IT_B by spcifying these three fields.Will the internal table IT_A deletes the Requests?
Thanks,
Sriram.

Hi Sriram,
As mentioned IT_A deleted the request loaded into it.
if you move the contents of the three fields to IT_A from IT_B by spcifying the three fields after the deletion step for internal table IT_A takes place then it wont get deleted.
But it would be deleted if the the contents are moved before the deletion step takes place
regards,
mahesh

Regarding dynamic tables in interactive forms

Hi All,
 I have designed a webdynpro view which contains a table,i have to generate a pdf format file which also contains
a table as there in the webdynpro view.
 I have designed a dynamic table in interactive form and binded the interactive form ui element with the datasource and pdfSource.
In the interactive form i am getting only one row data of webdynpro view table.In the Object palette, I selected Repeat Row For Each Data Item.
 share with me if u have any idea or send any document regarding table binding(dynamic) in interactive form.
Thanks & Regards,
saleem

Hi saleem..
Check this link..
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0401535-f81c-2a10-0192-ffd41e8e8d59">Dynamic interactive forms an example</a>
https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#47
Urs Gs

Regarding interface tables in CATS

Hi Experts,
Can any body briefly explain about the interface tables in cats for integration of cats of HR,PS and FICO modules and highlight on the technical intricacies in this data transfer between cats and target modules like HE,PS and FICO.
Points will be rewarded.
Thanks and regards,
Sravanthi.

Hello Sravanthi
With respect to the CATS - HR integration you may have a look at the BAPI BAPI_TIMESHEET_HR_DATA_TRNSFER and its documentation:
FU BAPI_TIMESHEET_HR_DATA_TRNSFER
Short Text
 Transfer of CATS II Data to HR
Functionality
 This method transfers time data from the Time Sheet to the HR system.
 The time data is stored in the HR system in the following infotypes:
 o Absences (2001) infotype
 o Attendances (2002) infotype
 o EE Remuneration Information (2010) infotype
 Information about a different payment and cost assignment is also
 transferred. This method does not support activity allocation.
Notes
 The data records are stored in the following tables:
 o Attendances/absences: interface table PTEX2000 and PTEXDIR.
 The transfer report then reads the data from file PTEX2000 and
 creates it as attendances in infotype 2002 or as absences in
 infotype 2001.
 o EE remuneration info: interface table PTEX2010 and PTEXDIR.
 The transfer report then reads data from file PTEX2010 and creates
 it as employee remuneration information in infotype 2010.
Further information
 Method Check LINK allows you to check the data before it is transferred.
 This method is used to call the following BAPIs in the HR system before
 the data is transferred to the HR system:
 o BAPI_PTMGREXTREMSPEC_INSWCOST
 o BAPI_PTMGREXTATTABS_INSWCOST
Parameters
 TRANSFER_RECORDS
 RETURN
Exceptions
Function Group
 BAPI_CABA_HR
Regards
Uwe

Regarding Internal Table Field Validation [Modification]

Hi All,
I have a small issue with formatting of a field.
The Field is POTX1 - it would get the value as 'New MT-EPPE0097-COMP02',
Means i have one internal table field as i_error-POTX1 in that some times we get value as 'New MT-EPPE0097-COMP02'.
Whenever i get 'New' literal in that internal table field i have to remove that literal from that internal table field. And Left Justify the remaining part of the field.
Ex: 'New MT-EPPE0097-COMP02'
     should become 'MT-EPPE0097-COMP02'.
For this first i have to find wether 'New' Literal exists in the Internal table field or not then i have to remove it.
Can anybody tell me how can i solve this issue.
Thanks in advance.
Thanks & Regards,
Rayeezuddin.

Hi,
Take a look :
loop at i_error.
if i_error-potx1(3) = 'New'
    w_potx1 = i_error-potx1.
    i_error-potx1 = w_potx1+3(37).
    MODIFY i_error.
endif.
ENDLOOP.
Regards,
Erwan.
Message was edited by: Erwan LE BRUN

Regarding Internal Table Manipulation

Hi All,
I have a issue when working against Internal Table inside a function module.
Issue is:
My I.Table declaration is as below:
DATA: BEGIN OF i_vbfa_tab OCCURS 0.
 INCLUDE STRUCTURE vbfa.
DATA: END OF i_vbfa_tab.
Then in code i had written following logic:
SELECT VBELV
 VBELN
 VBTYP_N
 VBTYP_V
 FROM VBFA
 INTO ( V_VBELV, V_VBELN, V_VBTYP_N, V_VBTYP_V )
 WHERE VBELN = V_SO_ORDER2 AND
 VBTYP_N = 'G' AND
 STUFE = '00'.
IF SY-SUBRC EQ 0.
 I_VBFA_TABVBELN = V_VBELN.
 I_VBFA_TABVBELV = V_VBELV.
 I_VBFA_TABVBTYP_N = V_VBTYP_N.
 I_VBFA_TABVBTYP_V = V_VBTYP_V.
 APPEND I_VBFA_TAB.
 CLEAR I_VBFA_TAB.
ENDIF.
Then when i am checking for F2[Syntax] it is giving error as 'The Field I_VBFA_TAB-VBELN is unknown'. This is the case with all 4 assignment statements.
Can anybody tell me what is the issue over here.
What can i do to assign those values to internal table and append. I had tried with MOVE that is also giving same error.
Can anybody solve my issue.
Thanks in advance.
Thanks & Regards,
Prasad.

If you are doing something like:
call function 'Z_FUNC'
tables i_vbfa_tab = vbfa_tab.
and in the FM:
function z_func
*" TABLES
*" i_vbfa_tab STRUCTURE vbfa OPTIONAL
perform get_vbfa.
and then in an include
form get_vbfa
SELECT VBELV
VBELN
VBTYP_N
VBTYP_V
FROM VBFA
INTO ( V_VBELV, V_VBELN, V_VBTYP_N, V_VBTYP_V )
WHERE VBELN = V_SO_ORDER2 AND
VBTYP_N = 'G' AND
STUFE = '00'.
I think you'll get the syntax arror you describe. Try:
call function 'Z_FUNC'
tables i_vbfa_tab = vbfa_tab.
and in the FM:
function z_func
*" TABLES
*" i_vbfa_tab STRUCTURE vbfa OPTIONAL
perform get_vbfa
 tables i_vbfa_tab.
and then in the include
form get_vbfa
 tables i_vbfa structure vbfa.
data: v_vbelv like vbfa-vbelv,
 v_vbeln like vbfa-vbeln,
 v_VBTYP_N like vbfa-VBTYP_N,
 v_VBTYP_v like vbfa-VBTYP_v,
SELECT VBELV
VBELN
VBTYP_N
VBTYP_V
FROM VBFA
INTO ( V_VBELV, V_VBELN, V_VBTYP_N, V_VBTYP_V )
WHERE VBELN = V_SO_ORDER2 AND
VBTYP_N = 'G' AND
STUFE = '00'.
IF SY-SUBRC EQ 0.
I_VBFA_TABVBELN = V_VBELN.
I_VBFA_TABVBELV = V_VBELV.
I_VBFA_TABVBTYP_N = V_VBTYP_N.
I_VBFA_TABVBTYP_V = V_VBTYP_V.
APPEND I_VBFA_TAB.
CLEAR I_VBFA_TAB.
ENDIF.
I didn't test this, so if you use it, test it thoroughly.
Rob

Regarding internal table read.

Hi,
i want to read internal table and compare the one variable existing with in from date and to date.
the psudo code is like this
READ TABLE L_TABEMPLOYEE INTO L_WAEMPLOYEE WITH KEY EMPLOYEE = SOURCE_FIELDS_RULE-PERNR
ULTIMO BETWEEN L_WAEMPLOYEE-DATEFROM AND L_WAEMPLOYEE-DATETO.
but this statement gives error.
how to code for the same requirement.
regards,
swami.

Hi,
Recode like this.It will definitely work
LOOP AT L_TABEMPLOYEE INTO L_WAEMPLOYEE
 WHERE EMPLOYEE = SOURCE_FIELDS_RULE-PERNR
 AND ULTIMO > L_WAEMPLOYEE-DATEFROM
 AND ULTIMO < L_WAEMPLOYEE-DATETO.
<Write what you want to do here >
ENDLOOP.
Please reward if useful
Thanks Arjun
Edited by: Arjun Puthuruthy on Mar 26, 2008 10:52 AM

Regarding Internal table and access performance

hey guys.
In my report , Somehow i reduced the query performance time by selecting minimum key fields and moved the selected records to internal table.
Now from this internal table i am restricting the loop
as per my requirements using where statements.(believing that internal table retrieval is more faster than database acces(using query)).
But still my performance goes down.
Could you pls suggest me how to reduce the execution time
in abap programming.
I used below commands.
Read using binary search.
loop ...where statement.
perform statements.
collect staements.
delete itab.(delete duplicates staements too)
sort itab(sorting).
For each above statements do we have any faster way to retrieval records.
If i see my bottle neck at se30.it shows
ABAP programming to 70 percent
database access to 20 percent
R3 system as 10percent.
now how to reduce this abap process.
could you pls reply.
ambichan.
ambichan.

Hello Ambichan,
It is difficult to suggest the improvements without looking at the actual code that you are running. However, I can give you some general information.
1. READ using the BINARY SEARCH addition.
This is indeed a good way of doing a READ. But have you made sure that the internal table is sorted by the required fields before you use this statement ?
2. LOOP...WHERE statement.
This is also a good way to avoid looping through unnecessary entries. But further improvement can certainly be achieved if you use FIELD-SYMBOLS.
LOOP AT ITAB INTO <FIELD_SYMBOL_OF_THE_SAME_LINE-TYPE_AS_ITAB>.
ENDLOOP.
3. PERFORM statements.
A perform statement can not be optimized. what matters is the code that you write inside the FORM (or a subroutine).
4. COLLECT statements.
I trust you have used the COLLECT statement to simplify the logic. Let that be as it is. The code is more readable and elegant.
The COLLECT statement is somewhat performance intensive. It takes more time with a normal internal table (STANDARD). See if you can use an internal table of type SORTED. Even better, you can use a HASHED internal table.
5. DELETE itab.(delete duplicates staements too)
If you are making sure that you are deleting several entries based on a condition, then this should be okay. You cannot avoid using the DELETE statement if your functionality requires you to do so.
Also, before deleting the DUPLICATES, ensure that the internal table is sorted.
6. SORT statement.
It depends on how many entries there are in the internal table. If you are using most of the above points on the same internal table, then it is better that you define your internal table to be of type SORTED. That way, inserting entries will take a little more time (to ensure that the table is always sorted), but alll the other operations are going to be much faster.
Get back to me if you need further assistance.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

Clarification regarding clickToEdit table

Similar Messages

Maybe you are looking for