Configuration variable for ODAC ODP

I am getting .DataAccess.Client.OracleException: ORA-00942: table or view does not exist error after querying the model created for my existing oracle DB.
Generated query has dbo.tablename. If I delete the dbo the query works fine without error. To remove dbo we are suppose to switch off schema name generation ie IgnoreSchemaName = true. To do this we are suppose to use the EF provider config variable. Let me know how to use for the ODAC ODP.
example :
var config=Devart.Data.Oracle.Entity.Configuration.OracleEntityProviderConfig.Instance;
config.Workarounds.IgnoreSchemaName = true;
similarly i want for System.Data.OracleClient or Oracle.DataAccess.Client.

Similar Messages

Configuration variables for a REST cfc

I am creating my first RESTful cfc which will allow a legacy system to interact with a more current system. There are some "configuration" variables that need to be available to a couple of functions in the cfc. These variables are mainly for disk paths and an API key. What is the best practice for setting these variables in my RESTful cfc? Should I just declare them at the beginning of the component outside the functions in the variables scope? Do I need an init function? If I use an init function how does it get called when the other functions are only called via REST?

I think you can declare them in the beginning of the component prior to any functions. You can include an init function, and just call it the same as you would call any other function.
<cffunction name="init">
<cfreturn this />
</cffunction>
<cfset tmp = path.to.component.init()>
I haven't worked with that, myself, but I've seen lots of code do that.
HTH,
^_^

Need advice on storing configuration variables for use by FP2000 Controller for embedded application.

I am creating 8 machines that generally operate in the same way and each will be controlled using a FP-2000 controller. The only difference between the machines is a set of scaling constants and pass values for determining if the machine completed its process successfully.
In the past, using an idependent PC and Labview, I have created a configuration.vi for writing the constants and configuration variables to a data file on my hard drive. Then in the auto.vi I read(only once each time the program is started) the file and store the data in the program. I would like to do something similar with this system but am not familar with the Field Point system.
I know i
t is probably not difficult to store the data to the host computer and transfer it to the modules but I am better off writing to the modules once and storing the data onboard the FP controller for use by an embedded application. This way, if the network connection is lost for any reason, the machine can still operate. Is this possible, and if not what do you suggest in order to prevent being so reliant on the host computer?
Thank you for your help.

Mike,
There are a number of ways to accomplish what you desire. The easiest is to continue doing what you are already doing. The FP-20xx series modules treat their flash memory as if it was a hard drive, so the file I/O VI's in LabVIEW work just the same in a FP-20xx as on a regular computer running LabVIEW. The primary variation will be in how you write the files over the network. Since mapping network drives is more of a Windows functionality, you can not simply have a VI running on your host computer use a File I/O VI to write to a FP-20xx. Instead, what you will need to do is to write the file to you local drive and then FTP (file transfer protocol) the VI to the FP-20xx module. This can be done using the LabVIEW Internet toolkit or any 3rd party FTP util
ity. One word of advice; the OS on the FP-20xx does not support long filenames but due to a problem in the FTP server, long filenames (non 8.3 compliant) may be uploaded and once there, you will be unable to access the file again, even to delete it.
An alternative method that I have seen used is to use a global VI and write to it from the host machine through the use of VI server. You can then have the program on-board the FP-20xx save the globals to your configuration file.
Regards,
Aaron

Configuration variable for menu changes avoiding server restart

Hi,
After editing/hiding a menu item (in coremenuitems()), is there a configuration variable that helps to immediately reflect the same thereby avoiding server restart.
Thanks in advance
Ramesh
Edited by: 845556 on 30 Aug, 2012 1:45 AM
Edited by: 845556 on 30 Aug, 2012 1:50 AM

Hi Atheek,
There is no way to do this without restarting the Server...
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Configuring variables for bsp_protcl :// bsp_server /

Hello all,
We have copied our BW and SRM production systems back to our support environment (BW1 and EB1).
There is a BW web reporting role that is on both the BW1 and EB1 system however when I execute a report from the role on the EB1 system it tries to open up a web report on the BW production system.
When I execute the same report on the BW1 system it correctly opens a web report on the BW1 system.
In the role, I have noticed in the details for the BW web reports that the URL starts:
<bsp_protcl>://<bsp_server>/sap/bw/BEx?.....
Please can anyone tell me where to set the variables for <bsp_protcl> and <bsp_server> so that I can point them to the correct BW system?
Many thanks,
John.

Hi John,
Maybe you can refer to this OSS Note 853997. You need to import a support package. Hope this helps.
Cheers,
Mona

Accessing dynamic configuration variables for correlation in BPM

Hi,
we are not able to access the runtime variables/ context objects while using correlation in BPM.
is this the a problem with SP levels.. My server is in PI SP 9
What might be the problem..??
Regards,
Rajesh

Hi,
Where you are not able to see the context objects???
In ID----Receiver det or in BPM???
Regards
Seshagiri

Container variable for softw component/version in alert configuration

Hi Experts,
I am unable to find the container variable for SWC/SWCV in the sap help..
do we have anythign for this?
I have used all the other variables like msg ID, sender/rcvr interface etc.
Pls share ur thoughts
Regards,
Teja

I am unable to find the container variable for SWC/SWCV in the sap help..
do we have anythign for this?
you dont get a variable for SWCV....if your alert is related to a process X and if process X is related only to SWCV_A then you can hardcode the same into your alert Long/ short text which you define in the alert category.

Acces dynamic configuration variable (e.g. filename) in ABAP mapping class

Hi experts
I am searching for a possibility to acces a dynamic configuration variable (DCV) in an ABAP mapping class. Since I could not find a solution in SDN and other sources, I hope somebody in this forum can help me.
What I already found is the following code which can be used to set a DCV, but what I would be interested in is how to read a DCV.
Any help is appreciated.
Markus
METHOD if_mapping~execute.
DATA l_record type mpp_dynamic.
* copy payload
result = source.
* add an adapter specific attribute
l_record-namespace = 'http://sap.com/xi/XI/System/File'.
l_record-name = 'FileName'.
l_record-value = 'test.xml'.
dynamic_configuration->add_record( l_record ).
ENDMETHOD.

Hi Markus,
you can find everything in my blogs
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
Regards,
michal

Configure SSO for ITS to R/3 using SNC/Kerberos

Our R/3 systems had been configured for SSO using SNC and Kerberos for awhile now. We now have a requirement to configure SSO between ITS and R/3. Since our R/3 env. has been using kerberos library, we won't be able to use SAP Cryptographic library. I had modified the registry, environment and services in itsadmin to point to the kerberos library and principal names for agate and r/3 servers as described in SNC User Guide; also, I updated table SNCSYSACL with the Agate SNC name. That seems to work fine. From the trace file, it recognized GSS-API library for Kerberos and the SNC name for Agate. However, when I tried to logon to R/3 from ITS, I still am being prompted with the logon screen to enter my SAP account/password.
I found several whitepapers and documentations stating that ITS does support Kerberos for SSO but I couldn't find any procedure on how to implement it. Following is the error I'm getting from the sapbasis.trc file but I can't find any document on this error:
=====================================================
[Thr 5284] SncInit(): Initializing Secure Network Communication (SNC)
[Thr 5284]       PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
[Thr 5284] SncInit(): Trying environment variable SNC_LIB as a
      gssapi library name: "C:\WINNT\system32\gsskrb5.dll".
[Thr 5284]   File "C:\WINNT\system32\gsskrb5.dll" dynamically loaded as GSS-API v2 library.
[Thr 5284]   The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
[Thr 2888] Sun Jan 15 22:44:59 2006
[Thr 2888] <<- ERROR: SncSetParam()==SNCERR_PARAM_DENIED
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
[Thr 2888] Sun Jan 15 22:45:29 2006
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
=====================================================
Does anyone know what am I missing? Any help is greatly appreciated.
Thank you!
Diem

Hi Markus,
I also just installed/configured PAS for LDAP authentication using the "PAS for External Authentication Mechanisms" documentation. I think the domain problem probably due to not having the external authentication mechanism install (in this case - PAS). Does that sound right to you?
I tried both options for ~extid_type parameter = "LD" and "UN". I added the DN information to table USREXTID when ~extid_type="LD" but both options gave me error of "LDAP authentication failed". I increased the trace level for sapextaut.trc but I don't see enough detail information. Following are the errors/data from the trace file. Can you please let me know how I can tell what string is being passed for authentication?
I'm quite sure the LDAP host and port data is correct since we've been using the same information for the SAP LDAP connector and we've been using our LDAP connector between MS AD and R/3 for a long time without any problem.
To logon to R/3 through ITS, I entered the AD account (CN attribute in AD) when I got the errors.
Thank you very much for all your help.
Diem Tran
Trace:
=====================================================
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 437]: W sapextauth: PAS session begins...
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 456]:     sapextauth: SncNameR3 is:    "p:na1adm/[email protected]"
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 462]:     sapextauth: SncNameAGate is: "p:[email protected]"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 468]:     sapextauth: SNC_LIB is:      "C:\WINNT\system32\gsskrb5.dll"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 568]:     sapextauth: XGatConnectSession leaving....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 616]:     sapextauth: XGatHandleLogin called....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 976]:     sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 993]: W Either ~login or ~password missing, returning XGDKRCloginrequired.
2006-01-18T01:39:50.281 p001688 t4992 s00000000 [sapextauth, 398]:     sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 616]:     sapextauth: XGatHandleLogin called....
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 976]:     sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1059]:     sapextauth: LDAP port ist 389
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
2006-01-18T01:39:59.140 p001688 t4992 s00000000 [sapextauth, 398]:     sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 616]:     sapextauth: XGatHandleLogin called....
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 976]:     sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1059]:     sapextauth: LDAP port ist 389
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
=======================================================

What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).

Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.

How to set boot variable for standby Sup2 in 6500?

I'm upgrading a 6500 with dual Sup2. Have copied the new boot image and system image to both bootflash and slavebootflash. Have also set new boot statements for the active Sup.
However couldn't set the boot variables for the standby Sup. Do I need to? Will the boot statements in the startup config take care both Sup's?
Thanks
Gary

If you do a wr mem, it should synchronize. You can verify using sh bootvar. Here is outputs from my lab
Router#sh bootvar
BOOT variable = sup-bootflash:c6sup22-jsv-mz.121-26.E3,1
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Standby is up
Standby has 227328K/34816K bytes of memory.
Standby BOOT variable = sup-bootflash:c6sup22-jsv-mz.121-26.E3,1
Standby CONFIG_FILE variable =
Standby BOOTLDR variable =
Standby Configuration register is 0x2102

How can I use a variable for an interface log and error fle

I want to use a variable for the interface's log and error file so that when I migrate from Dev to QA to Prod I don't have to do a lot of editing.
Specifically on the "flow" tab for the "target", I want a variable to be the first part of the path for the log (\\sundev1\fnd1-hypd1) and join this with the rest (\update\log\logfile.log) within the LOG_FILE_NAME field.
Thank you!

Hi,
It is quite simple....
just use the <%=odiRef.getSchemaName("D")%> before the file name and configure both path in the topology linked to each context.

How to set enviroment variables for Inso Filter

Hi everyone,
I want to convert word documents to html using CTX_DOC.Filter.According to the documentation,I know I neednot set the 'Inso Filter'in the preference when creating index,but I must set enviroment variables for Inso Filter.
I found the following instructions for it in the 8.1.5 documentation,but I can't understand it well.Is there anyone can tell me how to set enviroments variables for Inso Filter on Windows2000 Server?(My DB version is 8.1.7EE)
Environment Variable Locations
All environment variables related to Inso filtering must made visible to interMedia Text. Set these variables in the following locations:
listener.ora file. This makes the environment variables visible to the extproc PL/SQL process.
The operating system shell from where ctxsrv server is started. This makes the environment variables visible to the ctxsrv process, which does background DML.
Any suggestions are apreciated
Reemon
null

NSAPI plugins are normally configured using parameters specified in magnus.conf and/or obj.conf. What plugin requires you set an environment variable?

Error : configuration variable problem

Hi,
i try to develop first mobile application with flash builder 4.5 , then the see one error "
configuration variable 'compiler.library-path' value contains unknown token 'FLEX_SDKS" ,
any one have idea about fix this error
Thanks in advance,
achiever

Hi Padma.
U have to install IGS server to execute business graphics.
"Gaphics rendering problem"
This will arise when the graphics system is not initialised in ur application.
For this u have to give igsURL property.
Tht is server address where igs is installed..
for example "http://System07:41080"
and also refer this link..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/717cae90-0201-0010-a5a4-bbc6713f3779
Hope this will helpful for u..
GS

Single XML configuration file for all the SSIS packages(including parent and child packages)

Hi
I have some 16 ssis packages. source Db and destination Db for these packages are common. I am calling these child packages in a master package.
I want to use only one XML config file for this master.
How do i use same for all child packages?
and can i do it with parent package variable?

I created a master package with a variable master, and in value i have entered the configuration file path.
Hi vjp dinu,
You should create variables in the parent package to pass values to variables in each child package rather than pass the file path of the XML Configurations file of the parent package.
As Visakh mentioned, you can achieve your goal by creating corresponding variables in the parent package for each child package, and enable Package Configurations for the parent package so that you can control the values through the XML Configurations file
for the variables of the parent package.
Supposing there is a variable FilePath in child package 1, a variable ServerName in child package 2, then, we need to create two variables pFilePath, pServerName in the parent package. After configuring the Parent package variable in each child package (e.g.
mapping pFilePath to FilePath, pServerName to ServerName), you can enable XML Configurations for the parent package, and expose the value property for both pFilePath and pServerName variables. In this way, you can modify the XML Configurations file of the
parent package and the specified values will passed to the child packages.
Reference:
http://microsoft-ssis.blogspot.com/2011/06/passing-variables-from-parent-package.html
Regards,
Mike Yin
TechNet Community Support

Configuration variable for ODAC ODP

Similar Messages

Maybe you are looking for