Configuration - New G/L

Hi people,
Could you tell pass by pass about the configuration New G/L?
Or give me the best link where there are that?
Thanks a lot,
Rosana.

Hi
Refer the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/830e405c538f5ce10000000a155106/frameset.htm
It will give you a general idea on how New GL is configured
Regards
Sanil Bhandari

Similar Messages

Error while configure new plant

Dear Friends,
I have configured new plant - 8888 in company - 1000, and while creating a sale order for that plant, i am getting the below mentioned error msg, guide me to solve this....
" No add. company data maint. for 1000 8888 - please maintain J_1IMOCOMP ".
Thanks & Regards
T.Arulvanan.

Hi,
Please chech whether you have assogned the plant to the distribution chain(i.e. the sales org+ dist.channel). Only then the plant becomes a delivering plant and allows you to create sales orders.
Regards,
Raghav

How we can configure new pricing procedure at the time of billing document

Hi SD Gurus,
Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
Thanks & Regards,
Sreenivas.P

Hello,
Why?
The sales order confirms the price given to the customer. If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
Regards
Waza

How to configure new account assignment group of material

dear expert
how to configure new account assignmnet group of material
vicky

how to configure new account assignmnet group of material
Probably, the question should have been how to create Account Assignment Group for a material.
Go to IMG SD => Basic Functions => Account Assignment/Costing => Revenue Account Determination => Check Master Data Relevant for Account Asignment.
There select Materials : Account Assignment Groups and create as per the requirement and save. Now you can see the same while creating the material master.
thanks
G. Lakshmipathi

Configure new Volume unit

Dear all, pls suggest me how to configure new volume unit in Material master Basic data !...

Hi,
You can create your own Unit of measure in t.code: CUNI & then enter in material master during creation of material in MM01.
More check link:
http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
Regards,
Biju K

Configuring News Portlet

Hi
I have my Oracle 9ias Rel 2 with Infrastructure running on a Windows 2000 Server. i am trying to configure News Portlet(Downloaded from OTN), i already have my JPDK and Url services infrastructure installed on the machine.
Have made the entries in jserv.properties and Zone.properties as reffered in the README Doc available with this portlet's ZIP file , now the problem is, unlike other Portlets this doc doesnt tell me how to test the sample(using an url), instead the DOC has some HTTP link under the heading 'Moreover.com news feed links '
Can any one help me as to how to Register this provider, in that case what URL should i specify?
is there any way of testing any Sample for the news Portlet?
TIA
Bijesh

The registration process is simarly to any Web provider as shown below.
1. On the Build tab of the Portal Design-Time Pages root page, click on Register a Portlet Provider within the portlet called Provider.
2. Enter Provider information for the Sample.
1. Name: NewsPortlet
2. Display Name: News Portlet Portlet Samples
3. Timeout: 300
4. Timeout Message: News portlet Timed Out
5. Implementation Style: Web
6. URL:
1. http://myhost.com:port/servlet/newsportlet (if you're using Oracle9iAS Portal 3.0.9)
2. http://myhost.com:port/jpdk/providers/newsportlet (if you're using Oracle9iAS Portal 9.0.2)
7. Login Frequency: Never
3. Click Finish.

How to configure new ATA/EIDE internal drive

Hi,
I run a 1Ghz Dual Processor MDD PowerMac G4 w/ OS X 10.4.3, and originally, a single 80 Gb hard drive.
For years I have been selectively burning disks, and utilizing an external 80 Gb firewire drive to keep my internal from overflowing. Finally I have exceeded my capacity to keep everything backed up this way, and have purchased a new Western Digital Caviar WD1200JB internal.
Seemed like a good drive at a good price. The reality is I knew nothing about what I was doing.
I had the misperception that additional hard drive space worked just like additional memory. Plug and play, right? I have since learned, not so.
This brings me to my question...
How do I configure my machine properly? My aspiration is still the same as my anticipation. I want to maintain my existing 80 Gb hard drive as the start up, and use the 120 Gb as overflow, and perhaps partition a small portion of it seperately for back up of critical files. Is this possible?
I currently have the jumper set for "slave" configuration. But this has produced no different results than when I first installed the new drive with the jumper in factory default position "cable select". In both cases both disks are seperate desktop icons, and each are seperately bootable. If this is the best I can achieve, I guess that's fine. It doesn't seem any better or different than my set up with the original external. Can't I set it up so I can maintain my current home folders, but not necessarily have all the folders/files within it strictly confined to the same hard disk?
Any help from anyone on this confusing (for me) matter will be greatly appreciated.
Thanks so much!, and Best of the Year to ya!

AFAIK, you can't spread a Home folder across volumes. You can, however, move your Home folder to another volume. I do not have the explicit instructions on how to accomplish this, but it does involve some Terminal commands and changing some entries in NetInfo Manager. Perhaps another user can chime in with instructions for moving your Home folder.
You can spread your home directory across multiple volumes if you need to. This can be accomplished by creating symbolic links for subdirectories underneath the root of your home directory.
For example, if you wanted to store your music folder on a different volume, but still have it appear as if it was physically located in your home directory, you would move it and create a symbolic link in its place. This requires using the command line, but it is not difficult.
Say you moved your Music folder to the root of the new disk, named "New Disk". The full path (in Terminal) to the new music folder would be "/Volumes/New Disk/Music" (quotes needed due to the space in the name). Since you moved the Music folder, it no longer exists in your home directory. Simply open up the Terminal application and create a symbolic link that points to the new location like so:cd ~
ln -s "/Volumes/New Disk/Music" MusicIn this example, the first command changes you into your home directory (the '~' is shorthand for it) and the second command creates the symlink. You need to hit enter after each command.
Hopefully this isn't too confusing, but you can accomplish what you desire without too much difficulty.
Cheers!
MDD Dual 1.25 G4 | 2GB RAM | Mac OS X (10.4.3) | Logic Pro 7.1.1 | AMT8 | Delta 44 | SoundDiver 3.1 PB2

Configure New TM on a New Macbook pro with retina display Issue

I have bought a new New Macbook pro with retina display laptop (Lion moutain OS)and a new TM (2TB).
I have an internet router with wireless connect.
I plugged TM to the router with an ethernet cable.
Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
then I choose Time capsule from WiFi as shown below:
Then the airport utility (version 6.1) opened and start configuring TM but it gives an expected error when it is starting to join the TM!!!!
I have reset the TM several time but with no hope.
PS: I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
I am struggling on this issue for weeks and I cannot yous TM on my macbook pro.
Help please.

Time Capsule .. TC is the hardware box you bought.. Time Machine is the software you use in the Mac computer.. so what you generally refer to as TM is really TC.. !!
I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
That is great.. you do not need to setup the Time Capsule at all then. It is already setup.. forget using 6.1 utility.. it is useless toy version.
Just use it.. open Time Machine and see if you can connect to the TC drive to do backup.. and to the wireless.
From your statements..
Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
You are trying to connect with both wireless and ethernet at once.. This can mess things up. choose wireless or ethernet.. not both.
If you keep running into issues.. reset the TC.. I know yet again.
Set it up using SMB names.. for both the TC itself and wireless.
Then lock the wireless channel for 2.4ghz.. use channel 1, 6, or 11 (13 in europe) and see how it goes.

Configured new language not displayed in user profile Language options

Hi all,
I have a requirement to add new language in portal. In that I have configured the language u201Chindiu201D in portal content translation.Now i want to configure language options in userprofile.
These are the procedures I have followed
1 .On the file server navigate to
<Installation-drive>:usrsap<SID><Instance_ID>SDM
ootoriginsap.com com.sap.security.core.adminSAP AG<version_number>com.sap.security.core.admin.630.ear
From here extract the com.sap.security.core.useradmin.war.
2.In com.sap.security.core.useradmin.war file and add u201C hi = Hindi u201C in Language_en.properties
3.Create a copy of Language_en.properties, and save as Language_hi.properties at any location.
Now we have to do some changes with the help of configtool.bat
So start the tool by executing.
<SAPJ2EEEngine_installation>j2eeconfigtoolconfigtool.bat>
Now Switch to configure mode.
In the Tree navigate to cluster_data>>persistant>>com.sap.security.core.ume.services.
Now switch between view and edit mode and choose yes.
4.By right clicking on com.security.core.ume.service create a Sub node. And choose
File-entry and upload the language_hi.properties that you have created in previous step.
5.Create and Close the Window. And just restart all cluster nodes
                        After the above configuration, the language u201Chindiu201D is added and I can able to see the language in self registration Language options.but it is not displayed in userprofile language options.
                        how to configure this Please help me.
                    These are the threads I have referred
                      How to add Hindi language in Portal
                      Regards: Add a new language (Hindi} In portal
                      How to add new language in portal
Regards
Bala

Dear Markus,
1.) import done in SMLT
2.) support package parts of the languages imported
3.) language substituted
4.) client refill done
I have done 1 & 2 and also client maintenance.
I'm not sure what are 3 & 4. Can elaborate further ?
Thanks.
Regards,
Kent

How to configure new system landscape in portal server for bsp iview

Hi
can you tell me what are the necessary parameters (apart form default parameters that were there while creating new system landscape) for configuring a system landscape for using it in bsp iviews.
thanks & regards
Ashutosh

Hello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien.

Configure new exchange 2010 while old exchange 2003 running ?

Hello,
I'm in the process of deploying a new fresh installation of SBS 2011/Exchange 2010 server. Currently
I have SBS2003/Exchange 2003 running. I want to retired the server and replace with the new server. No migration. By doing that, I am setting up the new server SBS2011 name/domain/ip everything the same as the old server and will replace once all the configuration
is completed.
1. Since they both using the same domainname/ip, can I setup the new server Exchange 2011 while the old
server is alive? If yes, how's the process?
2. If I export and import users email in .pst (on user outlook client) and when the new server is put in place alive does it will regenerate the database
in new Exchange 2011?
Thanks in advance =)

For the 1st question, both servers are in different/isolated network. So you were saying yes i can do that correct? will not going to have any issue running both servers having all the same configuration while configuring the new server up?
the 2nd. since i am not migrating, i am planing to export/import user email from outlook client and when i replace the old server with the new server, i setup the user email client and import the .pst back.

UWL Configuration - New Task

Dear all.
I need your help.
I need to customize new workflow task that need to be displayed and executable at UWL level.
When I go to System Administrator area, there are many "System Alias" that have connector type "webflow connector".
How to know which system alias is valid/ in active?
And also when I have a look configuration name under "click to administrate item type and view definition there are more than one configuration mane.
How to know which configuration name that I need to modify?
Many thanks

Hi Sandy,
So you want specific dynamic behaviour on the nature or kind of task.
Thats interesting.
What my knowledge suggests is that you can do the following:
1) Download UWL's xml file.
2)Create a new item type i.e for these special WF tasks.
3)Add the Add Memo action to this item type
4)Make a subview for these item types.
Read the [UWL configuration pdf |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45]before doing this.
I hope it helps.
Regards,
Sumit
Edited by: Sumit Oberoi on Feb 26, 2008 12:55 PM

CCMS - issue configuring new IDoc monitor template

Hi,
we wan´t to create a new CCMS IDoc monitortemplate in our central ALE configuration system and define all relevant remote SAP System and transport the complete template to the Solution Manager System.
We wan´t to customize the template in the ALE configuration System, "not" in SolMan.
These are the steps i´ve already done.
1. create new MTE´s by transaction BDMONIC2
2. customize the new MTE´s by tr. BDMONIC
3. create a new Template in RZ20
4. create a new Monitor for the new TEMPLATE in RZ20
5. after some minutes (the new created MTE´s are available for configuration)
First question. Why i have to wait some minutes to see the new MTE´s in the new monitor ?
anyway,
the monitortemplate for my own system(template creation system) is working fine.
6. Now i´ve created new entries to monitor remote SAP Systems in RZ21
7. I can see the new SAP Systems in my new TEMPLATE in RZ20
8. I would like to use my created MTE´s for every SAP System. Transport all MTE´s and configuration to the relevant SAP Systems.
9. I can see all entries in BDMONIC2 and BDMONIC in the remote System ...
... but I can´t see the new MTE´s in RZ20 in the remote System and
I can´t see the the new MTE´s (for the remote system) in my new TEMPLATE in the ALE configuration System (where the remote system is assigned).
note: I saw that a new MTE creates a new alert class in RZ21.
This class is filled in the template creation system(ALE configuration) but not in the remote system.
Any ideas what is going wrong here ?
thx,
Gordon
Edited by: Gordon Breuer on Jul 30, 2009 2:28 PM

Hi,
check this links:
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/df1241c738f423e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/forums
Regards,
Spandan

Configure new datasource,certain terms

Hi all,
while configuring a new data source, i am confused by certain terms, would appreciate if anyone can shed some light.
Under the connection pool settings:
Maximum Capacity: 20
According to BEA online help, its the "The maximum number of physical connections that this connection pool can contain". What if 25 users are accessing the application to access the database?
Capacity Increment: 2
According to BEA online help , its the "The number of connections created when new connections are added to the connection pool. When there are no more available physical connections to satisfy connection requests, WebLogic Server creates this number of additional physical connections and adds them to the connection pool." Does it mean if my maximum is 20, and there are 25 people using the database, weblogic will create 2+2+2 to connections to meet 25 connections?
Shrink Frequency:900 seconds
When shrinking occurs, WL will shrink it to what number? 20( which is my maximum capacity?

What version of weblogic are you using?
If WLS has 25 execute threads, then no matter
how many users are talking to WLS, it will only
really be processing 25 of these users at a
given instant, and with typical JDBC applications,
the connection from a pool is obtained, used and
returned, all within the thread's processing of
the current request, so no mattr how many users
are talking to WLS, it really only needs 25 connections
in the pool. Add 1 extra for safety.
Never alter Capacity Increment. It is of no help,
and might cause problems.
Shrinking will remove currently unused connections,
down to the initial capacity of the pool, or to the
recently observed average needed capacity,
whichever is larger. Unless you have a pressing
need to close DBMS connections, I recommend
against shrinking. It wastes time when load comes
back, to remake connecitons it could have kept.
Joe Wienstein

How to install or configure new odbc driver in ODI

Hi
I want to configure filemaker 11 in odi to do this i have an filemaker odbc driver. Will it be possible to configure this odbc file as new technology in ODI?
If possible please let me know the procedure to do it.
Thanks in advance
Regards
Sandeep

Hi Hussein,
Thanks for your valuable reply
Now i have followed the 2 documents which 1 i need to follow ..
1. Installing Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.2 (Doc ID: 1517172.1)
2. http://docs.oracle.com/cd/E18727_01/doc.121/e37993.pdf
I Need the output like GUI method for the products..
i am new to oracle endeca i dnot know how to proceed the installation and configurations
while downloading the software from edelivery it shows list of software for endeca which 1 need to download for the installations
https://edelivery.oracle.com/EPD/Search/handle_go
Kindly suggest me
i am waiting for your valuable reply

Configuration - New G/L

Similar Messages

Maybe you are looking for