ColdFusion WSDL Integration Problem
I am trying to use a thrid-party WSDL system from a CFMX 7.01
installation on Windows 2003. A request to a simple (i.e. no
parameters) method returns good data:
CFML:
<cfinvoke webservice="
http://prod3.ogangi.com/contentManagerWS/services/Version?wsdl"
method="getVersion" returnvariable="results">
<cfoutput>#results#</cfoutput>
However, using a more complex method throws an error
everytime:
CFML:
<cfinvoke webservice="
http://prod3.ogangi.com/contentManagerWS/services/Categories?wsdl"
method="getCategory" returnvariable="results">
<cfinvokeargument name="categoryid" value="294"/>
<cfinvokeargument name="seller" value="jamaica"/>
</cfinvoke>
<cfoutput>#results#</cfoutput>
ERROR MSG (click the link):
http://kryptos.thefactoryi.com/bmobilepulse/error_result.cfm
I checked the WSDL against the following validator and
everything seems to be functioning correctly:
http://www.mgateway.com/wsdlClient.htm
NOTE: Using the getCategory method use "294" for categoryid
and "jamaica" for seller.
Using DreamWeaver, the WSDL service cannot be added to the
Components toolbar (when using CF), but can be added when using any
other document type (JSP, ASP VB, ASP #).
What am I missing? I'm not an expert w/ WSDL, but after hours
of trying other examples and tutorials I cannot figure out this
problem. Any insight or help will be deeply appreciated!
-jh
there is a problem with the webservice in the
CategoriesService.class. that is why it wont add in dreamweaver. it
tries to validate the wsdl for coldfusion. i have also had mixed
results with using a wsdl file that has multiple methods with the
same name, i.e. the three getCategoryList methods in this wsdl
file. so if you do get it working, you may want to manually edit
the wsdl to use only one method and access the modified wsdl file
locally on the cf server.
hth
Similar Messages
-
What command would you use to check for allocation, structural, or logical integrity problems?
Wondering if you are looking for DBCC CHECKDB command? For more information, on that command, try to look at this:
http://technet.microsoft.com/en-us/library/ms176064.aspx -
hello,
I had configured the outlook properly , but it does not able to send the main in my configred mail id & within the outlook.
some times it is work properlly after new installation of outlook addon but when i am change the user that time it is not work and also doen't get that check box of "send mail tho the outllok"
please help me out of this.Check the following threads:
Re: BO2069: Failed to send e-mail via Microsoft Out look"
Outlook integration problem
Do check the following SAP Note:
Note 1064323 - OI: MS Outlook does not send new mail with OI installed
Regards
Satish -
Portal BW Integration Problem - Role Menu Error
Hi, I have a web template with a role menu on it. The application works fine when I execute it directly on the BW Server. But, whenever I execute the application through our portal and select a node on the role menu I receive a windows error dialog with the following message:
A runtime error has occurred.
Do you wish to Debug?
Line: 250
Error: Permission Denied
[Yes] [No}
Seems like Portal/BW integration problem.
Can anyone help?Question Closed
-
Struts 2 Integration problem witn Coldfusion in CF 8 MX server
I have successfully integrated struts 2 with existing coldfusion mx 8 server. The action classes are invoked and executed. However the struts tags are not getting instantiated in my jsps.
Steps i tried:
- configuring wwwroot/web-inf/web.xml in coldfusion 8
- adding relevant jars.
- packaging struts 2 actions under '/extended' context since wwwroot is not supporting context.
- placing 'struts.xml' under '../runtime/lib' since the struts.xml is not being recognized under '/wwwroot/web-inf/classes'
All the jsps render and action executes my code. However, when i try using struts-tags like <s:form>
it throws an exception which looks like:
04/08 21:42:05 error Translator.CompilationFailedExceptionCompiler errors:
Found 12 semantic errors compiling "C:/ColdFusion8/wwwroot/WEB-INF/jsp/jrun__pages__response32ejsp14.java":
64. org.apache.struts2.views.jsp.ui.FormTag _tag0 = (org.apache.struts2.views.jsp.ui.FormTag) pageContext.getTagHandlerInstance(0,org.apache.struts2.views.jsp.ui.FormTag.class);
^-----^
*** Semantic Error: The class file "StrutsBodyTagSupport.class" in "C:\ColdFusion8\wwwroot\WEB-INF\lib\struts2-core-2.0.11.1.jar\org\apache\struts2\views\js p" has an invalid format (bad string annotation constant).
64. org.apache.struts2.views.jsp.ui.FormTag _tag0 = (org.apache.struts2.views.jsp.ui.FormTag) pageContext.getTagHandlerInstance(0,org.apache.struts2.views.jsp.ui.FormTag.class);
^-------------------------------------^
*** Semantic Error: Type "FormTag" was not found.
134. org.apache.struts2.views.jsp.ui.SubmitTag _tag3 = (org.apache.struts2.views.jsp.ui.SubmitTag) pageContext.getTagHandlerInstance(3,org.apache.struts2.views.jsp.ui.SubmitTag.class);
^---------------------------------------^
*** Semantic Error: Type "SubmitTag" was not found.
at jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:135)
at jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:94)
at jrun.jsp.Translator.compilePage(Translator.java:176)
at jrun.jsp.Translator.translate(Translator.java:254)
at jrun.jsp.Translator.translate(Translator.java:101)
at jrun.jsp.JSPEngine.translateJSP(JSPEngine.java:707)
at jrun.jsp.JSPServlet.translate(JSPServlet.java:125)
at jrun.jsp.JSPServlet.service(JSPServlet.java:113)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invokeNext(JRunRequestDispatcher.java:584)
at jrun.servlet.JRunRequestDispatcher.forwardInvoke(JRunRequestDispatcher.java:553)
at jrun.servlet.JRunNamedDispatcher.forward(JRunNamedDispatcher.java:64)
at coldfusion.license.JspLicenseServlet.service(Unknown Source)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invokeNext(JRunRequestDispatcher.java:584)
at jrun.servlet.JRunRequestDispatcher.forwardInvoke(JRunRequestDispatcher.java:553)
at jrun.servlet.JRunRequestDispatcher.forward(JRunRequestDispatcher.java:201)
at org.apache.struts2.dispatcher.ServletDispatcherResult.doExecute(ServletDispatcherResult.j ava:139)
at org.apache.struts2.dispatcher.StrutsResultSupport.execute(StrutsResultSupport.java:178)
at com.opensymphony.xwork2.DefaultActionInvocation.executeResult(DefaultActionInvocation.jav a:348)
at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:253)
I tried extracting the 'struts-tags.tld' and placing it in 'wwwroot/web-inf/lib' and defining in web.xml, but in vain. Please help me out with this issue.
Thanks in advancetorstenp wrote:
> for the last 10 days after a server restart the
scheduled tasks all run twice.
> This is a HUGE problem for a process that does not
complete immediately and
> moves / creates files.
The first thing I would look for is more then one instance of
ColdFusion
running, each one processing the scheduled task. There could
easily
have been another ColdFusion process that had been turned off
in the
services panel that was restarted with the server reboot. -
Hi All
I'm facing this issue...
My Process Integration version is: 7.1 EHP1
When create a WSDL, this comes with the WS_POLICY by default in true!
and thats my problem....
I'll try to explain all my Steps:
1.- in the ESR I Have created all the necesary (DT, MT, SI, MM, OP)
2.- in te Directory, i Have created all objects: Receiver, Sender, I.Det, R.Det.
3.- Right click on Sender Agreement -> Display WSDL
4.- this windows comes with 2 things: 1 the WSDL URL and 2, the WSDL per se
if I download the WSDL, I can change manually the ws_policy from "true" to "standard" or "false", and with this it works fine... but this solutions doesn't works for me... I need to use the WSDL URL (http://XXXXX:50100/dir/wsdl?p=sa/10eee4f1d18632f182bf5eb4b42cfcdb)
but, if I use, the WSDL URL, the definition inside it comes with ws_policy = TRUE and I can't change it.
I have followed this link: /people/holger.stumm2/blog/2010/03/19/wsdl-wspolicy--what-is-it-und-how-can-i-get-rid-of-it-in-pi
wich talks about how to replace the call of WS_POLICY with STANDARD,
this is my real URL:
http://XXXXX:8000/sap/bc/srt/wsdl/sdef_ZSI_LABORATORIO_GS02_REQUEST_S/wsdl11/ws_policy/document?sap-client=100
this is my URL changed.
http://XXXXX:8000/sap/bc/srt/wsdl/sdef_ZSI_LABORATORIO_GS02_REQUEST_S/wsdl11/STANDARD/document?sap-client=100
but I see than this is pointing to SAP ECC and not to PI... here I'm confused.
if this works I could see the messages from Legacy to PI in the SXI_MONITOR???
basically what I can see with this is: a direct call to the "service interface" wich I have activated in the SPROXY.
But I think than the Policy status can't be changed in PI...
when I look in the Service Interface WSDL TAB I can see, than already it has the policy in true, I have set the Security profile to "NO" but the WSDL TAB shows: <wsp:UsingPolicy wsdl:required="true" />
if someone knows how to fix it I'll apreciate it
Thanks and RegardsHello,
I know it's an old topic, but we've got the exact same problem here.
We want to remove the policy tags in the WSDL generated by PI (7.11), or at least set <wsp:UsingPolicy wsdl:required="false" />
Our webservice is consumed by another application that stumbles upon these tags. Now, everytime we have to remove these tags manually. Hope someone can provide me with a solution. Thanks in advance.
Regards,
Floris -
Active Directory integration problem, Bind AC and OD
Hi.
I'm trying to set an Open Directory as "connect to a Directory System" because I have a windows 2000 server with Active Directory. But i have a problem when i click on "open directory Access", Access Directory appear and I select Active Directory.
xxx.yyy is the server with active directory, with its admin and its password. but i cant Bind it and an error always appear.
can you help me?
what's "active directory domain"?is it xxx.yyy?
and what's "computer ID"?
Are there others parameters to set for example in DNS or other?
help help helpWhat are you trying to achieve by doing this?
Got to http://www.afp548.com/ and serach for AD-OD integration.
http://www.afp548.com/article.php?story=20051202151540574 -
BE 3000 with Jabber (for Mac) and webex connect integration problems
Hi,
This is my first question on the forum so please be gentle!
I have a customer who has a Business Edition 3000 and they have purchased WebEx connect and Jabber integration to go with it.
My problem is I am having difficulty getting the setup to work and I have a number of questions on how to set this up. Most of the docs on Cisco's website seem to be related to either CUCME or full CUCM, but not a lot on BE 3000. My questions are below:
1. I have been reading the documentation for WebEx connect and it states to set the IP address of the BE 3000 server in the Configuration>Additional Services>Unified Communications>Voicemail tab. This is currently on the network with a 192.168.x.x address however. My predecessor put this IP address in the WebEx configuration page but I'm not sure this will work with a private IP as I don't know how this communicates back. The documentation isn't very clear on this. Does this have to be a public IP address / FQDN for it to work?
2. Are there any SRNDs for this type of setup that could help? Again, looking through the website hasn't turned anything up yet.
Note:
we are using the following software:
Jabber for MAC:
uc-client-mac-8.6.7.20127.fcs.zip
MAC OS:
OSX 10.8.3
BE 3000:
MCS7890C1-BE8
8.6.4.10000-15.
Thanks in advance for any help.
Regards,
JasonHi - I have done this via the admin portal but still cannot get the Jabber client for Mac to register for voice. The Windows version works fine for the same user and CUCM device. Are there any other settings that need to be enabled specific to the Mac client?
Thanks. -
Help needed with wsdl compilation problem
Hi all,
I am trying to perform a wsdl2java run on a wsdl, but it keeps failing and I can't work out why.
Can anyone help me spot the problem?
Here is the problem I get:
[WARN] Type {http://Input.LeaseBaseGetMntcHistory.remarketing.gf.com}MntcHistory missing!
[WARN] Type {http://Output.LeaseBaseGetMntcHistory.remarketing.gf.com}MaintenanceHistory missing!And here is the full wsdl
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="http://Master.LeaseBaseGetMntcHistory.Remarketing.gf.com" xmlns:ns0="http://Input.LeaseBaseGetMntcHistory.remarketing.gf.com" xmlns:ns1="http://Output.LeaseBaseGetMntcHistory.remarketing.gf.com" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" name="LeaseBaseMntcHistory" targetNamespace="http://Master.LeaseBaseGetMntcHistory.Remarketing.gf.com">
<wsdl:types>
<xsd:schema xmlns = "http://Input.LeaseBaseGetMntcHistory.remarketing.gf.com"
targetNamespace = "http://Input.LeaseBaseGetMntcHistory.remarketing.gf.com"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified"
attributeFormDefault="unqualified">
<xsd:element name="FleetID" type="xsd:string"/>
<xsd:element name="CountryID" type="xsd:string"/>
<xsd:element name="RegID" type="xsd:string"/>
<xsd:element name="CompanyID" type="xsd:string"/>
<xsd:element name="ChassisID" type="xsd:string"/>
<xsd:element name="FleetDetails">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="FleetID"/>
<xsd:element ref="CountryID"/>
<xsd:element ref="RegID" minOccurs="0"/>
<xsd:element ref="CompanyID" minOccurs="0"/>
<xsd:element ref="ChassisID"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="MntcHistory">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="FleetDetails"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<xsd:schema xmlns = "http://Output.LeaseBaseGetMntcHistory.remarketing.gf.com"
targetNamespace = "http://Output.LeaseBaseGetMntcHistory.remarketing.gf.com"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<xsd:element name="Date" type="xsd:string"/>
<xsd:element name="Mileage" type="xsd:string"/>
<xsd:element name="StatusCD" type="xsd:string"/>
<xsd:element name="Operation" type="xsd:string"/>
<xsd:element name="Details">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="Detail" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="FleetID" type="xsd:string"/>
<xsd:element name="RegID" type="xsd:string"/>
<xsd:element name="MaintenanceHistory">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="FleetID"/>
<xsd:element ref="RegID"/>
<xsd:element ref="LstUpdateDate"/>
<xsd:element ref="MntcWorkHistory"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="LstUpdateDate" type="xsd:string"/>
<xsd:element name="MntcWorkHistory">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="MntcWork" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="MntcWork">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="Date"/>
<xsd:element ref="Mileage"/>
<xsd:element ref="StatusCD"/>
<xsd:element ref="LineItems"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="LineItems">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="LineItem" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="LineItem">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="Operation"/>
<xsd:element ref="Details"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Detail" type="xsd:string"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="MntcHistory">
<wsdl:part name="parameters" type="ns0:MntcHistory"/>
</wsdl:message>
<wsdl:message name="MaintenanceHistory">
<wsdl:part name="parameters" type="ns1:MaintenanceHistory"/>
</wsdl:message>
<wsdl:portType name="portType">
<wsdl:operation name="LeaseBaseClientOp">
<wsdl:input message="tns:MntcHistory"/>
<wsdl:output message="tns:MaintenanceHistory"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="intfwsLeaseBaseClientEndpoint0Binding" type="tns:portType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="LeaseBaseClientOp">
<soap:operation style="rpc" soapAction="/Processes/LeaseBaseClientOp"/>
<wsdl:input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://Input.LeaseBaseGetMntcHistory.remarketing.gf.com" parts="parameters"/>
</wsdl:input>
<wsdl:output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://Output.LeaseBaseGetMntcHistory.remarketing.gf.com" parts="parameters"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="intfLeaseBaseClient-service">
<wsdl:port name="intfwsLeaseBaseClientEndpoint0" binding="tns:intfwsLeaseBaseClientEndpoint0Binding">
<soap:address location="http://localhost:8080/Processes/intfwsLeaseBaseClientEndpoint0"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>Thanks in advance!Hello
You may try something like the modified code below.
Noticiable changes :
#1 - Removed the parentheses. Your original code won't yield alias list but a list of finder objects, which is the reason why Preview opens the image. (The statment 'open finderObject' behaves the same as double clicking it in Finder)
#2 - Only delete the original jpeg files which are converted to tiff.
#3 - Build new path for converted image.
#4 - Save in new path. (When saving image in a format other than its original format, always save the image to a new file and do not attempt to overwrite the source file.)
cf.
http://www.macosxautomation.com/applescript/imageevents/08.html
on run
tell application "Finder"
set PicturesFolder to (path to home folder as string) & "Pictures:SenseCam:" as alias
set Photographs to get entire contents of PicturesFolder as alias list -- #1
end tell
set DonePhotos to {} -- #2
tell application "Image Events"
launch
repeat with Photo in Photographs
set Photo to Photo's contents
set oldPath to Photo as string
if oldPath ends with ".jpg" then
set newPath to oldPath's text 1 thru -5 & ".tif" -- #3
set ImageRef to open Photo
save ImageRef as TIFF in newPath -- #4
close ImageRef
set end of DonePhotos to Photo -- #2
end if
end repeat
end tell
tell application "Finder"
delete DonePhotos -- #2
end tell
end run
Hope this may help,
H -
HELP! Form-Report integration problem!
Hi all, I have a problem in integrating report in dev10i. I used to use Dev6i and have no problem in using run_report_object in 6i. I have posted this in Report for few days but haven't got response.
I got the REP-0503 You did not specify the name of the report and FRM-40738 Argument 1 to builtin Report_Object_Status can not be null. The report run OK in report builder and I create the paper only layout. Also, I save the report as *.rdf and create a report object in form that point to this *.rdf file.
This is my PL/SQL code:
PROCEDURE P_PRINT_REPORT_OBJ(vc_reportoj Varchar2, vc_reportserver Varchar2, vc_runformat Varchar2) IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT(vc_reportoj);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, XXX='||:XXX.XXX||' paramform=no');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
ELSE
message('Report failed with error message '||vc_rep_status);
END IF;
END;
What gives? Do I miss something here? Do I have to set up other thing??? Also what is the name of report server in Dev10i? I am under impression that this is not needed so I put blank '' when I call this procedure in WHEN-BUTTON-PRESSED trigger like this:
P_PRINT_REPORT_OBJ('myreportobj','','HTML');Hi all, I created simple report from 1 table and save it as *.rdf. I then make a simple form consisting 1 block and a button that have WHEN-BUTTON-PRESSED trigger that call P_PRINT_REPORT_OBJ. I create a report object in the form that point to my *.rdf report file and name the object MYREPORT. This time it gives Rep-0110 Can not open file '%n~<intangible character>' and REP-1170 Error while opening or saving a document. After that other message popup with REP-0110. It seems that FIND_REPORT_OBJECT could not find the file at all/giving the wrong filename as argument. Do I have crooked installation? I have tried it on 2 diff machine running XP2. Is this because of Win XP2? I have admin privilage user account for winXP2. Please help, this is not making a sense at all. I have no problem in Dev6i.
PROCEDURE P_PRINT_REPORT_OBJ IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT('MYREPORT');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
END; -
SAP BI 7.0 and BO XI 3.1 Integration Problems
Hi everyone,
After following through every step of:
Re: Checklist for SAP BI 7.0 and BO XI 3.1 integration - Challenges
I still get the following problems:
1. Unable to find SAP in CMC Authentication
2. At the login page of InfoView, I can select SAP as authentication method. However, after inputting the login information, I get the "The plugin secSAPR3 does not exist in the CMS (FWM 02017)"
3. I was able to create a new connection in Designer to connect to SAP BW, and select one of the existing cubes. After uploading the Universe, I created a new Web Intelligence document and dragged couple of objects into Result Objects. After clicking Run Query, I get the following:
A database error occured. The database error text is: The MDX query SELECT { [Measures].[0BBP_BILITM] } ON COLUMNS FROM [$0BBP_C01] failed to execute with the error See RFC trace file or SAP system log for more details. (WIS 10901)
Even tried:
Webi Stucks while trying to create report with BW7.0 (WIS 10901)
and still no luck.
Here's the environment information:
Installed (In Order):
1. BOE XI 3.1
2. Xcelsius 2008
3. LIVEOFFICE
4. SAP GUI 7.0
5. Crystal Report 2008 with SP1
6. BO JCo
7. BO Integration Kit for SAP
Any help will be appreciated, thanks in advance!!
DavidHi Ingo,
I've noticed that in your step by step manual, you are using BO XI 3.0. So I created a Virtual PC with Windows Server 2003, and installed BO XI 3.0, SAP GUI 7.0, Java Connector, BO Integration Kit for SAP.
Without any errors nor issues, now I see "SAP' in CMC's Authendication (not the login). So now I can assume it's because BO Integration Kit only supports BO XI 3.0 and consider it solved?
However, I still get the same error as my 1st post:
3. I was able to create a new connection in Designer to connect to SAP BW, and select one of the existing cubes. After uploading the Universe, I created a new Web Intelligence document and dragged couple of objects into Result Objects. After clicking Run Query, I get the following:
A database error occured. The database error text is: The MDX query SELECT { Measures.0BBP_BILITM } ON COLUMNS FROM $0BBP_C01 failed to execute with the error See RFC trace file or SAP system log for more details. (WIS 10901)
or
A database error occured. The database error text is: The supplied XML is not valid. [0COMP_CODE].[LEVEL00]. (WIS 10901)
Any ideas?
David -
SOAP API integration problem with OIM 11g R1
Hi,
We're facing a problem when we are attempting to provision for a third party Web Service application in OIM 11g R1.
During development and test running in an IDE environment, JDeveloper, the soap wsdl requests are triggered and a response is received successfully. However, when we shift the work and integrate it with OIM using design console, there seems to be an error indicating an invalid wsdl location. We have used the super class Exception, in try-catch block for handling of the exceptions. Please see the log message.
Xl Home Dir :/oracle/Middleware/Oracle_IDM1/server
Running CREATEUSERTASK
Target Class = org.identityconnectors.Provisioning.QuickShareUserProvisioning
URL : XXXXX
User ID : XXXX
Password : XXXX
ERROR: Invalid wsdl location robi/XXXX_saved_wsdl.wsdl
When we simply run the jar file from the command line, it gives us, java.lang.NoClassDefFoundError: javax/xml/rpc/Service
[oracle@idmlab JavaTasks]$ java -jar archive1.jar
URL : XXXXX
User ID : XXXX
Password : XXXX
Exception in thread "main" java.lang.NoClassDefFoundError: javax/xml/rpc/Service
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at org.identityconnectors.Provisioning.QuickShareUserProvisioning.createUser(QuickShareUserProvisioning.java:41)
at org.identityconnectors.Provisioning.QuickShareUserProvisioning.main(QuickShareUserProvisioning.java:215)
Caused by: java.lang.ClassNotFoundException: javax.xml.rpc.Service
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 14 more
Any help or suggestion, appreciated!
Thanks
Tamim KhanHi Kevin,
Thanks a lot for the response. But, when i deployed the composite SAR in to the server from Jdeveloper, i checked the option to "Overwrite any existing composite with same revision ID". SO, i used the same revision ID (Say 1.0), will this also need to be disabled?
Thanks,
Srini -
Adobe Reader X - Firefox integration Problem
Dear All,
My first post here.
I am having problem's with the Adobe Reader X integration with Firefox (v3.6.12). I have been using Adobe Reader always and it's been fine.
But I installed the new Adobe Reader X, and it integrates with firefox well, PDF document's open well within the browser.. BUT, I cannot save the PDF document from within the pdf.. I cannot click anywhere on the toolbar.. I cannot click on the pop up toolbar as well (the black one).. When i press F8, I can restore the toolbar or make it disappear.. but that's all I can do..
If I try to save the document from firefox file menu, it works.. but not from within the pdf...
This problem is also seen in IE, as well.
I have tried repairing the install and also uninstall / reinstall adobe reader X. But nothing worked..
For more info., I have been discussing this issue here > http://forum.notebookreview.com/windows-os-software/534412-adobe-reader-x-available-3.html
I am looking forward to resolving this soon, because I use / read / work with hundreds and thousands of PDF, and they are extremely essential for my research work.. as some might know, all research articles are in PDF format these days..
Thanks in advance and best wishes,
Cheers, fondueMy replies are in Bold.
Thank you for your response and message.
1. Are you seeing this problem with all kinds of PDF's or some specific kinds like secure PDF's (with doc open password or printing restrcitions), reader extended PDF's or PDF forms.
This problem is with all kind's of PDF's.
2. Are you opening a locally saved PDF by doing a drag drop in the browser or right click and open with IE/FF or directly opening a PDF hosted on the internet?
It doesn't matter. However I do it, I see this problem in Firefox, IE & Google Chrome.
3. Can you also check the version of the Reader X browser plugin? you could find it at C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll. Right click -> Properties -> Details
If version is 9.0.x then you could try a clean install of Reader X.
I have checked it. It's the latest plug-in (though at the moment, I have gone back to Adobe Reader 9.4.1, as I've mentioned before, because I need the reader to be working fine for my work and daily life. I am just waiting for a fix before I try Adobe Reader X again.
As I've mentioned before, I am seeing this issue ONLY on my Windows 7 Ultimate (Laptop). In the desktop's at work, with Windows XP / Vista, I don't see it. Adobe Reader is working fine, browser integration is fine, the floating tool bar works fine, the right click menu pop' up where the right click is done...I can also save PDF' from the main toolbar at the top and so on...
I really have run out of ideas.... and I am very surprised that no expert support personnel (if at all there is one) have dropped by or said anything or mentioned anything about this.
Anyway.... Cheers. -
I deployed one pl/sql web services using jdeveloper10g to oc4j. within this webservices, there are two operations which reture two set of xml data.
For each operation call, the biztalk server need to validate against xsd files that we provide to them.
Here are the problems:
1. The xsd was generated from database. but in the soap body, there are two extra tags being added by (see below)
<env:Body>
<ns0:getSuppliersCsResponseElement>
<ns0:pdatasetOut><SUPPLIERS><SUPPLIER><SUPPLIER_ID>6144</SUPPLIER_ID><SUPPLIER_NAME>Botanica</SUPPLIER_NAME>
<SUPPLIER_LAST_MODIFIED>2006-01-22</SUPPLIER_LAST_MODIFIED><JI_OWNED>1</JI_OWNED><BRANDS_EXCLUSIVE_TO_JI></BRANDS_EXCLUSIVE_TO_JI><LIBRARIES><LIBRARY><LIBRARY_ID>5514</LIBRARY_ID><LIBRARY_NAME>Botanica</LIBRARY_NAME><LIBRARY_TYPE>Rights Managed</LIBRARY_TYPE><LIBRARY_LAST_MODIFIED>2005-09-01</LIBRARY_LAST_MODIFIED><RESTRICTIONS><WEBSITE><WEBSITE_ID>2</WEBSITE_ID><WEBSITE_NAME>PictureQuest</WEBSITE_NAME><COUNTRY_CODES><ISO3>ABW</ISO3><ISO3>AND</ISO3></COUNTRY_CODES></WEBSITE></RESTRICTIONS></LIBRARY></LIBRARIES></SUPPLIER></SUPPLIERS></ns0:pdatasetOut>
</ns0:getSuppliersCsResponseElement>
</env:Body>
there two <ns0:getSuppliersCsResponseElement> and <ns0:pdatasetOut> are not in my original xsd file. so biztalk returned failure when it validate message body. Shall I change me xsd to add these two or there is anyway doing this?
2. I have two operations with different xsd files. How to attach correct or both xsd files within the soap message? or can i do something with WSDL file to inclulde two schemalocations?
3. the soap body can be over 100MB big. How to streaming the message?The following is the WSDL file generated by Jdeveloper
<definitions
name="tt"
targetNamespace="http://webdevdb/Tt.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://webdevdb/Tt.wsdl"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://webdevdb/Tt.wsdl"
elementFormDefault="qualified" xmlns:tns="http://webdevdb/Tt.wsdl" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap12-enc="http://www.w3.org/2003/05/soap-encoding">
<element name="getRfitemsCsElement" type="decimal" nillable="true"/>
<element name="getRfitemsCsResponseElement" type="tns:TtUser_getRfitemsCs_Out" nillable="true"/>
<complexType name="TtUser_getRfitemsCs_Out">
<sequence>
<element name="pdatasetOut" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="getSuppliersCsElement" type="string" nillable="true"/>
<element name="getSuppliersCsResponseElement" type="tns:TtUser_getSuppliersCs_Out"
nillable="true"/>
<complexType name="TtUser_getSuppliersCs_Out">
<sequence>
<element name="pdatasetOut" type="string" nillable="true"/>
</sequence>
</complexType>
</schema>
</types>
<message name="Tt_getRfitemsCs">
<part name="parameters" element="tns:getRfitemsCsElement"/>
</message>
<message name="Tt_getRfitemsCsResponse">
<part name="result" element="tns:getRfitemsCsResponseElement"/>
</message>
<message name="Tt_getSuppliersCs">
<part name="parameters" element="tns:getSuppliersCsElement"/>
</message>
<message name="Tt_getSuppliersCsResponse">
<part name="result" element="tns:getSuppliersCsResponseElement"/>
</message>
<portType name="tt">
<operation name="getRfitemsCs">
<input message="tns:Tt_getRfitemsCs"/>
<output message="tns:Tt_getRfitemsCsResponse"/>
</operation>
<operation name="getSuppliersCs">
<input message="tns:Tt_getSuppliersCs"/>
<output message="tns:Tt_getSuppliersCsResponse"/>
</operation>
</portType>
<binding name="ttSoap12Http" type="tns:tt">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="getRfitemsCs">
<soap12:operation soapAction="http://webdevdb/Tt.wsdl/getRfitemsCs" soapActionRequired="false"/>
<input>
<soap12:body use="literal"/>
</input>
<output>
<soap12:body use="literal" parts="result"/>
</output>
</operation>
<operation name="getSuppliersCs">
<soap12:operation soapAction="http://webdevdb/Tt.wsdl/getSuppliersCs" soapActionRequired="false"/>
<input>
<soap12:body use="literal"/>
</input>
<output>
<soap12:body use="literal" parts="result"/>
</output>
</operation>
</binding>
<service name="tt">
<port name="ttSoap12HttpPort" binding="tns:ttSoap12Http">
<soap12:address location="http://192.168.10.151:8888/Application2-proj1-context-root/ttSoap12HttpPort"/>
</port>
</service>
</definitions> -
WSDL validation problem with WS-I
I created a WSDL with jDeveloper 10.1.3.2 following the Oracle Tutorial
http://www.oracle.com/technology/obe/obe1013jdev/wstopdown/wstopdown.htm
At the point where i have to validate the WSDL with the WS-I tester i get an error message:
Assertion: BP2701
The wsdl:definitions namespace is not: http://schemas.xmlsoap.org/wsdl/
All the entrys inside teh WSDL are written from jdeveloper.
the output WSDL looks like:
<definitions targetNamespace="urn:CreditRating"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:CreditRating"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:types="http://CreditRating.xsd">
<types>
<schema targetNamespace="http://CreditRating.xsd"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<element name="ssn" type="string"/>
<element name="rating" type="int"/>
<element name="error" type="string"/>
</schema>
</types>
<message name="CreditRatingRequestMessage">
<part name="ssn" element="types:ssn"/>
</message>
<message name="CreditRatingResponseMessage">
<part name="rating" element="types:rating"/>
</message>
<message name="CreditRatingFaultMessage">
<part name="error" element="types:error"/>
</message>
<portType name="CreditRating">
<operation name="processCreditRating">
<input message="tns:CreditRatingRequestMessage"/>
<output message="tns:CreditRatingRequestMessage"/>
<fault message="tns:CreditRatingFaultMessage" name="negativCredit"/>
</operation>
</portType>
<binding name="CreditRatingSoapHttp" type="tns:CreditRating">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="processCreditRating">
<soap:operation soapAction="urn:CreditRating/processCreditRating"/>
<input>
<soap:body use="literal" parts="ssn"/>
</input>
<output>
<soap:body use="literal" parts="ssn"/>
</output>
<fault name="negativCredit">
<soap:fault use="literal" name="negativCredit"/>
</fault>
</operation>
</binding>
<service name="CreditRatingService">
<port name="CreditRatingServiceSoapHttpPort"
binding="tns:CreditRatingSoapHttp">
<soap:address location="tbd"/>
</port>
</service>
</definitions>
I can not see where the porblem is. Can someone help me please?
Tanks BsHi ,
there is not any problem in code or in function.
You just need to double click on Excel field where you are having that problem of ####.
Whenever display size of cell is less then the data size then it's showing as ###. so you just need to double click on it and make it as per data length...
-Maharshi
Maybe you are looking for
-
Greetings, I have an OEL5 system that I am trying to "fix". Im not sure my issue can be "fixed", but I would like the advice of the community. I have exhausted all my resources trying to work this problem. Any adcie would be appreciated. I have a the
-
How to get the dID of any Content from SS_DATAFILE in Site Studio 10gR4?
Hi, I am trying to get the dID of a Contributor Data File from its dDocName (SS_DATAFILE). I can do a search based on this Content ID but if I am able to get the dID using one of the Site Studio variables, it will be great. Thanks, Justin
-
Use Aggregate Functions in a View
Is it possible to create a view in SE11 using an aggregate SQL function? I.e., I want the generated SQL to look like: CREATE VIEW z_tbl A, SUM_AMT AS SELECT A, SUM(AMT) FROM TBL GROUP BY A Thanks for any help.
-
Hello All, Please Can any one send me the R12 AP Trial Balance Query, Its Very urgent. Thanks in Advance Regards, Muthu [email protected]
-
I forgot my passcode, how can i enter my ipad ????
i forgot my ipad passcode, so i searched the net looking for a solution but none of them worked even that one which include connecting the ipad to pc itunes and resetting it !!!!!! im really helpless, wt can i do to re-enter my ipad !!!!!!!!!!!!!!!!!