Clipboard_import problem with separator

Hello specialists,
I am using the FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' with little modification to read Data from an Excel-Sheet.
Everything was working fine but then the users where begining to put texts into Excel-Fileds with <ALT>>ENTER> in it, "because it is looking better" .
Now the FB 'CLPB_IMPORT' stopps getting Field-Data at tis point <ALT>>ENTER>,
OK no problem I am using now
CALL METHOD cl_gui_frontend_services=>clipboard_import
and receiving all Excel data.
But now I am getting a SPACE as separator between the Excel fields.
Tha is bad because there are fields with text AND SPACE between the words of course.
I have no idea what to do.
System is 46C Support Package 40 and GUI is 620/55
Regards Wolfgang

Hi
This method is to import raw data, so obviously it'll not help you.
Your user may need to put some extra effort in that case.
Either whenever he wants to export he needs to create a file with a delimiter and export that file you can control the delimiter file in your program or he needs to end every cell with a specific special character.
Some other alternatives are also there.
But whatever be the alternative some extra effor is required.
Regards
Surya.

Similar Messages

Problem with thousands and decimal separator (Excel 2000)

Hi, i have a problem with the download option to excel 2000.
When downloading numbers over 1000 the thousands separators change in decimal separators.
My config is:
Locale (location): Español - España
User Interface Language: Español
For example, if I have a value as 1800:
1) in OBIEE show "1.800" (ok)
2) in Excel 2000 show "1,8" (bad)
If i choose Locale (location): English - United Stated and
User interface language Español.
1) in OBIEE show "1,800" (bad)
2) in Excel 2000 show "1.800" (ok)
Can someone help me solve my problem?
I need to show the same result in OBIEE and Excel, that is, "1.800" with "." not with ",".
Thanks

Hi,
The thousands separator change in the backend dind't work. (+ it only works for text input fields, not for text fields)
Anyhow, this is how we created a workaround :
Suppose we did this : <b>NSTR(@CREDITLIMIT,"C.2")</b>
This resulted in the field being displayed as <i>67,234.56</i>
The 'dirty' way to convert this to an european format is :
<b>REPLACE(REPLACE(REPLACE(NSTR(@CREDITLIMIT,"C.2"),",",";"),".",","),";",".")</b>
Output is <i>67.234,56</i>
(we just replaced the '.' by ',' and vice versa)
I still feel quite uncomfortable with this solution, but this is the only way we got it to work.
I really hope a next patch/servivepack provided a more elegant solution for this problem... (hint hint)

Has anyone else had a screen separation problem with the ipad?

Has anyone else had a screen separation problem with the ipad?

Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards.

Problem with thousands separator

Hi,
I'am working on dunning letters print and i've a problem with the thousands separator.
Data is stored in a table field typed CURR. The intern format is 119600,60
When i print directly this value on my SmartForm, there are many blanks before the number, corresponding to the size of the variable (15 caracters). I don't know hax to remove this blanks.
I tried to change the type of the variable by moving the value into a CHAR variable. The result is better : the blanks have been cleared out but unfortunatelly, the thousands seperators too.
Does someone know how to put the value of a variable typed CURR in a string or a char variable with thousands separators ?
To sum up my query :
The CURR variable contains 119600,60
I want a String or a char variable containing 119 600,00
Thanks a lot
regards
Edited by: Larrière Dorian on Jun 19, 2008 11:53 AM

Hi...
write : wf_cu LEFT-JUSTIFIED.
This state ment removes the blanks at the beginning....
The wf_cu may be of curr type
Edited by: Rudra Prasanna Mohapatra on Jun 19, 2008 12:08 PM

Problem with decimals and grouping characters in Java 6

I'm having problems with locales in Java 6.
I have the following code:
NumberFormat format = NumberFormat.getInstance(new Locale("es", "CO", "Traditional_WIN"));
BigDecimal number = new BigDecimal("123456");
System.out.println(format.format(number));If I run it with Java 5, I get 123,456 which is OK, and is excatly the output I would expect.
If I run it with Java 6, I get 123.456 Why am I getting a different output?
Am I doing something wrong?

change the separator symbol, something like:
DecimalFormat format = (DecimalFormat)NumberFormat.getInstance(new Locale("es", "CO", "Traditional_WIN"));
BigDecimal number = new BigDecimal("123456");
DecimalFormatSymbols dfs = format.getDecimalFormatSymbols();
dfs.setGroupingSeparator( ',' );
format.setDecimalFormatSymbols( dfs );
System.out.println(format.format(number));regards;

Java Webstart application problem with TLS certificate revocation checks (Java 1.7.0_76)

We have a problem with our Java Web Start Application regarding the TLS certificate revocation check:
The application is running on a server within a wide area network which is separated from the internet.
The application users have access to the WAN, and also access to the internet over some corporate proxy/firewall.
The user has to enter, for example "https://my-site.de/myapp/ma.jnlp" within a webbrowser or could also call "javaws https://my-site.de/myapp/ma.jnlp" to start the application client.
The webserver has a certificate from a trusted certificate authority. This certificate seems to be ok, the browser is even configured to perform OCSP status check.
The application files are signed with a certificate from another trusted certificate authority. This certificate seems also to be ok. Regarding this certificate there
are no problems with certificate revocation checks.
The problem is, while starting the application client there is a message box which tell us something like "the connection to this website ist not trustworthy",
"Website: https://my-site.de:80", and something about an invalid certificate, meaning the webserver certificate.
Obviously the jvm runtime, which is executed on the users workstation, tries to perform a revocation check for the webservers certificate, but this fails because
it cannot fetch the certificate under https://my-site.de:80.
The application will execute without further problems after that message but the users are very concerned about the "invalid" certificate, so here are my questions:
- Why is the application trying to get the webserver certificate over Port 80. Our application developers told me, there is no corresponding statement. Calling this address
has to fail while "https://my-site.de:443" or "https://my-site.de" would not have a problem.
- Is there a way to make the application go on without performing a tls revocation check? I mean, by adjusting the application sourcecode and not by configuring the users Java Control Panel.
While disabling the TLS Certificate Revocation check in the Java Control Panel, the Webstart Application executes without a warning message, but this is not a workable solution for
our users.
It would be great if someone can help me with a hint so i can send our developers into the right direction;-)
Many thanks!
This is a part from a java console output after calling "javaws -verbose https://my-site.de/myapp/"
(sorry for this is in german... and also my english above)
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
security: OCSP Response: GOOD
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
security: UNAUTHORIZED
security: Failing over to CRLs: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
network: Cacheeintrag gefunden [URL: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl, Version: null] prevalidated=false/0
cache: Adding MemoryCache entry: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl
cache: Resource http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl has expired.
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: ResponseCode für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: 200
network: Codierung für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: null
network: Verbindung mit http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl trennen
CacheEntry[http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl]: updateAvailable=true,lastModified=Tue Mar 24 10:50:01 CET 2015,length=53241
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird
network: Verbindung von socket://ldap.serverpass.telesec.de:389 mit Proxy=DIRECT wird hergestellt
security: Revocation Status Unknown
com.sun.deploy.security.RevocationChecker$StatusUnknownException: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    at com.sun.deploy.security.RevocationChecker.checkOCSP(Unknown Source)
    at com.sun.deploy.security.RevocationChecker.check(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.checkRevocationStatus(Unknown Source)
    at com.sun.deploy.security.X509TrustManagerDelegate.checkTrusted(Unknown Source)
    at com.sun.deploy.security.X509Extended7DeployTrustManagerDelegate.checkServerTrusted(Unknown Source)
    at com.sun.deploy.security.X509Extended7DeployTrustManager.checkServerTrusted(Unknown Source)
    at sun.security.ssl.ClientHandshaker.serverCertificate(Unknown Source)
    at sun.security.ssl.ClientHandshaker.processMessage(Unknown Source)
    at sun.security.ssl.Handshaker.processLoop(Unknown Source)
    at sun.security.ssl.Handshaker.process_record(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
    at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
    at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
    at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
    at com.sun.deploy.model.ResourceProvider.getResource(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory._buildDescriptor(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.Main.launchApp(Unknown Source)
    at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
    at com.sun.javaws.Main.access$000(Unknown Source)
    at com.sun.javaws.Main$1.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Suppressed: com.sun.deploy.security.RevocationChecker$StatusUnknownException
        at com.sun.deploy.security.RevocationChecker.checkCRLs(Unknown Source)
        ... 35 more
Caused by: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    ... 36 more
security: Ungültiges Zertifikat vom HTTPS-Server
network: Cacheeintrag nicht gefunden [URL: https://my-site.de:80, Version: null]

Add the JSF Jars to the WEB-INF/lib directory of the application. If still getting error add to the CLASSPATH variable in the startWebLogic script in the domain/bin directory.

Problem with focus and selecting text in jtextfield

I have problem with jtexfield. I know that solution will be very simple but I can't figure it out.
This is simplified version of situation:
I have a jframe, jtextfield and jbutton. User can put numbers (0-10000) separated with commas to textfield and save those numbers by pressing jbutton.
When jbutton is pressed I have a validator which checks that jtextfield contains only numbers and commas. If validator sees that there are invalid characters, a messagebox is launched which tells to user whats wrong.
Now comes the tricky part.
When user presses ok from messagebox, jtextfield should select the character which validator said was invalid so that user can replace it by pressing a number or comma.
I have the invalid character, but how can you get the focus to jtextfield and select only the character which was invalid?
I tried requestFocus(), but it selected whole text in jtextfield and after that command I couldn't set selected text. I tried with commands setSelectionStart(int), setSelectionEnd(int) and select(int,int).
Then I tried to use Caret and select text with that. It selected the character I wanted, but the focus wasn't really there because it didn't have keyFocus (or something like that).
Is there a simple way of doing this?

textField.requestFocusInWindow();
textField.select(...);The above should work, although read the API on the select(...) method for the newer recommended approach on how to do selection.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Problem with axis2 and Tomcat

Hello,
I am having a strange problem with Tomcat and axis. I have a webservice that uses axis2 for wsdl2java class generation. When I compile my project in maven a Test is performed. During the test a glassfish server is established and the project is deployed -everything work great with the expected results. However when I try to deploy the webservice on tomcat it has some problems.
At first I tried to call axis code in a POST method that takes a MultiPart message. The code is as below:
*@Path("identifyWavestream")*
*@POST*
*@Consumes(MediaType.MULTIPART_FORM_DATA)*
*@Produces(MediaType.APPLICATION_XML)*
*public String multipartTest(com.sun.jersey.multipart.MultiPart multiPart) throws Exception {*
*// get first body part (index 0)*
*//tomcat shows that the first error is here (line 122 is the nest one with bodypart)*
BodyPart bp = multiPart.getBodyParts().get(0);
BodyPartEntity bodyPartEntity = (BodyPartEntity) bp.getEntity();
InputStream stream = bodyPartEntity.getInputStream();
*//the rest of the code either saves the incoming file or implements the wsdl2java axis interface - neither works.*
And the tomcat error is:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
java.util.ArrayList.RangeCheck(Unknown Source)
java.util.ArrayList.get(Unknown Source)
com.webserv.rest.resources.SearchResource.test.multipartTest(SearchResource.java:122)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
It was strange to me since this simple approach of handling a Multipart method worked for me earlier. Then I decided skip the handling of multipart method and just call the axis code. But the results also caused an error. I then tried to call the axis code in a simple @GET method (to cross out any issues regarding the multipart) and the result where the same. Again everything works on the maven- glassfish test. In this case the tomcat error is the following:
javax.servlet.ServletException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:361)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
root cause
com.sun.jersey.api.container.MappableContainerException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:74)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
root cause
java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
org.apache.axis2.transport.http.AbstractHTTPSender.initializeTimeouts(AbstractHTTPSender.java:454)
org.apache.axis2.transport.http.AbstractHTTPSender.getHttpClient(AbstractHTTPSender.java:514)
org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:156)
org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:371)
org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:209)
org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:448)
org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:401)
org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
com.webserv.rest.webapp.IntSoapServiceStub.getServerData(IntSoapServiceStub.java:2447)
com.webserv..rest.resources.AIntSoapImpl.getServerData(AIntSoapImpl.java:112)
com.webserv..rest.resources.SearchResource.test.pingTest(SearchResource.java:167)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
I think it is also a good ide to post the pom.xml file :
Edited by: 803864 on 2010-10-21 00:30

I think it is also a good ide to post the pom.xml file:
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"+
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
+<modelVersion>4.0.0</modelVersion>+
+<groupId>com.myProjects</groupId>+
+<artifactId>audioid-rest-interface</artifactId>+
+<packaging>war</packaging>+
+<name>AudioID Rest Interface</name>+
+<version>0.1</version>+
+<dependencies>+
++
+<dependency>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>jersey-multipart</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-client</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-bundle</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>commons-logging</groupId>+
+<artifactId>commons-logging</artifactId>+
+<version>1.0.4</version>+
+</dependency>+
+<dependency>+
+<groupId>commons-collections</groupId>+
+<artifactId>commons-collections</artifactId>+
+<version>3.1</version>+
+</dependency>+
+<dependency>+
+<groupId>org.slf4j</groupId>+
+<artifactId>slf4j-log4j12</artifactId>+
+<version>1.5.6</version>+
+</dependency>+
+<dependency>+
+<groupId>junit</groupId>+
+<artifactId>junit</artifactId>+
+<version>3.8.2</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.glassfish.distributions</groupId>+
+<artifactId>web-all</artifactId>+
+<version>10.0-build-20080430</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.glassfish.embedded</groupId>+
+<artifactId>gf-embedded-api</artifactId>+
+<version>1.0-alpha-4</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+</dependency>+
+<dependency>+
+<groupId>org.hibernate</groupId>+
+<artifactId>hibernate</artifactId>+
+<version>3.2.5.ga</version>+
+<exclusions>+
+<exclusion>+
+<groupId>javax.transaction</groupId>+
+<artifactId>jta</artifactId>+
+</exclusion>+
+<exclusion>+
+<groupId>cglib</groupId>+
+<artifactId>cglib</artifactId>+
+</exclusion>+
+</exclusions>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2</artifactId>+
+<version>1.4.1</version>+
+</dependency>+
++
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-aar-maven-plugin</artifactId>+
+<version>1.4.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-java2wsdl</artifactId>+
+<version>1.4.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-xmlbeans</artifactId>+
+<version>1.4.1</version>+
+</dependency>+
++
+<dependency>+
+<groupId>com.sun.xml.bind</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1.12</version>+
+</dependency>+
+<dependency>+
+<groupId>cglib</groupId>+
+<artifactId>cglib-nodep</artifactId>+
+<version>2.1_3</version>+
+</dependency>+
+</dependencies>+
+<build>+
+<finalName>audioid-rest-interface</finalName>+
+<plugins>+
+<plugin>+
++
++
+<groupId>com.sun.tools.xjc.maven2</groupId>+
+<artifactId>maven-jaxb-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<phase>generate-sources</phase>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<generatePackage> com.webserv.wsparameters</generatePackage>+
+<schemaDirectory>../audioid-rest-interface/src/main/resources+
+</schemaDirectory>+
+<includeSchemas>+
+<includeSchema>**/*.xsd</includeSchema>+
+</includeSchemas>+
+<extension>true</extension>+
+<strict>false</strict>+
+<verbose>false</verbose>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-javadoc-plugin</artifactId>+
++
+<executions>+
+<execution>+
+<goals>+
+<goal>javadoc</goal>+
+</goals>+
+<phase>compile</phase>+
+</execution>+
+</executions>+
+<configuration>+
+<encoding>UTF-8</encoding>+
+<verbose>false</verbose>+
+<show>public</show>+
+<subpackages> com.webserv.rest.rest.resources: com.webserv.rest.rest.commons: com.webserv.wsparameters+
+</subpackages>+
+<doclet>com.sun.jersey.wadl.resourcedoc.ResourceDoclet</doclet>+
+<docletPath>${path.separator}${project.build.outputDirectory}+
+</docletPath>+
+<docletArtifacts>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>wadl-resourcedoc-doclet</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>xerces</groupId>+
+<artifactId>xercesImpl</artifactId>+
+<version>2.6.1</version>+
+</docletArtifact>+
+</docletArtifacts>+
+<additionalparam>-output+
+${project.build.outputDirectory}/resourcedoc.xml</additionalparam>+
+<useStandardDocletOptions>false</useStandardDocletOptions>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+<executions>+
+<execution>+
+<id>generate</id>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+<phase>compile</phase>+
+</execution>+
+</executions>+
+<configuration>+
+<wadlFile>${project.build.outputDirectory}/application.wadl+
+</wadlFile>+
+<formatWadlFile>true</formatWadlFile>+
+<baseUri>http://192.168.2.149:8080/${project.build.finalName}+
+</baseUri>+
+<packagesResourceConfig>+
+<param> com.webserv.rest.resources</param>+
+</packagesResourceConfig>+
+<wadlGenerators>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.WadlGeneratorApplicationDoc+
+</className>+
+<properties>+
+<property>+
+<name>applicationDocsFile</name>+
+<value>${basedir}/src/main/doc/application-doc.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.WadlGeneratorGrammarsSupport+
+</className>+
+<properties>+
+<property>+
+<name>grammarsFile</name>+
+<value>${basedir}/src/main/doc/application-grammars.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.resourcedoc.WadlGeneratorResourceDocSupport+
+</className>+
+<properties>+
+<property>+
+<name>resourceDocFile</name>+
+<value>${project.build.outputDirectory}/resourcedoc.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+</wadlGenerators>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.codehaus.mojo</groupId>+
+<artifactId>exec-maven-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<goals>+
+<goal>java</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<mainClass>com.sun.jersey.samples.generatewadl.Main</mainClass>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-compiler-plugin</artifactId>+
+<inherited>true</inherited>+
+<configuration>+
+<source>1.5</source>+
+<target>1.5</target>+
+
+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.jvnet.jaxb2.maven2</groupId>+
+<artifactId>maven-jaxb2-plugin</artifactId>+
+<executions>+
+<execution>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-wsdl2code-maven-plugin</artifactId>+
+<version>1.4.1</version>+
+<executions>+
+<execution>+
+<id>generate reco core</id>+
+<goals>+
+<goal>wsdl2code</goal>+
+</goals>+
+<configuration>+
+<packageName>com.webserv.rest.webapp</packageName>+
+<wsdlFile>src/main/java/com/webserv/wsdl/web.wsdl</wsdlFile>+
+<databindingName>adb</databindingName>+
+</configuration>+
+</execution>+
+</executions>+
+</plugin>+
+<plugin>+
+<groupId>com.sun.tools.xjc.maven2</groupId>+
+<artifactId>maven-jaxb-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<generatePackage>com.webserv.wsparameters</generatePackage>+
+<schemaDirectory>src/main/xsd</schemaDirectory> <includeSchemas>+
+<includeSchema>**/*.xsd</includeSchema> </includeSchemas>+
+<extension>true</extension>+
+<strict>false</strict>+
+<verbose>true</verbose>+
+</configuration>+
+</plugin>+
+</plugins>+
+</build>+
+<profiles>+
+<profile>+
+<id>jdk-1.5</id>+
+<activation>+
+<jdk>1.5</jdk>+
+</activation>+
+<dependencies>+
+<dependency>+
+<groupId>com.sun.xml.bind</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1.10</version>+
+</dependency>+
+</dependencies>+
+<build>+
+<plugins>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-javadoc-plugin</artifactId>+
+<configuration>+
+<docletArtifacts>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>wadl-resourcedoc-doclet</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>xerces</groupId>+
+<artifactId>xercesImpl</artifactId>+
+<version>2.6.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml.bind</groupId>+
+<artifactId>jaxb-api</artifactId>+
+<version>2.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.activation</groupId>+
+<artifactId>activation</artifactId>+
+<version>1.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml.stream</groupId>+
+<artifactId>stax-api</artifactId>+
+<version>1.0</version>+
+</docletArtifact>+
+</docletArtifacts>+
+</configuration>+
+</plugin>+
+</plugins>+
+</build>+
+</profile>+
+<profile>+
+<id>xsltproc</id>+
+<activation>+
+<file>+
+<exists>../xsltproc_win32/xsltproc.exe</exists>+
+</file>+
+</activation>+
+<build>+
+<plugins>+
++
++
+<plugin>+
+<groupId>org.codehaus.mojo</groupId>+
+<artifactId>exec-maven-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<id>copy-docs-to-builddir</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>compile</phase>+
+<configuration>+
+<executable>copy</executable>+
+<commandlineArgs>src\\main\\doc\\*.* target\\classes+
+</commandlineArgs>+
+</configuration>+
+</execution>+
+<execution>+
+<id>prepare-xsltproc</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>package</phase>+
+<configuration>+
+<executable>copy</executable>+
+<commandlineArgs>..\\audioid-rest-interface\\src\\main\\resources\\*.xsd+
target\\classes</commandlineArgs>
+</configuration>+
+</execution>+
+<execution>+
+<id>exec-xsltproc: target/application.html</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>package</phase>+
+<configuration>+
++
+<executable>../xsltproc_win32/xsltproc.exe</executable>+
+<commandlineArgs>-o target/application.html+
src/main/doc/wadl_documentation.xsl
target/classes/application.wadl</commandlineArgs>
+</configuration>+
+</execution>+
+</executions>+
+</plugin>+
+</plugins>+
+</build>+
+</profile>+
+</profiles>+
+<pluginRepositories>+
+<pluginRepository>+
+<id>maven2-repository.dev.java.net</id>+
+<name>Java.net Repository for Maven</name>+
+<url>http://download.java.net/maven/2/</url>+
+<layout>default</layout>+
+</pluginRepository>+
+<pluginRepository>+
+<id>maven-repository.dev.java.net</id>+
+<name>Java.net Maven 1 Repository (legacy)</name>+
+<url>http://download.java.net/maven/1</url>+
+<layout>legacy</layout>+
+</pluginRepository>+
+</pluginRepositories>+
+<repositories>+
+<repository>+
+<id>maven2-repository.dev.java.net</id>+
+<name>Java.net Repository for Maven</name>+
+<url>http://download.java.net/maven/2/</url>+
+<layout>default</layout>+
+</repository>+
+<repository>+
+<id>maven-repository.dev.java.net</id>+
+<name>Java.net Maven 1 Repository (legacy)</name>+
+<url>http://download.java.net/maven/1</url>+
+<layout>legacy</layout>+
+</repository>+
+<repository>+
+<id>glassfish-repository</id>+
+<name>Java.net Repository for Glassfish</name>+
+<url>http://download.java.net/maven/glassfish</url>+
+</repository>+
+</repositories>+
+</project>+
Can anyonr contribute?

Problem with filePathSeperator and /

Problem with fileSeperatorChar and /. When I use fileSeperatorChar (to lacate a folder), the path is specified wrong. I want my program to run on different OS, so I need this to work.
If I do this:
JLabel label = new JLabel("", new ImageIcon("Images/label.gif");
//or something like that it works. Will this give me multiple platform support?
But when I try:
JLabel label = new JLabel("", new ImageIcon("Images" + filePathSeperatorChar + "label.gif");
//or something like that They all compile, but I took this off the top of my head. Anyway, when I print out the path for the second technuige, the path reads like this:
Images;label.gif

You used filePathSeparator. On Windows you use a semicolon to separate the components of a path, which is a list of directories or jar files, which is why you are getting a semicolon. You want the system property "file.separator" instead. Or use the variable File.separatorChar.

[SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!
I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully
The message shows me when I run "optirun":
[ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ 5454.262776] [ERROR]Aborting because fallback start is disabled.
I've tried with wiki's solutions, forums solutions...
Configurations files:
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=virtualgl
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00.0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
lspci |grep NVIDIA:
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)
I hope can help me
Thanks!
Last edited by surrealistic (2013-11-04 18:46:35)

My /var/log/Xorg.8.log:
[ 337.161]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 337.161] X Protocol Version 11, Revision 0
[ 337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
[ 337.161] Build Date: 01 November 2013 05:10:48PM
[ 337.161]
[ 337.161] Current version of pixman: 0.30.2
[ 337.161] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 337.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 4 14:20:04 2013
[ 337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 337.161] (==) ServerLayout "Layout0"
[ 337.161] (==) No screen section available. Using defaults.
[ 337.161] (**) |-->Screen "Default Screen Section" (0)
[ 337.161] (**) | |-->Monitor "<default monitor>"
[ 337.161] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 337.161] (**) | |-->Device "DiscreteNvidia"
[ 337.161] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 337.161] (**) Option "AutoAddDevices" "false"
[ 337.161] (**) Option "AutoAddGPU" "false"
[ 337.161] (**) Not automatically adding devices
[ 337.161] (==) Automatically enabling devices
[ 337.161] (**) Not automatically adding GPU devices
[ 337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 337.162] Entry deleted from font path.
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 337.162] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 337.162] (==) |-->Input Device "<default pointer>"
[ 337.162] (==) |-->Input Device "<default keyboard>"
[ 337.162] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 337.162] (II) Loader magic: 0x7fdc20
[ 337.162] (II) Module ABI versions:
[ 337.162] X.Org ANSI C Emulation: 0.4
[ 337.162] X.Org Video Driver: 14.1
[ 337.162] X.Org XInput driver : 19.1
[ 337.162] X.Org Server Extension : 7.0
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 337.162] setversion 1.4 failed
[ 337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[ 337.163] Initializing built-in extension Generic Event Extension
[ 337.163] Initializing built-in extension SHAPE
[ 337.163] Initializing built-in extension MIT-SHM
[ 337.163] Initializing built-in extension XInputExtension
[ 337.163] Initializing built-in extension XTEST
[ 337.163] Initializing built-in extension BIG-REQUESTS
[ 337.163] Initializing built-in extension SYNC
[ 337.163] Initializing built-in extension XKEYBOARD
[ 337.163] Initializing built-in extension XC-MISC
[ 337.163] Initializing built-in extension SECURITY
[ 337.163] Initializing built-in extension XINERAMA
[ 337.163] Initializing built-in extension XFIXES
[ 337.163] Initializing built-in extension RENDER
[ 337.163] Initializing built-in extension RANDR
[ 337.164] Initializing built-in extension COMPOSITE
[ 337.164] Initializing built-in extension DAMAGE
[ 337.164] Initializing built-in extension MIT-SCREEN-SAVER
[ 337.164] Initializing built-in extension DOUBLE-BUFFER
[ 337.164] Initializing built-in extension RECORD
[ 337.164] Initializing built-in extension DPMS
[ 337.164] Initializing built-in extension X-Resource
[ 337.164] Initializing built-in extension XVideo
[ 337.164] Initializing built-in extension XVideo-MotionCompensation
[ 337.164] Initializing built-in extension XFree86-VidModeExtension
[ 337.164] Initializing built-in extension XFree86-DGA
[ 337.164] Initializing built-in extension XFree86-DRI
[ 337.164] Initializing built-in extension DRI2
[ 337.164] (II) LoadModule: "glx"
[ 337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 337.172] (II) Module glx: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Server Extension
[ 337.172] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 337.172] Loading extension GLX
[ 337.172] (II) LoadModule: "nvidia"
[ 337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Video Driver
[ 337.172] (II) LoadModule: "mouse"
[ 337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 337.172] (II) Module mouse: vendor="X.Org Foundation"
[ 337.172] compiled for 1.14.0, module version = 1.9.0
[ 337.172] Module class: X.Org XInput Driver
[ 337.172] ABI class: X.Org XInput driver, version 19.1
[ 337.172] (II) LoadModule: "kbd"
[ 337.173] (WW) Warning, couldn't open module kbd
[ 337.173] (II) UnloadModule: "kbd"
[ 337.173] (II) Unloading kbd
[ 337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 337.173] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 337.173] (--) using VT number 1
[ 337.173] (II) Loading sub module "fb"
[ 337.173] (II) LoadModule: "fb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 337.173] (II) Module fb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 337.173] (II) Loading sub module "wfb"
[ 337.173] (II) LoadModule: "wfb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 337.173] (II) Module wfb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "shadow"
[ 337.173] (II) LoadModule: "shadow"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 337.173] (II) Module shadow: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.1.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "ramdac"
[ 337.173] (II) LoadModule: "ramdac"
[ 337.173] (II) Module "ramdac" already built-in
[ 337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 337.174] (==) NVIDIA(0): RGB weight 888
[ 337.174] (==) NVIDIA(0): Default visual is TrueColor
[ 337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 337.174] (**) NVIDIA(0): Option "NoLogo" "true"
[ 337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 337.174] (**) NVIDIA(0): Option "UseEDID" "false"
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 337.174] (**) NVIDIA(0): Enabling 2D acceleration
[ 337.174] (**) NVIDIA(0): Ignoring EDIDs
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 337.174] (**) NVIDIA(0): mode
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 341.309] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 341.309] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 341.309] (EE) NVIDIA(0): README for additional information.
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 341.309] (II) UnloadModule: "nvidia"
[ 341.309] (II) UnloadSubModule: "shadow"
[ 341.309] (II) UnloadSubModule: "wfb"
[ 341.309] (II) UnloadSubModule: "fb"
[ 341.309] (EE) Screen(s) found, but none have a usable configuration.
[ 341.309] (EE)
Fatal server error:
[ 341.309] (EE) no screens found(EE)
[ 341.309] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 341.309] (EE)
[ 341.309] (EE) Server terminated with error (1). Closing log file.
dmesg |grep bbswitch:
[ 13.570577] bbswitch: version 0.7
[ 13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 13.570687] bbswitch: detected an Optimus _DSM function
[ 13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 13.572354] bbswitch: disabling discrete graphics
[ 261.419114] bbswitch: enabling discrete graphics
[ 278.445698] bbswitch: disabling discrete graphics
[ 279.055257] bbswitch: enabling discrete graphics
[ 286.292315] bbswitch: disabling discrete graphics
[ 291.911052] bbswitch: enabling discrete graphics
[ 310.011289] bbswitch: disabling discrete graphics
[ 336.982794] bbswitch: enabling discrete graphics
[ 349.526470] bbswitch: enabling discrete graphics
I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work

Problem with comma and point

Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
Martin

Hi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( "<p><p> The current user is no
longer valid, please log in
> again.</p></p>" & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

Problem with columns in the middle of my book

I am writing my second book with Pages 2.02 and have run into a problem with columns. I want to add a long list of items as a list with check boxes for readers to check off. If I paste in enough text for three or four pages of two columns it gets messed up in various ways - the text flows into the following text if I don't use section breaks at the end instead of layout breaks, if I use section breaks it solves that one, but if I add anything to the list it changes all the columns across the pages so that one or several of the pages has way less in the right column than in the left. So far the left column fills the entire page all the time, but the right column has lots of spaces. If I switch back and forth from one column to two, it fixes it. If I add text before the list section it messes everything up again and because there is a section break I end up with a little bit of text on the last page and a huge gap before the single column part that follows.
Does anyone know how to get reliable results that will not mess me up when adding content before the list or in the list itself?
PowerBook G4 Mac OS X (10.4.8)

Hi Cymru,
Thank you for thinking about my problems. I guess I s half asleep when I posted and it didn't make sense.
I have so far 77 pages of the book divided into several chapters via section breaks. Inside the 5th section there is almost two pages of paragraphs. Those paragraphs could become 3.75 pages or who knows how long before the list of items. The list of items is 226 items separated by carriage returns and go from one word with 5 characters to 7 words and 34 characters. It needs to be a list with check boxes before them so that the user can check off the items that apply. It is a workbook about turning bipolar into an advantage and is currently 8.5 x 11 and printed on my laser printer for now, but when completed will be more like 8 x 10, so it needs to resize without major hassles.
I have tried every combination of breaks to get the list to flow in two columns, but perhaps have not done the correct combination. I show invisibles and layout. At the end of my paragraphs I do a paragraph return. I then do either a section break or a layout break, followed by a paragraph return and another layout or section break. I then put my curser before the paragraph break, but after the first section/paragraph break, and set columns to 2, evenly divided by default with 3.2026" columns and .3375" gutter, but I want them to change with page size in the future.
Once set up, I copy the text out of BBEdit and paste into the left column. It takes up several pages because it is formatted to do double spaces, so I use one of my styles to make it bold and single spaces. I then apply list style with image bullets and one of the default box images that came with Pages. There are 5 items in each column on the first page because it is close to the bottom, but flows into the next two pages. (with text edits it might end up 20 items in each column on the first page) The second page has 39 items in each column and the last page has 8 items in the left column only, but if with section breaks take up the whole page and the next paragraphs start on the next page. If I then add items to the list, every page gets messed up and the second page ends up with 39 on the left column and less items in the right column for each added item.
If I use layout breaks instead of section breaks, the paragraphs following my lists (now with only one column) end up under the list. What that means is I can see my bold items, but beneath them are my paragraphs that belong after the list. I can see the layout break at the end of the list, but the columns that are shown as part of the 'view layout' are visible right over the single column text also for the rest of the page. The only way to solve that is to go with section breaks and put up with the gap from the end of the list to the following paragraphs.
I hope this makes more sense.
Tom
PowerBook G4 Mac OS X (10.4.8)

I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct tho

I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.

Charging cords are covered by the iPhone warranty or their own warranty
if puchased separately. Take your iPhone and the cords to your local
Apple store for evaluation and possible replacement.

Clipboard_import problem with separator

Similar Messages

Maybe you are looking for