Clean way to De-register/De-commission the database with EBS from RAC/Cluster.

Hi,
We have a database with EBS on RAC. We are looking for Clean way to decommissioning the database from the cluster. We tried earlier, but when we again installed a fresh database on that server some how we had issues with the user oracle in cluster configuration files.
Early response is highly appreciated.
Thanks,
Rajashekar

Hi Hussein,
We have two node db and two node application server in a cluster environment.
We want to Remove/Decommission JUST DATABASE, APPLICATION related all files from the cluster. Cluster files should not be effected. After removing them we want install a fresh Db and Application on the same cluster.
Looking for any standard method for decommissioning.
Thanks,
Rajashekar

Similar Messages

Error while Registering the Database with Catalog..

I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!

Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

HT201342 Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Thx Winston,
I can count the send item. But let me try to explain why did I ask this question.
I had a trouble in sending e-mails from icloud on 22/2 and when I saw in my send item there were no emails.
But the mesgs to whom I emailed received and out of which only few of them didn't got the email. So I wanted to know the log abt the outflow of the mesg with subject and the receipants email id and the list with attachment or not.
How and where will I get the information apart from send item and draft mesg and the outflow undelivered?
Regards
Sarfaraz

Simplify recovery after opening the database with the RESETLOGS option

Hi All,
I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
*"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
Kindly correct me if i am wrong
Thanks in advance

vk82 wrote:
Hi All,
I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
*"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
Kindly correct me if i am wrong
Thanks in advanceyou are correct so you can mark this thread as answered
Handle:     vk82
Status Level:     Newbie (35)
Registered:     Nov 21, 2010
Total Posts:     733
Total Questions:     180 (115 unresolved)

DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           SAPLCLVF
Application Component CA-CL-CL
Date and Time          11.06.2014 12:08:28
Short text
     A table is unknown or does not exist.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCLVF" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A table is referred to in an SAP Open SQL statement that either does not
      exist or is unknown to the ABAP Data Dictionary.
     The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104     if dupl = kreuz.
105       insert auspc_v2 client specified from table auspcv2
106                              accepting duplicate keys.
107     else.
108       insert auspc_v2 client specified from table auspcv2.
109       if syst-subrc ne 0.
110         message a585 with tabausp.
111       endif.
112     endif.
113     refresh auspcv2.
114   endif.
115   read table auspcv3 index 1.
116   if syst-subrc = 0.
117     if dupl = kreuz.
118       insert auspc_v3 client specified from table auspcv3
119                              accepting duplicate keys.
120     else.
121       insert auspc_v3 client specified from table auspcv3.
122       if syst-subrc ne 0.
123         message a585 with tabausp.
124       endif.
125     endif.
126     refresh auspcv3.
127   endif.
128   read table auspnv1 index 1.
129   if syst-subrc = 0.
130     if dupl = kreuz.
131       insert auspn_v1 client specified from table auspnv1
132                              accepting duplicate keys.
133     else.
>>>>>       insert auspn_v1 client specified from table auspnv1.
135       if syst-subrc ne 0.
136         message a585 with tabausp.
137       endif.
138     endif.
139     refresh auspnv1.
140   endif.
141   read table auspnv2 index 1.
142   if syst-subrc = 0.
143     if dupl = kreuz.
144       insert auspn_v2 client specified from table auspnv2
145                              accepting duplicate keys.
146     else.
147       insert auspn_v2 client specified from table auspnv2.
148       if syst-subrc ne 0.
149         message a585 with tabausp.
150       endif.
151     endif.
152     refresh auspnv2.
153   endif.

Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

Can I use the database with as the ses as a regular database?

I write a application base on SES recently, and I need to store some data in the database. Can I use the the database with ses?
I can login using sqlplus login the database using the same pc as the ses installed, but I cannot login using sqldeveloper on other pc.
I set ORACLE_HOME equals SES_HOME
ORACLE_SID as ses

I have similar requirement to connect to the database.
I have removed those two lines from sqlnet.ora.
However, when I using tnsping, I got below error
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=SES.us.oracle.com))(ADDRESS=(PROTOCOL=TCP)(HOST=144.25.165.5)(PORT=1521)))
TNS-12541: TNS:no listener
anythings else that I need to do

Error when opening the database with resetlogs

ORA-00603: ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
WHEN I open the database with RESETLOGS

Well you definitely need to post more information here.
Looking at what you have posted, all that I can reply is
ORA-00603: ORACLE server session terminated by fatal error
Cause: An ORACLE server session is in an unrecoverable state.
Action: Login to ORACLE again so a new server session will be created

Application server cannot log onto the database with user PS.

Hello,
First of all, my setup is:
Microsoft Windows Server 2003
Oracle database 10g Rel. 2
Peopletools 8.49
HRMS 9.0
I am trying to boot the application server, but the operation fails with the error message:
PSAPPSRV.5796 (0) [08/27/09 10:29:41](1) GenMessageBox(0, 0, M): Database Signon: Invalid user ID or password for database signon. (id=PS)
I am able to sign on to the database with sqlplus and user PS.
Here is my config settings as shown on the psadmin screen:
Features Settings
========== ==========
1) Pub/Sub Servers : No 15) DBNAME :[hrdmo]
2) Quick Server : No 16) DBTYPE :[ORACLE]
3) Query Servers : No 17) UserId :[PS]
4) Jolt : Yes 18) UserPswd :[PS]
5) Jolt Relay : No 19) DomainID :[TESTSERV]
6) WSL : Yes 20) AddToPATH :[C:\oracle\product\10.2.0\database\bin]
7) PC Debugger : No 21) ConnectID :[people]
8) Event Notification: Yes 22) ConnectPswd:[peop1e]
9) MCF Servers : No 23) ServerName :[appserver]
10) Perf Collator : No 24) WSL Port :[7000]
11) Analytic Servers : Yes 25) JSL Port :[9000]
12) Domains Gateway : No 26) JRAD Port :[9100]
Here is the appsrv.log:
PSADMIN.2336 (0) [08/27/09 10:29:29](0) Begin boot attempt on domain hrdmo
PSWATCHSRV.5480 (0) [08/27/09 10:29:38] Checking process status every 120 seconds
PSWATCHSRV.5480 (0) [08/27/09 10:29:38] Server started
PSAPPSRV.5796 (0) [08/27/09 10:29:40](0) PeopleTools Release 8.49 (WinX86) starting
PSAPPSRV.5796 (0) [08/27/09 10:29:40](0) Cache Directory being used: C:\oracle\product\PT8.49\appserv\hrdmo\CACHE\PSAPPS
RV_2\
PSAPPSRV.5796 (0) [08/27/09 10:29:41](1) GenMessageBox(0, 0, M): Database Signon: Invalid user ID or password for databa
se signon. (id=PS)
PSAPPSRV.5796 (0) [08/27/09 10:29:41](0) Server failed to start
PSWATCHSRV.5480 (0) [08/27/09 10:29:42] Shutting down
PSADMIN.2336 (0) [08/27/09 10:29:48](0) End boot attempt on domain hrdmo
As I said, despite the error message, I am able to log on to the database with sqlplus with user PS password PS.
Could someone please help me with this problem? Thanks.

I installed the database with the setup program and come to think of it, I don't think you can specify whether to create a system or demo database. So I probably didn't install a demo, which is what I wanted. I also ran the SQRs and everything showed the database was correct, so I thought I did it right.
If I could install a demo with the setup program, I would do that because I think I could run through it pretty quickly having done it once. I've read in this forum and other places that it's much better to install the db manually, so maybe I'll just do that.
In any case, thanks for all you help Nicolas.

INS0009: Unable to connect to the database with user SYS

Hi all,
I'm trying to create an OWB repository with OWB repository assistant (10.2.0.2.) on a 10.2.0.1. database (windows XP platform). I get the following error every time I fill in the connect info for the SYS user:
INS0009: Unable to connect to the database with user SYS. java.sql.SQLException: ORA-01017: invalid username/password; logon denied
I can connect to the database (sqlplus sys/<password>@orcl as sysdba) and the OS user is in the ora_dba group. Also checked the database parameters remote_login_passwordfile (= EXCLUSIVE) and O7_DICTIONARY_ACCESSIBILITY=TRUE.
Does anyone know what the problem is? Any help is appreciated.
Regards,
Quinten

Ok I found the problem myself, I used the wrong sys password :-(. I thought the password I used to logon in sqlplus was right (sqlplus sys/<password>@orcl as sysdba) but the password doesn't matter when you logon as sysdba! So I altered the password for the user sys and now I can continue the steps of the repository assistant.
Quinten

I want to access the database with user name and password without con. info/udl

hi to all,
im doing project related with database... normally i'll connect ***.udl file to open database.vi.
now what is my question is I want to open the database with the user name with password.... y i need this because once i run the program the program should ask username and password to open database for write/read operation. if its wrong user name and password means program should be denied...
can any tell how to access the database toolkit with the username with password....
im using labview 7.0...
i think my question is clear....waiting for reply thank you in advance...
pls see this attachment.....
Regards,
N. Srinivasan
Attachments:
access.vi ‏37 KB

i have already read that link in the discussion forum...but im still have some confussion in... i attached file is so like to give user name and password..?
and one more things can tell wat to do in ODBC and MDB and in UDL for password lock.. each time i run the promgram it should ask password to acces the database..
thank you a lot for your reply..
it will be more more useful if u clear my doubts clearly....
Regards,
N. Srinivasan
Attachments:
user=pass.PNG ‏35 KB

Installing oracle application express from the database with oracle 11g

Hi,
I installed oracle 11g release 1 and trying to install oracle APEX from the database with Embedded PL/SQL gateway. The installation guide require grant connect privilege to any host for the APEX_030200 database user, but this schema does not exist in the database...
How to continue the installation of APEX ?

Thanks Hari,
But I need to enable network services in my database (oracle 11g).
Do I have to replace in the PL/SQL script below apex_030200 by flows_030000 ?
DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give APEX_030200
-- the "connect" privilege if APEX_030200 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, ensure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
-- ORA-44416: Invalid ACL: Unresolved principal 'APEX_030200'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_030200', 'connect') IS NULL THEN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,'APEX_030200', TRUE, 'connect');
END IF;
EXCEPTION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml','ACL that lets power users to connect to everywhere',
'APEX_030200', TRUE, 'connect');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END;
COMMIT;
Regards

The 'Replace with clip from Bin' command doesnt work... or freezes and crashes Premiere

I'm not exactly sure where I should begin on this issue... re-install?
Thx,
David

Yes, of course. And even if I hadn't, that wouldn't explain Premiere freezing
or crashing. Let me ask this. Is there a maximum amount of clips or some kind of RAM use tipping point where Premiere just can't handle anymore references? That is the only thing I can think of that would possibly cause this sudden glitch or some kind of coding error, like the 'replace with clip from bin' command can only handle 'x' file references somehow... I have about 300 AVCHD clips and 200 HD .mov files in the project panel. What do you think?

REUSE_ALV_GRID_DISPLAY - updating the database with new values

Hi,
I am using the function module 'REUSE_ALV_GRID_DISPLAY' to display records. I have managed to open a field for input/edit mode. Once this data has been changed , where will this data be? I have checked the internal table - no joy. I need to use this new/changed data to update the database with the new values.
Thanks,
Leanne

Hi,
The data is stored in table tab. After the changes the data does not reflect in table tab. Where can I get the data so that I can update my database?
I have coded the process as follows:
    when '&SUSPEND'.
      loop at tab
        where box = 'X'.
          update zzzz
            set status       = 'SP'
      endloop.
Regards,
Leanne

Comparing data in the database with the input text

hi there i have problem with the comparing data in the database with the input text. here is the piece of code of mine:
//declaration
datasourcedb.connect();
String stcode = req.getParameter("txtCode");
ResultSet rs = null;
String action = req.getParameter("action");
ResultSet portquery = null;
if (action.equals("SELL"))
-->portquery = datasourcedb.query("SELECT stockcode FROM portfolio where stockcode =\'"+ stcode + "\'");
-->portquery.next();
-->if((portquery.wasNull()) == true)
disp = req.getRequestDispatcher("error.jsp"); }
else */
Status = "Sell";
datasourcedb.close();
with the code that i marked with --> it doesnt work since i have to compare the input text stcode with stockcode in the db. could anyone tell me how to compare it?
regards
virginia

i have try to change into this code:
if (action.equals("SELL"))
portquery = datasourcedb.query("SELECT distinct stockcode FROM portfolio where stockcode =\'"+ stcode + "\' + and userName = \'"+ user + "\'");
if(portquery.next()) {
Status = "Sell";}
else {
disp = req.getRequestDispatcher("error.jsp");
but so far the coding doesnt give any result.... could anyone help me? since the coding does not reach status n the disp

Clean way to De-register/De-commission the database with EBS from RAC/Cluster.

Similar Messages

Maybe you are looking for