Code to Retrieve the message from Queue in Oracle BPEL

Actually I am placing the Message into JMS Queue using JMS Adapter.After Placing the message,I need to retrieve the placed message from same queue.
Right now I am using the Receive Activity and the JMS Adapter to retrieve the message from Queue.But my receive activity is always in the waiting state itself and I am not able to retrieve the message from queue.What might be the issue????
Can anybody give me a better suggestion so that I can go ahead??
Thanks in advance for your help.

Hi Raja,
Is the process a empty bpel process which is used to get the message from the MQ?
Regards
Surya

Similar Messages

Need help to retrieve the message from MQ using get operation

Hi
Used MQ adapter to Post a message to queue.
And used Received activity in bpel to retrieve the message using MQ adapter from same queue(used get operation) , got an error message as timed
out exception.
Could some one assist in retrieving the message from MQ using get operation.
Regards
Raja

Hi Raja,
Is the process a empty bpel process which is used to get the message from the MQ?
Regards
Surya

Not able to get the message from Queue using MQ adapter

HI
Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception.
Kindly help to proceed with this issue.

Hi,
Am also facing the same issue.
I would be thankful if anyone can provide the solution

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

Dequeue with OCCI does not remove the message from the queue

Hey there,
I have this problem where no matter what dequeue option I try the messages never seem to be removed from the queue... I tried looking around and found only a similar un-answered question...
Thanks in advance...
void TryAnydataDequeue(oracle::occi::Connection * conn)
     try
          std::cout << "Dequeue Commence..." << std::endl;
          Consumer cons(conn);
          //Settings de dequeue
          cons.setCorrelationId("SPPC");
          cons.setQueueName("Anydata_queue");
          cons.setConsumerName("SNOOP");
          cons.setDequeueMode(cons.DEQ_REMOVE);
          //cons.setDequeueMode(cons.DEQ_LOCKED);
          std::cout << "Reception du message..." << std::endl;
          Message m2 = cons.receive(Message::ANYDATA);
          AnyData any(conn);
          any = m2.getAnyData();
          if(!any.isNull())
               oracle::occi::TypeCode type = any.getType();
               if(type == OCCI_TYPECODE_VARCHAR2)
                    std::string msg = any.getAsString();
                    std::cout << "Message Reçu: ";
                    std::cout << msg << std::endl;
               else
                    std::cout << "Format du message invalide..." << std::endl;
               std::cout << "Fin du message... (Press a key)" << std::endl;
          else
               std::cout << "Message invalide..." << std::endl;
          System::String * theInput = System::Console::ReadLine();
     catch(SQLException ex)
          std::cout << "Exception: " << ex.getErrorCode() << " - " << ex.getMessage() << std::endl;
          System::String * tnput = System::Console::ReadLine();
}

The message from the queue will be removed when you do a commit after a successful dequeue call, depending upon your message retention settings.
After you have done this processing and successfully performed a commit, what is the output of the following query:
SQL> connect AQADMIN/password
SQL> select msg_state from aq$<your_queue_table_name_goes_here> ;?
If it is PROCESSED, check your queue retention settings.
Additionally, make sure that the init.ora parameter AQ_TM_PROCESSES is set to a NON-ZERO value for this to happen.

Retrieve the character from hex code

I want to write the hex code / ASCII code of the English alphabets ( A - Z and a - z ) in a file and again want to read those codes (either ASCII or Hex code) from the file to retrieve the characters from them. How it is possible?
For example, ASCII code of 'A' is 65 and hex code is 41.
ASCII code of 'z' is 122 and hex code is 7A.
Avijit

Forgot that you need to convert them back:
        Character c = new Character('A');
        System.out.println("char : "+c);
        int ascii = (int) c.charValue();
        System.out.println("ascii: "+ascii+" => "+(char) ascii);
        String hex = Integer.toHexString(ascii);
        System.out.println("hex : "+hex +" => "+(char) Integer.parseInt(hex, 16));

The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".

Hi All,
We have two BizTalk nodes, from both nodes we are getting this error from today morning, nothings has changed from application end.
Error : The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".
Warning : Cannot perform encryption or decryption because the secret is not available from the master secret server. See the event log for related errors.
Can you please suggest step where need to check.
I don't have any knowledge where the master secret file saved during installation.
Regards
Suman

Most of the time, master secret server is not backup frequency. Mostly its is done during the time when the servers have been setup. If anything changed between the time the master secret has been backed up and now, then you don't have the correct version
of master secret file backed up. This is why its is always a good practice to backup the master secret periodically and also try restoring in any of the test server to verify the backed up file is correct and also to make us conformable in restore
process.
You have one option now, try restoring with the file what you have (4 years old). If the backed version is not the correct version, then only option is to reconfigure the BizTalk.
MSDN: How to Restore the Master Secret
You cannot backup the master secret file now as ii could have been corrupted. That the reason we're suggesting to restore the corrupted master secret file. For your future reference, following the steps as suggested in this article to take backup of master
secret.
MSDN: How to Back Up the Master Secret
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Retrieving error messages from lpxus.msg

What methods must be invoked in order to retrieve the correct error codes.
Eg 202 means 'file not found'.
How would be retrieve this message from \mesg\lpxus.msg(using the C++ XML Parser)
There are no examples in the samples.
null

Hi,
This is explained in the readme and function documentation:
Currently, the only message file is in English although message files for
other languages may be supplied in future releases. You should set the
environment variable <tt>ORA_XML_MESG</tt> to point to the <b>absolute
path</b> of the <tt>mesg/</tt> subdirectory. Alternately, if you have an
<tt>$ORACLE_HOME</tt> installed, you may copy the contents of the
<tt>mesg/</tt> subdirectory to the <tt>$ORACLE_HOME/oracore/mesg directory</tt>.
The function documentation for xmlinit() explains the msghldr parameter that can
be used to process error messages (or they are printed to stderr if msghdlr not
supplied).
Thanks,
Oracle XML Team
null

How to retrieve the values from a LinkedList

Hello,
I have just put this question in java programming forums by mistake...I think that it should be here ...
I have created a LinkedList to store the results of a query to a database.
These reasults are decimal numbers and then I want to sum all these numbers to be able to make the average.
But when I try to retrieve the values of the Linked List I always receive an incopatible types error..
Here is an extract of my code in a jsp page.
LinkedList Average = new LinkedList();
String Media = rst.getString(10);
Average.add(Media);
int Size = Average.size();
double Sum = 0.0;
for (int i=0; i<=Size; i++)
double Result = Average.get(i)
Sum = Sum + Result;
}If I try to retrieve the value of only one node from the list , I can just putting <%=Average.get(i)%>...but..how can I retrieve all the values (they are decimal numbers) to be able to add them?

If you want to sum all the values, is there any reason you just don't retrieve the sum from the database rather than the list of values?
anyway
List average = new LinkedList();
while (rst.next()){
// retrieve the number:
String mediaString = rst.getString(10);
Double media = Double.valueOf(mediaString);
// or maybe like this if it is a number in the database
Double media = new Double(rst.getDouble(10));
average.add(media);
doubleSum = 0.0;
for (Iterator it = average.iterator(); it.hasNext(); ){
Double result= (Double) it.next();
doubleSum += result.doubleValue();
}

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
    AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
    WHEN 'K15'.
      <fs>-adqnt2 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
    WHEN 'MT'.
      <fs>-adqnt3 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

Is there a simple way to retrieve the data from a resultset using JavaBean?

I have a result set from a select * from users where userid = xxx statement. However, at the moment I have had to hard code the remainder of the code to get the data from each column as I need the column name as well as its data.
I had read somewhere using java beans and reflection it is easier. But i do not know know how.
Is there a simple way to retrieve the data from a result set ?
thanks in advance-
kg

Well, it is not really simple. But there are Open Source components to simplify it for you. See e.g http://www.must.de/Jacompe.htm - de.must.dataobj.DataObject and its subclasses. Feel free to contact me if you have any questions: [email protected]

Is it possible to retrieve the data from maintainance view?

Hi experts,
Am facing one problem.
Is it possible to retrieve the data from Maintainance View ,If yes how?
IF it is not possible then Y?
While am trying to retrieve data from maintainance view it's showing message like
"it is not a database view or table".
Can u pls give me ans.
Thanks&Regards,
Arun.

Hi Arun,
It is not possible to retrieve the data from Maintenance view. Maintenance View is different and Database View is different.
Maintenance view : Maintenance view permits you to maintain the data of an application object together.The data is automatically distributed in the underlying database tables.
A standardized table maintenance transaction is provided (SM30), permitting you to maintain the data from the base tables of a maintenance view together.
In other words, Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Database View: Data about an application object is often distributed on several database tables. A database view provides an application-specific view on such distributed data.A database view is automatically created in the underlying database when it is activated.Database views implement an inner join.If the database view only contains a single table, the maintenance status can be used to determine if data records can also be inserted with the view. If the database view contains more than one table, you can only read the data.
Database views should be created if want to select logically connected data from different tables simultaneously. Selection with a database view is generally faster than access to individual tables. When selecting with views, you should also ensure that there are suitable indexes on the tables contained in the view.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)

Hi there,
When I'm trying to manage spaces in SAP Business Objects Explorer 4.1 SP04, I'm getting the following error:
Failed to retrieve the data source list.
There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)
For input string: "false"
I've already restart Explorer servers (Explorer Exploration Server, Explorer Indexing Server, Explorer Master Server and Explorer Search Server) and rebooted the server where Explorer is installed.
Nothing seems to fix this error message. I'm not able to create new spaces because I cant access the sources:
I'd appreciate some help !
Thanks in advance

HI Pavan,
Admin is on the Administrators Group, which as Full Control on the Explorer Application
I think this worked on the day the Explorer was installed (past week).
Since them never worked.

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Code to Retrieve the message from Queue in Oracle BPEL

Similar Messages

Maybe you are looking for