Conductor collumn?

Hi
Maybe off topic...
I have been importing some classical albums lately, and some albums is almost all about the conductor. He/She is the star of the recording. Example: Herbert Von Karajan. I still don't how, or where, to put the conductor's name in iTunes?.
There is no 'Conductor' option/field in the collumns.
I usually write the conductor's name in 'Comments'.
Anyone else that have this problem?
How do YOU tag your classical albums?.

Ok, I've given up on my old way of tagging. It got all too messy.
So, Here's a very simple - yet very effective way of tagging classical albums:
Title:
work (with opus number or other catalogue, if available) - movement
eg: String Quartet No. 8 in B flat major, D. 112, op 168 - Allegro ma non troppo
Artist:
Composer's name
eg: Schubert
Album:
Record name (or recording location)
eg: String Quartets, Vol 4
Composer:
The full name of the composer
eg: Franz Schubert
Genre:
Classical (as broad as possible)
Comment:
Recording performers, conductor and location (if available).
eg: Berliner Philharmonicer, Herbert Karajan
Note; I have left the 'Album Artist' field blank.

Similar Messages

How to resize the spark datagrid collumns based on the headertext?

Hi friends,
I am using spark datagrid for displaying the tablur data in my application, when i setting the dataprovider property of the datagrid, it displays the content exactally what i expeceted.
but the widht of the collumns are based on the content of the dataprovider, i am not able to see the full collumn name in the datagrid's header. I want to display the full collumn name to the users without setting the collumn width explicitly because the data are dynamically returned from the server. could you pls give me some ideas to acheive this...?
Thanks in advance.

Hi Karthikeyan Subramain,
You can make use of typicalItem proberty to set the column width.
Here is the link for sample code which uses typicalItem:
http://butterfliesandbugs.wordpress.com/2011/03/08/its-a-best-practice-to-size-a-spark-dat agrids-columns-with-a-typicalitem/
Hope this will help you
Thanks and Best regards,
Pooja Kuber | [email protected] | www.infocepts.com

How do you print a Conductor's score

I just started working with an arrange window Symphony Orchestra pallet by Kirk Hunter and now that I have a composition I'd like to see it as a full Conductor's score. How do I get Logic to view and print this score style when it is not a preset style choice.
G5 Dual 2.7 4.5 gb Mac OS X (10.4.8) Logic 7.1.1 motu 828mkII

KC is a key command.
- before you go any further get a cup of coffee and read logics key commands windows thoroughly - esp for the score editor.
- then start assigning things that you think you understand and might be useful and experiment with them. before you know it your understanding of logic will jump around 500%. most of logics functionality is locked up in key commands which you and you alone assign!!!
- once you have midi regions inserted (apple-click in the area next to a track) then you will be able to open the score editor (windows-score editor). if you are going to be using the score editor a lot i would suggest assigning a one-stroke KC to it and a one-stroke KC for closing windows (rather than apple-W).
- the arrange page corresponds to everything you will see in the score page. you can have lots of midi regions with different score styles or quantization levels assigned). logics functionality with regards to scoring really opens up once you use each type of editor to manipulate and edit different kinds of information in different ways.
- the kirk hunter logic templates are not that great in terms of making a score that looks as it should. it is more suited for just making mockups. if you want some tips on how to make you mock-ups and score work together, i have a couple of threads on logicprohelp.com in the 'environments and templates' section which go into more detail as to how to achieve that. you can actually download an orchestral template setup to use program changes to switch articulations (not the only way of doing it!!!) but everything setup so that it will display visually correctly.

Datas are not coming from top to bottom in collumn

Hiiiii
I am moving my data from itab to itab1.
And in itab1 datas are not started from top of the collumn for each a/c no.
A/CNO|AB|DZ|RV|SA
00001|00 |000|00 |10
00001|00 |000|00 |15
00001|00 |000|020|000
00002|00 |15 |000 |00
00002|21 |00 |000 |00
00002|00 |25 |000 |00
00002|00 |00 |000 |17
what should i do to start my data from top of the collumn.
Thanks in advance.
Edited by: sanket sagar on Mar 17, 2011 8:14 AM

Hi,
Let me add some more comments in your code.
LOOP AT IT_BKPF INTO WA_BKPF.
IF SY-SUBRC = 0. - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
ENDIF.
READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
BUKRS = WA_BKPF-BUKRS
GJAHR = WA_BKPF-GJAHR.
IF WA_BSEG-SHKZG = 'H'.
WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
ENDIF.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
ENDIF.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
SORT IT_FINAL BY SAKNR BLART.
LOOP AT IT_FINAL.
IF WA_FINAL-BLART = 'AB'
MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
ENDIF.
AND SAME FOR ALL DOC TYPES.
ENDLOOP.
SORT IT_FINAL BY HKONT .
What is the structure of the internal table.
If my understanding is correct, you want to populate a table as below.
For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
HKONT1 - AB - 1000
HKONT1 - BC - 2000
HKONT3 - CD - 2000
Please correct it if your problem is something different.

Collumn Count from Database Table

Hello,
I wan't to get a Collumn Count from a Table in my Database, but I don't know how to do that.
I use a ResultSet, and if i press ctrl + spacebar in NetBeans I get a list of all kind of things I can get out of the result set but I can't find CollumnCount anywhere.
I thought I could use a try catch statement like this:
try
for(i=1; i<999; i++)
myResultSet().getString(i);
catch( Exception e )
AantalKolommen = i--;
But everytime I get an Exception over Invalid Crursor State and "i" keeps standing on 1.
Does anybody know a way to find out how to get a collumns count????

To retrieve the columns for a table use
http://java.sun.com/j2se/1.4.2/docs/api/java/sql/DatabaseMetaData.html#getColumns(java.lang.String,%20java.lang.String,%20java.lang.String,%20java.lang.String)
To get the columns for your result set use
http://java.sun.com/j2se/1.4.2/docs/api/java/sql/ResultSetMetaData.html#getColumnCount()
To get the ResultSetMetaData use
http://java.sun.com/j2se/1.4.2/docs/api/java/sql/ResultSet.html#getMetaData()

Cost center and cost element in different collumns

Dear all,
I developed a report painter where the lead collumn has cost element and cost center. When I run the report it shows at the same collumn the cost centers and in a different line the cost element totalizing the amount of each cost center. So the report shows for each cost element the cost centers posted with this cost element. The report show like below:
|-------
Cost center A | 100
Coste center B | 200
|-------
Cost element xxx - 300
The problem is: How can I make the Cost element in a separate column ? Ex:
Cost element xxx | Cost center A | 100
Cost element xxx | Cost center B | 200
Cost element xxx - 300 (In fact I don''t need the total)
I need cost element and cost centers in different collumns to allow export it for other application..
Regards

Hi
In report painter report we have only one lead column so we cannot have cost centers and cost elements in two different columns.Instead we can use the functionality of variation.Give the cost center in general data selection screen and select the variation functionality.So that cost centers are displayed on the left side of the report as hirearchy and only cost elements are only displayed in lead column.
Thanks
Sandesh

Update trigger syntax for multiple collumn update

Hi
I would like to create an update trigger that updates 3 collumns in another table.
This works for one collumn:
CREATE OR REPLACE TRIGGER DBNAME.Update_EVENT
BEFORE UPDATE
ON DBNAME.DB_EVENTS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
UPDATE DB_EVENT_LOG ELOG
SET
COMPLETION_EVENT = :NEW.COMPLETION_EVENT
     WHERE :OLD.RECORD_ID = ELOG.RECORD_ID ;
EXCEPTION
WHEN OTHERS THEN
-- log the error and re-raise
RAISE;
END ;
but this does not work for multiple collumns:
CREATE OR REPLACE TRIGGER DBNAME.Update_EVENT
BEFORE UPDATE
ON DBNAME.DB_EVENTS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
UPDATE DB_EVENT_LOG ELOG
SET
(COMPLETION_EVENT
, COMPLETION_DT_TM
, COMPLETED_BY)
=
(:NEW.COMPLETION_EVENT
, :NEW.COMPLETION_DT_TM
, :NEW.COMPLETED_BY)
     WHERE :OLD.RECORD_ID = ELOG.RECORD_ID ;
EXCEPTION
WHEN OTHERS THEN
-- log the error and re-raise
RAISE;
END ;
What am i doing wrong?

Try selecting from DUAL:
SQL> CREATE TABLE emp_test AS SELECT * FROM emp
Table created.
SQL> CREATE OR REPLACE TRIGGER emp_trg
   AFTER UPDATE
   ON emp
   FOR EACH ROW
BEGIN
   UPDATE emp_test
      SET (sal, comm) = (SELECT :NEW.sal,
                                :NEW.comm
                           FROM DUAL)
    WHERE empno = :NEW.empno;
END;
Trigger created.
SQL> UPDATE emp
   SET sal = 5000,
       comm = 5000
WHERE empno = 7369
1 row updated.
SQL> SELECT empno,
       sal,
       comm
FROM emp_test
WHERE empno = 7369
     EMPNO        SAL       COMM
      7369       5000       5000

Publisher certificate is invalid while deploying conductor 2.4.1

As seen in the attached screenshot, publisher certificate is shown invalid while deploying the conductor 2.4.1 ova. As per the install guide, the publisher certificate should be valid. What could be the reason. I tried searching internet but could not find anything useful.

This community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products. Please move your questions to Telepresence community to get the assistance from conductor experts.
-Dejan

Conductor Best Practice

Hi,
I was wondering what the best practice is for deploying TelePresence Conductor using CUCM.
Is there anyway CUCM can differentiate a video call vs audio call and what bridge preference it chooses if both conference bridges and conductor are in the same MRGL?
As it stands it looks like i need to create a MRGL containing Conductor for all my Jabber clients and video endpoints registered with CUCM and then a separate MRGL containing conference bridges for my phones.
Thanks, Simon

Yes Simon, better to separate MRGL between video and voice endpoints to save your resources.

Telepresence server / Conductor cannot go past 5 screen licenses.

I have a IX5000, ex90 and sx80 CUCM 10.5, telepresence server running in VM using the 30 cpu config. It is the latest code. I have 10 license screen on it, For some reason if I try a conference call between the EX90, to SX80 then Conference in the IX5000, the conference fails and I get a license error on the Telepresence server,
I have it set for FULL HD 1080p and content is set same. If I drop to 720p and leave content at 1080p it works. I have not been able to understand why I cannot go past 5 screens. I look at conference and it says I am using 5 screen licenses.
With the configuration I have I should have no issue connecting all three endpoints in a Full HD 1080p conference.
Any one have any ideas? Hope this all makes sense
ex80----calls ix5000- ex80 adds SX90 in and the merge fails when TS is set for 1080p

See page 84 of the admin guide at the following link:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC3-0.pdf
Field: Maximum screens.
(Available when the Service Preference has a conference bridge type of TelePresence Server and when Allow multiscreen is set to Yes)
For TIP-compliant endpoints dialing into Rendezvous conferences using the TelePresence Conductor's B2BUA, this field specifies the maximum number of screens for which resources are allocated on the conference bridge. The TelePresence Conductor takes the lesser of the Maximum screens value and the number of screens specified by the TIP endpoint and allocates resources accordingly.
For pre-configured endpoints this setting is ignored and the number of screens defined for the pre-configured endpoint are allocated.
For endpoints that are neither TIP-compliant nor pre-configured, this setting is ignored and only a single screen is allocated, unless the endpoint is:
escalated into an ad hoc conference on the TelePresence Conductor
reserved as a host in a Lecture-type conference
using the Cisco VCS's external policy server interface to call into a rendezvous conference
If the endpoint falls into one of the categories listed above, the Maximum screens defines the number of screens for which resources are initially allocated on the conference bridge.
Essentially in an adhoc escalation with 3 screens set on the template, each endpoint will reserve 3 screens worth - or roughly 4 SL per endpoint like the IX5000 is doing at 1080p + 1080p content.
This does not happen in a Rendezvous conference, with 1080p + 1080p content and 3 screens it would take up about 79% of the 10 Screen Licenses and will fit correctly with an IX5000 and two 1 screen endpoints like an SX80
-Jonathan

Drawing collumn line

Hi
can anyone let me know how to draw a collumn/vertical line in report display

hi,
check this sample example.
reward points if hlpful.
*& Report ZGM_OPENPO                                                  *
REPORT ZGM_OPENPO NO STANDARD PAGE HEADING LINE-SIZE 132 LINE-COUNT 36(2).
TABLES: t001w, "Plants/Branches
ekko, "Purchasing Document Header
ekpo, "Purchasing Document Item
marc, "Plant Data for Material
mara. "General Material Data
     DATA:
BEGIN OF itab OCCURS 0,
     matnr LIKE marc-matnr,
     werks LIKE marc-werks,
     beskz LIKE marc-beskz,
     mmsta LIKE marc-mmsta,
END OF itab.
     DATA: BEGIN OF iekpo OCCURS 0,
      ebeln LIKE ekpo-ebeln,
      menge LIKE ekpo-menge,
      aedat LIKE ekpo-aedat,
      wemng LIKE eket-wemng,
      END OF iekpo.
DATA: BEGIN OF iekko OCCURS 0,
      ebeln LIKE ekko-ebeln,
      lifnr LIKE ekko-lifnr,
      bedat LIKE ekko-bedat,
      ekgrp LIKE ekko-ekgrp,
      END OF iekko.
selection-screen:begin of block b1 with frame title text001.
SELECT-OPTIONS werks FOR ekpo-werks OBLIGATORY.
SELECT-OPTIONS matnr FOR ekpo-matnr.
SELECT-OPTIONS beskz FOR marc-beskz.
SELECT-OPTIONS bsart FOR ekko-bsart.
selection-screen:end of block b1.
INITIALIZATION.
AT SELECTION-SCREEN ON werks.              "Validate for werks
SELECT SINGLE * FROM t001w WHERE werks IN werks.
IF sy-subrc <> 0. MESSAGE e429(mo). ENDIF.
AT SELECTION-SCREEN ON matnr.
SELECT SINGLE * FROM mara WHERE matnr IN matnr.
IF sy-subrc <> 0. MESSAGE e429(mo).ENDIF.
START-OF-SELECTION.
SELECT * FROM marc INTO CORRESPONDING FIELDS OF TABLE itab   WHERE werks IN werks AND beskz IN beskz AND
                        matnr IN matnr.
SELECT ebeln FROM ekpo INTO CORRESPONDING FIELDS OF TABLE iekpo
                    FOR ALL ENTRIES IN itab WHERE matnr = itab-matnr AND loekz EQ space.
SELECT ebeln lifnr bedat ekgrp FROM ekko INTO CORRESPONDING FIELDS OF
TABLE iekko
                    FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln AND bsart IN bsart.
SELECT ebeln menge aedat FROM ekpo INTO CORRESPONDING FIELDS OF iekpo
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln. MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
SORT iekpo BY aedat.
DELETE ADJACENT DUPLICATES FROM iekpo COMPARING ebeln.
SELECT wemng FROM eket INTO CORRESPONDING FIELDS OF iekpo FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln.
MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
END-OF-SELECTION.
DATA : file_name TYPE string.
file_name = 'c:\pay_det\open_po1.xls'.
DATA : BEGIN OF it_join_fields OCCURS 0,
         field_name(20),
         END OF it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'ebeln'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'menge'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'aedat'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'wemng'.
APPEND it_join_fields.
CLEAR it_join_fields.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      filename                        = file_name
      filetype                        = 'ASC'
      APPEND                          = 'X'
      write_field_separator           = 'X'
    TABLES
      data_tab                        = iekpo
      FIELDNAMES                      = it_join_fields
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT iekpo.
IF iekpo-menge NE iekpo-wemng.
    WRITE:/4 iekpo-ebeln,21 iekpo-menge ,46 iekpo-aedat, 56 iekpo-wemng.
ENDIF.
ENDLOOP.
if sy-subrc <> 0. write / 'no data exist for this plant'. endif.
TOP-OF-PAGE.
uline 1(80).
WRITE :/ sy-vline, 20 ' OPEN purchase ORDERs report' color 5,
          80 sy-vline.
uline 1(80).
WRITE:/ sy-vline ,   4 'PURSCHASE ORDER'    COLOR COL_HEADING,
         20 sy-vline, 21 'ORDER QUANTITY'    COLOR COL_HEADING,
         45 sy-vline, 46 'item change' color col_heading, 55 sy-vline,
         56 'RECIEVED QUANTITY' COLOR COL_HEADING, 80 sy-vline.
uline 1(80).
END-OF-PAGE.
WRITE :/ 'PAGE NUMBER' ,SY-PAGNO.

Forte / Conductor not deploying the Conductor libraries tothe clients

Good day!
We have a Forte 3.0.L.2 (NT) server for development, as well as a 3.0.L.2
(Unix) server for development and one for deployment. The developers code
in the NT environment, then we export the workspace to Unix. Recently we've
added Conductor (1.0.L.1) and WebEnterprise (1.0.D.1). All was working
fine, until I renamed the environment on the Unix development environment.
Previously, when clients pulled deployments, they would receive the
Conductor-related libraries, but now (after the environment name change) the
"wfclient" library no longer comes over with the deployment, as it used to.
I've rebuilt the environment (recreated via nodemgr and rebuilt the node
templates, as well as reinstalling it all back) but this didn't take care of
the problem. Forte states we need to install the Conductor client on the
client machines. However, our other three environments will still deploy
the "wfclient" and other conductor-related libraries to the clients. Do you
have any information on this behavior?
thanks in advance,
Sean Boone

Hi,
I had the same issue but I just managed to fix it. You must upgrade and/or regenerate you proxy. This creates new classes (possibily in a new package) that you must use in your code. I had this error because the classes directory was not clean after the rebuild and the old classes (in the old package) were still present, so the compilation was successful with the old classes. So clean your classes directories, regenerate your proxy and use the new classes in your code.
Regards,
Sylvain

VCS and Conductor - Inbound external calls via IP only

Hello,
I have a client who has an Expressway Core and Edge and Conductor registered to CUCM. The issue I am facing is there are a decent amount of external video endpoints that can only dial inbound via H323 IP address. They can't dial via H323 E164 or anything in URI format. In the past the client has had a fallback alias configured to route to a rendezvous conference on Conductor, but the issue is becoming that they need more than one conference at a time for these legacy endpoints.
Has anyone run into this or found a work around?

Patrick,
I have discovered that information in this thread but I am still having an issue. For some reason my transform is not working. Look at the destination value in the call log below. Notice how it states 13. The unit is not calling just the number 13 - the unit is calling SOMEIP##13 and the VCS is stripping the IP## off before I can apply a transform rule to it. Thoughts?
Search (9)
State: Completed
Found: False
Reason: Not Found
Type: H323 (ARQ)
CallSerial Number: 0afa3aa6-667f-4251-b922-566798345103
Tag: 991adf4f-1c69-4689-9769-1b86ff5dd3c2
Source (1)
Authenticated: True
Aliases (1)
Alias (1)
Type: H323Id
Origin: Endpoint
Value: Rm 150
Alias (2)
Type: E164
Origin: Endpoint
Value: SOMEALIAS
Zone (1)
Name: Internal IP Ranges
Type: Local
Path (1)
Hop (1)
Address: xxx.xxx.xxx.xxx
Destination (1)
Alias (1)
Type: E164
Origin: Unknown
Value: 13
StartTime: 2014-11-04 14:52:54
Duration: 0.03
SubSearch (1)
Type: Transforms
Action: Not Transformed
ResultAlias (1)
Type: E164
Origin: Unknown
Value: 13
SubSearch (1)

Scheduling conference on CONDUCTOR using API

Hi,
We're trying to use the Conductor programming interface (API) in a JAVA script.
The way the Conductor is handling conference creation using "factory.conferencecreate" is very strange.
We want to create Scheduled conference , with PIN code .
Some questions :
* Where do we have to specify the template we use for this creation ?
* Does the creation of a conference mean one Alias and one (unique) Template per conference ? As the Template contains the pin code
* Sometime we managed to create a conference but it disappears five minutes later ( with no pin code for test)
* We don't use "on the fly" conference, just scheduled.
Thank in advance for your advices
Regards
Emmanuel

hi

RE: (forte-users) Conductor Distributed AccessException

Man! you need some Gas. Top it up and give it a go :)
-----Original Message-----
From: mmynatt [mailto:mmynattcomponentsartistry.com]
Sent: Wednesday, 29 March 2000 10:19 am
To: Forte-Users-Digest
Subject: (forte-users) Conductor Distributed Access Exception
Hi,
Has anyone ever seen this error message in the conductor trace window on
starting an engine:
Channel.Open() Distributed Access exception on initiator channel "Ping" from
initiator component dbserv1(db unit) to component DB router primary caused
the channel to be disconnected.
The engine will not start.
Mark Mynatt
Components Artistry, Inc.
303-688-0784
mmynattcomponentsartistry.com <mailto:mmynattcomponentsartistry.com>

Hi Jagadish,
I'm not trying to change it, it's at "Allowed" on all of my superclasses,
and I want it to be "Allowed" on the subclass too. If I remember correctly
there's some blurb in the manual somewhere that objects are smaller and/or
quicker if you turn of the subclass override thing?
Anyway, apparently, according to other replies I've received, it's just a
forte bug, and I need to recreate the service object. I'll give it a go
when I get in to work tomorrow and come back to you all if it still doesn't
work...
Thanks everyone,
Tim Sawyer
Development Consultant
PanCredit
Leeds, UK.
-----Original Message-----
From: [email protected]
To: Tim Sawyer
Cc: '[email protected]'
Sent: 17/04/01 18:39
Subject: Re: (forte-users) Distributed Property
You have the answer. A class should set "Subclass Override" to TRUE (or
ON)
if it wants any of its derived classes to override the behaviour.
If you want your subclass to be able set its Runtime properties
(Distributed, Shared, Transactional, Monitored), then turn ON "Subclass
override" in all the classes above in the hierarchy.
Jagadish
This e-mail and its attachments are for the use of the addressee only.
It may contain information that is legally privileged, confidential and
exempt from disclosure. It is not a contract, and prices, data
and other information are not warranted as to completeness or accuracy.
Any comments or statements made herein do not necessarily
reflect those of PanCredit Systems Limited. If you are not the intended
recipient you must not copy, distribute or disseminate this e-mail
or attachments to anyone other than the addressee.
If you receive this communication in error please advise us by telephone
at once.
PanCredit Systems Limited
Tel: +44 113 250 0260
Fax: +44 113 250 0621

Conductor collumn?

Similar Messages

Maybe you are looking for