Client printer on oracle application server

Hi all.
I configured my own system on oracle application server and I connected my printer on client machine.
When I wanted to print through the application server on the printer I did not print.
Please could anyone shows me where is the error file (for the printer) located in oracle application server to check the error.
by

No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
cheers

Similar Messages

Print in Oracle Application Server

Hi
I installed the Oracle Application Server Forms and Reports Services in Windows 2003 server, cut all fmx.plx ...., created the shortcut
http://10.1.1.60:7778/forms/frmservlet?config=cof&form=cof0001.fmx in the server system works all, copy the same shortcut to a station (client), when I print the error "FRM-41213 is not possible to connect to the server repserver the report", what should I do?
att
Marcos

Ragesh
http://10.1.1.60:7778/forms/frmservlet?, ok
http://10.1.1.60:7778/forms/frmservlet?config=cof&form=cof0001.fmx ok
http://10.1.1.60:7778/reports/rwservlet/showjobs?server=<Enter Rep Server Name>, ok too
See status job
Closed with error: REP-110: Can not open file 'COF2002.rep'. REP-1070: Error during the opening and recording of a document. REP-0110: Unable to open file 'COF2002.rep'
The COF2002.rep is in the directory fmxs, (configured FORMS_PATH in file defaut.env)
att
Marcos

ACCENT Symbol in Oracle Reports printing using 10g Application server

Some of the report with names containing ACCENT symbol are printing like upside-down comma. But the report used to printing certified copy and the client requiring to print the ACCENT symbol as it is. Oracle support recommend us to use PDFPrint destination, which is third-party utility that converting the post-script output to printer for ACCENT symbol. Please provide the link and instruction to download the PDFprint utility and installation requirement for the below environment:
Oracle Application Server Version=10.1.2.3.0
SUN SPARC - 64 bit
Thanks
Krishna

By the looks of it you used 9i which also used an Application Server so your knowledge should be up to date. The Default URL has changed a little as has the port. Look in the installation guide for the default URL and port.
If you mena the development side you can use the one-button-run functionality which makes it possible to run am form without the full App Server just by hitting the run button in the builder. You do need to start the local OC4J but that is easy. On Windows there is a start menu item to do that. On Linux you run a shell script I think.

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

How to create client stub while deployign EAR on Oracle Application Server

Hi,
I have deployed an EJB on Oracle Application Server 10g 10.1.2.0.2. And i want to call this ejb from other app server using ejb client. For that i need client stub.
Is there any way I can create client stub while deploying EJB on the OC4J?
I am sure there will be some options.
Thanks and Regards
AT

Amit,
It depends on which transport protocol you use to transmit both the client requests and the server responses: either IIOP or ORMI.
Here's how it works: if you've chosen the IIOP protocol, the client stubs are generated at deploy time and stored in the iiopClient.jar file. Once created, you append this file to your java client's classpath.
Now, if your choice is ORMI, the client stubs are created on demand by the container, so there is no need to append any jar file to the client classpath.
Consult the OC4J Services Guide in the Official Oracle Application Server docs for further inforrmation on this topic, specially the "Remote Method Invocation" chapter.
RB

Unale to print pdf files in oracle application server using oracle forms

Hi
We are using oracle developer suite 10g(10.1.2.3.0) in Windows vista. (test environment)
Oracle application server 10g(10.1.2.3.0) in Hp-UX 11iv3 (production environment)
We are able to print pdf files in test environment from oracle forms using the below command:
host('/usr/bin/lp -d p9775hplaser '||'/ashome/output/'||:print_file);
But while declaring to the live environment it is not working
host('cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser');
but when the above command is put in hp-ux cmd prompt it is workinh"'cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser'";
Kind ly tell me whether the problem i with the host command and some other command is available for printing files from forms.

Here is my guess:
declare
AppID PLS_INTEGER;
begin
AppID := DDE.App_Begin('acroread -toPostScript '||file name,DDE.APP_MODE_MINIMIZED);
end;

Share JVM on the client using ORACLE Forms on Oracle Application Server 10x

Hi All,
excuse the question, if it's wrong here:
We have a problem running an Oracle Forms Application on an Oracle Application Server 10.1.2.3
Local requirements do not allow multiple JVMs to run on the Client where the Oracle Forms Application is shown.
Is there any neat way to prevent Multiple Instances of a Forms Application to each run a JVM on the client ?
(Issue shows up on windows xp, iexplorer 8, ...)
Any help much appreciated.

Rephrasing...
You have a web server - Oracle Forms.
You want to prevent a user, which is accessing the web server, from opening more than one instance of IE (accessing the web server twice.)
I would suspect that the answer requires support from the web server. And if that is the answer then this becomes a specific question about Oracle Forms (and not a general one about java.)

Implementing client-cert auth in web.xml in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

Hello,
You have different level of integration of SSO services in OC4J 10g (10.1.3).
If you are using an LDAP server you can integrate that using the LDAP security provider and support SSO between applications. This is documented as part of the Identity Management Integration.
Also in 10.1.3.0.0 you need to have at least an LDAP server (or bigger identity management solution) to do SSO.
In 10.1.3.1.0, that should be available this summer, OC4J will have a new security service that will allow applications to be authenticated in a single sing-on fashion. (Stay tuned to the OTN forum we will publish a beta version very soon)
Regards
Tugdual Grall

ORARRP 1.3.4/Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP on IE7

We have to use JInitiator 1.3.1.13 and ORARRP 1.3.4 on a MsWindows Client to connect to the HQ Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server.
We have noticed this will run almost 100% in MSInternet Explorer version 7.0.5730.11 .
Except for the ORARRP remote print utility which seems to have some timing problem i.e. when generating a report in the browser screen a temporary browser screen will open and close immediately again. Using the advanced debug option in orarrp.ini to monitor any errors does not show any problem.
However when clicking quickly in the temporary browser screen the Printer selection screen will pop-up and the local printer can be selected to print-out the report.
PDF-reports to screen work normally with IE7. ORARRP will start Adobe Acrobat reader (version 8.1.0).
Has someone solved this issue with local printing using ORARRP on IE7?
We would like to deploy IE7 asap because of its better features and rendering than IE6.
thanks in advance,
Fred

Move your thread to "Reports" forum, you will probably get a better response:
Reports

Starting Oracle Application Server as a particular user under windows

Hi All,
I am wondering if there is any way of starting the Oracle Application Server with a users default operating system environment variables set.
The reason I ask this, is that we have deployed a webapp which contains a piece of software which needs to be run on the command line for generating reports using the reports 6i client (rwcli60). We have had issues with this in regards to the application not finding a proper service under Oracle Application Server.
Our company then had to revert going back to a Apache/Tomcat setting and deploying the same web app on the tomcat server. Originally we were getting the same error. As a consequence we decided to change the user who runs tomcat as the same user who runs the oracle reports 6i server. This worked.
Also of note is that when this was done, the tomcat server has ALL the environment settings as the os user. This can easily be seen by using the Runtime.exec("cmd /c set") command and printing its outputs. However executing the same command withan Oracle App Server results in a dramatically reduced environment to the logged in user who started the app server.
Any help would be most helpful.
Cheers
Rodney

Hi All,
From much research and experimenting to get this to work I looked at the java.lang.Runtime class and noticed that seperate processes can be started using this very important Java class.
The first thing that I experimented with was in regards to seeing the environment OC4J runs against. Using the java.lang.Runtime class I executed a standard "cmd /c set" command in my Windows environment, and noticed that Oracle Application Server uses its own environment and not a standard windows login environment for its OC4J containers. Apache Tomcat on the other hand uses the standard user login environment.
So to get the application to be able to work properly we needed to override the particular environment the process needed to be able to get it to work. There is a exec command which allows you to override completely the environment for a process you would like to run. This method call does not in any way shape or form change the standard OC4J environment. This was done by executing the same "set" but with the overriden environment. Note that no environment variables from the OC4J container are carried into this new environment.
Cheers
Rodney

Developing for a Oracle Application Server with SSO

Hello there,
I'm developing an application (Java) that will be deployed as a partner application within an Oracle Application Server 10g at my client. This Oracle instance has a SSO already configured, and my app will use this Identity Manager (consuming the cookie). The problem is that at my company we don't have a SSO system configured, not even an Oracle Application Server, just a simple Oracle XE 10g to hold data. So I'm wondering how can I do to develop my application and test it.
I was looking forward to install an OAS and configure an SSO to validate my implementation, but the download link provided by Oracle is broken (http://www.oracle.com/technology/products/ias/index.html). Another alternative that I thought of was to install an OC4J and configure a Java SSO to simulate the behavior of OSSO, and make my app the cookie set by it. But OC4J supports only til Servlet 2.4 and my app is using 2.5...
And to complete, I cannot access my client's environment. I'm supposed to write a Deploying document telling him how to deploy my app and then try to access it through Internet.
Does anyone have an idea of how can I develop and test my app in my company's environment?
Thanks in advance,
Bruno Krebs.

Apache 2.0 based OHS is located in Oracle Application Server Companion CD.
Pavna

How to install Oracle Report Services in Oracle Application Server 10.1.3.1

My project is running on Oracle Application Server(OAS) 10.1.3.1, and I need to develop some Oracle Reports for my client.
But I find out there is not "Oracle Report Services" component in OAS 10.1.3.1 like OAS 10.1.2.
Is there Oracle Report Services for OAS 10.1.3.1? How to get it?

Max Yuan wrote:
You mean I need to install 2 OAS(10.1.2 for report, 10.1.3 for my project), or deploy my project to 11g? For the Reports reporting project, you'll need a version/edition that includes AS Reports Services.
In "10gr2" that means AS 10.1.2.0.2 (plus Patch set): AS Infrastructure + AS BI&Forms installation (enterprise edition) or the standalone Forms and Reports installation (EE or separate licensing). You also need the Developer Suit (Reports Builder). OFM "11gr1" suite has some version of Reports Services but I don't know the available packages and installation types.

Oracle application server 10g help

Hi,
I need to work on a project that pulls data from the oracle database and should be able to generate reports based on user entered criteria and they want me to use the oracle application server 10g.
(I also need to do manipulations on the data pulled out.)
How do i start and what are the things that i need to install..
If somebody could guide me in a few words, i can pick it up from there...
Thanks

Hi,
Thanks a lot for replying..
This is a simple overview of my project..
Basically i need to convert a client server application which was initially in Access (and coded in VBA) and oracle to oracle based web application.
The application that was built in access has various flaws and hence we decided to rewrite them with lot of new features..
what i would need is several web pages(probably intranet based...) where i pull data from the oracle db, and then do manipulations on them and then based on certain criteria come up with a report based on users needs...
I hope this info is enough to guide me
Thanks.

Problem while configuring webutil on oracle application server 10g(9.0.4)

hi,
I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
and successfully compiled and attached webutil library.then i subclass
webutil object group from webutil.olb into my form,that is also
subclassed successfully.Form has also been compiled and saved
successfully.
also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
{color:#993366}Now when i run this form from client, it does not show form in the
browser and shows a message on the client browser console as follows{color}.
{color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
{color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
{color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
Note:In the browser ,loading java applet is also visible.
how should i resolve this problem?
any suggestion?
Its urgent.
Regards,
abbasyazdani

Refer this metalink note,
566628.1 How To Install Webutil on 10g Oracle AS
[email protected]

Deploying Jave portlet on Oracle Application Server 10g

I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal.
But when i deploy my application (just a test thing), from the deployment tab I get:
---- Deployment started. ---- 22-Mar-2005 14:11:27
Target platform is Oracle Application Server 10g (hotseatConnection).
Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c253297271317c3f930003c405ea91ff598582f0be0
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 1 minute, 45 seconds
---- Deployment finished. ---- 22-Mar-2005 14:13:12
My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
Many thanks
P/S
I have tried:
http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

Hi FormsEleven,
When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
Or how the url to access these forms will be?
As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
- Hosting Directory (formsweb.cfg entry)
- Sub Directory1
      - Form1
      - Form2
- Sub Directory2
      - Form1
      - Form4
- Sub Directory3
      - Form5
      - Form6

Client printer on oracle application server

Similar Messages

Maybe you are looking for