Combined code and design view broken

I use Dreamweaver MX 2004 and normally work in the "split"
(code and design) view. I just opened a site to work on it and that
mode does not work - I click on the link in the toolbar, but it
does not take effect. I also cannot make it work from
View-->Code and Design. The individual Code and Design views DO
work so I suspect it's a configuration problem. I checked
Edit->Preferences->Filte Types/Editors, and .html is not
listed in the "open in code view" dialog box. What would cause this
feature to suddenly stop working? I've Googled every conceivable
keyword and phrase to find an answer, without success. Has anyone
else experienced this behavior?

Never mind - figured it out. Duh, do I feel like a dummy! I
had apparently dragged the bottom border of the code window all the
way down, so the design view was hidden. Sorry!

Similar Messages

Problem with code and design view

When I try to have both the code and design view
side by side in Dreamweaver CS4 on a PC -- I get the html code in both sections.
How do I see the layout while looking at the code?
Thanks for help.
Library Friend

You've probably got View > Split Code checked.
Click View > Code and Design

Dreamweaver Momentarily Freezing When Moving Between Code and Design View

I have Dreamweaver CS4 and have had a problem that just started yesterday. I have rebooted my machine to no avail. The local copy and the live copy of the site are on two different servers that we access through a local network.
Dreamweaver slows to a standstill if I click to another program and then attempt to go back into Dreamweaver or if I switch between design and code view.
I haven't made any changes to Dreamweaver in the way of added extensions or updates. Is it possible that the cause of this could be either a server problem or a connectivity to the server problem?
Many thanks in advance for any help you could provide.
Andy

You can use CTRL+# to switch between Code and Design View.
By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

Protecting code from design view?

Can you configure the tag pattern that tells Dreamweaver to
"leave this code alone in design view"?
Dreamweaver does a good job of respecting code blocks (PHP,
ASP, whatever) in design mode. However, we're going to have some
people develop Smarty templates with Dreamweaver, so I need to
specify the tag pattern of stuff that should only be accessible in
code view.
Is this possible?

I found out how to do this. Open
"configuration/ThirdPartyTags/Tags.xml". Add a new "directive_spec"
tag there, defining the start and end tags. I also specified an
icon to replace the code in design view.
Works beautifully.

DW 2014.1 keyboard shortcuts for "Code and Design" gone

Option has disappeared for setting keyboard shortcuts specifically for "Code and Design" (or plain Design either, for that matter)? Split Code option just gives you two code windows and all the other options in Shortcuts are for Live View, not Design view.

Alt-F11 does not help me in this situation because you still cannot toggle between showing Code and Design versus all Code, or all Design. Live options have replaced Design options, but even then, you cannot make a shortcut for Code and Live (though it's available in the View menu). This screen shot shows what has disappeared.
Again: Ctl + ` does not toggle the VIEW, it toggles the active PANE.

Anyway to have source code html, design view and CSS open windows at the same time?

Hi all,
Is there anyway I can keep design view, source code AND css open on screen all at the same time?
Constantly clicking between source and css is really becoming irritating, would be so much easier if they were both on screen at the same time.
Any help would be great

You have two choices.
1 You can go to preferences>general and the very first item (in CS6) is "open document in tabs" if you deselct that then you can view your page in split view and also open up the CSS file and have it visible as well.
2 If you use tabs you can view the page in split view and open the CSS file and then detach the css from the tab and it will be an idependent item. You detach it by highlighting the tab and then dragging it down.
It helps to have a large screen, and better still to have more than one screen, you can put the css on the other screen.
VL Branko

Code hints and Design view preview missing

Using FB with Flex sdk 3.3 and AFCS SDK 0.91. I installed the
SDK per the instructions in the ACFS dev guide. I then added the
FP9 afcs.swc to my project build path and compile for fp 9.0.124
The sample apps do compile and run.
However
1. I am getting no code hinting for the acfs classes
2. IN design view, the components show as white rectangles
with red x's and obscure the flex components
3. The design view>components view, the acfs folder is
empty, while the "custom" folder is full of acfs components.
Any idea as to what might be incorrect?
Thanks,
Will

Hi Will,
I think it turns out we made a slight error in the dev guide
in the setup instructions - we mention that you should link the
AFCS source into your project in order to debug. Unfortunately this
seems to override the useful metadata baked into the SWC which
makes the SDK work with FB more seamlessly.
Advice : Remove the source path, then go to the library
path. Where you see AFCS.swc, expand it and select "source
attachment". Hit the edit button and add the source path there.
This seems to do the trick, allowing you to debug into the code
without overriding the swc itself.
We'll get the docs fixed up to reflect this better way to
set up the SDK.
thanks
nigel

Is design view broken in DW CC 2014.1?

i open an html file to edit it
sometimes DW design view shows the styles in the doc
sometimes DW design view doesn't show the styles in the doc
...if DW happens to be showing the styles, that sometimes lasts for a while and stops.
i don't know if DW is stripping code -- insisting on some new "design principles" advocated by the lovely people who deprecated the center tag -- or if DW design view is just broken -- or what.
can you fill me in?

Usually what you describe is caused by html errors in your code. Run your page through the validator at http://validator.w3.org and clean up any errors found.
If you're working with clean code and the problem persists, post a link to your page here so we can take a look at what's going on.

Design view broken in CS5

In the last week or so, Design view in CS5 has become completely broken for me.
I usually use Code View, but sometimes it's handy to switch to Design view or Split view, which are now always grayed out.
I had installed the HTML 5 pack, not sure if that would cause the issue or not. I completely removed it, but the other views are still grayed out.

Long shot:
-> Dreamweaver menu
-> Preferences
-> File Types / Editors
What file types are listed in "Open in Code View"?
I believe file types listed there open with Design & Split View disabled.
Alternatively, try deleting your personal config folder and let DW re-build it.
Locating your personal configuration folder
http://forums.adobe.com/thread/494812

JSF Design view broken, showing tags as blocks instead of preview

I'm using jDev Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1
but this has happened to me several times before with previous versions of jDev.
All of the sudden after restarting jDev the design view for all my jsf pages look broken, showing only tag blocks, and not the design view it was showing previously. Why is this? what happened?
The only fix I found on this forum was to remove the system directory (should be somewhere like: C:\Documents and Settings\yourUser\Application Data\JDeveloper\system11.1.1.3.37.56.60 ) and let jDev create a new one. But then I have to reconfigure everything again, which can be frustrating.
Can anyone explain what's going on here, and if there's a better way to fix my jDev when this happens?
Edited by: tnology on 14-Nov-2012 13:37

Thanks, so these are the messages I am getting in Design view, anyone know what it means? :
Nov 14, 2012 3:31:52 PM oracle.security.jps.util.JpsUtil disableAudit
INFO: JpsUtil: isAuditDisabled set to true
Nov 14, 2012 3:32:00 PM oracle.jdevimpl.webapp.faces.config.modelimpl.FacesConfigHandler setIsMetadataComplete
INFO: jar:file:/C:/Oracle/Middleware23/jdeveloper/jlib/bundleresolver.jar!/META-INF/faces-config.xml metadata-complete undefined (false)
Nov 14, 2012 3:32:02 PM oracle.bali.xml.share.WeakListenerManager addListener
WARNING: Tried to add listener that was already attached: listener=oracle.jdevimpl.webapp.grammar.DelegatingGrammarProvider$IdenticalGrammarEventPercolator@185d004source=oracle.jdevimpl.webapp.jsp.libraries.JspLibraryMetadataGrammarProvider@35b0c9
Nov 14, 2012 3:32:04 PM javax.faces.FactoryFinder$FactoryManager getFactory
SEVERE: Application was not properly initialized at startup, could not find Factory: javax.faces.context.FacesContextFactory. Attempting to find backup.
WARNING: Unable to initialize <servlet> Faces Servlet. Check project libraries configuration.
java.lang.IllegalStateException: Could not find backup for factory javax.faces.context.FacesContextFactory.
     at javax.faces.FactoryFinder$FactoryManager.getFactory(FactoryFinder.java:996)
     at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:331)
     at javax.faces.webapp.FacesServlet.init(FacesServlet.java:219)
Nov 14, 2012 3:32:06 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:06 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: unavailable.

Flash Builder 4.7 and design view question

I have programmed a large, commercial level mobile application using Flash Builder 4.6. It is working GREAT when ran on both iOS and Android devices.
I was using the trial version of Flash Builder 4.6 to develop this application. I used the states feature that FB has built in to handle Portrait, Landscape, and Phone / Tablet configs. This means that I built 4 different layouts for all 8 of my views in my mobile application. Using the design view in FB 4.6 was what allowed me to do this.
I have to say that I LOVE Flash Builder so far. GREAT tool.
My trial ended just last week. I had to purchase version 4.7 of the software, only to find out that they REMOVED the design view from the software.
All complaining aside, what have other programmers who are in the same boat as me done as a solution? I would like to continue to program in AS and Flash Builder as I have taken the time to write the application and learn the whole platform.
As it stands now, I am in the process of downgrading my liscence keys from 4.7 to 4.6, but in order to do this I had to RETURN my retail version of FB 4.7 premium (bought online) and buy a volume liscening version (NOT through adobe, only allowed to do this through a reseller such as CDW). then once I have a key for 4.7 through volume liscencing, it can be downgraded to 4.6.
I'm hoping to get input from others in the same boat. Did you change Programming languages? if so, to what? Did you change IDE's? If so, to what?

Joe -
     I actually never completed the downgrade to 4.6 so I've been using 4.7 without the design view.    In 4.6, I would put a control on the view within design view. Then I would change each state, move it around, and it would be placed that way. In my case, each view has 4 states - portraitPhone, landscapePhone, portraitTablet, and landscapeTablet.   I had to do this 4 times for each control under 4.6
     So I went back and looked at my code in 4.7 and all the resulting code was these explicit x, y, height, and width values. See the code below:
<s:states> <s:State name="portraitPhone" stateGroups="phone,portrait"
/>
<s:State name="landscapePhone" stateGroups="phone,landscape"/>
<s:State name="portraitTablet" stateGroups="tablet,portrait"/>
<s:State name="landscapeTablet" stateGroups="tablet,landscape"/>
</s:states>
<s:List id="lstMake" x="10" y="19" height="25%" allowMultipleSelection="false"borderVisible="
true" click="changeMake(event)" labelField="label"width.landscapePhone="
295" height.landscapePhone="105"x.landscapeTablet="
25" y.landscapeTablet="54" width.landscapeTablet="461"height.landscapeTablet="
292" fontSize.landscapeTablet="24"width.portraitPhone="
182" height.portraitPhone="175"x.portraitTablet="
16" y.portraitTablet="35" width.portraitTablet="399"height.portraitTablet="
360" fontSize.portraitTablet="24">
<s:dataProvider>
<s:ArrayList id="makeCollection">
<fx:Object label="Cadillac" data="18"/>
<fx:Object label="Chevrolet" data="1"/>
<fx:Object label="Dodge" data="2"/>
<fx:Object label="Ford" data="3"/>
<fx:Object label="GMC" data="4"/>
<fx:Object label="Isuzu" data="6"/>
<fx:Object label="Jeep" data="7"/>
<fx:Object label="Licoln" data="8"/>
<fx:Object label="Mazda" data="9"/>
<fx:Object label="Mercury" data="10"/>
<fx:Object label="Nissan" data="11"/>
<fx:Object label="Oldsmobile" data="12"/>
<fx:Object label="Sterling" data="20"/>
<fx:Object label="Suzuki" data="13"/>
<fx:Object label="Toyota" data="14"/>
</s:ArrayList>
</s:dataProvider>
</s:List>
<s:Label x="10" y="8" fontSize="11" text="Vehicle Make"x.landscapeTablet="
10" y.landscapeTablet="23" fontSize.landscapeTablet="24"fontSize.portraitTablet="
24"/>
<s:Label x="143" y="11" fontSize="11" text="Vehicle Year"x.landscapePhone="
354" y.landscapePhone="10"x.landscapeTablet="
517" y.landscapeTablet="23" width.landscapeTablet="143"height.landscapeTablet="
26" fontSize.landscapeTablet="24"x.portraitPhone="
204" y.portraitPhone="8"x.portraitTablet="
446" y.portraitTablet="11" fontSize.portraitTablet="24"/>
<s:List id="lstYear" x="145" y="20" height="25%" allowMultipleSelection="false"borderVisible="
true" click="doYearChange(event)" dataProvider="{yearCollection}"labelField="
value"x.landscapePhone="
313" y.landscapePhone="19" width.landscapePhone="157"height.landscapePhone="
105"x.landscapeTablet="
524" y.landscapeTablet="54" width.landscapeTablet="343"height.landscapeTablet="
292" fontSize.landscapeTablet="24"x.portraitPhone="
200" y.portraitPhone="19" height.portraitPhone="194"x.portraitTablet="
453" y.portraitTablet="37" width.portraitTablet="276"height.portraitTablet="
358" fontSize.portraitTablet="24">
</s:List>
<s:List id="lstModel" x="10" y="147" height="30%" borderVisible="true"dataProvider="
{modelCollection}" labelFunction="lblFunct"width.landscapePhone="
460" height.landscapePhone="99"x.landscapeTablet="
13" y.landscapeTablet="384" width.landscapeTablet="992"height.landscapeTablet="
309" fontSize.landscapeTablet="24"x.portraitPhone="
10" y.portraitPhone="221" width.portraitPhone="301"height.portraitPhone="
184" allowMultipleSelection="false"click="doModelSelected(event)" fontSize.portraitPhone="
12"x.portraitTablet="
16" y.portraitTablet="428" width.portraitTablet="742"height.portraitTablet="
521" fontSize.portraitTablet="24"></s:List>
<s:Label x="12" y="132" fontSize="11" text="Vehicle Model"x.landscapeTablet="
10" y.landscapeTablet="354" fontSize.landscapeTablet="24"x.portraitPhone="
10" y.portraitPhone="207"x.portraitTablet="
10" y.portraitTablet="401" width.portraitTablet="154"height.portraitTablet="
21" fontSize.portraitTablet="24"/>
So instead of continuing to try and modify these values by hand, then run the program, using trial and error, I took a different tact.   I removed ALL x y height and width values. Then, I wrapped all the mxml code in either <s:HGroup or <s:Vghroup tags depending on what I wanted. Then I would just set the vertical and horizontal align on these groups. This allows everything to scale correctly based on the size of the view (each device really is a little different).   Finally, I hand entered things like font sizes by using State Groups like this:   fontSize.phone="12" fontSize.tablet="22".    It still took testing on the screen to see how my layouts worked but it just makes the UI so much easier to change around and works so much better with out all the static stuff in it.
If you have some time , I would suggest taking one of your 4.6 views that has all these static variables and trying to modify it to work like I said above.    My modified code (to do the same thing as above) is below:
<s:states> <s:State name="portraitPhone" stateGroups="phone,portrait"
/>
<s:State name="landscapePhone" stateGroups="phone,landscape"/>
<s:State name="portraitTablet" stateGroups="tablet,portrait"/>
<s:State name="landscapeTablet" stateGroups="tablet,landscape"/>
</s:states>
<s:VGroup height="100%" width="100%" verticalAlign="top">
<s:HGroup paddingTop="10" width="100%" height="50%">
<s:VGroup width="60%" paddingLeft="5">
<s:Label fontSize="11" text="Vehicle Make"fontSize.tablet="
24"/>
<s:List id="lstMake" width="100%" allowMultipleSelection="false"borderVisible="
true" click="changeMake(event)" labelField="label"fontSize.tablet="
24" fontSize.phone="12">
<s:layout>
<s:VerticalLayout horizontalAlign="contentJustify" requestedMaxRowCount.portraitTablet="8" requestedMaxRowCount.phone="6" requestedMaxRowCount.landscapeTablet="4"gap="
0" rowHeight.phone="28" variableRowHeight="false" rowHeight="55"verticalAlign="
middle"/>
</s:layout>
<s:dataProvider>
<s:ArrayList id="makeCollection">
<fx:Object label="Cadillac" data="18"/>
<fx:Object label="Chevrolet" data="1"/>
<fx:Object label="Dodge" data="2"/>
<fx:Object label="Ford" data="3"/>
<fx:Object label="GMC" data="4"/>
<fx:Object label="Isuzu" data="6"/>
<fx:Object label="Jeep" data="7"/>
<fx:Object label="Lincoln" data="8"/>
<fx:Object label="Mazda" data="9"/>
<fx:Object label="Mercury" data="10"/>
<fx:Object label="Nissan" data="11"/>
<fx:Object label="Oldsmobile" data="12"/>
<fx:Object label="Sterling" data="20"/>
<fx:Object label="Suzuki" data="13"/>
<fx:Object label="Toyota" data="14"/>
</s:ArrayList>
</s:dataProvider>
</s:List>
</s:VGroup>
<s:VGroup width="30%">
<s:Label fontSize="11" text="Vehicle Year"fontSize.tablet="
24"/>
<s:List id="lstYear" width="100%" allowMultipleSelection="false" borderVisible="
true" click="doYearChange(event)" dataProvider="{yearCollection}"labelField="
value" fontSize.phone="12" fontSize.tablet="24">
<s:layout>
<s:VerticalLayout horizontalAlign="contentJustify" requestedMaxRowCount.portraitTablet="8" requestedMaxRowCount.phone="6" requestedMaxRowCount.landscapeTablet="4"gap="
0" rowHeight.phone="28" variableRowHeight="false" rowHeight.tablet="55"verticalAlign="
middle"
/>
</s:layout>
</s:List>
</s:V

Hiding code in Design View

New to DW CS3
I have Vista Buttons generated and placed into a table.
Instead of just showing the menu graphics, I also see all the
text of the
menus in my Design View in DW.
How can I create this so that the table containing the menus
does not expand
and only shows the buttons, not the text for the javascript
behind the
buttons?
Thank you

On 19 Aug 2008 in macromedia.dreamweaver, James Musser wrote:
> I have Vista Buttons generated and placed into a table.
> Instead of just showing the menu graphics, I also see
all the text
> of the menus in my Design View in DW.
Uh... What's a 'Vista Button'?
> How can I create this so that the table containing the
menus does
> not expand and only shows the buttons, not the text for
the
> javascript behind the buttons?
Could you post a link to the page so we can see the code?
Thanks!
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

Split Code and Design will not stay

I like the classic design with the split screen code on top and design on the bottom. Somehow I have gotten it where it will also come up in code, the splot and design are greyed out. I can force it to split with the layout, and I save this as a template. But whenever I bring up a new page, I either have to reset the template or hit layout to force the split. Very annoying.
I have looked all over and I cannot see a setting. Live view/Live code are off, in fact greyed out. I just tried to reload the software completely and this did not reset it.

I opened a case to Support, and they fixed it. I needed to delete the Configuration file and then edit the regedit, removing the CS4 entry. I did not have much in the way of customization,so it was not a big deal.
My thanks to the Suport Team.
Re-create the Dreamweaver preferences folder to eliminate problems that
a damaged preferences files might cause.
Note: When you use this solution, Dreamweaver will create a new
preferences folder and you will lose custom settings associated with
your current preferences file. However, the folder you rename in step 2
is your original preferences file. If you determine that the preferences
files is not causing the problem, then you can restore your custom
settings by following the instructions below.
Disclaimer: This procedure involves editing the Windows registry. Adobe
doesn't provide support for editing the registry, which contains
critical system and application information. Make sure to back up the
registry before editing it. For more information about the registry, see
the Windows documentation or contact Microsoft.
To re-create the Dreamweaver preferences file:
1. Quit Dreamweaver.
2. Rename the Configuration folder (for example, Configuration old)
in the "\Users\[user]\AppData\Roaming\Adobe\Dreamweaver CS4\(
installation language)\" folder.
3. Choose Start > type regedit, then press Enter, and click Continue
for the next dialog box. (note, this did not work in Win 7, had to get help to find new regedit).
4. Browse to the following location:
HKEY_CURRENT_USER\Software\Adobe\Dreamweaver CS4 and delete the whole
Dreamweaver CS4 folder then close the registry editor.
5. Start Dreamweaver. Dreamweaver creates a new preferences file.
If the problem continues, then the preferences file isn't the cause. To
restore custom settings, delete the new preferences file and restore the
original name of the previous preferences file.

Virtual includes and design view

I am working on a redesign of our Intranet and have found a
weird problem
with the includes that I am trying to use. Our Intranet is
located at
http://swvtc06/swvtc (I understand
that no one will be able to see it), the
swvtc is a virtual directory in IIS. If I code my includes
like this,

Then I can see the included file in Dreamweaver, but when I
execute the
page, it gives me an error, "Include file not found". So I
must change the
include code to,

in order for the code to work properly. This however removes
the included
file from the design view.
Am I missing something in the site setup?
Thanks,
Drew

Drew
Unless you are running off a properly configured IIS server
it is often
better to use FILE includes rather than Virtuals. The issue
is that your
intranet has been hung as a virtual directory off the default
website found
at localhost.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Drew" <[email protected]> wrote in message
news:ekpmrn$dq2$[email protected]..
>I am working on a redesign of our Intranet and have found
a weird problem
>with the includes that I am trying to use. Our Intranet
is located at
>
http://swvtc06/swvtc (I understand
that no one will be able to see it), the
>swvtc is a virtual directory in IIS. If I code my
includes like this,
>
> 
>
> Then I can see the included file in Dreamweaver, but
when I execute the
> page, it gives me an error, "Include file not found". So
I must change
> the include code to,
>
> 
>
> in order for the code to work properly. This however
removes the included
> file from the design view.
>
> Am I missing something in the site setup?
>
> Thanks,
> Drew
>

3rd party tags and design view customization

I know that Dreamweaver allows me to replace third party tags
with images in design view. My question is can I make my jsp widget
tags look dependent on attributes of that tag?
And why can’t I say that my <widget:suggestionBox
… size=”10” /> should look like a <input
size=”10” /> in design view?
Are there plans to support this long overlooked functionality
in the near future?

Well I am sure you wrote in good faith and I appreciate
anybodys help . However, I do not want to be rude, but if you have
nothing to say, than please don't post something useless. I am sure
there are many areas where you can post real solutions.
Of course DW works nicely with xsl in design view. My problem
was finally answered in another thread, I hope that link works.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=190&threadid=1266443&fo rumid=12
I mark this as the answer, so everybody with that problem
knows where the solution is.
Joe

Combined code and design view broken

Similar Messages

Maybe you are looking for