Command Line Support Not Working in OSD

I am trying to deploy an image to a dell optiplex 760. I have added all of the storage and nic drivers from Dell's WINPE package, and then all of the drivers from the Intel site for the nic to my boot image. I then enabled command line support on the boot
image, after all of this I updated the boot image on my DP. When the SCCM splash screen comes up it says loading network, and then all dialog boxes disappears and the machine reboots. During this time when i press F8 nothing happens. I get no command
prompt window, and it doesnt pause the reboot. Any Ideas?

Sorry for my ignorance, when you say you installed every driver in there are you referring to adding them to the driver database or to your bootwim. Also if you cant grab the logs you might be able to get a report based on an unknown system, look in reporting
under "History of a task sequence deployment on a computer" if there was anything recorded before it bombed out you might be able to get some info.
Im still leaning towards a network driver though, can you snap an image of the drivers you have loaded into your preferred bootwim.

Similar Messages

Java command line purge not working after applying MLR 10

Hi Gurus,
After applying the latest patch MLR 10,
java command line purge does not seem to work. I'm using the command
java -ms1024M -mx1024M oracle.tip.repos.purge.PurgeManager purgeRuntime -start 07-APR-2009 -end 22-MAY-2009 Complete
Before running the command i have set the environment using setenv.bat present in ip\install directory.
Below error is observed when trying to purge the messages
java -ms1024M -mx1024M oracle.tip.repos.purge
.PurgeManager purgeRuntime -start 07-APR-2009 -end 22-MAY-2009 Complete
Purge started, please wait...
Purge failed
Error -: AIP-11016: SQL error: java.sql.SQLException: ORA-06550: line 1, colum
n 7:
PLS-00905: object B2B.PURGE_RUNTIME is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.tip.repos.purge.PurgeManager.main(PurgeManager.java:1454)
Caused by: java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00905: object B2B.PURGE_RUNTIME is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:124)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.
java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableS
tatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:1085)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePrep
aredStatement.java:2983)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar
edStatement.java:3056)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallab
leStatement.java:4295)
at oracle.tip.repos.purge.PurgeManager.main(PurgeManager.java:1449)
Kindly let me know if any post install scripts needs to be run ?
Or is there any thing else i have missed.
Thanks in advance,
Regards,
Cema
Edited by: Cema on May 22, 2009 12:14 PM

Hi Cema,
In MLR 10 these two bugs have been added with others (you can see in patch read me file)-
8432093 - AUTOMATE THE POST PATCH INSTRUCTION SCRIPTS FROM MLR 10 ONWARDS
8339176 - B2B PURGE_RUNTIME PROCEDURE DOES NOT DELETE ALL TIP_WIREMESSAGE_RT RECORDS
Bug 8432093 tells clearly that there is no need of running any post installation script from MLR 10 onwards, so you have not missed anything like post installation script.
Bug 8339176 has addressed the PURGE_RUNTIME functionality for deleting messages. From your earlier posts it seems that you got some errors while applying this patch. Please make sure that patch is successfully installed on your system.
Regards,
Anuj

Windows 7 Defrag from command line does not work

We are running Windows 7 in a virtualized environment. When running windows defrag using schedule or from command line, it does not work. The command that I am executing as administrator is
C:\Windows\system32>defrag /c
Microsoft Disk Defragmenter
Copyright (c) 2007 Microsoft Corp.
It displays the above message and exits back to the command prompt. However if I run the command defrag C: it does work. Defragmenting from the GUI works as well as long as both the disks (C: and System Reserved) are selected and when I click on
Defragment disks, works fine.
I am concerned about defrag running from the task scheduler with the command "defrag /c" (auto scheduled using Configure Schedule... from Disk Defragmenter) does not work and the system never gets defragmented automatically.
This happens only with some of the windows 7 VM's that we have.
There are no entries in Event Log that point to the defrag (using task scheduler). Any ideas what may be going on?

Hi,
Could you defrag as below method:
1. Open Disk Defragmenter by clicking the Start button. In the search box, type
Disk Defragmenter, and then, in the list of results, click
Disk Defragmenter.
2.Under Current status, select the disk you want to defragment.
3.To determine if the disk needs to be defragmented or not, click Analyze disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Once Windows is finished analyzing the disk, you can check the percentage of fragmentation on the disk in the
Last Run column. If the number is above 10%, you should defragment the disk.
4.Click Defragment disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, please read this article:
Ways to improve your computer's performance
http://windows.microsoft.com/en-in/windows/improve-performance-defragmenting-hard-disk#1TC=windows-7
Meanwhile, read this article:
Defrag from the Command-Line for More Complete
Control
http://technet.microsoft.com/en-us/magazine/ff458356.aspx
Karen Hu
TechNet Community Support

HP RGS Command Line options not working as expected

I have a HP RGS Receiver v7.1 installed on my desktop which initiates a remote Session to my RHEL based workstation running HP RGS sender deployed in a LAN. Now when launching the HP RGS Receiver it brings up a window asking for the host name or IP Address of the PC to connect to (in this case the RHEL box). When provided the hostname, the next question asked is the username and the password. When all these detials are provided, the connection is successfully established and all works as expected. I am trying to autolaunch the HP RGS Receiver so I can bypass entering the hostname or ipaddress, username and password during each launch. When reading the usermanual, there is clearly a way of doing this by using the HP RGS commandline autolaunch properties. The property Rgreceiver.Session..IsConnectOnStartup should allow me to setup autolaunch while I provide the hostname,username and password int he following properties: Rgreceiver.Session.n.Hostname Rgreceiver.Session.n.Username Rgreceiver.Session.n.Password Rgreceiver.Session.n.PasswordFormat So it is assumed that when I pass these as command line options while launching the HPRGS executable rgreceiver.exe it should all read the values from the command line and directly establish the connection without me having to enter these details. However it does not seem to work I assume that in n we specify the session number = 1 (because we are working with only a single session) The command Rgreceiver.exe -Rgreceiver.Session.1.IsConnectOnStartup=1 -Rgreceiver.Session.1.Hostname="MyHostName" -Rgreceiver.Session.1.Hostname="MyUserName" -Rgreceiver.Session1.Password="mypassword" -Rgreceiver.Session.1.PasswordFormat=Clear does not seem to have any impact. The HPRGS software behaves the same with or without command line and sending in the commandline does not seem to have any impact on the way it launches neither it gives any error. I have tried to above command line through multiple ways (for e.g. using delimetes and without delimiters, using different values for session number and so on) but it seems Rgreceiever does not even recognize that the commands were given in the first place. I have run out of all options. Any help will be appreciated.

I'm not sure why the command line parameters are not working, but you might want to try to put these same settings into an xxxxx.rgreceiver file. When you double-click the .rgreceiver file, the RGS Receiver will launch with the settings contained in the file. It's worth a try to see if works better for you. (This is described in the RGS User Guide in a section called "Auto-launching connections.") --Keith

Command line mail not working since Server 2.2

Since Mountain Lion, everytime Server.app updates it borks my previous mail settings/hacks/workarounds to the issues with the last version. I just want sendmail, mail, postfix, etc to work and stay working. I even have my own list of stuff to reapply with each Server.app update, but sadly even that has stopped working.
Just basic mail won't even work:
$ mail adam
Subject: test
This is a test mail
⌃D
$ mail
No mail for adam
Here are my current settings.
$ sudo serveradmin fullstatus mail
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 0
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "STOPPED"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "STOPPED"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "ON"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "RUNNING"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "ON"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "RUNNING"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-02-05 16:26:45 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = ""
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-02-05 16:26:45 +0000"

Yes, the ProgramArguments key contains the exact array you posted.
And here is the output for
sudo serveradmin settings mail
mail:postfix:smtpd_pw_server_security_options:_array_index:0 = "cram-md5"
mail:postfix:smtpd_pw_server_security_options:_array_index:1 = "digest-md5"
mail:postfix:smtpd_pw_server_security_options:_array_index:2 = "login"
mail:postfix:smtpd_pw_server_security_options:_array_index:3 = "plain"
mail:postfix:spam_quarantine = "[email protected]"
mail:postfix:smtp_reject_list_enabled = no
mail:postfix:bayes_path = "/Library/Server/Mail/Data/scanner/amavis/.spamassassin/bayes"
mail:postfix:smtp_sasl_auth_enable = yes
mail:postfix:whitelist_from = _empty_array
mail:postfix:submit_cred:XXXXXXX.local:username = "submit"
mail:postfix:submit_cred:XXXXXXX.local:password = "XXXXXXXXXXXXXXXXXXXXXXX"
mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_userid = "[email protected]"
mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_pwd = "XXXXXXXXXXXXXX"
mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_host = "smtp://smtp.gmail.com:587"
mail:postfix:client_permit_mynetworks = yes
mail:postfix:smtpd_tls_cert_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
mail:postfix:maps_rbl_domains_enabled = no
mail:postfix:spam_subject_tag = "***JUNK MAIL*** "
mail:postfix:smtpd_tls_CAfile = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
mail:postfix:message_size_limit_enabled = yes
mail:postfix:virus_db_last_update = "2013-02-06 13:52:18 +0000"
mail:postfix:mail_enabled_groups = _empty_array
mail:postfix:add_whitelist_domain = _empty_array
mail:postfix:virus_scan_enabled = yes
mail:postfix:spam_ok_locales = "en"
mail:postfix:spam_notify_admin_email = "[email protected]"
mail:postfix:black_hole_domains:_array_index:0 = "zen.spamhaus.org"
mail:postfix:virus_db_log_level = "notice"
mail:postfix:spam_scan_enabled = yes
mail:postfix:virus_quarantine = "[email protected]"
mail:postfix:reject_unauth_piplining_enabled = no
mail:postfix:blacklist_from = _empty_array
mail:postfix:spam_rewrite_subject = yes
mail:postfix:message_size_limit = 10485760
mail:postfix:greylist_disable = no
mail:postfix:mynetworks:_array_index:0 = "127.0.0.0/8"
mail:postfix:virus_log_level = "notice"
mail:postfix:host_whitelist = _empty_array
mail:postfix:rbl_override_list = _empty_array
mail:postfix:group_expansion:start_interval = 10
mail:postfix:group_expansion:enable_group_expansion = no
mail:postfix:virus_notify_recipients = no
mail:postfix:luser_relay_enabled = no
mail:postfix:mydomain = "XXXXXXX.local"
mail:postfix:mydestination:_array_index:0 = "localhost"
mail:postfix:virus_notify_admin_email = "[email protected]"
mail:postfix:enable_virtual_domains = yes
mail:postfix:spam_notify_admin = no
mail:postfix:required_hits = 6
mail:postfix:add_whitelist_host = _empty_array
mail:postfix:always_bcc_enabled = no
mail:postfix:enable_var_mail = no
mail:postfix:junk_mail_userid = "junkmail"
mail:postfix:smtpd_tls_key_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
mail:postfix:enable_smtp = yes
mail:postfix:relayhost = "smtp://smtp.gmail.com:587"
mail:postfix:not_junk_mail_userid = "notjunkmail"
mail:postfix:mynetworks_enabled = yes
mail:postfix:spam_ok_languages = "en fr de ja sw ta"
mail:postfix:virtual_domains:_array_index:0 = "imap.gmail.com"
mail:postfix:rbl_override_enabled = no
mail:postfix:log_rolling_days = 1
mail:postfix:enable_smtp_in = yes
mail:postfix:tls_server_options = "use"
mail:postfix:spam_action = "deliver"
mail:postfix:log_rolling_days_enabled = yes
mail:postfix:spam_log_level = "warn"
mail:postfix:smtp_uce_controlls = 1
mail:postfix:relayhost_enabled = yes
mail:postfix:virus_action = "delete"
mail:postfix:virus_db_update_days = 12
mail:postfix:virus_notify_admin = no
mail:postfix:domain_whitelist = _empty_array
mail:postfix:enable_smtp_out = yes
mail:postfix:text_only_attachments = yes
mail:postfix:reject_unknown_client_enabled = no
mail:postfix:log_level = "warn"
mail:postfix:myhostname = "XXXXXXX.local"
mail:global:auto_auth = yes
mail:global:service_data_path = "/Library/Server/Mail"
mail:imap:imap_auth_cram_md5 = yes
mail:imap:srvtab = "/etc/srvtab"
mail:imap:imap_auth_clear = yes
mail:imap:loginuseacl = no
mail:imap:popexpiretime = 0
mail:imap:notifysocket = "/var/imap/socket/notify"
mail:imap:timeout = 30
mail:imap:max_imap_connections = 1000
mail:imap:sieve_maxscripts = 5
mail:imap:logtimestamps = no
mail:imap:quota_enforce_restrictions = no
mail:imap:tls_imap_key_file = ""
mail:imap:mupdate_authname = ""
mail:imap:newsprefix = ""
mail:imap:proxyservers = _empty_array
mail:imap:junk_mail_userid = ""
mail:imap:singleinstancestore = yes
mail:imap:mupdate_password = ""
mail:imap:imap_auth_digest_md5 = yes
mail:imap:tls_cert_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
mail:imap:lmtp_admins = _empty_array
mail:imap:poptimeout = 10
mail:imap:postuser = ""
mail:imap:imap_auth_plain = yes
mail:imap:quota_custom_error = _empty_dictionary
mail:imap:tls_imap_cert_file = ""
mail:imap:aps_topic = "com.apple.mail.XServer.e8cc7328-2fe9-4b6f-aae5-b6f26f9287b3"
mail:imap:sieve_proxyservers = _empty_array
mail:imap:request_enable_webmail = no
mail:imap:lmtp_luser_relay_enabled = no
mail:imap:unixhierarchysep = no
mail:imap:urlauth_hostport = ""
mail:imap:imap_auth_gssapi = no
mail:imap:partition-default = "/Library/Server/Mail/Data/mail"
mail:imap:allowanonymouslogin = no
mail:imap:quota_custom_warning_message_path = ""
mail:imap:imapidlepoll = 60
mail:imap:quota_custom_error_message_path = ""
mail:imap:enable_pop = yes
mail:imap:tls_session_timeout = 1440
mail:imap:mupdate_server = ""
mail:imap:mupdate_realm = ""
mail:imap:auth_gssapi_hostname = ""
mail:imap:enable_sieve = yes
mail:imap:lmtpsocket = "/var/imap/socket/lmtp"
mail:imap:enable_quota_warnings = no
mail:imap:mupdate_port = ""
mail:imap:postmaster = "postmaster"
mail:imap:pop_auth_gssapi = no
mail:imap:pop_auth_apop = yes
mail:imap:deleteright = "c"
mail:imap:proxyd_allow_status_referral = no
mail:imap:sharedprefix = "Shared Folders"
mail:imap:sasl_auto_transition = no
mail:imap:tls_ca_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
mail:imap:sasl_minimum_layer = 0
mail:imap:sievedir = ""
mail:imap:debug_command = ""
mail:imap:duplicatesuppression = yes
mail:imap:tls_lmtp_key_file = ""
mail:imap:servername = ""
mail:imap:quota_full_tempfail = yes
mail:imap:partitions = _empty_array
mail:imap:tls_imap_require_cert = no
mail:imap:sieve_admins = _empty_array
mail:imap:global_quota = 0
mail:imap:mupdate_retry_delay = 20
mail:imap:not_junk_mail_userid = ""
mail:imap:quota_custom_warning = _empty_dictionary
mail:imap:enable_imap = yes
mail:imap:popminpoll = 0
mail:imap:tls_pop3_key_file = ""
mail:imap:sendmail = "/usr/lib/sendmail"
mail:imap:tls_lmtp_cert_file = ""
mail:imap:tls_require_cert = no
mail:imap:notification_server_enabled = yes
mail:imap:tls_sieve_require_cert = no
mail:imap:defaultpartition = "default"
mail:imap:pop_auth_clear = yes
mail:imap:allowallsubscribe = no
mail:imap:sasl_pwcheck_method = "auxprop"
mail:imap:sieve_maxscriptsize = 32
mail:imap:tls_sieve_key_file = ""
mail:imap:tls_ca_path = ""
mail:imap:defaultacl = "anyone lrs"
mail:imap:reject8bit = no
mail:imap:tls_key_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
mail:imap:tls_pop3_require_cert = no
mail:imap:sasl_maximum_layer = 256
mail:imap:autocreatequota = 0
mail:imap:tls_sieve_cert_file = ""
mail:imap:userprefix = "Other Users"
mail:imap:mupdate_admins = _empty_array
mail:imap:postmaster_address = "[email protected]"
mail:imap:mupdate_username = ""
mail:imap:quota_warn_frequency_days = 0
mail:imap:tls_pop3_cert_file = ""
mail:imap:aps_topic_enabled = yes
mail:imap:quotawarn = 80
mail:imap:plaintextloginpause = 0
mail:imap:enforce_quotas = no
mail:imap:tls_server_options = "require"
mail:imap:allowplaintext = yes
mail:imap:loginrealms = _empty_array
mail:imap:lmtp_luser_relay = ""
mail:imap:imapidresponse = yes
mail:imap:tls_cipher_list:_array_index:0 = "DEFAULT"
mail:imap:imap_auth_login = yes
mail:imap:admins = _empty_array
mail:imap:altnamespace = no
mail:imap:sieveusehomedir = no
mail:imap:tls_lmtp_require_cert = no
mail:imap:log_level = "warn"
mail:imap:umask = "077"
mail:imap:hashimapspool = no
mail:imap:imap_proxyservers = _empty_array

Command-V will not work!

I use command-c & command-v more than any other keys on my keyboard and all of a sudden, command-v will not work. I think one of my children pushed something that disabled it, but I cannot get it to paste anything even though my other command options work. When I press command-c the "Edit" tab highlights and when I press command-v the "Edit" tab also highlights but it does nothing. It does this in every program so it's not program specific. Wow...amazing how missing one function can disable a person so quickly!

A couple of people who have had this problem found an SMC reset resolved it, which is odd as you wouldn't think there would be any connection. However it is easy enough to do.
from;
http://support.apple.com/kb/HT3964
1.
Shut down the computer.
2.
Unplug the computer's power cord.
3.
Wait fifteen seconds.
4.
Attach the computer's power cord.
5.
Wait five seconds, then press the power button to turn on the computer.
If that does not work, then explore your idea that your kids may have re-assigned that function to something else. Ask them if they were doing anything like that.

Command-C is not working consistently to.

Command-C is not working consistently for me. In multiple apps, but mostly in Word, I find myself pressing Command-C and then Command-V to paste and what I paste is the LAST thing I copied, not the most recent. I sometimes have to repeat teh sequence several times before it pastes the thing I want it to. Any suggestions? I tried searching for this problem, but didn't find any relevant discussions. Thanks!

Hello eeinna,
I was thinking it might be a good idea to reset the SMC and the PRAM on the computer. Here are the 2 articles for those processes:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
And
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
If needed I would also recommend testing the issue in a new user, and following the directions in this article as well based on what you find.
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
All the best,
Sterling

Run Sql command line is not openning.

Hi !
sql command line is not openning.(windows 2008 enterpise and oracel 11g express)
please tel me is there any other way to open it, i have tried it from the phyical directory also.
but oracel is working properlly.
i wanted it load data from captured data to oracle database. (i was migrating).
yours sincerely
Edited by: 944768 on Aug 14, 2012 12:12 AM

Open a command prompt (cmd), from there run:
c:\> sqlplus user/passwordHow do you plan to "load data", based on what format? Sqlplus might not be the right tool for the job.
Sql*loader is one option. Another option to help with migration is Oracle SQL Developer (separate, free tool).

How to organize app windows in Exposé.? The command 1 , or, command 2 does not works.

How to organize app windows in Exposé.? The command 1 , or, command 2 does not works.

There is no Exposé in OS X Mountian Lion, Apple removed it for "Mission Control" and yes it is a confusing mess.
https://support.apple.com/kb/ht4689

Go to current song (command L) is not working in itunes 11

Go to current song (command L) is not working in itunes 11, anyone having the same issue?

Thanks for figuring that out.
I thought that command-L was working when I first switched to iTunes 11, but then it wasn't working anymore. That's the ticket: I changed the display to show the sidebar.
Still, I'd like to be able to use the command-L feature whether I'm showing the sidebar or not.
I'd also like it if iTunes would keep showing the currently playing song when in Grid or Artist view modes. It doesn't, so I have to keep using command-L to see the current song info.

Line-in not working with microphone?

Line-in not working with microphone.
I have Mac Mini Intel 1.83 GHz with 10.4.8
I have tried plugging 3 microphones into the line-input on the back, also on my wife's Mac Mini (same model, os), but I cannot get to record into the Mac.
I've been into System Prefs and set input to Line In and slid the Input Volume to high, but nothing.
I know the Microphones work because if I plug them into a Griffin USB/mini jack adaptor and do it that way by selecting iMic USB audio system from the Input in System Prefs all works fine.
But I need to use the mic with the Line-In.
Any ideas why this is not working?

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

How do I paste a screen capture? Edit-paste or command-V do not work.

How do I paste a screen capture? Edit-paste or command-V do not work. Tom

how did you take the screenshot?
if you used a key combo like command+shift+ a number it will be saved as a file on your desktop
you need to add control* to whatever key combination you pressed to put it on your clipboard
*sorry for saying shift before i meant control

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

Command line support

Adobe, Has CreatePDF a command line support in order to convert multiple pdf files from a specific folder?
thanks!

Sorry for my ignorance, when you say you installed every driver in there are you referring to adding them to the driver database or to your bootwim. Also if you cant grab the logs you might be able to get a report based on an unknown system, look in reporting
under "History of a task sequence deployment on a computer" if there was anything recorded before it bombed out you might be able to get some info.
Im still leaning towards a network driver though, can you snap an image of the drivers you have loaded into your preferred bootwim.

Service support not working of webcam

i am purchase a laptop envy 6 a weak before but its webcam not working.hp phone support not working properly.when i use phone support they did not pickup the call..please solve my problem as soon as possible.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Command Line Support Not Working in OSD

Similar Messages

Maybe you are looking for