Concatenation with blank space
t1 = 'hello'
t2 = ' '
t3 = 'india'
concatenate t1 t2 t3 into t4.
output comes 'helloindia'.
what shud we do to get 'hello india'.
hi,
try these..
t1 = 'hello'
t3 = 'india'
concatenate t1 t3 into t4 separated by t2.
<b> or</b>
t1 = 'hello'
t3 = 'india'
concatenate t1 t3 into t4 separated by space.
Regards
vijay
Similar Messages
-
Fill with blanks(spaces) a VARCHAR2 type
Thanks in advance,
I have a VARCHAR2 type rtesta's var of length x(100 char)
how i can fill(write) it without create a other varchar2 var that it'll be only filled with blanks(spaces). e.g
rtesta := ' PC'||fil1||'xxx||fill2....
where fil1 = say 10 spaces.. fill2 = 63 spaces and so on
I would like something as
rtesta := ' PC'|| RPAD(null,10)||'xxx||RPAD(null,63) ...
but.... Oracle treats an empty string as null. And nulls are always a bit special within Oracle. Particularly, rpad('', n) and lpad('', n) returns null.
Exists a built in for my problem?
Thanksalter table your_table modify(your_column char(100));
update your_table set your_column = ' '
where your_clumn is null; /* (added) But,this is no good for performance */
alter table your_table modify(your_column varchar2(100));Exapmples.
SQL> set null (null)
SQL> create table test (vc varchar2(100));
Table created.
SQL> insert into test values ('');
1 row created.
SQL> insert into test values ('a');
1 row created.
SQL> insert into test values ('abcde');
1 row created.
SQL> select substr(vc,1,10) vc,length(vc) len from test;
VC LEN
(null) (null)
a 1
abcde 5
SQL> alter table test modify(vc char(100));
Table altered.
SQL> update test set vc = ' ' where vc is null;
1 row updated.
SQL> alter table test modify(vc varchar2(100));
Table altered.
SQL> select substr(vc,1,10) vc,length(vc) len from test;
VC LEN
100
a 100
abcde 100----
I misread OP's problem, sorry.
Message was edited by:
ushitaki -
How to replace a character in a string with blank space.
Hi,
How to replace a character in a string with blank space.
Note:
I have to change string CL_DS_1===========CM01 to CL_DS_1 CM01.
i.e) I have to replace '=' with ' '.
I have already tried with <b>REPLACE ALL OCCURRENCES OF '=' IN temp_fill_string WITH ' '</b>
Its not working.Hi,
Try with this..
call method textedit- >replace_all
exporting
case_sensitive_mode = case_sensitive_mode
replace_string = replace_string
search_string = search_string
whole_word_mode = whole_word_mode
changing
counter = counter
exceptions
error_cntl_call_method = 1
invalid_parameter = 2.
<b>Parameters</b> <b> Description</b> <b> Possible values</b>
case_sensitive_mode Upper-/lowercase false Do not observe (default value)
true Observe
replace_string Text to replace the
occurrences of
SEARCH_STRING
search_string Text to be replaced
whole_word_mode Only replace whole words false Find whole words and
parts of words (default
value)
true Only find whole words
counter Return value specifying how
many times the search string
was replaced
Regards,
Jayaram... -
Why FileUtils::CopyFile doesn't work with blank space?
Hi all,
If I have a destination directory with blank space inside, looks like: "C:\Users\Pattrick James\Documents" for Windows or "Macintosh HD:Users:Pattrick James:Documents" for Mac.
Then I want to copy a file to that directory, use FileUtils::CopyFile(src, des). Why it doesn't work?
Can someone please help me to resolve this issue without change my path?Sorry, it works fine. It happens because the permission of the directory.
-
Pass parameter with blank space for report ver 6
Hi,
I face a problem that i willing to pass the acno where it's value with blank space, for example ' 9' as parameter into my report, and assign it as v_acno. Inside the report query i add a where condition, acno >= :v_acno. When i run the report and pass acno without ' , it do not show any record. But when i run the report and pass acno with ' then able to show the records.
for example the value i key in
with ' = ' 9'
without ' = 9
So how i can solve it by pass the acno without ' but the record still able to show?
thks
Message was edited by:
user569740
Message was edited by:
user569740Hi Nick,
It occurs because an argument of the DTExec commands must be enclosed in quotation marks if it contains a space. From the dtexe (SSIS Tool): Syntax Rules section of the
dtexec Utility (SSIS Tool) document, we can see:
All options must start with a slash (/) or a minus sign (-). The options that are shown here start with a slash (/), but the minus sign (-) can be substituted.
An argument must be enclosed in quotation marks if it contains a space. If the argument is not enclosed in quotation marks, the argument cannot contain white space.
Doubled quotation marks within quoted strings represent escaped single quotation marks.
Options and arguments are not case-sensitive, except for passwords.
So, you need to make the value of the variable @QUERY_STRING within double quotes in the value of the variable @Cmd or remove the space within the @QUERY_STRING value.
Regards,
Mike Yin
TechNet Community Support -
Replacing # with blank space in Bex Analyser
Hi All,
Can any one help me out in replacing # values in Bex analyser with blank space.
I tried with the macro:
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
' First Query in the workbook
If queryID = "SAPBEXq0001" Then
' Selects the area where the report query is rendered
resultArea.Select
'Replace "" with 0
Selection.Cells.Replace What:="", Replacement:="0", LookAt:=xlWhole, _ SearchOrder:=xlByRows, MatchCase:=False, MatchByte:=True
End If
End Sub
Means I have include the macro to the Excel, but still it is not working.
If this macro is the correct solution, then may be I am not using it properly(in the sense I'm not calling with proper syntax).
Please provide me with the solutiuon to get rid of this problem.Hi,
We are using BEX 7.0.
I got a macro code which is working. The code is as follows.
Dim resultArea As Range
Set resultArea = varname(1)
Dim c As Range
For Each c In resultArea.Cells
If c.Value = "#" Then c.Value = " "
Next c
This works fine but the problem is that this macro code should be added each and every time when the query is run.
Can any one suggest me where the code can be added in Bex Analyzer itself, so that when the query is run the above macro runs along with it and removes the #.
Thanks and Regards,
Geetha. -
Change Filenames with blank spaces in the Filename
I want to change many filenames with blank spaces and replace
blank spaces with underbar character.
Example:
File One change to File_One
File Two change to File_Two
Here is my script:
for file in `ls`
do
i=`ls -1 *" "*`
b=`ls -1 *" "* | sed -e s/\ /_/g`
done
mv "$i" $b
Please advise what is wrong with my script that isnt
working. The script works if I only have one filename
with a blank space. But if I have several filenames
with blank spaces in the name then it doesnt work.I want to change many filenames with blank spaces and replace
blank spaces with underbar character.
Example:
File One change to File_One
File Two change to File_Two
Here is my script:
for file in `ls`
do
i=`ls -1 *" "*`
b=`ls -1 *" "* | sed -e s/\ /_/g`
done
mv "$i" $b
Please advise what is wrong with my script that isnt
working. The script works if I only have one filename
with a blank space. But if I have several filenames
with blank spaces in the name then it doesnt work. -
Adobe Pro XI deletes and/or replaces letters with blank spaces or an x
How do I fix the problem where Adobe Pro XI deletes and/or replaces letters with blank spaces or an x.
This is really annoying to have to go back to each thing I type into a document and re-choose the fonts to get them to be correct.
Thanks for your help!Adobe is a company, not a program... do you mean ACROBAT Pro?
If yes, this is the Premiere Pro video editing forum, you need to go to http://forums.adobe.com/community/acrobat -
Work with text with blank spaces, how separate text?
Hi:
I have a problem in abap programming, I hope you could help me.
I have a txt file, with a code and its description. I have this file uploaded to a sap internal table, in same field of internal table are code and description.
The problem is next: I need only the code, not the description, but length of code is not constant, and it is separated from description for at least two blank spaces. The code contains also a blank.
Do you know how I can take only the code until these two blanks spaces? Any abap function, any idea..?
Thanks in advance for your help.Hi,
You could use split. if you code always contain a blank space then you won't have any problem.
data: a(30).
data: b(10).
data: c(10).
data: d(10).
a = 'XY ABCDEF EFGHI'.
SPLIT a at space into b c d.
Regards,
Nitin. -
String Manipulation with blank space at the end
Hi All,
DATA: str1(999),
a(10),
b(10).
DATA: len TYPE i.
a = 'Welcome'.
b = 'To all'.
CONCATENATE a b INTO str1 RESPECTING BLANKS.
len = STRLEN( str1 ).
WRITE: len.
result : 16.
If I declared str1 as string result is 20. Because in above case empty space is truncated at last .
So any otherway to getting result 20 with out declaring str1 as string.Hi vinoth ,
To get spaces at last ,
data : str1 type char10 ,
len type i .
str1 = 'the ' . " space given by pressing space bar button
len = STRLEN( str1 ). " in len we get it as 3 , coz 'the ' is 3 only .
str1 = 'the ' . " space given by pressing ALT 2 5 5
len = STRLEN( str1 ). " in len we get it as 4 , coz 'the ' is 3 and 1 space is given by pressing ALT 255 .
This works,
Hope it might be helpfull,
Regards,
Aby -
How do I delete the blank space at the beginning or end of a project?
I constantly end up with blank space at the beginning or end of a project - how do I remove it? I get this ALL the time and I jsut can't get rid of it. Obviously I want my project to start at 0.00 not at 1.xx.
Thanks.That's not a project. You're inside an multicam angle editor. You need to edit the multicam clip into a project. That's where you edit it.
-
Lots of blank space when printing array with only last element printed
I have a slight problem I have been trying to figure it out for days but can't see where my problem is, its probably staring me in the face but just can't seem to see it.
I am trying to print out my 2 dimensional array outdie my try block. Inside the trying block I have two for loops in for the arrays. Within the second for loop I have a while to put token from Stringtokeniser into my 2 arrays. When I print my arrays in this while bit it prints fine however when I print outside the try block it only print the last element and lots of blank space before the element.
Below is the code, hope you guys can see the problem. Thank you in advance
import java.io.*;
import java.net.*;
import java.lang.*;
import java.util.*;
import javax.swing.*;
public class javaflights4
public static final String MESSAGE_SEPERATOR = "#";
public static final String MESSAGE_SEPERATOR1 = "*";
public static void main(String[] args) throws IOException
String data = null;
File file;
BufferedReader reader = null;
file = new File("datafile.txt");
String flights[] [];
//String flightdata[];
flights = new String[21][7];
int x = 0;
//flightdata = new String[7];
int y = 0;
try
reader = new BufferedReader(new FileReader(file));
//data = reader.readLine();
while((data = reader.readLine())!= null)
data.trim();
StringTokenizer tokenised = new StringTokenizer(data, MESSAGE_SEPERATOR1);
for(x = 0; x<=flights.length; x++)
for(y = 0; y<=flights.length; y++)
while(tokenised.hasMoreTokens())
//System.out.println(tokenised.nextToken());
flights [x] [y] = tokenised.nextToken();
//System.out.print("*"+ flights [x] [y]+"&");
System.out.println();
catch(ArrayIndexOutOfBoundsException e1)
System.out.println("error at " + e1);
catch(Exception e)
finally
try
reader.close();
catch(Exception e)
int i = 0;
int j = 0;
System.out.print(flights [j]);
//System.out.println();A number of problems.
First, I bet you see a lot of "error at" messages, don't you? You create a 21x7 array, then go through the first array up to 21, going through the second one all the way to 21 as well.
your second for loop should go to flights[x].length, not flights.length. That will eliminate the need for ArrayIndexOutOfBounds checking, which should have been an indication that you were doing something wrong.
Second, when you get to flights[0][0] (the very first iteration of the inner loop) you are taking every element from the StringTokenizer and setting flights[0][0] to each, thereby overwriting the previous one. There will be nothing in the StringTokenizer left for any of the other (21x7)-1=146 array elements. At the end of all the loops, the very first element in the array (flights[0][0]) should contain the last token in the file.
At the end, you only print the first element (i=0, j=0, println(flight[ i][j])) which explains why you see the last element from the file.
I'm assuming you have a file with 21 lines, each of which has 7 items on the line. Here is some pseudo-code to help you out:
count the lines
reset the file
create a 2d array with the first dimension set to the number of lines.
int i = 0;
while (read a line) {
Tokenize the line;
count the tokens;
create an array whose size is the number of tokens;
stuff the tokens into the array;
set flights[i++] to this array;
} -
Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.
Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom -
How to generate blank spaces at end of the record in a flat file with fixed
Hi,
I am generating a flat file with fixed length.
In my ABAP program, i am able to see the spaces at the end of the recors in debug but when download to applicaiton server i am not able to see those spaces.
How can i generate blank spaces at the end of the record in a flat file?
Please update
Thank youHow are you downloading the file? And, How are you looking at the file on the application server?
Can you provide snippets of your code?
Cheers
John -
My iPad keyboard (spontaneously?) divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them. The entire keyboard also became smaller. How can I get it back to normal?
You can also turn OFF Split Keyboard
Settings>General>Keyboard>Split Keyboard>OFF
Maybe you are looking for
-
import javax.swing.*; import javax.swing.event.*; import java.awt.*; import java.awt.event.*; public class myProject extends JFrame implements ActionListener{ JButton search=new JButton("Search"); public DefaultListModel df=new Defau
-
PI 7.4: wrong logical system
I am configuring a managed system (SAP Netweaver 7.4) which will be used as PI Development system. However, in step 10 "Create Logical Components" (Solution Manager 7.1), the development system that appears is BWD:001, which correspond to another sys
-
Signing applets, going crazy
hi, I think I've posted enough thread on signed applets and still haven't got the solution and i'm the strong believer that any sought of problem will be solved in the forums, and I still believe in that. Ok! I don't wan't to bore u, here is my probl
-
What are 'Qualifier' in XML ???/
Hi, I have, may be, a very basic question on XML. What are Qualifiers which i see in some of XML documents and how can we relate it to a oracle table column. for example in one of oracle Exchange XML i saw this: <OPERAMT qualifier="UNIT" type="T"> <O
-
Autocomplete in Address Book 10.4?
I have Mac OS 10.2 running on an old iMac, and the Address Book program has an autocomplete function for entering addresses. What happened to this in 10.4? I don't find a way to turn it on.