Compatibility of OfficeForms by Toplevel Computing

I have used OfficeForms (by Toplevel Computing) on my PC since the days of Windows 95 and installed it successfully on subsequent PCs up to Windows Vista. Despite trying the various settings in compatibility mode on my Windows 7 PC, it refuses to install.
I have build up a rather large form filler data base in this program, which obviously I do not want to lose nor do I really want to start redesigning all the forms I use.
Any suggestions of getting this program to work on Windows 7 or 8 ?
Many thanks.

Many thanks.
I was probably naive in thinking that 'if a program works in a previous version of Windows, then compatibility mode in Win7 or 8 would emulate that version to run the program
I'll check with Toplevel

Similar Messages

Photo shop compatibility vs my semi old computer (first time with photo shop and first time poster)

My computer is unable to run photo shop CC and so on because my computer isn't compatible for being old. I was very sad to find out after purchasing. I did not check the compatibility because again, my computer isn't that old. I'm stessing out until i get a new computer because I really need photoshop for my photography. I think that the CS6 version or even lower would be compatible for my computer until I am able to afford a new one. I run a dell windows 7 I believe. where can i download the older versions of photo shop so i can stop stressing?? thanks

You can get CS6 at the link below. Be sure to follow the VERY IMPORTANT INSTRUCTIONS or it won't work.
CS6 Suite's Tech Specs
http://prodesigntools.com/products/adobe-cs6-system-requirements.html
CS6 Direct Downloads
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Nancy O.

ITunes and Audible compatibility after transfer to new computer

I've had a serious compatibility problem between iTunes and Audible eversince transferring to a new computer. This after iTunes and Audible worked seamlessly for two+ years on my old computer.
At first iTunes would not accept my Audible username/password, then after reinstalling and updating both iTunes and Audible Manager I received a "you cannot authorize any more computers for this account. You must deauthorize at least one other computer . ." error message. I've deauthorized, then authorized my computer twice in an attempt to correct whatever is causing this (two computers are automatically authorized when I've done this) but I still get the "you cannot authorize . . " error message whenever I try to import my Audible files.
I'm using an external HD (from the old computer)as my music folder location for iTunes, however Audible is downloading to my computer's HD. Can this have something to do what's going on? I've also tried disabling the firewall with no success. Have also made sure Audible and Apple are both "allowed" in Firefox's content. Any suggestions on how to resolve this?

I would try copying over the tracks from your XP computer again as the files from the first transfer may be corrupted.
B-rock

Will mozilla firefox be compatable with KASPERSKY 2011 total computer protection

Iam wanting to down load Mozilla Firefox to replace Windows Internet explorer 8. I run Kapersky 2011 full security protection on my computer.will Mozilla Firefox browser be affected by this?.

I have the same problem. Hopefully, those with HP Simplepass from Egistec will have relief. Here's the email I got from their customer support:
"Thank you for contacting EgisTec and your interest on our products.
Currently HP SimplePass does not support Firefox 4. However, our development team is working on this and the updated version of HP SimplePass will support Firefox4 in the near future. We will inform you by mail when it is ready.
Please visit our website regularly to look for further updates on our products.
Thank you very much for your valuable feedback.
Yours Sincerely
EgisTec Customer Service"

I'm using CS4 design standard and my serial no. is invalid when I've changed computer. I have deactivated the suite on my previous pc.

I'm using CS4 design standard and my serial no. is invalid when I've changed computer. I have deactivated the suite on my previous pc. Please advice.

Please refer to :
Invalid serial number error
Error "Invalid serial number" | Acrobat 9 | CS4
Please check the internet security status, also check the administrative rights.Most importantly check the compatibility of CS4 with the computer.System requirements | CS4, Point Products
Hope it would help you.
Regards
Rajshree

Itunes 11.1.1.11 home sharing doesnt work on Windows 7 - whats the latest work around??

Hi all, i know there is lots of stuff going around about this but the fixes i want to try dont work. I have changed to compatibility mode and restarted the computer and itunes and started home sharing to no avail. We have an ATV2, ATV3, ipad mini, Ipad 2, ipad3, 3 x iphone 4 and 1 x iphone 5 that all worked perfect before the latest round of updates. The ATV's, itunes and all the IOS devices have the latest versions and thats when it all stopped.
I dont want to delete every trace of itunes from the computer like some have suggested.
Now What??
Thanks for anythin you can suggest.

Doing a bonjour repair using "uninstall program" on windows 7 resolved this for me, the AirPlay icon came back in iTunes and Home sharing showed up on my Apple Tv 3 again. :-)

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

10/21/2010 Update - Netflix/Silverlight no longer work on 2008 Mac Pro

After performing the latest update tonight I can no longer watch video "instantly" (streaming) from Netflix.
After manually trashing and installing the latest Microsoft Silverlight internet plugin, Netflix thinks it is an O/S issue.
This is the error message I get:
Instant Watching System Compatibility
Watching instantly on your computer
Our apologies — streaming is not supported for your operating system.
Note that your current Internet browser is fully compatible with adding titles to the Instant Queue for later watching on compatible devices.
Complete System Requirements
To watch instantly, you'll need a computer that meets the following minimum requirements:
Windows
Windows XP with Service Pack 2, Vista or Windows 7
Internet Explorer 6.0 or higher; or Firefox 2 or higher
1.2 GHz processor
512 MB RAM
Mac
An Intel-based Mac with OS 10.4.8 or later
Safari 3 or higher; or Firefox 2 or higher
1 GB RAM
Of course my Mac Pro 2008 Eight Core exceeds these requirements (10GB memory for example)
Any suggestions?

I assume the update you refer to is Java.
Does it happen with Firefox 3.6.11? Safari 5.02?
Did you make a fully bootable clone first?
It is not uncommon for OS X security updates to break something.
I'd actually post and look in "Using Snow Leopard" forum.

Which solid state drives are compatible with iMac 7 27 inch late 2009?

I am interested in installing an SSD (120 to 250gb) for the start up drive and run the system and apps that are disk drive intensive like databases. My goal is to speed up my iMac 7, and of course, minimum investment necessary.
I searched online and find lots of material at OWC, Crucial and iFix it but have found conflicting opinions and even success in the upgrade. So my questions are:
1) Can an SSD be installed in my iMac? iMac 7 late 2009, 2.8Ghz 27", model 11,1, 16GB RAM
    a) as an internal hard drive in addition to the factory installed?
    b) as an internal hard drive in replacement of the factory installed?
    c) as an external USB drive?
2) What type of SSDs are compatible?
3) Assuming that 1 and 2 are positive, what are the most critical things that I should keep in mind when transferring OS X and the boot drive location from the current drive to the SSD?
Any guidance, no matter how partial is greatly appreciated.
Thank you.

I put an OWC SSD drive in my late 2009 21.5" iMac. Note that your model computer has a link speed limit to 3G, so putting a 6 G will not give you more than 3G link speed. Furthermore, putting a 6G SSD in this model might also throttle down the actual speed to 1.5G. Not sure about other model drives, but that is noted in the fine print at OWC. Read the compatibility issues for your model computer, especially about the link speed issue
There is also the issue of the temp sensor which is located internally on the hard drive for this model and later. So you will have to make special adaptations to install any drive other than direct same type compatilbe replacements in the main bay. OWC also sells an adapter sensor cable for this, but I think it cost around $45.
One thing that drove me to OWC was the fact that they do not recommend using TRIM with their drives. That is a debatable issue about using TRIM with other drives, so if you go with another brand, you might want to research that topic before choosing another brand other than OWC. Many have stated no problem without using TRIM enabler software using some of the other brands like Samsung SSD drives.
What I did is left the internal drive in the main drive bay and installed an OWC SSD in the optical bay using the data doubler adapter. This has worked out great for me and I use the main drive as a backup drive. There are several sizes available in the 3G model. I chose the 240gig.
The whole kit with the data doubler is in the link here:
http://eshop.macsales.com/item/OWC/DDIMSSD240/
Not saying you will get blazing performance with this like 6G compatible speeds would give, but as I said, your computer hardware is limited. But your sustained Read/Write speeds will basically double, and the Random Read/Write will go up tremendously.
You will definitely be pleased with the performance increase.
Once I installed the drive, I just used Disk Utility to format the SSD drive and then restored the whole internal drive to the SSD drive. Everything copied including the recovery partition to the new drive. Once the restore was done, just changed startup disk and booted into the SSD. Was very simple.

JMicron + x58 Platinum + windows 7 64 bit = no go

Hi all,
I have an MSI x58 platinum running bios 3.7. (ive also got a core i7 930 (3 x 2 GIG ram))
My issue is
Ive just rebuilt it and i have just acquired 2 x 36GIG 10000RPM Raptors.
Ive done as per the manual said and stuck them on SATA 7/8 made a RAID 0 (see it in the BIOS).
The issue is when i start to load Win7 64bit I get to the "where do you want to install windows" part.
I see Disk 0 Partition 1 is the 68.9 (Jmicro RAID0) that i have setup.
I select it and Windows spurts "Setup was unable to create a new system partition or locate an existing system partition".
So what am i doing wrong? Ive tried to load the Jmicro driver at this point that i download from the MSI website v1.17.55.00. It doesnt show it automatically you need to untick "hide drivers that are not compatable with hardware on this computer". Weird as its Jmicro and its from MSI and MSI recommended.
Ive also had a try with forcing that driver but still no go.
Anyone of you gurus have any ideas? Is there some sort of seperate bios bootloader section that i need to do some stuff in?
Cheers
Anthony

Quote from: test7875 on 26-March-10, 08:26:52
Yes they support TLER.
The Jmicron is a faster option.
But it doesn't work. I still say to forgo the small performance boost and stick with the Intel controller. In my experience I wouldn't trust the Jmicron as my boot controller. Try Google and type "JMicron RAID problem" and you may be turned off by what you read.

How do I make my new keyboard work?

Hi there my beautiful Apple Friends! : - )
Just opened a fresh smelling parcel from Apple....BUT now I don´t get it to work the
way I hoped it would....
I have a MacBook 10.6.8 with a swedish keyboard. Now I bought an extra apple one (not
the wireless) with a portuguese set up.Thought that I could just plug it in, install and use it...
and that it would be easy, with the possibility to switch between them....
So my questions are - how do I get the portuguese set up to work? And can I later just
switch between them?
Do I need to upgrade to Mac OS X 10.7? And can I do that, my mac is kind of old,
like 5 years....
Thanks for any info!!

System Preferences/Keyboard/Input Sources - add the new one and there is an option to display Input menu in the menu bar, which should allow you to switch.
Computer Compatibility - Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
Applications Compatibility (2)
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space

Microsoft Word 2008 and Spaces problem - found a workaround

Anyone who's tried running MS Word 2008 and Spaces knows that Word is pretty much unusable. The formatting palette moves to a different space, leaving behind the title bar, and the desktops just switch automatically, windows disappear, etc.
Here's a workaround that actually makes it usable. Disable the Toolbox/formatting palette by clicking the "Toolbox" button at the top of the Word window. The formatting palette will go away. You don't want this, it's the root of all evil. To get access to the options in the formatting palette, right click on a blank space somewhere in one of the toolbars, and select the toolbars you want access to. Then the stuff that was available previously in the palette will be available as a toolbar instead.
This bug has driven me nuts for months. NUTS. This seems to have fixed it. Just make sure you never enable anything that resembles the formatting palette and all should be fine. I haven't tried opening multiple word docs in different spaces yet, only the same space.

Hi Sickels,
Welcome an board to the Apple discussion forum for user to users ...
First of all I like to tell you that this is the wrong forum to as ...
Ad the Discussion Front page 'where ALL categories are' there is a section for Windows Compatibility. An when your computer specimens are correct it says OSX 10.4.X This is Leopard OSX 10.5.X
Now to your question > Open the application Word.
Now you will see on the right site of the Menu Bar 'FORMATTING PALETTE' next to the icon 'GALARY' click on it and the formatting palette will show up. To hide it click again on it.
Dimaxum

DVDSP DVD's play fine in macs but not in standalone players...

This might be attached to my previous problem, but I thought I would give it a new topic as it is now a new problem.
The DVD's I have made in DVDSP play as they should in DVD Player when inserted into the two iMacs we have, however when we insert the discs into a standalone/set top player, the DVD plays the main track first and THEN goes back to the menu.
What should happen is that a short intro video plays (first play) then onto the Menu where, of course, the viewer makes their selection.
If I stop the DVD by hitting th STOP button on the standalone player several times, I eject the disc and then re-insert it, the DVD plays as it should; showing the first play video and then going to the menu.
Would anyone know a solution to the problem apart from telling the client to hit stop first, ejecting and then re-inserting the DVD?
Cheers,
Spookola

I can only tell you what I'd start doing because I don't know what is happening here any more than you do. First I'd buy some other brand -R dvd blanks. Next I'd make some minor change to the DVD SP setup and burn a new set. You should know that burning dvd's on a Mac or PC is not as foolproof as commercially burned dvd's. You CANNOT guarantee compatibility. If you sell 50 copies you WILL find some people that can't play yours because of compatibility issues. For them you can try burning a +R dvd or buy another external burner and try that too. No single solution will guarantee compatibility when burning from a computer and playing on a commercial dvd player. some folks "never have a problem" but in general I think that's because they don't burn that many dvd's for that many people. sooner or later most folks that burn dvd movies on their mac or pc will find somebody that can't read their dvd.

Lexmark Optra S 1255 and mac 10.6.8--not working? I have a 1284 cable, installed drivers, but it just swirls and states "printer offline"? Anybody? I really like this old laser printer. thanks for looking

1. Hello
2. Problem with old laser printer and compatibility.
3. My computer is a iMac
4. running 10.6.8
5. printer: Lexmark Optra S 1255
6. bought a IEEE 1284 printer cable
7. installed drivers
8. When I add the printer, it just swirls and state"printer offline"
9. Any advise would be greatly appreciated?

Explain #8.
Did you restart after adding the drivers?
If you open the System Profiler, under Firewire or Printers what do yo see?
(Apple Menu/About this Mac/More Info/Firewire or Printer)
If it sees them then you know it's a configuration problem.

Major effect issues (after installing XAVC/XDCAM Plug-in)

Hi all,
I encounter major issues with applying effects and titles in FCPX (10.0.8).
Already in preview (skimming) I get black screens and when I apply effects, they don't show or give a black or distorted picture. Also older projects are effected. For example; where I used 'cold aura' effects on some clips, they are all distorted now. In the event library aswell, some clips are black. When skimmed they show up and when the mouse pointer is gone, the clip is black again.
I have this issues since I updated protools, FCPX and installed the XAVC/XDCAM Plug-in by Sony (PDZK-LT2)
Anyone else have these problems? I'm really Looking for a solution, as I have to deliver to clients this week...
Kind regards,
Olafski
(The Netherlands)
Processor 3,2 GHz Intel Core i5
Geheugen 8 GB 1600 MHz DDR3
Videokaart NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.8.3 (12D78)

Olafski wrote:
… Unfortunately I have no Pro Apps-folder in …
there are TWO locations for a Library/two Libraries …
one in your 'user'-folder
another one in toplevel/'Computer' ....
check both to find the Pro Apps folder .......
==edit==
wow I missed the complete last half hour of your conversation .....
time-warp??

Compatibility of OfficeForms by Toplevel Computing

Similar Messages

Maybe you are looking for