[Common 17-345] A valid license was not found for feature 'Implementation' and/or device 'xc7z045'.

Theimplementation feature and the whole flow was working smoothly until recently wehtn the error popped up. When I checked the license status it is still valid. I tried returning the license (with the hope to generate a fresh one), this is not going through as I see "Invalid option specified" message. I realized that the trusted storage itself was having problems. The issue that I was facing was very much similar to what is explained in the below discussion:
http://forums.xilinx.com/t5/Installation-and-Licensing/Vivado-License-Manager-will-not-allow-me-to-return-license/td-p/527697
I followed the steps as in above and could see trusted storage itself that was having problems. And followed the steps in the above discussion and could successfully run installanchorservice.exe
This should have solved the issue if the trust was broken due to anchoring. This however, did not solve my issue. On further reading, I came across the below AR:
http://www.xilinx.com/support/answers/63683.html
Based on this I could see that there are 3 reasons for Trust getting broken.
Binding (tampering the system parameters)
Anchoring
Windback
My issue is with Binding. The NIC card got disabled for some issue and I had to run diagnostics and fix it. I strongly suspect that due to this trust is broken due to Binding.
Attached the logs.txt from the the following commands:
xlicclientmgr -v "format=long"
xlicclientmgr -l
I could not find any material on the web to restore the trust of it is broken due to binding issue. Any pointers will be really appreciated.
Regards,
Ravi Raju

Yes that repaired the broken license. Than you very much for this.
For the benifit of others:
It was confirmed that in my case the trust was broken due to Binding. For this, you need to provide the files that you find in the discussion above and Xilinx support will provide a xml file with instructions, that you need to follow to repair the license.

Similar Messages

Simulation engine failed to start: A valid license was not found for simulation

Hi,
I'd like to run xsim by clicking "Run Simulation" in Vivado 2015.2 . However, in the Tcl console I see this error:
INFO: [Common 17-186] '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav/xsim.dir/ProgNetwork_behav/webtalk/usage_statistics_ext_xsim.xml' has been successfully sent to Xilinx on Mon Jul 13 16:01:02 2015. For additional details about this file, please refer to the WebTalk help file at /home/rob/sw/xilinx/xilinx-build/Vivado/2015.2/doc/webtalk_introduction.html.
INFO: [Common 17-206] Exiting Webtalk at Mon Jul 13 16:01:02 2015...
run_program: Time (s): cpu = 00:00:08 ; elapsed = 00:00:10 . Memory (MB): peak = 6669.582 ; gain = 0.000 ; free physical = 763 ; free virtual = 18006
INFO: [USF-XSim-4] XSim::Simulate design
INFO: [USF-XSim-61] Executing 'SIMULATE' step in '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav'
INFO: [USF-XSim-98] *** Running xsim
with args "ProgNetwork_behav -key {Behavioral:sim_1:Functional:ProgNetwork} -tclbatch {ProgNetwork.tcl} -log {simulate.log}"
INFO: [USF-XSim-8] Loading simulator feature
Vivado Simulator 2015.2
ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
Please see the Tcl Console or the Messages for details.
However, if you look at the attached image, you'll see that my installed licenses include the license name "Simulation".
Why is Vivado complaining about "Simulation engine failed to start: A valid license was not found for simulation" ?
Thank you,
Rob

Hi Rob,
The reason for the license error is: Hostid mismatch. i.e., the hostid of the machine is different from the hostid in the license file.
I observe that the license file is generated with hostid: 52540019ee7e. You can cross check your hostid of the machine by running the command: lmutil lmhostid
You can rehost the license file using the steps mentioned in the section "Rehost or change the license server host for a license key file" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf
Thanks,
Vinay

LIBOVD ERROR - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

Hello everyone,
I have the following scenario:
We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
<Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
ORABPEL-30511
When that error ocurred, no one was able to use the system (BPM/Human Workflow).
I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
connection to ldap://[10.200.10.57]:7001 as cn=Admin.
javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
[2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.> validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
Also, I only got this error in the "diagnostic.log".
Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
Thanks in advance!

I have moved your thread from Certification to SOA Suite to get proper assistance.
Thanks,
Lisa

Why cant i download itunes on my windows 7 pc? i used to have it once but it was not updated for a while and got deleted...i have tried to download it on other web browser but all i got was "thanks for downloaing itunes" and nothing happened

why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

HT201210 I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.

I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460)

Contract Terms-Document sequence was not found for generating clause number

Hi All,
I am in very strange situation and not able to find out the solution for below problem.
when i am trying to create clause number from Contracts Terms --> Contract Terms Library : Clauses , i found below error.
" Document sequence was not found for generating clause number. Check the document sequence setup."
where i have setup the document sequence setup? Please help me how to resolve this issue.
Thanks in advance.
Edited by: user627525 on Feb 8, 2011 7:25 AM

Hi,
I have the same error when trying to create clause number from Contracts Terms --> Contract Terms Library : " Document sequence was not found for generating clause number. Check the document sequence setup."
Would you like to tell me how did you solve it, please?
Regards,
tinar

"1046: Type was not found" for a custom class calling a custom class

This should be easy... but I've spent two days on nothing but this error.... I am absolutely at my wit's end.
Basically, I've got a "character" container linked to a MovieClip in the library that is supposed to act as a container for various body parts; head, shirt, pants, etc. For simplicity, I've just got Character class and Head class, both in a "char" package, both classes are named the same as their respective files (Character.as and Head.as, both in an actual file called "char"). Character class is supposed to create an instance of Head, but I always get this 1046 error. The problem is that I've got other body parts with nearly identical classes that ARENT throwing a 1046 error and are working just fine. I went and made a new project to see if I was still having the problem with just character calling 1 simple body part. I do.
In the symbol properties, it's Exported for Actionscript & Export in Frame 1... the class is "char.Head" and "char.Character" respectively. I have tried everything I can find or think of, I've done dozens of Google searches and sifted through dozens of forums. I can't find anything and I've been working on this problem for 24 straight working hours now. I'm completely exasperated......
package char {
import flash.display.MovieClip;
import flash.display.Stage;
import flash.display.Sprite;
import flash.events.Event;
import flash.geom.ColorTransform;
import fl.motion.Color;
import char.Head;
public class Character extends MovieClip {
// 1046: Type was not found or was not a compile-time constant: Head
private var _head:Head;
// reference to get the stage later
private var stageRef:Stage;
public function Character(stageRef:Stage=null) {
trace("NEW CHARACTER");
//1180 Call to a possibly undefined method Head;
_head=new Head();
And here's the contents of Head.as
package char {
import flash.display.MovieClip;
import flash.events.Event;
import flash.display.Stage;
import flash.geom.ColorTransform;
public class Head extends MovieClip {
private var skin_type:uint;
public function Head() {
trace ("NEW HEAD");
Now if I declare the head variable and create a new instance of it in my document class, no problem whatsoever. If I do it in my Character class, it just doesn't stop giving me this error!!! Somebody please help me.
1046: Type was not found or was not a compile-time constant: Head
1180 Call to a possibly undefined method Head;

There is a blank movieclip named Character in the library, yup.
Also in my main handler for my document class calls "mainCharacter = new Character(); "
Here's a chunk of the code from the document class. For the record, it calls "head" as just a test and that works fine. Just doesn't work in "Character"
import char.Character;
import char.Head;
public class MainHandler extends MovieClip {
private static var _instance:MainHandler;
public static function get instance():MainHandler { return _instance; }
public var mainCharacter:Character;
public var head_:Head;
public function MainHandler() {
_instance = this;
mainCharacter = new Character();
head_=new Head();

I changed to a new computer, but after I installed the software, went to set up, entered the serial number, then a pop up window tells me: "the serial # you enter is valid but a qualifying product was not found on your computer" and on the selection it g

How can I get my serial number to work with my product?

So you are installing Design and Web Premium CS6?
I started with a student Cs5
That's the qualifying version serial number which the dialogue box is asking for.
Is it a CS5 Creative Suite (doesn't matter if it's a Student version)?

Windows 7 - Apple Application Support was not found. Error Message

Hello Folks,
i keep getting the following message, despite the fact that i have uninstalled Itunes and then installed it again a few times.
"Apple Application Support was not found. Please uninstall, and install again. Error 2 (Windows Error 2).
Can anyone suggest any help?
I have a Windows 7, new Dell Latitude machine.
THank you,

"Apple Application Support was not found. Please uninstall, and install again. Error 2 (Windows Error 2).
Is Apple Application Support currently showing as installed in your Uninstall a program control panel?
If not, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error : Hierarchy version was not found.

Hi all,
I am finding the following warning message, basially it is a business content report and I loaded data to concern cube and while generating a query I'm finiding the following message:
"Hierarchy PROJECT HIERARCHY in version was not found for key date 200504"
Can any one advice me how to over come this.
Thanks in advance.
Regards.

Bhanu Gupta,
Hi.
Let me give you lil background abt our working scenario.
Currently we are working in BW 3.3 integrated with xRPM 2.0.
During extraction, I successfully replicated the data source 0RPM_PROJECT_HIERARCHY and I am able to see the same , in list of data sources(When I go to RSA1 >> Source Systems >> SELECTING OUR SC >> CONTEXT MENU >> DATA SOURCE OVERVIEW).
Now my problem is I'm confused to map this a particular data source, which need to load data in above context.
Can you plz tell me where can I find to which info source that I can assign this particular data source 0RPM_PROJECT_HIERARCHY.
I mean is there any mechanism or way to find??
Looking forward for your response.
Regards.

TS1717 Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

Solving MSVCR80 issue and Windows iTunes install issues.

The network path was not found *DNS*

Hi all,
Some background... I only have one DC which is running AD and DNS. I have a file/share server that I want to add to the domain and along with a few workstations. I was getting an error before this and it was 'dns name does not exist'... but now
I'm getting 'the network path does not exist' error. Some items that I changed are for the DC I pointed the DNS to itself by changing the primary DNS to its loopback address (127.0.0.1) and the secondary dns setting is left blank. For the file/share
server I changed the primary DNS to the DCs IP address. The DC does have a forwarder for resolving external addresses that it does not know locally.
When I try to add the file server to the domain by entering in the DC admin credentials it just says 'the network path was not found' to the DC and it doesn't give me an error code. I just want to add the server/clients to the domain.
The file/share server is a windows 2012 r2 and the DC is also windows 2012 r2.

Both the DC and file share server are on the same subnet and I checked the logs on the FW and the FW is not seeing the traffic.
As far as DNS goes do I have it configured correctly. For the DC I have a static IP and the Primary DNS setting as its loopback address. The file share server also has a static IP address and the Primary DNS setting is the DCs IP address.
On the DC there is a yellow exclamation icon on the network icon which says 'no internet access'. This could be a problem... but when I do nslookup I'm able to resolve names.
On the DC and File server I have McAfee agent EPO running on it (HIPS and A/V). I checked the logs on the DC and the only thing being blocked was netbios which I allowed it now but for some reason the logs still show that it is being blocked.

Requested Resource Was Not Found

I tried accessing the Music Store, but get a message popup saying
"iTunes could not connect to iTunes Store. The Requested Resource was not found."
I quit and restarted the computer, and launched again. Same message. It was working yesterday just fine.

Some basic information would probably be helpful: your OS version, your iTunes version, how your system connects to the Internet, and what changes if any you've made to the system since it last worked. Otherwise people will be working in the dark to guess what to suggest.
Regards.

Fail to Abend when Row Not Found for Update?

I'm using Coldfusion 9 against a IBM mainframe DB2 database. I have a condition that when a row is not found for update in a cfquery, execute an insert cfquery. Sounds logical and easy, right? Not so! Error trapping is failing to return an error condition when the row was not found for update!
Here's the code:
<cftry>
     <cfinclude template="qry_update_table.cfm">
     <cfcatch type="any">
          <cfinclude template="dsp_errorInformation.cfm">
          <cfabort>
     </cfcatch>
</cftry>
<cfdump var=#tmec04_result#><cfabort>
The Query code is:
<cflock timeout="15" name="UpdateTUID04Lock" type="exclusive">
     <cfquery datasource="#APPLICATION.DB2_DSN#" name="update_tuid04" result="tmec04_result">
          UPDATE #APPLICATION.SQLID#.TUID04
               SET   MON_BEG_TIME = <cfqueryparam value = #NEW_MON_BEG# cfsqltype="cf_sql_time">
                      , MON_END_TIME = <cfqueryparam value = #NEW_MON_END# cfsqltype="cf_sql_time">
          WHERE USER_ID    = <cfqueryparam value = #NEW_USER_ID# cfsqltype="cf_sql_varchar">
     </cfquery>
</cflock>
There is no row for the NEW_USER_ID, so I would expect an error condition. No such luck. The dump of temc04_result just shows me the SQL, the record count (0), the execution time (0), and the cached status (false). No SQL code. And a dump of CFCATCH shows that all is well. I expected to get cfcatch.nativeerrorcode = 100 (Row not found). Nope. Got a zero.
Any suggestions.

Regarding this:
There is no row for the NEW_USER_ID, so I would expect an error condition.
Your expectation is incorrect. What actually happens is that the query executes and no rows get updated.
What has to happen is that you have to see whether or not the record is there, and if not, insert it. There are lot's of ways to do that. I think the simplest is an insert query,
insert into yourtable
(field1, field2, etc)
select distinct value1, value2, etc
from some small table
where not exists (something)
Followed by the update query.

A valid provisioning profile for this executable was not found

I have built an enterprise APP. It has been installed in hundreds of machine. It can run smoothly at the begining. After two months, a few of the machice cannot open the APP anymore. I have tried to read its crach log and it has nothing. Finally, i found out the reason by tracing the console log.
The error is "A valid provisioning profile for this executable was not found".
So I check if the file exist but it is disappeared. The user have not removed the profile.
At last, I tried to install the profile again, it is still not working even the profile is installed. Is there anyone who have the same issue? Thank you very much
Message was edited by: Ben125

Sorry that I have made a mistake. A wrong profile is installed.
Thanks

[Common 17-345] A valid license was not found for feature 'Implementation' and/or device 'xc7z045'.

Similar Messages

Maybe you are looking for