Company codes assigned to a user not to a role

Hi -
We have set up our end user roles and now the requirement has come through that certain users should only have access to information based on company codes. Is there a way to assign a user to either 1 or several company codes, but not to all; and to not have to change all of the roles that she has access to?
Basically, assign a user to a specific company code, assign the necessary roles and have them only have access to that specific company codes information.
Thanks,
Margaret

Hello Margaret,
that is not possible.
You have to restrict the roles to the specific company codes. Think about the technology of derived roles. That might be the easiest way to adapt the roles.
Regards
Rainer

Similar Messages

Display users along with company code assigned to them

Hi,
I would like to display list of users with company code assigned to them
Thanks & Regards,
Rajesh Kale

Hi himanshu,
I want list of user using complex selection criteria.
It can be display using tools -> Administration -> User maintenance -> Information System -> Users by complex selection criteria.
Here, I am facing the problem that which authorization object I should put so that I can get list of users in which in front of every user I get the company code assigned to them.
Regards,
Rajesh

Dummy profit center-company code assignment

Dear Experts,
How to deactivate company code assignment in dummy profit center?
by mistake we selected one company code in dummy profit center, for which profit center accounting is not applicable, so we tried to remove the check box in profit center but in KE52 transaction the company code assignment details are showing in display mode only, please let me know is there any other transaction is there to de activate.
we are using 5.0 version.
so far no posting has been done in this profit center.
Regards
babu

Dear Experts,
Thank you for the replies, we try to remove the assignment fied for the company code in dummy profit center, but it is not editable mode even in change mode (KE52)
please let me know.
thanks
babu

FMSB company code assignment

Hello,
Last month we created a new company code (E800) using an existing one
as reference with component EA-PS (Funds Management).
For the new company code we have defined the corresponding funds center
(also E800) and made the company code assignment using FMSB transaction.
When posting an accounting document in the new company code the system
generates the funds management document but the funds center doesn't
correspond to the one assigned in FMSB transaction (funds
center/company code).
We've checked all the things we remembered everything seems to be OK:
1 - Transaction FMDERIVE
2 - Customizing activities:
2.1 - Public Sector Management ->Funds Management Government->
Actual and Commitment Update/Integration
2.2 - Public Sector Management ->Funds Management Government->
Actual and Commitment Update/Integration->Activate/Deactivate Funds
Management
Thank you

Dear Mar,
Thank you for your help, the problem is solved.
It was a customizing issue in derivation strategy (field attributes) - FMDERIVE transaction. I have a derivation step in which the source field is company code and target field is funds center. In funds center attribute I had the option 'Do not overwrite if Fld Already Filled' which was changed to 'Overwrite With New Value'.
After this change funds center determination is correct.

Company code and Profit center is not mandatory

Hi,
My requirement is that i wish to make the company code and profit center is not mandatory., ie greyed out. This i want while creating the project. I have assigned the controlling area in the project profile. but when i save the project i am getting the error as " Enter the company code". I made changes in field selction for project definition screen group - both company code and profit center are in display mode. This i did it with regard to Project profile. In project builder screen it is greyed out. but asking for company code.
Is it possible to make it for both? When i tried with Profit center alone, i am not getting any error. Whether company code is mandatory while creating project or anyway can we avoid company code?
Please throw your views
Thanks
Sankar

Hi,
You can try in the following way:
SPRO->Project System->Structures->Operative Structures->WorkBreakdown Structures->UserInterface Settings->
Define Field Selection for WBS:
Step1: Double CLick on "Field Selection: Project Definition"
Step2:Click on "Influencing" button on the Application Tool bar.
Step3:Double click on "Project Profile" line Item
Step4:Against to Contents field- choose the relevent Project Profile (F4 search option) and then enter.
Step5:Now here try to choose Company Code Fieled and make it as "Hide"
Profit Ceneter Field and make it as "Hide".
Step6: Save the changes.
Step7:Check with your Project.
And Pl. let me know the result.
Vemula

How to consolidate the financial statements for 3 company codes, assigned t

Hi Friends,
How to consolidate the financial statements for 3 company codes, assigned to 3 different companies, 3 different fiscal years, 3 different controlling areas and all the 3 Company Codes assigned to same chart of accounts in the same client?
Can we need any ABAP program for this (or) Is it possible using Report Painter?
Please help me.
Thanks

Hi friend,
Is it a real-time situation or something you are visualising ?
For consolidation, you can use a group chart of accounts and select that in the operative chart of accounts for consolidation purposes. This would work provided the company codes use the same operative chart of accounts and fiscal year.
I hope the above would be helpful to you.
Regards,

Table for Profit center company code assignment

Dear all,
What is the table where we can see all company codes which are assigned to the concerned profit center?
Can any of you help me on this?
Thanks,
Kumar

Kumar,
After you make company code assignment changes to a PC, but BEFORE you activate the PC, the data appears in table CMDT_PC_BUKRS .
Once you activate the PC after making your changes, the data resides in table CEPC_BUKRS .
Trust this helps.
Regards
Gulshan

One controlling area with two company codes assigned with one CoA

Hi,
I   am having one controlling area with two company codes assigned , i am using the same gl for two company codes as cost element , when i am positng the miro for vendor purpose it posted the error , to avoid the price difference purpose , i have given one cost center of first company code in OKB9 , and overcome the error , entries posted, when i am posting new entry for MIRO   in secod company codes with same cost element , price difference of that account should go to the other cost center which specifically created for second company code, in the OBK9 i have given cost center first company code   of the same GL account , now this is another new entry in the second company code with other cost center in the second company code since the price difference account should sit in the other cost center of second company code, how to over come this problem, pls help me
Thanks and regards
Murugesan

Hi,
First, remove the default cost center in the cost element. Then, for the system to derive the correct cost center for each company codes, define one cost center for each compny codes in OKB9 just like this:
Co Code   Cost Element   Cost Center
1000          1000000              A
2000          1000000              B
So during MIRO, the system will derive these values you maintain in OKB9.
Regards,

Which of the following is required for multiple Company Codes assigned to s

Which of the following is required for multiple Company Codes assigned to same Company ?
Same Chart of Accounts
Same Currency
Same Fiscal Year

hi,
if multiple companies are dependent on each other then you have to follow the below as same for all companies.
Same CoA
Same ItemMaster Data
Same WareHouses
Same BP Master Data
Same Currency
same fiscal year
and few more master datas which ever necessary.
if they are independant on each other then no need to maintain the same codes.
regards,
varma

If Tax code assigned to company code thn in PO Taxes not calcuated properly

Hello friends,
Comapny codes 2001
I have created a New Input tax Code - AP
Desc - Input (10%Excise + 2%Ecess 1%HEcess + 4% Vat )
Basic Excise - 10%
Ecess - 2%
HEcess -1%
Vat - 4%
I have maintained the Tax code in FTXP & also the corresponding Percentage in FV12,
As i wanted to load it on Inventory i have given Acct key as NVV.
I have also assigned the Tax code to Company Code
JMIP Basic Excise     10%             NVV
JEC2 E Cess                2%            NVV
JSEI   HEcess               1%            NVV
JVRD Vat                      4%
Issue - If i select Tax code - AP check on Display Taxes JMIP & JEC2 are not calculated only JSEI & Vat- 1% & 4% is getting
calculated.If i remove the comapny code assignment to Tax Code then it is workign properly but at tiem of Miro will fvce problem
Can any body suggest me how to go around as if is assign to comapny code then i dont get the desired output, if
dont assign tax code then it calcualtes properly.
I need to assign it to comapny code & want the Tax properly calculated
Thanks & Regards
Shashank

Hi,
OBCL settings is already maintained.
& my Key combination is Tax code
Any other cusotmization?

STO not working for plants of same company code assigned to a Purchase Org

We have two company code ( A & B ) assigned to a single Purchase Org .
when we are trying to do STO of company code A , we are getting an error message like that
The plant you have entered does not belong to the company code that was
determined via the purchasing organization.
Any suggestion please. we assigned all the plants to the Purchase Org .
Thanks
JJ

Hi,
While creating STO you are entering the plant.
Please check whether that Plant is assigned to the Company code A Error message clearly tells you have assigned the Plant to the company code A
G.Ganesh Kumar

Add Company Code to customized extractor (User delegation task)

Hello guys,
Currently we have one report "Delegation" of Authority" that list all the delegations of authorizations among users for a certain period of time. These delegations of authorizations are related to the approval tasks using workflows.
The report is done one the top of one Z* infoObject and data is brought from ECC by a Z* extractor.
This extractor is database view that uses join conditions between 3 tables. The used tables are: SWWUSERWI (Current Work Items Assigned to a User), SWWWIHEAD (Workflow Runtime: Header Table for All Work Item Types) and HRUS_D2 (User Substituted by User).
Due to a new requirement, it is necessary to add to the report the company code of the users (the one who delegates and the one who receives).
The dificulty I'm facing is to find a table that has the company code and that I can link (join) with one of the previous tables.
I have tried with table PA0001 (HR Master Record: Infotype 0001 (Org. Assignment)) where I have the company code of each person, but I cannot link this table to any of the other 3. I have checked also table DFKKWLI (Work Items) but it is not being maintained...
Does anyone has tips that might help me?
I would really appreciate!
Thanks,
Andreia

Hi Rani,
I need more information:
1. Have u copied entire module pool "SAPMKPT2" which is main programe for KP90.
2. You want to set the controlling area? for that u have to call "SAPLSPO4" program and Screen Number "0300".
I think you mostly want to set the controlling area first and the "Delete Planned Costs"...please answer.
Hope this may clear your idea too..
Thanks,
Chetan Shah

Plant and company code assignment in Ecc 6.0

Hi,
In 4.7 and ecc5.0 version we can assign only one company code for one plant but we can assign multiple plants to one company code. but in ecc 6.0 we can assign multiple company codes to one plant. what is the main use to maintiang multiple comapny codes for one plant. in which senario this function will work.

Hi Meher,
Let's not take the sentence "plants can be assigned to different company codes" out of its context.
http://help.sap.com/saphelp_utilities472/helpdata/en/ff/515a4249d811d182b80000e829fbfe/frameset.htm
Golden rules in SAP Logistics:
A single plant is always assigned to one company code.
Several plants can be assigned to the same company code.
A single sales organization is always assigned to one company code.
Several sales organizations can be assigned to the same company code.
In sales, IF the company code of the sales organization is different from the company code of the delivering plant, then SAP will automatically recognize an intercompany sales process.
If the sales organization and plant are assigned to different company codes, an internal billing document is sent between the company codes before the sales transactions are entered for accounting purposes.
These "golden rules" did not change in ECC 6.0.!!!
Best Regards,
Franck

Delete the Company Code assigned to Collection Segment

Hi All
I have accidentally assigned Company Code to wrong Collection Segment, I need to delete the Company Code from the segment. System throws error - Deletion of company codes not possible in released segment
I had search in the forum and could not find the exact solution for that. Could anyone pls help to provide the solution for this?
Thanks in advance
Chandu

Hi Mark,
Though I completely agree with your point, what I wanted to say is that in case a company code has been wrongly assigned to a segment and the segment released, then we can no longer delete that company code from that segment. Then in that case we have to create a new segment and then assign this company code in that segment. In the collection profile, then we have to assign the new segment and remove the old segment.
Actually this is kind of perplexing for me. If we have been using the segment for some time and then later we add a company code by mistake to a wrong segment. Then there should be a provision to delete the company code at least before any data is transferred from FI to collections management. I am not aware of any other solution for this problem. Your valuable comments please.
Regards,
Ravi

Update book inventory with NEW company code assignment for the same site

Hi gurus ,
Our company have this business scenario:
the site has run in Company Code A for several month with business of Material Management function, then the site have to be changed to Company Code B for financial requirement .
What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or sales document clearance , is there any way we can update the book inventory with new profit center corresponding to the CC B ?
Thanks in advance ,
Ryan

Actually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18 for new CC assignment .
All other questions are under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this?

Company codes assigned to a user not to a role

Similar Messages

Maybe you are looking for