Compiling: libpango-1.0.dylib has no table of contents on Mac OS X 10.5 PPC

I am trying to build pango-1.36.3 as a dynamic library for Mac OS X 10.5 PPC. This is part of the dependencies I am putting togther, so I can build my own copy of the GIMP. I have built my own GIMP in the past and have had no problems compiling Pango. However, this time, the build fails when trying to link the executable pango-querymodules.
I get an error telling me that I have some undefined symbols. These symbols should be in the copy of libpango-1.0.dylib that was just built. When I find that library and run otool -Tv on it I find that it has no table of contents. When I tried otool -tv to disassemble the text section I find that the symbols are indeed there, but there is an empty table of contents so the library cannot be linked against. I was able to complete the compile when building only static libraries, but I do not want to use this build as the OSX "way" is to use dynamic libraries. I am on a newer installation of OSX 10.5 than when I built Pango earlier, so something must be awry in my build system. BTW, this also happens when trying to build GDK-Pixbuf, another Gnome library. I have not found anything useful on Google after hours of searching.
Can anybody give me a pointer as to where to look to fix this problem?

Hmmm, no expert, but...
/usr/bin/gcc-4.0 -dynamiclib -o .libs/libpangocairo-1.0.0.2106.0.dylib .libs/libpangocairo_1_0_la-pangocairo-context.o .libs/libpangocairo_1_0_la-pangocairo-font.o .libs
/libpangocairo_1_0_la-pangocairo-fontmap.o .libs/libpangocairo_1_0_la-pangocairo-render.o .libs/libpangocairo_1_0_la-pangocairo-fcfont.o .libs
/libpangocairo_1_0_la-pangocairo-fcfontmap.o .libs/libpangocairo_1_0_la-module-defs-atsui.o .libs/libpangocairo_1_0_la-pangoatsui.o .libs
/libpangocairo_1_0_la-pangoatsui-fontmap.o .libs/libpangocairo_1_0_la-pangocairo-atsuifont.o .libs/libpangocairo_1_0_la-pangocairo
-atsuifontmap.o -L/opt/local/lib ./.libs/libpango-1.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libglib-2.0.dylib
/opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -L/usr/X11R6/lib /opt/local/lib/libcairo.dylib /opt/local/lib/libz.dylib /usr/X11R6/lib/libSM.dylib
/usr/X11R6/lib/libICE.dylib /usr/X11R6/lib/libX11.dylib -lSM -lICE /opt/local/lib/libpixman-1.dylib /opt/local/lib/libglitz.dylib /opt/local/lib/libpng12.dylib
/opt/local/lib/libXrender.dylib -lX11 -lm ./.libs/libpangoft2-1.0.dylib /opt/local/lib/libpango-1.0.dylib /opt/local/lib/libfontconfig.dylib /opt/local
/lib/libexpat.dylib /opt/local/lib/libfreetype.dylib -lz -framework CoreFoundation -framework Carbon -framework Cocoa -Wl,-framework -Wl,CoreServices -Wl,-framework -Wl
,ApplicationServices -Wl,-framework -Wl,CoreServices -Wl,-framework -Wl,ApplicationServices -Wl,-framework -Wl,CoreServices -Wl,-framework -Wl,ApplicationServices -Wl
,-framework -Wl,CoreServices -Wl,-framework -Wl,ApplicationServices -install_name /opt/local/lib/libpangocairo-1.0.0.dylib -compatibility_version 2107 -current_version
2107.0 -Wl,-exported_symbols_list,.libs/libpangocairo-1.0-symbols.expsym
ld: Undefined symbols:
_cairo_has_show_text_glyphs
/usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/libtool: internal link edit command failed
I believe this is due to an API change that is fixed in the new pango-1.22.0 so an upgrade is probably called for.
http://trac.macports.org/query?status=closed&page=278&order=owner&row=descriptio n
Or posibly repost over here...
https://discussions.apple.com/community/developer_forums

Similar Messages

When I publish some of my projects, the pdf won't play if it has a table of contents.

I've been asked to provide .pdf versions of the published projects, and when I open some of them, they look like this:
I am using Captivate 5.5, and if I uncheck "Show TOC" in the Project > Table of Contents menu, the course will play normally. Since I need to include the TOC in the course, I need to fix this.
Thanks for any replies.

Hi,
Welcome to Adobe Forums.
Please try the patch from these artciles ;
http://helpx.adobe.com/acrobat/kb/reader-acrobat-flash-player-download.html
http://helpx.adobe.com/captivate/kb/captivate-swf-doesnt-play-acrobat.html -- This should solve it.
Thanks,
Anjaneai

Lose table of contents in pdf?

I just noticed that I downloaded a pdf that had a table of contents, and when I used "Save As" to give it a new name in a new location, it no longer had a table of contents. Do you lose the TOC this way, or is there a way to unhide it that I'm not aware of?
I realize I could just rename and move the file in the Finder, but sometimes it's more convenient just to use Save As if I've got the pdf open (even though it might be slow to save).

I have noticed the same problem - and in addition the saved file is often larger than the original. Here's a link to an example file (from a particle physics database):
http://uk.arxiv.org/PS_cache/hep-th/pdf/0602/0602011.pdf
The original file has a table of contents and is about 88K big; if I take a second copy using "save as" in preview, the size jumps to 184K, and the ToC is lost. Any explanation would be welcome! (I posted this question before, but no reply so far.)
12" powerbook Mac OS X (10.4.4)

Pdf with table of contents from a Pages file

I discovered in a pdf file sent to me that it has a table of contents in the sidebar where thumbnails, and annotations also reside.
When I create a pdf from my pages document this is not available.
In the table of contents sidebar are the words 'No Sections'. How do I create sections for every para styled as a heading so that they show in the table of contents sidebar of the pdf file.
I have been using outline to navigate in the pages file but the pdf would be simpler for me to do under meeting conditions.
PAM

Your son was probably referring to *Adobe Acrobat Pro*. But I can't see how that would help with the sidebar automatically.
In *Acrobat Pro* it would be a matter of selecting each head to make a bookmark from that and then resave the .pdf file with the bookmarks sidebar showing upon opening.
You can also add and edit bookmarks in Preview.
+Preview > Menu > Bookmarks > Add Bookmark/Edit Bookmarks…+
I did a further experiment with a Pages document with bookmarks to see if that created the sidebar with bookmarks, but it didn't work.
There are differences in the ways Preview and Acrobat Reader display .pdfs even with what seem to be straight forward settings. I can never depend on a uniform display.
Particularly where PC users are involved.
Peter
btw When you viewed your Pages document with your TOC did you set the Preview sidebar to show "Table of Contents" in the little icons at the foot of the Preview sidebar.

'Table of Contents' structure: the navigational and the within document

Hi.
Here are screenshots of the example of how I would like to structure my Table of Contents for my ebook.
screenshot1 is the .indd. It shows the Table of Contents settings and paragraph styles used.
screenshot2 is the .epub. It is the result after export.
In my actual .indd, I have been able to get the structure to look like the .epub screenshot.
I want to have the nested - pop-down ability to save space.
This is what is going on.
In the .epub (ADE), if I click on 'chapter 1' in the Left Frame of the ebook Window,
it just brings me to the same exact words within the context of the ebook - page 2.
Page 2 of the ebook has this 'Table of Contents'.
From there, (In my actual ebook), 'chapter 1' is a HYPERLINK.
I must click THAT HYPERLINK to actually get to the desired location in the ebook.
This means that I have to click 2x to get to the location.
I am NOT totally clear about this.
Does anyone feel that they have a great way to describe this.
Objective 1: click on 'chapter 1' from the left frame in the ebook and get to the desired location.
Objective 2: click on 'chapter 1' from within the content of the ebook and get to the desired location.
That means, (from what I have read and watched) I am using a
1. Navigational Table of Contents in the left frame.
2. Standard Table of Contents from within the actual content of the ebook.
Thanks.

Hi,
I would need more details from you. Which version of InDesign are you using? Have you tried opening the same EPUB in any other reader like Readium or iBooks? If yes, is the behavior same in these readers or different?
Since I am not able to reproduce this issue at my end, test files (InDesign documents as well as the EPUB) would be helpful. Would it be possible for you to share them with us? You can upload the files to drop box and share the link with me. (email: [email protected])
Regards,
Pooja

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

I have updated to ios5 and latest pages and it has changed table borders and header colours etc, the colour I was using was imported and there border lines are v thick, help has made my docs look rubbish

I have updated o iOS 5 and updated my pages but it as altered my documents, layout, and tables, changing header row colour and thickness of border lines, some thick some thin within same table, if I put default it puts all the lines back, but I only wan them in 2 out f the 4 columns, If I try to change each section then I have to select all borders as default does the whole table, but if I chose all then the order lines are all thick is there any way of changing thickness of lines, and also does anyone know how to pu in a table of contents? I'm currently having to manually put in the info in the table which is v long. Thank you very much

Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
[ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
NVRM: this kernel module has the version 304.60. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
Output of pacman -Qs nvidia:
local/conky-nvidia 1.9.0-2
An advanced, highly configurable system monitor for X based on torsmo
local/lib32-nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libvdpau-git-flashpatch 20120825-1
Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
local/libxnvctrl 304.51-1
NVIDIA X Ctrl library
local/nvidia 310.19-2
NVIDIA drivers for linux.
local/nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries.

SAP has a table that maintains Stock on Hand for each day

SAP has a table that maintains Stock on Hand for each day
do u know which table is that
as i need to find data on stock on hand

HI Arunraj
if there is any specific time of the day that you want to extract the data, you can copy the data from the order series key figure (assuming that you want to extract the data from the order series keyfigure) to a time series key figure and extract the data from the time series key figure into a cube, etc.
I mention a specific time of the day because the stock situation is likely to change multiple times of the day due to stock movements on account of various reasons. Hence if you can establish a rule or a cut-off time of the stock situation, you can use the above route.
Hope this helps.
Thanks, Sandeep

[Trouble] The Report has no tables

Hi there,
i have trouble in using Crystal Reports for .NET 2.0.
I load a CSV file via JetDB Provider as Text database and try to use it as DataSource for my report.
But it crashes all time, with a error like this "report has no tables".
Actually i dont really know Crystal Reports well, i got the project from an ex-employment from our Company.
Of course i readed the PDF documentations "Reporting Off ADO.NET Datasets", "Crystal Reports Guide To ADO.NET", "Connecting the Report Designer Component to a Data Source" but that didnt help me at all.
So i hope you guys can help me,
here are the code: http://rafb.net/p/hMon9Z65.html
with best regards,
Torsten Sailer

So if I understand correctly, you are loading data from a CSV file into a DataSet object and passing the DataSet to a report that you have loaded using the ReportDocument object? Are you using the SetDataSource() method to pass the DataSet to the report?
Make sure that the schema of the DataSet isn't changing from when you designed the report. The report's schema must match the DataSet schema when passing the DataSet to the report.
The best way to troubleshoot the issue is when the error occurs, write out the DataSet to an .xml file (with the schema) and then in a simple Windows app, load the same report, and the xml schema/data into a DataSet object (rather than the CSV) and see if the same error occurs. If it does, open the report in design and do a "Set Database Location" to your xml file and see if it picks up any changes. If it does, then that might be the reason why it errors....the schemas are not matching and you need you find out why.
<p>-MJ</p>

Table of contents file not taking book files into account

Hi everyone,
I've used Indesign's book panel to manage the chapters in a book that I've typeset. I set up the table of contents style (in a TOC document which is part of the books panel) and made sure that it used all the book chapters when compiling the table of contents by checking the option in the TOC styles diaglogue box.
For some reason, the table of contents is ignoring all of the styles in the chapter files so it's not including anything in the table of contents other than a few headings that are within the file that contains the table of contents.
I'm noticing that Indesign is creating a whole lot of duplicate files with a string of numbers appended to the file name, eg.
Newbook_Cha531549083577
These seem to duplicates of the chapter files but I have no idea why Indesign is creating them so I'm wondering whether I've got some corruption happening and whether this may be causing the problem with the table of contents.
Has anyone had a similar problem and if yes, is there any solution?
Really appreciate any advice.

Peter,
I'm having the same problem as gwh. The TOC won't go beyond the first document. All my style names are the same. I don't have style groups.
To make the book I began with one long document that included all the chapters. I broke it into chapters by copying and pasting into new .indd documents (each one created by Save As from the first) and adding all those documents to the book.
Generating the TOC from the one long .indd document works perfectly. I just can't get it to generate from the book (.indb) doc.
I have all the documents in the book open. I have the first one active (in front). I generate the TOC, and I get only the entries for the first document. Here's a screenshot of my TOC box. I must be missing something really simple, huh? (I'm using CS5)

Acrobat Pro 9.0 freezes when viewing/scrolling through the table of contents of a document

I am hoping someone can help me or has experienced the same problem I'm about to describe. I belong to the technical publications group of a fairly large company and I review a lot of PDF documents. I just installed Acrobat 9.0.0 (via CS4 Design Standard) and I've noticed on larger documents where there's a full page or several pages worth of Table of Contents, Acrobat 9.0.0 seems to freeze up when I begin scrolling through the TOC. For example, if I want to use the Text Edit tools or use a sticky note, when I press on an icon, Acrobat will freeze for a good 10 seconds, then will allow you to press the icon. It tends to freeze each time I want to make my next edit or even pressing the up/down arrow buttons to go to the next page. Once I get through the TOC pages, Acrobat seems to function normally--no freezes.
Has anyone experienced this? Would appreciate any kind of advice on how to fix--perhaps there's a patch or update?
I didn't experience any of this using Acrobat 8.0--I never had any real problems with Acrobat until 9.0.0.

Your issue may not be related to a difference between v8 and 9.
I have not had this problem on my computers, but a coworker had this issue. For many documents that others were able to open and scroll through without issue, his computer was freezing and unfreezing. IT determined his graphics capabilities were not able to keep up with the requirements of working with larger documents and gave his computer a RAM upgrade and a new graphics card. Particularly during scrolling, higher demands are made on the computer to graphically render and re-render page content. Documents giving him problems before became a non-issue.
A new graphics card is obviously a $$$ solution, but you might want to check to see if your RAM meets the minimum requirements and check to see if there are any program updates (Help > Check for Updates).
I have had an issue of pdfs freezing, but not specifically in the table of contents areas. If your document has pages with images that have an unusually high number of layers, it may affect the ability to work effectively in the document.

Creating a Table of Content (toc)

Hi
I am very new with Output designer, so please dont mind if it is a silly question.
I have to create a PDF report which has around 15-20 sections. I need a toc (table of content) at first page and at the specified position with page number for each section.
All the sections has some header and detail subforms, so pagenumber is not known at the begining for each sections. I am using xml file as the data file.
So can i use JFPREAMBLE to get the page number for different subforms, and write that on to the toc subform,
i did lot of mind storming but not able to resolve my problem, please help.
thanks and regards
nitin

Hello,
I was able to create a TOC for a recent customer in the UK.
Took a lot of work, but it worked.
You will have to create a TDF to get the data that you require to be on the TOC, but this is quite easy. The best way is to get the TDF to output the result as a seperate file, and then get the orginal data to call the file as the first thing that you do by using the ^file command
If you would like an example please drop me a line at [email protected]
Regards

How do I create multiple TOC's (Tables of Contents) in one Pages document?

I'd like to have multiple TOC's (Tables of Contents) in one document. This is useful for me because I'd like to have a TOC for the regular chapters, then a TOC for the procedures, then a TOC for the tables in the document (it's a tech manual that I am writing). How can I do this? Thanks for any help you can render, and have a nice day!

fruhulda wrote:
If you haven't used a paragraph style it can't create a TOC but you get the blue box with the message.
Paragraph used.
It has nothing to do if there is one main TOC or several smaller TOC to do.
It isn't true that you can only have one TOC in a document. Use styles for your titles and headings. I do and it works fine without section breaks.
You also need to tick which tile and heading you want in the TOCs in the Document Inspector > TOC
Did that.
Thanks to Yvan's quoting from the User Guide, I see where it says each TOC only indexes the material up until the next TOC. Since I had them follow each other, that is why they had no content.
Still it defeats the objective of indexing different material throughout the document if all you get is what is between the TOCs.
Peter

How do I get the table of contents to toggle? I opened it while reading one book I had checked out from my library, but it is still open when I start another book. I am using Adobe 4 and Windows 8.1 on my PC.

How do I get the table of contents to toggle? It has remained open since I opened it while reading two books ago. Thanks for the help.

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

Is there a way to create a table of contents listing the order of tabs(sheets) in a Numbers document?

I am planning my wedding and I have this huge Numbers document with 20+ tabs and I have plans to add many more tabs. Is there a way to create a table that has two columns: column 1= order that a tab appears, column 2=tab name? For example, my first three tabs are called Venues, Must Haves, and To Do List (in this order. I'd want this table of contents to be in the first sheet of the document, so it would be like sheet 1. Then I 'd want like the cells of column 1 to be like 2, 3, 4 (2nd, 3rd, 4th sheet in the document), and then the cells of column 2 to say Venues, Must Haves, and To Do List. I can make a tiny table of one cell in each sheet that I copied the name of the sheet and then do like a cell reference for column 2, but I'm having trouble w column 1.

There is no referential value for the order of the sheets, just the sheet name. Only two things I can think of to suggest:
Do the same thing for the first column that you do with the second (i.e. put a referential column in the same table as the Name and point to that).
Seriously consider using a word processor program. Numbers is probably the wrong tool.

Compiling: libpango-1.0.dylib has no table of contents on Mac OS X 10.5 PPC

Similar Messages

Maybe you are looking for