Condition Table Functioning Query !!

Dear All
EG:
If I take standard condition table 5 , customer/ material.
When I see fields in access Sequence it shows KUNNR, MATNR, VKORG and VTWEG.
but When i create own customized condition table say 620, customer / master
then The fields in access sequence show only KUNNR, MATNR.
Can anyone highlight why system behaves differently in customization ?
Regards
Pavan Kumar

dear friend,
i would use the following steps:
-create a new cond. table (say, 620) by copying from '005'
-maintain a new access sequence (say, ZXXX) by copying from standard one (select which one you need) and confirming "copy all"
-setup a new cond.table 620 in this new access sequence (and remove other cond. tables if you do not need them)
-perform other relevant config steps and test your price procedure with new sales order
good luck!
i can't answer your question because it is not clear which access sequence you took and how did you try to change it...
did you also check out the setting for your new cond. table?

Similar Messages

Query performance improvement using pipelined table function

Hi,
I have got two select queries one is like...
select * from table
another is using pielined table function
select *
from table(pipelined_function(cursor(select * from table)))
which query will return result set more faster????????
suggest methods for retrieving dataset more faster (using pipelined table function) than a normal select query.
rgds
somy

Compare the performance between these solutions:
create table big as select * from all_objects;
First test the performance of a normal select statement:
begin
for r in (select * from big) loop
   null;
end loop;
end;
/Second a pipelined function:
create type rc_vars as object
(OWNER VARCHAR2(30)
,OBJECT_NAME     VARCHAR2(30));
create or replace type rc_vars_table as table of rc_vars ;
create or replace
function rc_get_vars
return rc_vars_table
pipelined
as
cursor c_aobj
         is
         select owner, object_name
         from   big;
l_aobj c_aobj%rowtype;
begin
for r_aobj in c_aobj loop
    pipe row(rc_vars(r_aobj.owner,r_aobj.object_name));
end loop;
return;
end;
/Test the performance of the pipelined function:
begin
for r in (select * from table(rc_get_vars)) loop
   null;
end loop;
end;
/On my system the simple select-statement is 20 times faster.
Correction: It is 10 times faster, not 20.
Message was edited by:
wateenmooiedag

Can I use table function inside Dynamic query ?

Dear Gurus,
I have following code
DECLARE
TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20);
OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/
QUERY_STRING VARCHAR2(4000);
BEGIN
OtherNoList := CRITERIA_LIST_TABLE();
SELECT DISTINCT REGEXP_SUBSTR('1,5,6,4', '[^\,]+',1, LEVEL ) BULK COLLECT INTO OtherNoList
FROM DUAL
CONNECT BY LEVEL <= REGEXP_COUNT('1,5,6,4', '\,') + 1 ;
QUERY_STRING := 'INSERT INTO TAB1 (C1,C2) '||
'SELECT C1,'||
'C2 '||
'FROM TAB1 ,'||
'TABLE( '||
'CAST (OtherNoList AS CRITERIA_LIST_TABLE) '||
') OTHRNOS '||
'WHERE TAB1.C1 = OTHRNOS.COLUMN_VALUE ';
DBMS_OUTPUT.PUT_LINE('Query String is '||QUERY_STRING);
EXECUTE IMMEDIATE QUERY_STRING;
END;
Can I use Table function inside dynamic query.
Thanking in advance
Sanjeev

Try:
DECLARE
TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20);
OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/
QUERY_STRING VARCHAR2(4000);
BEGIN
OtherNoList := CRITERIA_LIST_TABLE();
SELECT DISTINCT REGEXP_SUBSTR('1,5,6,4', '[^\,]+',1, LEVEL ) BULK COLLECT INTO OtherNoList
FROM DUAL
CONNECT BY LEVEL <= REGEXP_COUNT('1,5,6,4', '\,') + 1 ;
QUERY_STRING := 'INSERT INTO TAB1 (C1,C2) '||
'SELECT C1,'||
'C2 '||
'FROM TAB1 ,'||
'TABLE( '||
'CAST (:OtherNoList AS CRITERIA_LIST_TABLE) '||
') OTHRNOS '||
'WHERE TAB1.C1 = OTHRNOS.COLUMN_VALUE ';
DBMS_OUTPUT.PUT_LINE('Query String is '||QUERY_STRING);
EXECUTE IMMEDIATE QUERY_STRING using OtherNoList;
END;p.s. not tested
Amiel Davis

SQL Server Multiple JOINS with Table Value Function - query never ends

I have a query with 4 joins using a table value function to get the data and when I execute it the query never ends.
Issue Details
- Table value function
CREATE FUNCTION [dbo].[GetIndicator]
@indicator varchar(50),
@refDate datetime
RETURNS
TABLE
AS
RETURN
SELECT
T1.Id ,T1.ColINT_1, T1.ColNVARCHAR_1 collate DATABASE_DEFAULT as ColNVARCHAR_1 ,T1.ColNVARCHAR_2 ,T1.ColSMALLDATETIME_1, T1.ColDECIMAL_1, T1.ColDECIMAL_1
FROM TABLE2 T2
JOIN TABLE3 T3
ON T2.COLFKT3 = T3.Id
AND T3.ReferenceDate = @RefDate
AND T3.State != 'Deleted'
JOIN TABLE4 T4
ON T2.COLFKT4 = T4.Id AND T4.Name=@indicator
JOIN TABLE1 T1
ON T2.COLFKT1=T1.Id
- Query
DECLARE @RefDate datetime
SET @RefDate = '30 April 2014 23:59:59'
SELECT DISTINCT OTHERTABLE.Id As Id
FROM
GetIndicator('ID#1_0#INDICATOR_X',@RefDate) AS OTHERTABLE
JOIN GetIndicator('ID#1_0#INDICATOR_Y',@RefDate) AS YTABLE
ON OTHERTABLE.SomeId=YTABLE.SomeId
AND OTHERTABLE.DateOfEntry=YTABLE.DateOfEntry
JOIN GetIndicator('ID#1_0#INDICATOR_Z',@RefDate) AS ZTABLE
ON OTHERTABLE.SomeId=ZTABLE.SomeId
AND OTHERTABLE.DateOfEntry=ZTABLE.DateOfEntry
JOIN GetIndicator('ID#1_0#INDICATOR_W',@RefDate) AS WTABLE
ON OTHERTABLE.SomeId=WTABLE.SomeId
AND OTHERTABLE.DateOfEntry=WTABLE.DateOfEntry
JOIN GetIndicator('ID#1_0#INDICATOR_A',@RefDate) AS ATABLE
ON OTHERTABLE.SomeId=ATABLE.SomeId
AND OTHERTABLE.DateOfEntry=ATABLE.DateOfEntry
Other details:
- SQL server version: 2008 R2
- If I execute the table function code outside the query, with the same args, the execution time is less the 1s.
- Each table function call return between 250 and 500 rows.

Hi,
Calling function in general is a costly query. And definitely joining with a function 5 times in not an efficient one.
1. You can populate the results for all parameters in a CTE or table variable or temporary table and join (instead of funtion) for different parameters
2. Looks like you want fetch the IDs falling to different indicators for the same @Refdate. You can try something like this
WITH CTE
AS
SELECT
T1.Id ,T1.ColINT_1, T1.ColNVARCHAR_1 collate DATABASE_DEFAULT as ColNVARCHAR_1 ,T1.ColNVARCHAR_2 ,T1.ColSMALLDATETIME_1, T1.ColDECIMAL_1, T1.ColDECIMAL_1, T4.Name
FROM TABLE2 T2
JOIN TABLE3 T3
ON T2.COLFKT3 = T3.Id
AND T3.ReferenceDate = @RefDate
AND T3.State != 'Deleted'
JOIN TABLE4 T4
ON T2.COLFKT4 = T4.Id AND T4.Name=@indicator
JOIN TABLE1 T1
ON T2.COLFKT1=T1.Id
SELECT * FROM CTE WHERE Name = 'ID#1_0#INDICATOR_X' AND Name = 'ID#1_0#INDICATOR_Y' AND Name = 'ID#1_0#INDICATOR_Z' AND Name = 'ID#1_0#INDICATOR_W' AND Name = 'ID#1_0#INDICATOR_A' AND ReferenceDate = @RefDate.
Or you can even simplify more depends on your requirement.
Regards,
Brindha.

VO query with SQL table function (MS SQL) and update of parameter value

Hello All,
I use VO where Query is the SQL function that returns a table (MS SQL Server):
select * from getData('XXXX')
where ‘ХХХХ’ should be binded to the specific ID (e.g. selected row in the tree view on the another facet).
More details: I have two facets. Left facet contains a tree view that displays the list of the projects grouped by industry. Right facet contains a pivot table (source query is a ‘table function’ from above).
I want to have the pivot table (right facet) to be updated with the data specific to the project (selected row in the tree).
I know about the possibility to dynamically update the where clause (setNamedWhereClauseParam method), but in my case there is no ‘where’ clause. Is there any kind of ‘bind variable’ to be used to refresh the data?
Any guidance, ideas, examples are greatly welcome.
With best wishes,
Anatol

Are the columns that are being selected different each time or the same?
If they are the same then you don't need to do any additional binding - the pivot table is connected to the VO at design time and it wouldn't care if the underlying from/where have changed.
If on the other hand your columns change (but the number of them stay the same) then use aliases for the initial definition (select ename a, id b, salary c) and then when you change the VO change the mapping but keep the names (select dname a, moo b, foo c).
If the whole query is changing and you don't know in advance the structure - then there is no out of the box solution with a pivot table - you'll need to code a backing bean that will provide the data model to the pivot table based on your query.

How to add join conditions in ABAP Query.

Hi,
I need a help on "ABAP Query".
How to add join conditions in ABAP Query.
Thanks in advance.
Thanks & Regards,
Ramana

Hi,
See below code,
*& Report ZRNP_ALV_SO
REPORT zrnp_alv_so MESSAGE-ID z7rnp .
INCLUDE zrnp_include .
*SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
 s_auart FOR v_auart ,
 s_vkorg FOR v_vkorg ,
 s_spart FOR v_spart ,
 s_kunnr FOR v_kunnr ,
 s_matnr FOR v_matnr .
SELECTION-SCREEN END OF BLOCK blk1 .
*AT SELECTION SCREEN *
AT SELECTION-SCREEN.
SELECT SINGLE vbeln
 FROM vbak INTO vbak-vbeln
 WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
 MESSAGE e202.
ENDIF.
*START OF SELECTION *
START-OF-SELECTION .
PERFORM data_select.
PERFORM t_sort USING i_sort .
PERFORM event_cat USING i_event .
PERFORM fld_cat USING i_fldcat[] .
PERFORM t_layout USING i_layout .
PERFORM fld_cat2 USING i_fldcat2[] .
PERFORM call_alv.
* DATA SELECT *
*& Form DATA_SELECT
* text
* --> p1 text
* <-- p2 text
FORM data_select .
REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
BREAK-POINT.
*SELECT*
 *a~vbeln*
 *a~auart*
 *a~vkorg*
 *a~spart*
 *a~kunnr*
 *b~posnr*
 *b~matnr*
 *c~maktx*
 *b~kwmeng*
 *b~vrkme*
 *INTO TABLE it_so1 FROM vbak AS a*
 *INNER JOIN vbap AS b ON b~vbeln = a~vbeln*
 *INNER JOIN makt AS c ON c~matnr = b~matnr*
 *AND c~spras = sy-langu*
 *WHERE a~vbeln IN s_vbeln .*
IF sy-subrc = 0.
 SORT it_so1 BY vbeln.
 DELETE ADJACENT DUPLICATES FROM it_so1.
ENDIF.
* COLURING DISPLAY *
DATA: ld_color(1) TYPE c .
* LOOP AT it_so1 INTO wa_so.
* Populate color variable with colour properties
* Char 1 = C (This is a color property)
* Char 2 = 3 (Color codes: 1 - 7)
* Char 3 = Intensified on/off ( 1 or 0 )
* Char 4 = Inverse display on/off ( 1 or 0 )
* i.e. wa_ekko-line_color = 'C410'
* ld_color = ld_color + 1.
* Only 7 colours so need to reset color value
* IF ld_color = 8.
* ld_color = 1.
* ENDIF.
* CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
** wa_ekko-line_color = 'C410'.
* MODIFY it_so1 FROM wa_so.
* ENDLOOP .
* IF sy-subrc = 0.
IF NOT it_so1[] IS INITIAL.
 SELECT vbelv
 posnv
 vbeln
 posnn
 vbtyp_n
 INTO TABLE it_vbfa
 FROM vbfa
 FOR ALL ENTRIES IN it_so1
 WHERE vbelv = it_so1-vbeln
 AND posnn = it_so1-posnr
 AND vbtyp_n ='J' .
 IF sy-subrc = 0.
 SELECT vbeln
 posnr
 matnr
 werks
 lgort
 charg
 lfimg
 vrkme
 FROM lips INTO TABLE it_del_ful
 FOR ALL ENTRIES IN it_vbfa
 WHERE vbeln = it_vbfa-vbeln
 AND posnr = it_vbfa-posnn.
 ENDIF.
ENDIF.
ENDFORM. " DATA_SELECT
**************** EVENT CATALOG ****************************************
*& Form EVENT_CAT
* text
* -->P_I_EVENT text
FORM event_cat USING p_i_event TYPE slis_t_event .
REFRESH p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
* EXPORTING
* I_LIST_TYPE = 0
 IMPORTING
 et_events = p_i_event
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
IF sy-subrc = 0.
 MOVE 'TOP_OF_PAGE' TO t_event-form.
 MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
ENDIF.
CLEAR t_event .
ENDFORM. " EVENT_CAT
**********FORM FOR EVENT TOP_OF_PAGE**********************************
FORM top_of_page .
REFRESH i_listheader.
DATA: t_header TYPE slis_listheader.
DATA: v_text(50).
WRITE sy-datum TO v_text.
CLEAR t_header.
t_header-typ = 'S'.
t_header-key = "Date".
t_header-info = v_text.
APPEND t_header TO i_listheader.
CLEAR t_header.
CLEAR v_text.
WRITE: 'SALES ORDER & DELIVERY DETAILS REPORT ' TO v_text .
t_header-typ = 'S'.
t_header-key = 'TITLE'.
t_header-info = v_text.
APPEND t_header TO i_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = i_listheader.
* I_LOGO = 'ALV_BACKGROUND'.
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
******** FIRST ALV GRID DISPLAY ***************************************
FORM call_alv .
* FORM TO MAKE THE CELL CONTENTS INVISIBLE.
* PERFORM INVISIBLE_CELL_CONTENTS. *
*EXCLUDE-DECLARATION.
CLEAR wa_exclude.
wa_exclude-fcode = '&VEXCEL'.
APPEND wa_exclude TO i_exclude.
*& Form CALL_ALV
* text
* --> p1 text
* <-- p2 text
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 i_callback_user_command = 'USER_COMMAND1'
 i_callback_top_of_page = 'TOP_OF_PAGE'
 i_background_id = 'ALV_BACKGROUND'
 is_layout = i_layout
 it_fieldcat = i_fldcat[]
 it_excluding = i_exclude
 it_sort = i_sort
 it_events = i_event
 TABLES
 t_outtab = it_so1
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM. " CALL_ALV
************** FIRST FIELDCATALOG *************************************
*& Form FLD_CAT
* text
* -->P_I_FLDCAT[] text
FORM fld_cat USING p_i_fldcat TYPE slis_t_fieldcat_alv.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m = 'SALES ORDER NO.'.
i_fldcat-col_pos = 1. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-hotspot = 'X'.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m = 'SALES DOC. TYPE'.
i_fldcat-col_pos = 2. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES ORG.'.
i_fldcat-col_pos = 3. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 12. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'DIVISION'.
i_fldcat-col_pos = 4. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SOLD TO PARTY'.
i_fldcat-col_pos = 5. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES DOC. ITEM'.
i_fldcat-col_pos = 6. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 17. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'MATERIAL NO.'.
i_fldcat-col_pos = 7. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'DESCRIPTION'.
i_fldcat-col_pos = 8. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'QUANTITY'.
i_fldcat-col_pos = 9. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-do_sum = 'X'. " For doing "SUM"
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES UNIT'.
i_fldcat-col_pos = 10. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
ENDFORM. " FLD_CAT
****************** ALV SORTING ***************************************
*& Form SORT
* text
* -->P_I_SORT text
FORM t_sort USING p_i_sort TYPE slis_t_sortinfo_alv .
DATA: i_sort TYPE slis_sortinfo_alv .
REFRESH p_i_sort .
CLEAR i_sort.
i_sort-spos = 1.
i_sort-tabname = 'IT_SO1'.
i_sort-fieldname = 'VBELN'.
i_sort-up = 'X'.
i_sort-subtot = 'X'.
i_sort-group = '*'.
APPEND i_sort TO p_i_sort.
ENDFORM. " SORT
*FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
* SET PF-STATUS 'ZSTANDARD'.
*ENDFORM. "Set_pf_status
***********FORM FOR EVENT USER_COMMAND1********************************
FORM user_command1 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
*CASE R_UCOMM .
* WHEN '&IC1' .
* IF rs_selfield-FIELDNAME = 'VBELN' .
* ENDIF .
* WHEN OTHERS .
* ENDCASE .
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
 READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
 IF sy-subrc = 0.
 LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
 AND posnv = wa_so-posnr.
 READ TABLE it_del_ful INTO wa_it_del_ful
 WITH KEY vbeln = wa_vbfa-vbelv
 posnr = wa_vbfa-posnn.
 IF sy-subrc = 0.
 CLEAR wa_del.
 MOVE wa_it_del_ful TO wa_del.
 APPEND wa_del TO it_del1.
 ENDIF.
 ENDLOOP.
 ENDIF.
ENDIF.
********* SECOND ALV GRID DISPLAY ***********************************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 i_callback_user_command = 'USER_COMMAND2'
 i_callback_top_of_page = 'TOP_OF_PAGE'
 i_background_id = 'ALV_BACKGROUND'
 it_fieldcat = i_fldcat2[]
 it_sort = i_sort
 TABLES
 t_outtab = it_del_ful
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM . "USER_COMMAND1
********** FORM FOR EVENT USER_COMMAND 2 ******************************
FORM user_command2 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
 READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
* IF SY-SUBRC = 0.
* LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
* AND posnv = WA_SO-posnr.
 READ TABLE it_del_ful INTO wa_it_del_ful
 WITH KEY vbeln = rs_selfield-value
 " vbeln = wa_vbfa-vbeln
 posnr = wa_vbfa-posnn.
 IF rs_selfield-fieldname = 'VBELN'.
 SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
 CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
 ENDIF .
* ENDLOOP.
* ENDIF.
ENDIF.
ENDFORM . "USER_COMMAND2
********* SECOND FIELDCATALOG ******************************************
*& Form FLD_CAT2
* text
* -->P_I_FLDCAT2[] text
FORM fld_cat2 USING p_i_fldcat2 TYPE slis_t_fieldcat_alv .
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-tabname = 'IT_DEL_FUL'."TABLE NAME
i_fldcat2-seltext_m = 'DELIVERY NO.'.
i_fldcat2-col_pos = 1. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-hotspot = 'X'.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'DELIVERY ITEM'.
i_fldcat2-col_pos = 2. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'MATERIAL NO.'.
i_fldcat2-col_pos = 3. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'PLANT.'.
i_fldcat2-col_pos = 4. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'ST. LOCATION'.
i_fldcat2-col_pos = 5. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'BATCH NO.'.
i_fldcat2-col_pos = 6. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'ACT. DEL. QTY.'.
i_fldcat2-col_pos = 7. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'SALES UNIT.'.
i_fldcat2-col_pos = 8. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
ENDFORM. " FLD_CAT2
***************** ALV LAYOUT *******************************************
*& Form LAYOUT
* text
* -->P_I_LAYOUT text
FORM t_layout USING p_i_layout TYPE slis_layout_alv .
p_i_layout-zebra = 'X'.
p_i_layout-totals_text = 'GRAND TOTAL ='.
* p_i_layout-CONFIRMATION_PROMPT = 'X'.
* p_i_layout-DEF_STATUS = ' '.
p_i_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " LAYOUT

TABLE FUNCTION OR CAST WITH TABLE FUNCTION

Consider following scenario:
I've a function which returns nested table of employees.
I am calling this function in some other procedure and building a query dynamically.
Sample code looks like
CREATE OR REPLACE PROCEDURE TEST_PROC( P_EMP_ID   IN   NUMBER,
                                        O_EMP_LIST OUT SYS_REFCURSOR) IS
v_tbl_emp_id       tbl_emp_id;
begin
v_tbl_emp_id := fn_get_usr_list (P_EMP_ID);--fetches employee id reporting to given emp id
v_select_clause :=
         'SELECT EMP_NO,EMP_NAME,DEPT_NO';
v_from_clause := ' FROM EMP';
v_where_clause1 :=
            ' WHERE emp_no IN (
                      SELECT COLUMN_VALUE
                                 FROM TABLE
                                         (CAST
                                             (:v_tbl_emp_id AS tbl_emp_id
--AND I AM APPENDING AND CLAUSES BASED ON VARIOUS CONDITION
v_qry :=     v_select_clause || v_from_clause|| v_where_clause1;
OPEN O_EMP_LIST FOR v_qry USING v_tbl_emp_id;
END TEST_PROC;I CAN REWRITE THE SAME CODE AS
CREATE OR REPLACE PROCEDURE TEST_PROC( P_EMP_ID   IN   NUMBER,
                                        O_EMP_LIST OUT SYS_REFCURSOR) IS
begin
v_select_clause :=
         'SELECT EMP_NO,EMP_NAME,DEPT_NO';
v_from_clause := ' FROM EMP';
v_where_clause1 :=
            ' WHERE emp_no IN (
                      SELECT COLUMN_VALUE
                                 FROM TABLE(fn_get_usr_list (:P_EMP_ID)))';
--AND I AM APPENDING AND CLAUSES BASED ON VARIOUS CONDITION
v_qry :=     v_select_clause || v_from_clause|| v_where_clause1;
OPEN O_EMP_LIST FOR v_qry USING P_EMP_ID;
END TEST_PROC;Now I would like to know which one performs better
USING TABLE ALONE OR USING CAST ALONG WITH THE TABLE FUNCTION?
AND PLEASE HELP ME ON FORMATTING CODE.
I've added tags still its not formatting!!
Thanks,
NM
Edited by: user10862473 on Apr 11, 2011 12:14 AM
Edited by: BluShadow on 11-Apr-2011 09:13
fixed {noformat}{noformat} tags

To be sure which is better you will have to test them both. You can use either AUTOTRACE or Oracle trace (tkprof) to get run metrics - system resources used when running both versions of the query. AUTOTRACE won't provide CPU information, but if you can find the qieries in (G)V$SQL you can find it there. Oracle trace is more effort but should provide more metrics. I could do it if I have privileges :(..
All I can do is check the time taken by the both procedures using set timing on, which gives same result for both.
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.07Thanks,
NM

Table function on a collection in Dynamic SQL

Hello,
I am trying to create a refcursor by selecting from a collection using table function.
If I use the Select statement the query executes, but if I put the Select statement in a string
the collection variable does not get resolved. The resaon I am putiing it in a string is because the
WHERE clause will be passed a parameter. The code below is an anonymous block but will be changed to a
procedure once I get it to work.
I have tried many different ways but was unsuccessful.
Please see if anybody cann assist or what I am trying to achive is not possible, so provide an alternative.
The error I am getting is
ORA-00904: "V_ALARM_REC_TABLE": invalid identifier
ORA-06512: at line 50
Thanks.
Bimal
DECLARE
TYPE c_refcurtype IS REF CURSOR;
x c_refcurtype;
p_recordset c_refcurtype;
v_rec mc2_dev2.mc2_alarm_rec_type := mc2_dev2.mc2_alarm_rec_type(null,null,null,null,null,null,null,null,
null,null,null,null,null,null,null,null,
null,null,null,null,null,null,null);
v_alarm_rec_table mc2_dev2.mc2_alarm_rec_table := mc2_dev2.mc2_alarm_rec_table();
v_select varchar2(200) := 'select a.* from ';
v_table varchar2(200) := 'table(v_alarm_rec_table) a ';
v_where varchar2(200) := 'where a.alarm_rule_def_uid = 9';
v_query varchar2(32000);
BEGIN
MC2_ALARM.create_mc2_alarm(x, 1); --- ( X is a refcursor, which I will use to populate v_alarm_rec_table a (nested table collection)
LOOP
FETCH x INTO v_rec.record_cnt,
v_rec.rn,
v_rec.alarm_precision_order,
v_rec.alarm_rule_def_uid,
v_rec.alarm_type_def_uid,
v_rec.alarm_rule_scope_uid,
v_rec.trigger_tpl_master_uid,
v_rec.alarm_scope_def_uid,
v_rec.alarm_object_uid,
v_rec.error_type,
v_rec.all_error_codes,
v_rec.enabled,
v_rec.start_hour,
v_rec.end_hour,
v_rec.day_type,
v_rec.alarm_severity_def_uid,
v_rec.on_watch_duration,
v_rec.update_on_status_change,
v_rec.log_ind,
v_rec.email_to,
v_rec.email_from,
v_rec.send_email,
v_rec.stale_period;
EXIT WHEN x%NOTFOUND;
v_alarm_rec_table.extend;
v_alarm_rec_table(v_alarm_rec_table.last) := v_rec;
END LOOP;
CLOSE x;
v_query := v_select||v_table||v_where; -- ERROR OCCURS AT THIS LINE as it cannot resolve the TABLE name v_alarm_rec_table)
dbms_output.put_line('sql: '||v_query);
OPEN p_recordset FOR v_query;
LOOP
FETCH p_recordset INTO v_rec.record_cnt,
v_rec.rn,
v_rec.alarm_precision_order,
v_rec.alarm_rule_def_uid,
v_rec.alarm_type_def_uid,
v_rec.alarm_rule_scope_uid,
v_rec.trigger_tpl_master_uid,
v_rec.alarm_scope_def_uid,
v_rec.alarm_object_uid,
v_rec.error_type,
v_rec.all_error_codes,
v_rec.enabled,
v_rec.start_hour,
v_rec.end_hour,
v_rec.day_type,
v_rec.alarm_severity_def_uid,
v_rec.on_watch_duration,
v_rec.update_on_status_change,
v_rec.log_ind,
v_rec.email_to,
v_rec.email_from,
v_rec.send_email,
v_rec.stale_period;
EXIT WHEN p_recordset%NOTFOUND;
some dbms_output statements...
END LOOP;
END;
The error I am getting is
ORA-00904: "V_ALARM_REC_TABLE": invalid identifier
ORA-06512: at line 50

Thanks Timur/Solomon,
mc2_dev2 is the schema name.
mc2_alarm_rec_table is a SQL type.
Here are the scripts:
CREATE OR REPLACE TYPE MC2_DEV2.mc2_alarm_rec_type IS OBJECT
( record_cnt NUMBER,
rn number,
alarm_precision_order NUMBER(6),
alarm_rule_def_uid NUMBER(6),
alarm_type_def_uid NUMBER(6),
alarm_rule_scope_uid NUMBER(6),
trigger_tpl_master_uid NUMBER(6),
alarm_scope_def_uid NUMBER(6),
alarm_object_uid NUMBER(6),
error_type VARCHAR2(1),
all_error_codes VARCHAR2(1),
enabled VARCHAR2(1),
start_hour NUMBER(2),
end_hour NUMBER(2),
day_type NUMBER(2),
alarm_severity_def_uid NUMBER(6),
on_watch_duration NUMBER(6),
update_on_status_change VARCHAR2(1),
log_ind VARCHAR2(1),
email_to VARCHAR2(128),
email_from VARCHAR2(128),
send_email VARCHAR2(1),
stale_period NUMBER(6)
CREATE OR REPLACE TYPE MC2_DEV2.MC2_ALARM_REC_TABLE IS TABLE OF MC2_DEV2.mc2_alarm_rec_type;
If I popoulate the cursor with the following code:
OPEN p_recordset FOR
select a.* from table (v_alarm_rec_table) a where a.alarm_rule_def_uid = 9;
there is no issue it works just fine.
But when when I use
OPEN p_recordset FOR v_query; ---- where v_query := v_select||v_table||v_where;
the variable v_alarm_rec_table does not get resolved.
Regards,
Bimal

Performance issues with pipelined table functions

I am testing pipelined table functions to be able to re-use the base_query function. Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? The processor function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
 TYPE resultset_typ IS REF CURSOR;
 TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
 TYPE table_typ IS TABLE OF row_typ;
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ;
 c_default_limit CONSTANT PLS_INTEGER := 100;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ
 IS
 o_resultset resultset_typ;
 BEGIN
 OPEN o_resultset FOR
 SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB;
 RETURN o_resultset;
 END base_query;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
 IS
 aa_source_data table_typ;-- := table_typ ();
 BEGIN
 LOOP
 FETCH p_source_data
 BULK COLLECT INTO aa_source_data
 LIMIT p_limit_size;
 EXIT WHEN aa_source_data.COUNT = 0;
 /* Process the batch of (p_limit_size) records... */
 FOR i IN 1 .. aa_source_data.COUNT
 LOOP
 PIPE ROW (aa_source_data (i));
 END LOOP;
 END LOOP;
 CLOSE p_source_data;
 RETURN;
 END processor;
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT /*+ PARALLEL(t, 5) */ colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM TABLE (processor (base_query (argA, argB),100)) t
 GROUP BY colC
 ORDER BY colC
 END with_pipeline;
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM (SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB)
 GROUP BY colC
 ORDER BY colC;
 END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PM

Earthlink wrote:
Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

How to Create a Functiona Query

Dear all,
Could any body detail me how to create a functional query. Please give me step by step procedure to create a query.
I would appreciate if you can give me a material with screen shots. Your help will be highly appreciated.
Thank you
Raghu Ram

Hi Raghu,
Go through this document it may help you,
SAP Query
Step 1: Create User Group SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Group: Initial Screen -
Enter User Group Code (self named)
Click on Create
b) In the User Group (Code): Create or Change pop-up window -
Enter the User Group Description
Click on Save
c) In the Create Object Directory Entry pop-up window -
Ö Click on Local Object button
Ö The User Group Created is saved
Step 2: Create User Group SQ02
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Infosets
a) In the Infoset: Initial screen -
Ö Enter Infoset Code (self named)
Ö Click on Create button
b) In the Infoset: Title & Database Screen -
Ö Enter Description of Infoset in the Name field
Ö In the Data Source selection: Select appropriate Data Source by clicking
the radio button
· Source the data can either be multiple tables OR single table. There are 4
options for the user to select from
Ö Click on Continue (Enter)
Ö Selected Table gets displayed in the Infoset : Initial Screen
c) In the Infoset: Initial Screen -
Ö Click on Insert Table button
d) In the Add Table Screen -
Ö Enter the Table Name that is to be inserted
Ö Click Continue (Enter)
e) In the Infoset: Initial Screen -
Ö Click on Back button
f) In the Field Group Defaults pop-up Screen -
Ö Select Appropriate Field Group Option by clicking on the radio button
· there are 3 options to select from. User can select Empty Field Group
option and then select the data fields in the steps explained further.
Alternatively, User can select an option which clubs all the data fields
From all the tables selected
Ö Click Continue (Enter)
g) In the Change Infoset Screen -
· the left side lists the Tables that the user has selected in step b, c & d
· In the right side, system creates field groups, one for each table listed in the
left part. Initially, the Field Groups are empty
Ö In the Left Side, Click on the arror next to the table name and expand and
display all the data fields in the table
Ö Select a Data Field from the expanded Table view, which is to be added to
the Field Group on the right.
Ö Select a Field Group on the right side, in which Data Field selected above
has to be added
Ö Right click on the Data Field selected and click on Add Field to Field Group
Ö The selected Data Field gets added to the selected Field Group, which is
indicated by an arrow next to the Field Group.
Ö Carry out the steps above to add the required Data Fields to the respective
Field Groups
Ö After transferring Data Fields to Field Groups click on Generate button
h) In the Create Object Directory Entry Screen -
Ö Click on Logical Object button to generate the infoset
i) In the Change Infoset Screen -
Ö Click on the Back button
j) User is taken back to the Infoset: Initial Screen which displays the
created Infoset record.
Step 3: Assigning User Group to Infoset SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Groups: Initial screen -
Ö Enter the User Group for which Infoset is to be assigned
Ö Click on Assign Users & Infosets button
b) In the User Group: Assign Users Screen -
Ö Click on Assign Infosets button
c) In the next screen, select the Infoset, which needs to be attached to the
User Group selected
d) Click on the Back button
Step 4: Creating Query SQ00 & SQ01
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Queries
a) In the Query from User Group: Initial Screen -
Ö Click on Other User Groups button
Ö In the pop-up screen, User Groups, select the User Group for which the
Query has to created. The pop-up screen closes.
Ö Enter the Query Code in the Query field
Ö Click on Create button
b) A pop-up screen Restrict Value Range shows the list of Infosets assigned to
the User Group
Ö Select the Infoset for which Query has to be created
c) In the new screen Create Query: Title, Format -
Ö Enter the Description of the Query in the Title field
Ö Click on the Next Screen button
d) In the Select Field Group screen
Ö Select the Field Groups from which Data Fields have to be selected for the
Output
Ö Click on the Next Screen button
e) In the Select Field screen -
Ö Select the Data Fields, which should appear in the output
Ö Click on the Next Screen button
f) In the Screen Selection -
Ö Select the Data Fields for the selection criteria
Ö Enter the sequence in which the selected fields would appear in the input
screen of the query.
Ö Define if the selection criteria should be Single Value or Multiple Value Range
by clicking in the appropriate check boxes
Ö Click on the Basic List button
g) In the screen Query Layout Design -
Ö Select the Output Fields from the Data Fields section by clicking the
appropriate check box
Ö Change the sequence of Data Field columns if required
Ö Click on the Test button to test the query created
h) On the Test Query screen click Continue
i) In the Query screen -
Ö Enter the selection criteria
Ö Click on Execute button
j) Save the Query created
Step 5: Running the Query SQ00
a) In the Query From User Group: Initial screen
b) Click on Other User Groups button to select the User Group
c) In the pop-up screen User Groups select the User Group
d) System lists all the queries created for the User Group
e) Select the appropriate Query
f) Click on Execute button
g) User is taken to the Selection screen
h) Enter the selection criteria and click on Execute button
i) System runs the query and gives the output
Regards,
Murali.

Populating the condition tables

hi ,
can anyone explain me clearly ,how to populate the condition tables programatically.
its really urgent.
regards,
srikanth tulasi.
Edited by: srikanth tulasi on Apr 9, 2008 11:02 AM

Hi Prabhu,
Thanks for your quick reply. In fact, I am developing a BAPI function Module in which I am sending pricing scales to the external interface. For the same reason, I have to access the condition tables to find out the pricing scales. So, please help me find out the procedure to access the condition table (ex: A001) which comes as a value into my internal table.
Thanks,
John.

Interactive report on view based on pipelined table function.

Hi,
I want to build an Interactive Report on a view.
The view definition contains a select on a pipelined table function. I use context functionality to pass paramaters to the pipelined table function.
A plain select * from #my_view# in SqlPlus results in 121 different rows.
However, If I base my Interactive report on this view, I get 15 repeated rows (all the same).
Is it possible to use pipelined table functionality on an Interactive report? I can't seem to get it working.
If I use the following approach (http://rakeshjsr.blogspot.nl/2010/10/oracle-apex-interactive-report-based-on.html) I do get results, but I can't use this solution for a reason that's not relevant.

Hello,
Is it possible to use pipelined table functionality on an Interactive report? I can't seem to get it working. I have used it in one instance and it works fine. However I was passing the values to pipe-lined function directly.
IR Query..
SELECT * FROM TABLE(fn_pipeline(:P1_ITEM_NAME))Call pipe-lined function from IR query directly (instead of using view)
Try sending values to Pipe-lined function directly. In-case if the problem is with setting and getting values from the context?
Regards,
Hari

New Condition TAble for Inbound Delivery

Hello
i want to maintain a new Condition table for the Inbound delivery picking with the combination of _Delivery type/Plant
so that the Inbound created for the particular plant alone uses the particular output type.
Where in IMG can i configure the new Condition table for this combination for the Inbound delivery ?

Hi,
Go to SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Inbound Deliveries > Here perform following;
- Define Condition Table for Inbound Delivery
- Define Output Types for Inbound Delivery
- Define Access Sequence for Inbound Delivery
- Maintain Output Determination Procedure
- Assign Output Determination Procedures

New Condition Table not working in Sales order

Dear All,
I am facing problem in pricing procedure. I have created new condition table(LIFNR & ROUTE), included Vendor(Fwd Agent) and Route in condition table with sales area. I have added that condition table in access sequence and assigned access sequence to condition type. Then Condition type added into pricing procedure and assigned pricing procedure to document type.
In sales order I've added route and fwd agent but while checking in analysis system does not determine route and fwd agent.
Thanks and Regards,
Kaushal

hi,
i have a query to ask why you need LIFNR in condition table creation.
where in sales order it will trigger automatically.
please check the config settings for route determiantion automatically.
so that if route comes automatically into the sales order then from where you will trigger LIFNR.
please clarify.
regards,
balajia.

Creation of condition table without copy

During creation of Condition table ( without copying any condition from available tables), Is it possible to see all field catalouges available? and if possible then how can we see all fields available to add desired ones into our table?

Hi,
SPRO >Sales and Distribution->Basic Functions>Pricing>Pricing Control-->Define Condition Tables
In the above menu path you can find out the Field catalog what SAP has given if you want to add new field you can add provided
If you done the Enhancements
Regards,
Prasanna

Condition Table Functioning Query !!

Similar Messages

Maybe you are looking for