Communication problem from the vpn-anyconnect to easy-vpn-remote
Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
Hi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji.
Similar Messages
-
I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays. I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen. When i export from lightroom slideshow and choose the 1920x1080 resolution the end product is a very small video in the middle of a black background. i have double checked and do not have any borders turned on. Another option would be to export from the library but lr mogrify does not seem to put text overlays on video either. Any input would be welcome.
I dont understand anything you said in your post.
Do you have a specific question about video production?
The forums are for individual technical or creative issues that users have with video production. I am sur someone will be able to help you, but and to get a response it is best to ask a specific question.
Is this about a technical problem you have or something about setting up a web site? If its the latter this is the wrong forum. -
I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start. It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?
File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
You should sync your ipod to your computer regularly. -
ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?
Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.
I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml -
Disappearance of Communication channel from the scenario
Hi Experts,
I am dealing with IDoc to EDI scenario . The scenario has in total 15 flows and i have configured respectively all the objects . The next day when i saw that scenario, the Receiver Communication channels are missing from the corresponding parties from that scenario but still existing under the respective parties in "Objects Tab" . Again i went and did "Add to Scenario" . But this is happening frequently.Is there any solution for this automatic disapperance of communication channels from the scenario ? Please help me out in this issue .
Thanks & Regards,
SaratHi Sarat,
Are u able to see the communication channels in the objects tab? sorry ha dnot read ur question completely...
as u see them in the oblects tab,,it means they are present...are all of them under one party?
have made it a part of ur scenario?
Edited by: Mohd Tauseef Ibrahim on Jun 27, 2008 7:49 AM -
VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client
Hello,
I have problem in VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client. ASA 5505 have 7.2.3 software and 881G router have 15.1 software.
881G is configured as hardware client in network exstention mode, and it is placed behind NAT. ASA5505 is working as server. Same VPN Group works correctly from VPN software clients.
When I send traffic from 881G client side, in show cryto sessin detail I see encrypted packets. But with same command I dont see decrypted packet on ASA5505 side. On both devices Phase 1 and Phase 2 are UP.
VPN is working when I replace ASA5505 with ASA5510 correctly with have 8.4.6 software. But problem is that i need to do this VPN between ASA5505 and 881G.
Can you help me, how can I debug or troubleshoot this problem ?
I am unable to update software on ASA5505 side.Hello,
Hire is what my config look like:
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 120 set pfs
crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 140 set pfs
crypto dynamic-map outside_dyn_map 140 set transform-set ESP-AES-128-SHA
crypto dynamic-map outside_dyn_map 160 set pfs
crypto dynamic-map outside_dyn_map 160 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 180 set pfs
crypto dynamic-map outside_dyn_map 180 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 200 set pfs
crypto dynamic-map outside_dyn_map 200 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
tunnel-group HW-CLIENT-GROUPR type ipsec-ra
tunnel-group HW-CLIENT-GROUP general-attributes
address-pool HW-CLIENT-GROUP-POOL
default-group-policy HW-CLIENT-GROUP
tunnel-group HW-CLIENT-GROUP ipsec-attributes
pre-shared-key *******
group-policy HW-CLIENT-GROUP internal
group-policy HW-CLIENT-GROUP attributes
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cisco_splitTunnelAcl
nem enable -
Can the UC520 work as Easy VPN Remote?
I need to establish a telephony connection between a 2851 CCME and an UC520. I think the best option is an Easy VPN but the GUI in UC520 appears to not have Easy VPN Remote. Can this functionality be defined using CLI? If yes, should I follow the same steps as for any router?
Thanks in advanceThanks Pablo,
I did the configuration as mentioned in cisco website but from the debug the router asked me for Xauth username and password so what does he mean?
1- Does he mean we should create username and password in the main router (EZVPN Server) or he needs the username and password which we put for telnet purpose in the main router?
2- I entered the following command but he did't ask me for username and password !!:
837W#crypto ipsec client ezvpn xauth
I read in some discussins that problem is IOS bugs and I should replace the IOS so I have the attached IOSs what kind is supposed to work goods?
Regards -
Communication Problem with the second battery
Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks LinaHi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
I have encountered a different iTunes 7.0 problem from the rest if these
ok, I have wrapped my brain around this one as much as I care to.
here is "MY" problem with the new upgrade.
To start, the background info I guess. I opend up my old (6.0 version) and tried to download one of my favorite TV shows (WILDBOYZ)...lol anywho, it said that a newer version of iTunes was needed. So, in response I attempted to download the new version. When I did, I got the usual windows installer junk with the "would you like to run this software etc" so I got through all that and during the middle of the download I was prompted with "A newer version of iTunes already exist on this computer, cannot continue with installation". So, confused at this point I went to the support section on the Apple website and saw some of the suggestions. So I then removed all old versions of iTunes and Quicktime from my computer via remove/change programs from my control panel etc. I then attempted to retry the download (I have disabled my "Norton Antivirus protection at this point) I was then prompted with another error message and this time it said
"Error 1316. A network error occured while attempting to read from the file C:\WINDOWS\Installer\iTunes.msi"
I don't know what to do with this and I have not seen any other realted problems within this discussion forum regarding problems with the new updates for the 7.0.
can anyone help me with this one, cause I sure would like to see Stev-O and Chris Pontius (WildBoyz) jump in the lake full of crocodiles or something...lol, not only that but I oyuld like to continue BUYING movies and shows for my iPod."Error 1316. A network error occured while attempting to read from the file C:\WINDOWS\Installer\iTunes.msi"
the 1316 was more common with QuickTime standalone installs than itunes installs, but there's a technique that you can try that has had some success with it.
are iTunes and QuickTime no longer showing in Add/Remove?
if so, also go in and manually remove any itunes and QuickTime leftover program files and program folders, as per the "Uninstall older versions of iTunes and QuickTime" section of this document:
Trouble installing iTunes or QuickTime software in Windows
... next, download and install the Windows Installer CleanUp utility, and use it to check for any leftover iTunes and QuickTime installation configuration information. (if you find any, remove it with CleanUp.)
Description of the Windows Installer CleanUp Utility
reboot the PC and try another itunes install. does it go through without the error messages now? -
Nothing but problems from the start...
From the start, I have had problems:
1. When I send emails, it lists them twice in my sent folders.
2. Download ringtones (assigned) that would work whenever they feel like it (random).
3. Stopped notifiying me when I had messages on Facebook. It showed I was online and people were sending me chat messages and thought I was ignoring them because I didn't respond. Later to find out that I had messages... Yes, I checked the notification settings.
4. Stopped notifying me when I had emails. I had to go in to find out I had an email. Yes, I checked the notification settings.
5. Stopped downloading my emails to me at all four days ago and I deleted and reloaded the mail box and it still wont give me anything newer than that.
6. The weather wiki on the front screen will randomly show "Benton" when I'm in "Bentonville".
I'm sure there is more but those are my main concerns right now. I don't have time to sit on the phone or run to the store every time there is an issue with this ******
I did a soft-boot, took the battery out, etc., etc. Any other ideas?I've had mine for 48 hours now and I am experiencing the same issues. I sent my wife a picture yesterday and it kept sending her the same email for about 3 hours. I think it sent about 40 copies. Had to delete the message from outbox, reboot twice and it finally stopped. Today, I updated it with the update and I'm getting random reboots, and apps are crashing. I will try to return it today and post back here if anything changes with new hardware.
-
Camera problem from the locked screen
I am using an iphone 5s and having problems with the camera from the locked screen.
When i flick up the locked screen to use the camera, i am given a blank screen. When i press the home button the camera quickly appears before returning me to the locked screen.
If i want to use the camera i have to unlock the phone.Try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the camera will now come up with you slide up.
Cheers,
GB -
I updated my ipad to IOS7.04 and have had a variety of problems from a sticky keyboard to my programs/apps skipping from program/app to program/app without my touching my screen.
I tried to restore my ipad to the factory setting and that did not resolve the problem. Due to the upgrade i cannot use my ipad as a funtional unit, how can i get my ipad to function properly again?First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
PI 7.1 - Getting the Communication Party from the document
Hello,
In XI 3.0 when I made a Receiver Determination I was able to use "/p1:<document>/<field>" to pull in the Communication Party and Component (Service).
In PI 7.1 I am getting an error when I try to use / or : in the Receiver Determination.
Does anyone know how I can call fields from my document from my Receiver Determination in PI 7.1?
Thanks,
MattYou need to use the drop menu for Communication Party and select "Extended". Although the result is the same as manually entering the fields it does not give the error when you use the drop menu.
Thanks,
Matt -
Also I am using a mid 2012 macbok air.
Here is the stuff it showed me:
Interval Since Last Panic Report: 116543 sec
Panics Since Last Report: 1
Anonymous UUID: 6230F21B-9B4A-4F55-C557-9B70A3D3FBD4
Thu Jun 13 12:46:57 2013
panic(cpu 1 caller 0xffffff800d8b8709): "Double fault at 0xffffff800d828034, registers:\n" "CR0: 0x000000008001003b, CR2: 0xffffff8132e1ff98, CR3: 0x000000000fc28000, CR4: 0x00000000001606e0\n" "RAX: 0xffffff8132e200b0, RBX: 0xffffff7f8df368db, RCX: 0xffffff8132e200b0, RDX: 0xffffff800db74970\n" "RSP: 0xffffff8132e1ffa0, RBP: 0xffffff8132e200a0, RSI: 0xffffff8132e20108, RDI: 0xffffff7f8df368db\n" "R8: 0x000000000000000a, R9: 0x0000000000000010, R10: 0x0000000000000000, R11: 0x0000000000000000\n" "R12: 0x00000000e00002c2, R13: 0xffffff8020fdbf00, R14: 0xffffff7f8df39ee0, R15: 0xffffff8020ea1000\n" "RFL: 0x0000000000010286, RIP: 0xffffff800d828034, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.22.13/osfmk/i386/trap_native.c: 280
Backtrace (CPU 1), Frame : Return Address
0xffffff80f5ac5ec0 : 0xffffff800d81d626
0xffffff80f5ac5f30 : 0xffffff800d8b8709
0xffffff80f5ac60a0 : 0xffffff800d8cddcf
0xffffff8132e200a0 : 0xffffff800db74a62
0xffffff8132e200c0 : 0xffffff7f8df31d8d
0xffffff8132e20130 : 0xffffff7f8df2d283
0xffffff8132e201a0 : 0xffffff7f8df2f5a0
0xffffff8132e20260 : 0xffffff800dc4729a
0xffffff8132e202c0 : 0xffffff7f8dda3f3e
0xffffff8132e20330 : 0xffffff7f8e219fed
0xffffff8132e20360 : 0xffffff7f8e219d05
0xffffff8132e20390 : 0xffffff7f8dd9841c
0xffffff8132e20480 : 0xffffff7f8df2fad4
0xffffff8132e204f0 : 0xffffff7f8dd97fae
0xffffff8132e20580 : 0xffffff7f8dd9939e
0xffffff8132e20660 : 0xffffff800dc4729a
0xffffff8132e206c0 : 0xffffff7f8dd9e8fe
0xffffff8132e20790 : 0xffffff7f8ddc25ce
0xffffff8132e20810 : 0xffffff7f8dda431b
0xffffff8132e20880 : 0xffffff7f8dda42a1
0xffffff8132e208d0 : 0xffffff7f8e21a5c1
0xffffff8132e20910 : 0xffffff7f8e214662
0xffffff8132e20940 : 0xffffff7f8dd9841c
0xffffff8132e20a30 : 0xffffff7f8df2fad4
0xffffff8132e20aa0 : 0xffffff7f8dd97fae
0xffffff8132e20b30 : 0xffffff7f8dd9939e
0xffffff8132e20c10 : 0xffffff800dc4729a
0xffffff8132e20c70 : 0xffffff7f8dd9e8fe
0xffffff8132e20d40 : 0xffffff7f8ddc25ce
0xffffff8132e20dc0 : 0xffffff7f8dda431b
0xffffff8132e20e30 : 0xffffff7f8dda42a1
0xffffff8132e20e80 : 0xffffff7f8e21a5c1
0xffffff8132e20ec0 : 0xffffff7f8e214662
0xffffff8132e20ef0 : 0xffffff7f8dd9841c
0xffffff8132e20fe0 : 0xffffff7f8df2fad4
0xffffff8132e21050 : 0xffffff7f8dd97fae
0xffffff8132e210e0 : 0xffffff7f8dd9939e
0xffffff8132e211c0 : 0xffffff800dc4729a
0xffffff8132e21220 : 0xffffff7f8dd9e8fe
0xffffff8132e212f0 : 0xffffff7f8ddc25ce
0xffffff8132e21370 : 0xffffff7f8dda431b
0xffffff8132e213e0 : 0xffffff7f8dda42a1
0xffffff8132e21430 : 0xffffff7f8e21a5c1
0xffffff8132e21470 : 0xffffff7f8e214662
0xffffff8132e214a0 : 0xffffff7f8dd9841c
0xffffff8132e21590 : 0xffffff7f8df2fad4
0xffffff8132e21600 : 0xffffff7f8dd97fae
0xffffff8132e21690 : 0xffffff7f8dd9939e
0xffffff8132e21770 : 0xffffff800dc4729a
0xffffff8132e217d0 : 0xffffff7f8dd9e8fe
0xffffff8132e218a0 : 0xffffff7f8ddc25ce
0xffffff8132e21920 : 0xffffff7f8dda431b
0xffffff8132e21990 : 0xffffff7f8dda42a1
0xffffff8132e219e0 : 0xffffff7f8e21a5c1
0xffffff8132e21a20 : 0xffffff7f8e214662
0xffffff8132e21a50 : 0xffffff7f8dd9841c
0xffffff8132e21b40 : 0xffffff7f8df2d37e
0xffffff8132e21bb0 : 0xffffff7f8df2f5a0
0xffffff8132e21c70 : 0xffffff800dc4729a
0xffffff8132e21cd0 : 0xffffff7f8dda3f3e
0xffffff8132e21d40 : 0xffffff7f8e219fed
0xffffff8132e21d70 : 0xffffff7f8e219d05
0xffffff8132e21da0 : 0xffffff7f8dd9841c
0xffffff8132e21e90 : 0xffffff7f8df2fad4
0xffffff8132e21f00 : 0xffffff7f8dd97fae
0xffffff8132e21f90 : 0xffffff7f8dd9939e
0xffffff8132e22070 : 0xffffff800dc4729a
0xffffff8132e220d0 : 0xffffff7f8dd9e8fe
0xffffff8132e221a0 : 0xffffff7f8ddc25ce
0xffffff8132e22220 : 0xffffff7f8dda431b
0xffffff8132e22290 : 0xffffff7f8dda42a1
0xffffff8132e222e0 : 0xffffff7f8e21a5c1
0xffffff8132e22320 : 0xffffff7f8e214662
0xffffff8132e22350 : 0xffffff7f8dd9841c
0xffffff8132e22440 : 0xffffff7f8df2d37e
0xffffff8132e224b0 : 0xffffff7f8df2f5a0
0xffffff8132e22570 : 0xffffff800dc4729a
0xffffff8132e225d0 : 0xffffff7f8dda3f3e
0xffffff8132e22640 : 0xffffff7f8e219fed
0xffffff8132e22670 : 0xffffff7f8e219d05
Backtrace continues...
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000->0xffffff7f8ddf0fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8dd6c000
com.apple.driver.AppleUSBHub(5.5.5)[54546EC2-8891-334B-9626-1EF6A02450DE]@0xfff fff7f8e213000->0xffffff7f8e227fff
dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000
dl.uds.netusb.controller(1.0d1)[8A6F03A2-5A6B-7137-C413-815E20000EB4]@0xffffff7 f8df25000->0xffffff7f8df41fff
dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x000000000d600000
Kernel text base: 0xffffff800d800000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 117875499067298
last loaded kext at 105449581298871: com.apple.driver.AppleUSBTCKeyEventDriver 237.1 (addr 0xffffff7f8f551000, size 12288)
last unloaded kext at 105568296897670: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f8f545000, size 12288)
loaded kexts:
foo.tap 1.0
foo.tun 1.0
dl.uds.netusb.controller 1.0.0d1
com.rim.driver.BlackBerryUSBDriverInt 0.0.74
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.AGPM 100.12.87
com.apple.driver.X86PlatformShim 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleIntelHD4000Graphics 8.1.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleIntelFramebufferCapri 8.1.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleUSBXHCI 5.5.5
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOSurface 86.0.4
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOAcceleratorFamily 30.14
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.2.6
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.driver.AppleKeyStore 28.21
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOStorageFamily 1.8
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookAir5,2, BootROM MBA51.00EF.B02, 2 processors, Intel Core i7, 2 GHz, 8 GB, SMC 2.5f7
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434353153364D465238412D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434353153364D465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 6
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821f, 0x1d181300 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8404, 0x1d183000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x024c, 0x1d182000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3Apple doesn't respond to crash or panic reports. They're for internal use only.
Any or all of the following third-party system modifications may be contributing to your problem:
OpenVPN client
Driver for unknown USB network device
BlackBerry Desktop Manager
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can determine which is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes. -
Download problem from the App Store
The download hangs at 425 Mb every time and cleaning the storeagent cache and restarting the download again doesn't help. Presumably, it is App Store server problem, but I can't find any contact information there.
I wonder, is there any way to bring support attention to this?HI ...
Try this support article > Can't connect to the iTunes Store
Maybe you are looking for
-
Unable to remove/change sales tax in sales order
Hi Sappers!! I are unable to remove sales tax from a sales order. I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes. The sales order was entered the same day the Vertex re
-
I am working on R12.1.3 multi node shared appltop installtion on OEL 5.4. installations were successful and running fine since 10 days , today suddnly i have got the error stack on login screen. please help. Error Page Exception Details. oracle.apps.
-
I have a casio camera DSC W70 I upload photos with. What is a .THM
I am able to upload my movies and photos. But I see that .MPG (The file I am always able to open always has an exec file below it titled .THM that is the same # as the MPG file. For example: MOV00903.MPG MOV00903.THM Is this THM for PC users and shou
-
I can't hear a conference i recorded in my iphone 3G
I tunes doesn´t recogniza my iphone
-
How do I bookmark in Adobe reader touch?
How do I bookmark in adobe reader touch? I have the surface pro. When I swipe from the side I only have the search, share, start, devices and settings icons.