Configuration Migration Tool Question
Hi
I trying to migrate a FIM configuration from one server to another.
While following the steps described in "Introduction to the Configuration Migration Tool" document I get an error in step 8.
Join-FIMConfig : Two objects with the same AnchorAttributeValue were detected. A requirement for using this migration
tool is that AnchorAttributeValue is unique within an Object Type.
AnchorAttributeNames = AppliesToCreate AppliesToEdit AppliesToView DisplayName
AnchorAttributeValues = AppliesToCreate AppliesToEdit AppliesToView DisplayName
ObjectType = ObjectVisualizationConfiguration
ObjectID 1 = urn:uuid:ecbff780-511b-45da-85fe-65cbf236d80f
ObjectID 2 = urn:uuid:8aa59dca-7759-4d32-96d2-3f21ed1239f2
At line:1 char:26
I am not ware, that I have changed anything in the portal itself at all. I only have custom Sync rules, Sets and MPRs defined.
How can I determin which those objects are that make the trouble here?
What are preferred join rules to overcome this problem?
Thanks in advance.
Henry
I'm having the exact same error, but for other attributes:
Join-FIMConfig : Two objects with the same AnchorAttributeValue were detected. A requirement for using this migration
tool is that AnchorAttributeValue is unique within an Object Type.
AnchorAttributeNames = DisplayName
AnchorAttributeValues = DisplayName
ObjectType = AttributeTypeDescription
ObjectID 1 = urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1
ObjectID 2 = urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f
Any tips on how to resolve this? These are built-in attributes, so I think I didn't cause this. When does he actually complain about duplicate values? Because there are more objects with duplicate DisplayNames...
The objects are:
<?xml version="1.0" encoding="utf-8"?>
<Results xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ExportObject>
<Source>http://fimsvc.corp.contoso.com:5725/resourcemanagementservice</Source>
<ResourceManagementObject>
<ObjectIdentifier>urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f</ObjectIdentifier>
<ObjectType>AttributeTypeDescription</ObjectType>
<IsPlaceholder>false</IsPlaceholder>
<ResourceManagementAttributes>
<ResourceManagementAttribute>
<AttributeName>ObjectID</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>CreatedTime</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>14/06/2010 17:48:45</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>DataType</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>Reference</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>Description</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>The binding's resource type</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>DisplayName</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>Resource Type</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>Multivalued</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>False</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>Name</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>BoundObjectType</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>ObjectType</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>AttributeTypeDescription</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>UsageKeyword</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>true</IsMultiValue>
<Values>
<string>Microsoft.ResourceManagement.WebServices</string>
</Values>
</ResourceManagementAttribute>
</ResourceManagementAttributes>
<LocalizedResourceManagementAttributes />
</ResourceManagementObject>
</ExportObject>
</Results>
<?xml version="1.0" encoding="utf-8"?>
<Results xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ExportObject>
<Source>http://fimsvc.corp.contoso.com:5725/resourcemanagementservice</Source>
<ResourceManagementObject>
<ObjectIdentifier>urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1</ObjectIdentifier>
<ObjectType>AttributeTypeDescription</ObjectType>
<IsPlaceholder>false</IsPlaceholder>
<ResourceManagementAttributes>
<ResourceManagementAttribute>
<AttributeName>ObjectID</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>CreatedTime</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>14/06/2010 17:48:45</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>DataType</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>String</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>Description</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>The resource type of a resource. This attribute is assigned its value when the resource is created in the FIM service database by the FIM service. It cannot be modified by any user.</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>DisplayName</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>Resource Type</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>Multivalued</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>False</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>Name</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>ObjectType</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>ObjectType</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>false</IsMultiValue>
<Value>AttributeTypeDescription</Value>
</ResourceManagementAttribute>
<ResourceManagementAttribute>
<AttributeName>UsageKeyword</AttributeName>
<HasReference>false</HasReference>
<IsMultiValue>true</IsMultiValue>
<Values>
<string>Microsoft.ResourceManagement.WebServices</string>
</Values>
</ResourceManagementAttribute>
</ResourceManagementAttributes>
<LocalizedResourceManagementAttributes />
</ResourceManagementObject>
</ExportObject>
</Results>
http://setspn.blogspot.com
Similar Messages
-
Migration Tool - using a connection with a proxy
Hi,
my connection to Internet is via a proxy. How can I configure Migration Tool to use that proxy? Is it possible?
Otherwise, the error message is: An error occured while connecting to Oracle CRM On Demand Server.
I've done a test with a direct connection (no proxy) to Internet and it works, but unfortunately I need to use a proxy.
Has anyone done this already?
Thanks,
SimonaHi Experts,
I tried adding editing the BAT file as mentioned in this thread and I think it is bypassing the proxy but fails to generate the XML file. This is the error I get. please share your ideas.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:\>cd Migration
D:\Migration>cd D:\Migration\Oracle Migration Tool OnDemand
D:\Migration\Oracle Migration Tool OnDemand>migrationtool -u XXXX\YYYY
-p *******-s _https://secure-ausomxdba.crmondemand.com ReadAll Picklist
Exception in thread "main" java.lang.NoClassDefFoundError: =D:\Migration\Oracle
Migration Tool OnDemand\odesa/logging/properties
Caused by: java.lang.ClassNotFoundException: =D:\Migration\Oracle Migration Tool
OnDemand\odesa.logging.properties
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: =D:\Migration\Oracle Migration Tool OnDemand\odes
a.logging.properties. Program will exit.
D:\Migration\Oracle Migration Tool OnDemand>
Thanks,
Shabu -
Question about Backing Up apps and using Migration tool
Since installing Leopard on my G5 PPC, I have been having a strange problem with the sleep, screen saver. Anytime the system goes into screensaver or sleep, it will not come back and will be frozen. Needless to say I was told by the Mac Genius guys that I need to do a clean install.
So my real question now is about backing up all my apps and then using the migration tool to bring them back into the new install. I was going to attempt to use Carbon Copy Cloner on a second internal drive (Time Machine has never worked for me on my Lacie 500gb.) Once I have a full bootable copy, I will do a clean install (erase and install option) on my original drive, then I guess I am going to use the migration tool.
So my questions are:
1) Does this strategy seem like it will work?
2) Is the migration tool straightforward? IE - Can I pick and choose what to put back on the new install?
3) Any pitfalls that I should be aware of?
I have already backed up my docs and data to the external, but I have so many programs with plugins installed that getting my apps back the way they are is essential to me.
Thanks.Remember Time Machine is designed to do constant, incremental backups of your HDD. If you delete something from the internal HDD of the Mac it will no longer be backed up to the external HDD and will eventually be deleted from the backup archive as time passes and TM keeps doing its backups.
What will probably be a better solution is to simply drag-n-drop the entire iTunes folder to an external HDD for backup and use that as the main iTunes library. The drawback to this is that to play the music you'll need to have the external HDD connected. Unless your plan is not to delete all the music from your MBP, just some of it. -
Problem with BizTalk 2010 Party Migration Tool
Hello All,
We are upgrading BT2006 R2 to BT2010. We are trying to use the Party Migration Tool to move our EDI partners, but are encountering the following error while we are trying to Initialize the Migration Tool:
The database or the database version is incompatible with the installed version of this product. For more details please see the event log
The Event Log shows the following:
Error Source: BizTalk Server Party Migration Tool Details:Microsoft.BizTalk.ExplorerOM.BtsException: The database or the database version is incompatible with the installed version of this product. at Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.set_ConnectionString(String
value) at Microsoft.BizTalk.Migration.PartnerManagement.UI.UpgradeHelperController.InitializeAndAutoMigrate(Nullable`1 doNotMergeIds, Nullable`1 createDefaultAS2Agreement, String sourceServer, String sourceDatabase, String migrationServer, String migrationDatabase,
Boolean overwriteMigrationDb) at Microsoft.BizTalk.Migration.PartnerManagement.UI.UpgradeHelperController.initializeWorker_DoWork(Object sender, DoWorkEventArgs workerEventArgs) at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object
argument)
Has anyone encountered this error yet? Any help would be much appreciated!
Thanks!I think this is the assembly issue. I had reported it during the beta. It looks like I did actually try it on BizTalk 2006 R2. Here is the link (it should be public now):
https://connect.microsoft.com/BizTalk/feedback/details/559323/partymigrationtool-fails-to-run-on-biztalk-2006-r2-box
The config is here:
<configuration>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Microsoft.BizTalk.Migration.PartnerManagement" culture="neutral" publicKeyToken="31bf3856ad364e35"/>
<codeBase version="3.0.1.0" href="..\MSI\Program Files\Microsoft.BizTalk.Migration.PartnerManagement.dll"/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="Microsoft.BizTalk.Edi.PartnerAgreementManager" culture="neutral" publicKeyToken="31bf3856ad364e35"/>
<codeBase version="3.0.2.0" href="..\MSI\Program Files\Microsoft.BizTalk.Edi.PartnerAgreementManager.dll"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
So you need to modify the path to match what you have - absolute paths are ok. Then try loading the tool again. I was able to get it to work this way during the beta.
Thanks,
If this answers your question, please use the "Answer" button to say so | Ben Cline -
CS6 Design Standard , clone, migration tool, trial mode (urgence)
Hi all and sorry for this question.
I clone on a external disk my MacBook Pro (OSX 10.7) with Super Dumper .
Then i have istalled OSX 10.8.2 and imported all data and applications with the migration tool during the installation.
My problem is that now my CS6 Standard Edition Suite is in trial mode.
I have a Box CS6 Design Standard licence - i have to re-insert my serial number?
Why Apple Migration Assistant not transfer also the data of licence?
It is normal or it's clone that is bugged?
Many thanks.
FAdobe applications should be installed, not migrated. I suggest the cleaner tool be used to uninstall all of it and then re-install the software properly.
Bob -
Error when using Channel Migration Tool in SAP Directory Content Migration Tool
Hi Experts,
I'm trying to migrate a file receiver channel using the Channel Migration Tool in SAP Directory Content Migration Tool.
I enter the channel name and then select it or click in "Edit"; I get the bellow error:
Thanks in advance.
Su May
500 Internal Server Error
SAP NetWeaver Application Server/Java AS
The initial exception that caused the request to fail, was:
java.lang.NullPointerException: while trying to invoke the method
com.sap.pi.tools.dirmig.channel.metadata.SoftwareComponentVersion.getVersion()
of a null object returned from
com.sap.pi.tools.dirmig.channel.metadata.AdapterMetadataFactory.getLatestSWCV(java.lang.String)
at
com.sap.tc.pi.tools.dirmig.wd.wd.comp.channelmigration.ChannelSelectionView.onActionChannelTableSelect(ChannelSelectionView.java:548)
at
com.sap.tc.pi.tools.dirmig.wd.wd.comp.channelmigration.wdp.InternalChannelSelectionView.wdInvokeEventHandler(InternalChannelSelectionView.java:486)
at
com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:75)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:159)
... 56 more
See full
exception chain for details.
Failed to process request. Please contact your system
administrator.
While processing the current request, an exception occured which could not be handled
by the application or the framework.
If the information contained on this page doesn't help you to find and correct the
cause of the problem, please contact your system administrator. To facilitate
analysis of the problem, keep a copy of this error page. Hint: Most browsers
allow to select all content, copy it and then paste it into an empty document
(e.g. email or simple text file).
For further information about the Web Dynpro error page, error
analysis and a description of well-known error situations, see SAP note
1113811.
Correction Hints
Exception
could be caused by the development component: sap.com/tc~pi~tools~dirmig~wd
Note: The above hints are only a guess. They
are automatically derived from the exception that occurred and therefore can't
be guaranteed to address the original problem in all cases.
System Environment
Client
Web Dynpro Client Type
AJAX Client
User agent
Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1;
Trident/5.0)
Client Type
msie
Client Type Profile
ie6
ActiveX
enabled
Java Applets
enabled
Accessibility mode
disabled
Inline CSS
false
Validate by rendering
true
Server
Web Dynpro Runtime
vendor: 'sap.com', name: 'tc/wd/webdynpro', scV: 'sap.com',
scN: 'WD-RUNTIME', location: 'SAP AG', counter: '7.4008.20140808120905.0000',
R: '7.40', SP: '8', PL: '0', change number: '613920', codeline:
NW731CORE_13_REL
J2EE Engine
7.40.3301.367419.20140806095041
System ID (SID)
Server Node ID
|6080050|60800|Server 00
00_60800|douaklsappod.douglas.local/10.2.0.87|SERVER|RUNNING
Java VM
SAP Java Server VM, version:6.1.071 24.55-b08, vendor: SAP AG
Operating system
Windows Server 2008 R2, version: 6.1, architecture: amd64
Application
Java EE Application (deployable object)
sap.com/tc~pi~tools~dirmig~wd
Web Dynpro Application
DirectoryCockpit
Request URI
/webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd/DirectoryCockpit
Version
vendor: 'sap.com', name: 'tc/pi/tools/dirmig/wd', scV:
'sap.com', scN: 'SOAMON', location: 'SAP AG', counter:
'7.4008.20140828111619.0000', R: '7.40', SP: '8', PL: '0', change number: '9'
Web Dynpro Code Generation Infos
sap.com/tc~pi~tools~dirmig~wd
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd:
SapDictionaryGenerationCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:01:39+0000, changelist=402811, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd:
SapDictionaryGenerationTemplates
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:02:11+0000, changelist=402811, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapGenerationFrameworkCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T19:41:09+0000, changelist=402838, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapIdeWebDynproCheckLayer
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:25:15+0000, changelist=612716, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapMetamodelCommon
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T19:44:59+0000, changelist=402897, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapMetamodelCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL, buildtime=2014-08-22T19:42:52+0000,
changelist=402897, host=vmw5876, is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapMetamodelDictionary
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T19:51:47+0000, changelist=402813, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapMetamodelWebDynpro
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:03:52+0000, changelist=612717, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapWebDynproGenerationCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:25:48+0000, changelist=612716, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd:
SapWebDynproGenerationTemplates
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:25:36+0000, changelist=612716, host=vmw5876,
is-central=true)
WD web module
webdynpro/resources/sap.com/tc~pi~tools~dirmig~wd: SapWebDynproRuntimeGen
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:22:51+0000, changelist=612719, host=vmw5876,
is-central=true)
sap.com/tc~wd~api
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapDictionaryGenerationCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:01:39+0000, changelist=402811, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapDictionaryGenerationTemplates
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:02:11+0000, changelist=402811, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapGenerationFrameworkCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL, buildtime=2014-08-22T19:41:09+0000,
changelist=402838, host=vmw5876, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapIdeWebDynproCheckLayer
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:25:15+0000, changelist=612716, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapMetamodelCommon
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T19:44:59+0000, changelist=402897, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapMetamodelCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T19:42:52+0000, changelist=402897, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapMetamodelDictionary
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T19:51:47+0000, changelist=402813, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapMetamodelWebDynpro
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:03:52+0000, changelist=612717, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapWebDynproGenerationCore
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:25:48+0000, changelist=612716, host=vmw5876,
is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapWebDynproGenerationTemplates
7.4008.20140806095041.0000 (release=NW731CORE_13_REL, buildtime=2014-08-22T20:25:36+0000,
changelist=612716, host=vmw5876, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api:
SapWebDynproRuntimeGen
7.4008.20140806095041.0000 (release=NW731CORE_13_REL,
buildtime=2014-08-22T20:22:51+0000, changelist=612719, host=vmw5876,
is-central=true)
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException:
while trying to invoke the method
com.sap.pi.tools.dirmig.channel.metadata.SoftwareComponentVersion.getVersion()
of a null object returned from
com.sap.pi.tools.dirmig.channel.metadata.AdapterMetadataFactory.getLatestSWCV(java.lang.String)
at
com.sap.tc.pi.tools.dirmig.wd.wd.comp.channelmigration.ChannelSelectionView.onActionChannelTableSelect(ChannelSelectionView.java:548)
at
com.sap.tc.pi.tools.dirmig.wd.wd.comp.channelmigration.wdp.InternalChannelSelectionView.wdInvokeEventHandler(InternalChannelSelectionView.java:486)
at
com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:75)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:159)
at
com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:94)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at
com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at
com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:515)
at
com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:58)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1671)
at
com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1485)
at
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:908)
at
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessing(ApplicationSession.java:880)
at
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:357)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:326)
at
com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at
com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:101)
at
com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at
com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at
com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at
com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at
com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at
com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at
com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at
com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)Hi,
Go to NWA>Configuration>Infrastructure>Java System Properties, Click on the Applications tab and search tc~pi~tools~dirmig~wd & Start Application as shown in below screenshot.
I am not sure but you can try this if it helps.
Regards,
Dipen. -
GRC 10 Upgrade: Migration Tool Problem
Hi All,
I am in a process to migrate the GRC 5.3 data to GRC 10.0. I have successfully installed migration tool GRCACMIG00_0.sca. I accessed this tool and found the below option on the initial page:
1. DAta Export: Export AC 5.3 Configuration and Master Data
2. Reports: Export Migration Data+Quick Links
3. Administration: Administer Data Export Processes+Quick Links
I have successfully exported the configuration data. However, when I am trying to export the transactional data, much to my surprise, I found that, the option Export AC 5.3 Transactional Data is not available under Data Export.
This link is clearly shown in the migration guide. However, I am unable to get it.
Has anyone got inot such problem? If yes, please share the solution to this problem.
Woiuld appreciate help
Regards,
FaisalHi Prashant,
We are already on higher SP level on 5.3. What else can be causing this issue.
Where can we get more information on this. Transacional data export option is NOT VISIBLE when migration URL or application is executed -
I recently downloaded the Oracle Migration Tool for migrating a
Microsoft Access database to Oracle8 for Linux. This migration
tool contains the following components:
1. Oracle Installer 3.3.0.1.3
2. Oracle Migration Assistant for Microsoft Access 8.0.4.0.0
3. Oracle Named Pipes Protocol Adapter 8.0.4.0.0
4. Oracle Net8 Client 8.0.4.0.0
5. Oracle Objects for OLE 2.2.2.2.0
6. Oracle TCP/IP Protocol Adapter 8.0.4.0.0
7. Oracle8 ODBC Driver 8.0.4.0.0
8. Required Support Files 8.0.4.0.0
I installed everything onto my Windows98 client machine. Once I
did this, I could see the following entries in my Start Menu
under "Oracle for Windows95":
1. Microsoft ODBC Administrator
2. 004002 Class Library Documentation
3. 004022 Bound Controls and Class Library
4. 004022 Control Notes
5. 004022 Release Notes
6. Oracle Home Selector
7. Oracle Installer
8. Oracle Migration Assistant for MS Access
9. Oracle Objects for OLE Documentation
10. Oracle ODBC Help File
11. Oracle ODBC README File
12. Oracle ODBC Test
When I went into the Microsoft ODBC Administrator, I could also
see that there was a new entry under the ODBC Drivers tab:
Oracle ODBC Driver 8.00.0400 Oracle Corporation SQORA32.DLL
12/3/97
So far, so good.
Then I started going through the Oracle8 ODBC help file to get
my machine set up to start using the tool. Under "Configuration
Tasks," it says the following:
Before you configure the data source, you must configure Net8
database services, so there is an entry for each Service Name.
To do this, start the Oracle Net8 Assistant, either click on the
Oracle for Windows NT program group and click on the Oracle Net8
Assistant icon or from the start bar select Programs, select
Oracle for Windows NT, and select the Oracle Net8 Assistant.
Using the Oracle Net8 Assistant, you can create an entry in the
tnsnames.ora file for each Service Name. The Oracle Net8
Assistant is installed when you install Net8.
That's when I started running into problems. Although the
installer had shown that Net8 had been installed, I could not
find any evidence of a Net8 Assistant on my Windows98 client
machine. Is there a trick to starting up the Net8 Assistant?
Until I am able to perform this step, I cannot go to the next
step of configuring my ODBC driver.
Any help would be appreciated.
- Brendan
nullBrendan,
I am not 100% sure, but I believe win98 is not supported.... yet.
I know that 95 is supported, but to be honest, I do not run
winDOZE. Maybe an upper authority from Oracle should correct me
if I am wrong.
Kevin
Brendan Conner (guest) wrote:
: I recently downloaded the Oracle Migration Tool for migrating a
: Microsoft Access database to Oracle8 for Linux. This migration
: tool contains the following components:
: 1. Oracle Installer 3.3.0.1.3
: 2. Oracle Migration Assistant for Microsoft Access 8.0.4.0.0
: 3. Oracle Named Pipes Protocol Adapter 8.0.4.0.0
: 4. Oracle Net8 Client 8.0.4.0.0
: 5. Oracle Objects for OLE 2.2.2.2.0
: 6. Oracle TCP/IP Protocol Adapter 8.0.4.0.0
: 7. Oracle8 ODBC Driver 8.0.4.0.0
: 8. Required Support Files 8.0.4.0.0
: I installed everything onto my Windows98 client machine. Once
I
: did this, I could see the following entries in my Start Menu
: under "Oracle for Windows95":
: 1. Microsoft ODBC Administrator
: 2. 004002 Class Library Documentation
: 3. 004022 Bound Controls and Class Library
: 4. 004022 Control Notes
: 5. 004022 Release Notes
: 6. Oracle Home Selector
: 7. Oracle Installer
: 8. Oracle Migration Assistant for MS Access
: 9. Oracle Objects for OLE Documentation
: 10. Oracle ODBC Help File
: 11. Oracle ODBC README File
: 12. Oracle ODBC Test
: When I went into the Microsoft ODBC Administrator, I could also
: see that there was a new entry under the ODBC Drivers tab:
: Oracle ODBC Driver 8.00.0400 Oracle Corporation SQORA32.DLL
: 12/3/97
: So far, so good.
: Then I started going through the Oracle8 ODBC help file to get
: my machine set up to start using the tool. Under
"Configuration
: Tasks," it says the following:
: Before you configure the data source, you must configure Net8
: database services, so there is an entry for each Service Name.
: To do this, start the Oracle Net8 Assistant, either click on
the
: Oracle for Windows NT program group and click on the Oracle
Net8
: Assistant icon or from the start bar select Programs, select
: Oracle for Windows NT, and select the Oracle Net8 Assistant.
: Using the Oracle Net8 Assistant, you can create an entry in the
: tnsnames.ora file for each Service Name. The Oracle Net8
: Assistant is installed when you install Net8.
: That's when I started running into problems. Although the
: installer had shown that Net8 had been installed, I could not
: find any evidence of a Net8 Assistant on my Windows98 client
: machine. Is there a trick to starting up the Net8 Assistant?
: Until I am able to perform this step, I cannot go to the next
: step of configuring my ODBC driver.
: Any help would be appreciated.
: - Brendan
null -
Getting error message " You are not authorized to access the migration tool "
One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks
Hello Raj,
It seems that this user does not have proper authorization to perform Data Migration.
You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
Steps:
1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
Let me know for any further queries.
BR
Ankur -
BO XI R1 -- BO XI R2 Migration Tool
Post Author: gray
CA Forum: Migration to XI R2
hi,
does the migration tool migrate business views ... I see mention of universes but nothing on bv's.
thanks,
grayGeoff Croxson wrote:
I guess the next question is if I can get the upgrade online from SAP.com or go through a reseller.
You can use support for problems arising from a CCM DB copy or IW migration. But not really for the planning of the migration. If you use a 3rd party or SAP consultant the major benefit is the migration completion is on them and whatever they offer you as far as completion time, etc. Migrations to new version can get complex.
However if you just want to keep what you have the CCM DB copy is part of ourt backup/restore process and should be very straight forward. You destination system would contain everything from the source with all new server hardware/software.
Lots of choices available...
Regards,
Tim -
How to run the Oracle migration tool in DOS?
Hi,
Can we use migration tool to configuration of record types from staging environment to production environment. If yes, could you please let me know how to use this tool.
Thanks in adavance.
Regards,
ManishThanks for your reply.
I have gone through the link on oracle migration and i am tried to run but due to error its not been run properly.
The error shown is as follows:
The Error which is been shown is:Error Command .Could you please help me to find so that i can run Migration tool .I have used the command
Migrationtool -u <username> -s <CRM on Demand Server> ReadAll Picklist.
appreciate your quick reply.
Thanks,
Manish -
Migration from Stellent v7.g to UCM 11g - Configuration Migration Utility
Hello,
I am in the process of planning a migration from the old Stellent 7.5 system to the new Oracle UCM 11g.
I keep hearing of a utility called "Configuration Migration Utility" to setup the 11g system with the same users, folders, metadata, etc... as the older Stellent system. Does anybody know where to find this utility? Is there a single tool that will "export" the configuration from my Stellent and import that configuration onto my 11g?
Please let me know.
Thanks!
JDMHi
CMU tool is a way to create the entire configuration bundle from 1 instance to the other .
This is a component that will be available from patchset 13526049 which is for CS 7.5
You will need to put this patchset on the 7.5 server and then from the option list select CMU which will then install the component on server .
For ucm 11g it is already installed on the server but disabled by default .
Thanks
Srinath -
Use migration tool outside of workbench
Hi,
is it possible to to use the migration tool outside of the workbench and if so, how?
It is a jar so can a class be called directly?
Regards,
JohnTom Oconnell wrote:
I haven't opened the box yet -- it's an Easter present, so I guess I need to buy a male to male usb cable.
I don't think you can via USB Mac to Mac. You can use an ethernet cable, but you need to buy an adapter for the MBA (http://store.apple.com/us/product/MC704ZM/A?mco=MTY3ODQ5OTY)
You can use the MBA USB port if you migrate from a Time Machine Backup or other disk (i.e a clone).
You can also do it wirelessly:
See page 13 ("Configure your MacBook Air with Setup Assistant")
and page 16 ("Migrating Information to Your MacBook Air")
from http://manuals.info.apple.com/enUS/MacBook_Air_13inch_Late2010UG.pdf
FWIW, I did my migration from a clone via USB without a problem.
Tony
Message was edited by: Tony T1 -
Issue with migrating 'WI' using 'TFS migration tool' when trying migrate from '2013 to 2013'
Hi ,
Our final destination is to migrate projects from TFS-2010 to TFS-2013, for testing and familiarizing with the
migration tool we trying to migrate project within the 2013 server and between two servers of 2013,
we don't have any issues with migrating source code, we done it successfully,
but when we try to migrate 'WI' within same server and also tried to between two server we are getting two
different errors respectively when tried within server and between server, unable to migrate 'WI' in any scenario, log files attached for the same. Log file 'error-1' is the errors generated while trying migrate 'wI' within the same server and 'error-2' is
the errors generated while trying migrate 'wI' between two server, Need ur guidelines to over come these issues.Hi Sham,
Based on your description, I'd like to know the version of TFS integration tools you're using and the error details when migrate work items. If you use TFS integration tools 2012, please make sure you have Team Explorer 2012 installed on your server machine.
Please also let us know the configuration you used for the migartion. If you migrate between different domains, make sure the domains have two-way trust relationship. If the issue persists, check the event logs to see if there any useful information and
elaborate more details about your scenario with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have been handed a project where the primary requirement is to
convert a Websphere/DB2 application to either Sun App server(or
JBoss)/Apache/M$ SQL Server or some other DB like mySQL.
The
first item I undertook was to get the code (jar files, ear files, etc)
and the DDL files for the database. Next, I downloaded and setup
Eclipse for J2EE development, installed Sun's App Server, downloaded
the Sun Migration Tool and followed the instructions to enable it to
work within the App Server environment. As a test, I randomly grabbed a
JAR file from the pile of code to see if it would run through the
Migration tool. Of course, it threw an exception... but, I'm at a loss
as to what I need to do to move forward from this point. If anyone has
any idea of how to do a migration from Websphere to Sun App Server or
JBoss, I sure would appreciate some pointers... The exception:
Code:
Exception in thread {color:red}"AWT-EventQueue-0"{color} java.util.MissingResourceException: Can{color:navy}'t{color}
find resource {color:navy}*for*{color} bundle java.util.PropertyResourceBundle, key ASMTGUI.ErrorMsg
FileDoesnotExists
at java.util.ResourceBundle.getObject(ResourceBundle.java:384)
at java.util.ResourceBundle.getString(ResourceBundle.java:344)
at sun.iasmt.util.ASMTResourceBundle.getValue(Unknown Source)
at sun.iasmt.util.ASMTResourceBundle.getValue(Unknown Source)
at sun.iasmt.user.gui.GuiMain.validateSrcInputArgs(Unknown Source)
at sun.iasmt.user.gui.GuiMain.actionPerformed(Unknown Source)
at sun.iasmt.user.gui.ActionPanel.processActionEvent(Unknown Source)
at sun.iasmt.user.gui.ActionPanel$4.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6041)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5806)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4413)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4243)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
at java.awt.Container.dispatchEventImpl(Container.java:2102)
at java.awt.Window.dispatchEventImpl(Window.java:2440)
at java.awt.Component.dispatchEvent(Component.java:4243)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121) Thanks,
Da Liz** bump ** still having this issue... and am pulling hairs out (losing more than gaining these days...) trying to figure out why the migration tool starts out fine then craps.
I decided to uninstall everything and create a whole new install of the latest j2EE JDK (since my original install had stuff inside of c:\Program Files\Java - and I wanted to eliminate tricky issues with having a space in the path). So, after uninstall and deleting all Java, I went through the registry on my dev machine and did a search for "c:\Program Files\Java" and replaced them all with "c:\java" - the new location for java stuff to be installed - then reinstalled everything anew.
then I tried migrating an ear that was a web app...
C:\>%asmt_home%\bin\asmigrate -c -S ws50 -T glassfish -t c:\temp\gfout c:\temp\cbc_20080717\source\cbci_app_v2\cbci_app.ear
JAVA_HOME=C:\Java\SDK\jdk\
ASMT_HOME=c:\Java\SDK\asmt
J2EE_HOME=C:\Java\SDK\
Extracting archives :-
Extracting: cbci_app.ear
xxx
Extracting: cbci_app.war
xxxxxx
Clean up...
Selected Directory is not empty. Some Output file(s) may be overwritten. Do you
want to continue? (Y/N):y
Pre-processing input :-
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||||||||||||||||||||||
Migration Status :-
Exception in thread "main" java.lang.NoSuchMethodError: javax.xml.bind.annotation.XmlAccessorType.value()Ljavax/xml/bind/annotation/AccessType;
at com.sun.xml.bind.v2.model.impl.ClassInfoImpl.getAccessType(ClassInfoImpl.java:244)
at com.sun.xml.bind.v2.model.impl.ClassInfoImpl.getProperties(ClassInfoImpl.java:195)
at com.sun.xml.bind.v2.model.impl.RuntimeClassInfoImpl.getProperties(RuntimeClassInfoImpl.java:79)
at com.sun.xml.bind.v2.model.impl.ModelBuilder.getClassInfo(ModelBuilder.java:112)
at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.getClassInfo(RuntimeModelBuilder.java:45)
at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.getClassInfo(RuntimeModelBuilder.java:37)
at com.sun.xml.bind.v2.model.impl.ModelBuilder.getTypeInfo(ModelBuilder.java:141)
at com.sun.xml.bind.v2.model.impl.RegistryInfoImpl.<init>(RegistryInfoImpl.java:50)
at com.sun.xml.bind.v2.model.impl.ModelBuilder.addRegistry(ModelBuilder.java:183)
at com.sun.xml.bind.v2.model.impl.ModelBuilder.getTypeInfo(ModelBuilder.java:152)
at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(JAXBContextImpl.java:306)
at com.sun.xml.bind.v2.runtime.JAXBContextImpl.<init>(JAXBContextImpl.java:179)
at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:70)
at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:50)
at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.xml.bind.ContextFinder.newInstance(ContextFinder.java:133)
at javax.xml.bind.ContextFinder.find(ContextFinder.java:286)
at javax.xml.bind.JAXBContext.newInstance(JAXBContext.java:372)
at javax.xml.bind.JAXBContext.newInstance(JAXBContext.java:337)
at javax.xml.bind.JAXBContext.newInstance(JAXBContext.java:244)
at sun.iasmt.util.ASMTJaxbContext.<init>(Unknown Source)
at sun.iasmt.convertors.common.xmlconvertor.AppReader.read(Unknown Source)
at sun.iasmt.control.SJSMTXmlFileHandler.readXMLFile(Unknown Source)
at sun.iasmt.control.ASMTController.startupEngineAndConvert(Unknown Source)
at sun.iasmt.control.ASMTController.startupEngineAndConvert(Unknown Source)
at sun.iasmt.user.cmd.CommandCallController.<init>(Unknown Source)
at sun.iasmt.user.IASMTMain.runTool(Unknown Source)
at sun.iasmt.user.IASMTMain.<init>(Unknown Source)
at sun.iasmt.user.IASMTMain.main(Unknown Source)
C:\> Looks slightly different, but in general, I am still getting the same old stuff as in the previous posting... Maybe the strange syntax in the first line of the exception is the clue "javax.xml.bind.annotation.XmlAccessorType.value()Ljavax/xml/bind/annotation/AccessType;" but I can't find this in my code and am wondering if anyone has ever seen anything like this before? Also, I'm noting that all references in the exception path to any sun.iasmt.* classes are "Unknown Source"... perhaps another clue to something not defined or configured somewhere; but what and where? I just don't know where to look...
BTW - the code I am working on converting is from a Websphere 5.1 runtime environment and I have no access to the server that the files were exported from.
Da Lizard
Maybe you are looking for
-
How to write a unicode text in pdf file
Dear Friends, I am a beginner in acrobat pdf plug-in development. I was trying to write a unicode text (Tamil text) into pdf file. Using same api I am able to write english text in time-roman, areal etc fonts. But I am not able to write tamil texts.
-
Hi All, What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server? Client Type Port range and Protocol required for Audio Port range and Protocol required for Video Port
-
Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read fi
-
What are the tools in performance Tunning in ABAP/4 Thanks Regards, Kumar
-
Change of Gl account centrally
Description change for Korea I am trying to change the Korean Translation for Account xxxxxxxx but SAP will not allow me to change for Korea. Do you know of a way I can change? Thank you, I appreciate any help you can provide