Click the Next button or Click the Next arrow to continue?

Click the Next button or Click the Next arrow to continue. Which statement do you use and why?

I like that idea with the line.  sometimes what I'll do in CP, is have the button appear and then have a glow affect hit it, like you said to draw the eye.  if it's text or narration I might use 'click to continue' or 'click when you're ready to continue' especially if they're going to an outside resource or reviewing some information on screen which some may take more time than others.  Mostly, that's just a cue to them to take as much time as they want.  Not to say they DO, but I try.
That said, sometimes a client will say "it didn't tell me to click to continue."  which i always find.. not frustrating.. but something along those lines.
Ten years ago I could imagine not knowing what to do, but I shouldn't 1) have to put "NEXT" on a button for you to know what to do if it has an arrow, or 2) tell you to click it on every slide.  The right/left arrows are so ubiquitous in technology and web now, I can't imagine people with appropriate background (understanding less tech-savvy audiences may not) wouldn't know what they should do.  And hey, if they have to click them to see what they do, that's all good too.  Proper implementation of the Gutenberg diagram should be enough for most learners.
All just my opinion of course.  I'm curious what others have to say.

Similar Messages

  • I have my username, password, and sync key but I cannot click the next button to complete the sync setup?! Neither the next button nor the cancel button press?!

    I try to setup my sync account with Ubuntu 13.10 and I am able to enter my user name and password and recovery key but the next button will not click and neither will the cancel button. Only the back button, sync options button, and the x at the top of the screen are functioning?

    Did you enable the Side Bar?
    Select "Show Side Bar" from the "View" menu of iTunes.

  • Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

    Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

    Jeannine,
         If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
    Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
    Location of LR Preset folder in Windows Vista/ Windows 7
    C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
    If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
    Hope this helps a bit,
    Glenn

  • When click on the submit button i got the below error.

    Hi Gurus,
    i am very new to oaf.
    i am trying to insert data into database tables.
    so i am entering the data and click on the submit button i got the below error in createPG rightside the top
    Error while creating a new entity row for NewManagerCustomTableEO
    Plz help me
    thanks
    latha.

    Hi,
    Please provide the code that u r using..
    Thanks
    Raghav.

  • Need to show popup when the Submit button is clicked for the second time ..

    Hi guys,
    I have a requirement where i need to show a popup or alert when the submit button is clicked twice . When it is clicked for the first time one method is been called and its process starts. When the user clicks the submit button for the second time they should be shown a popup stating "Submit button already been clicked, please clicked OK to continue".
    Can anyone help with this please , its really urgent requirement ?
    Thanks in advance

    Hi,
    I dont have any sample code to give you now. For quick reference, I can advice some psuedo steps to achieve your requirement. I dont have access to JDEV to test this. If any syntax errors then pls correct yourself.
    1. Extend Controller since it is standard page ( Refer Anil Passi site for steps to extend seeded ontroller)
    2. Write below logic in your Process Request method
    super.processRequest(oaPageContext, oaWebBean);
    pageContext.putSessionValue("status", "notInitiated");
    3. Include below logic in your PFR method
    if(pageContext.getSessionValue("status")!=null){
    if("notInitiated".equals(pageContext.getSessionValue("status")))
    super.processFormRequest(oapagecontext, oawebbean);
    pageContext.putSessionValue("status", "initiated");
    else
    String message = "Display error message as required";
    throw new OAException(message, OAException.ERROR);
    You may need to import required packages ( Related to OAException).
    Remeber, to sumbit the request, user need to refresh the page again so that "status" variable will be refreshed.
    Hope it helps.
    Thanks
    venkat

  • HT4483 After clicking the download button, I received the message, 'The item you've requested is not currently available in the U.S. store.

    After clicking the download button, I received the message, 'The item you've requested is not currently available in the U.S. store.

    This is not uncommon.   Not all apps are available in all stores, just as not all OSx apps are available in IOS.    The reasons are many, commercial, legal, copyright, whatever but it won't change your position.   If it says not available, then that is the situation.

  • HT201371 does touching the home button wakes up the iPhone 5s or do we physically have to Click on Home Button or Sleep/Wake button and then use touch id?

    does touching the home button wakes up the iphone 5S or do we physically have to Click on Home Button or Sleep/Wake button and then use touch id?
    What I am trying to say is that each time I have to click on the home button to wake up the iphone 5s and then it scans my print and logs me in the phone however I was hoping that by just putting the finger on the button will do the whole thing of waking up + unlocking the phone,
    Can anyone please let me know if I am wrong or if I am right? since I just bought iphone 5s and I am not sure if the sensor is working or not the way it should be.

    It sounds like it is working the way it should be. You do have to click one of the two buttons. The closest thing to doing it as a single operation is to click the Home button but don't remove your finger from the button (i.e., leave your finger lightly on the button immediately after clicking it).

  • Course will not play in LMS until the Exit button is clicked

    I'm stumped.  I've created a course that plays fine until I enable reporting in our LMS.  This is the first course we've created in Captivate 5, and I'm using the same Quiz Reporting settings that we used in Captivate 4 (that always worked).  If the course is published to the LMS without quiz reporting enabled, the course plays fine.
    However, if the course is published to the LMS with Quiz Reporting enabled, then the course freezes on the first slide, and will not play until the Exit Button in the playback controls is clicked.  All of the other buttons cease to function until the exit button is clicked as well.
    Any ideas on what could be causing this?

    Just a quick update... I was able to resolve our issue.
    (in case anybody else runs into this issue, maybe this will help)
    We were using AICC to report back to our LMS (Saba) and it's always caused various kinds of problems with Captivate v4.  We were using some sort of work around to get the reporting to work properly.  I was trying to use the same work around we used in v4 with v5, which (I'm totally guessing here) was what was causing the problem.
    Instead of using AICC, I uploaded a SCORM package to our LMS, and everythings been working great since.

  • When I click the Sections button then click on the 1st page I get  a page that is titled "Lorem ipsum dolor sit amet"! Where did it come from and how do I get rid of it. I have tried deleting and "dont save" but it comes back.

    In Pages when I click the 'Sections'  button then click on the 1st page I get  a page that is titled "Lorem ipsum dolor sit amet"!  Where did it come from and how do I get rid of it? I have tried deleting and "dont save" but it comes back. It is a full page in some unknown language. The only thing I can decifer is 'cupy uf cak'.   Rdal

    Roger,
    The icon is +Sections, not just Sections, as in "Add a Section". When you click that icon you get a section break and and a new section template, complete with preformatted text called placeholder text. The reason "Lorem ipsum" is there is so you can see what the format looks like. The reason that it is Latin gibberish is so you won't get hung up on, or distracted by, what it says. It's just a display of format. Select the "Lorem ipsum" text and start typing your content.
    Jerry

  • When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

  • I have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but no

    i have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but not from the actual device

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT5192 After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

    After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

    I just updated--my Camera is a disaster.  Yes, I know how to turn (and position) the Camera now. However, every photo I take is UPSIDE DOWN in the Camera Roll OR Photo Stream.  Even worse, a number of my Apps (Weather Underground, for example) are ALSO now upside down.  Has anyone here experienced these serious orientation problems after this update?  I've read the 'Manual' and its as if it doesn't exist.  However, if I leave the Apple site, customer complaints about orientation abound...
    This is my first time posting here about an issue (well, the same issue - I posted last week about the Camera, and no one responded).  Any advice at all about how to get this corrected is much appreciated!
    Thank you!
    Lisa

  • Why doesn't the "back" button work all the time in Safari?

    Why doesn't the "back" button work all the time in Safari?

    thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
    My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
    Thank you

  • How do I close a running .vit using the X button without getting the save VI dialog?

    One solution is to save the running .vit instance to disk before the operator is able to use the X button to close the running VI. This is awkward as I don't need another numerically named copy of the .vit on my disk. Adding a "Quit" button to my .vit front panel is also an option but it would be nice to be able to use the X button instead.

    If you have LabVIEW 6.1 or higher, you can use the Event Structure to capture the click of the 'X' button, and choose to ignore it and close the panel.
    Configure an Event Case to "This VI..Panel Close?" filter event. (note the question mark) On the right side of this new case, there will be a boolean terminal that will let you discard the event. Open a reference to the VIT and pass this out of the main loop, and use a property node on this reference to close the front panel, then close the reference.
    It will go away when you hit the 'X' without prompting to save.
    A simple example is attached. You'll either need ot make a change or copy everything to a new VI and run that to prove it doesn't prompt for saving changes. This is in 7.1, Let me know if you need it in an earlier version.
    EdMessage Edited by Ed Dickens on 03-03-2005 12:58 PM
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
    Attachments:
    Close without Save Prompt.vi ‏25 KB

  • How to keep the save-button active all the time?

    Hi!
    I'm using mobile sales 4.0.
    On a tile i've only fixed questions and combo boxes with yes and no ...
    When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
    What are the settings i've to do to keep the save-button active all the time?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi Ingo,
    If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
    In the <b>combobox_OnValueChanged2</b> event, make a call to makeDirty method in the tile:
    If boundAttributeChanged Then
         <b>anchorthatyourcombotiedto</b>.bo.MakeDirty True
    End If
    This will make the Save button enabled.
    Regards, Vadim.

Maybe you are looking for