Configure FTPS sender and reciver communication channel.
Good Morning,
I am reading blog for my FTPS for secure connection:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
Please tell me the concept of client and server certificates
server certificate --- how and where to deploy
client certificate -- how and where to deploy
how will FTPS -- XI --FTPS Scenario will work then
Regards
Hi,
Please refer the recent discussion here I have provided the couple of links for step by step process as well as the detail explanation about it'
FTPS setup confusion .
Thanks
Swarup
Similar Messages
-
Need to use only one sender and receiver communication channel.
Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 ---> E://dir1/File1
F://dir2/file2 ----> G://dir2/file2
H://dir3/file3-----> I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit RameshHi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki -
AS2 Reciver Communication Channel error
Hi,
I am doing FILE to AS2 ...
I configured the Scenatio with Synchronous MDN , I have Created the Sender for MDN report too..
beow is my Error At AS2 reciver Communication Channel...
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
ThanksHi Tom,
This problem comes in SAP PI 7.1 version for resolving you require creation of extra configuration objects u2013
1. A sender AS2 communication channel with protocol as u201Ereports‟
2. A sender agreement using above communication channel.
For more information please refer Article (This will help you in configuring extra objects)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Vikrant -
FTPS Sender and FTPS Receiver adapter. Pls help
Hi All,
I need to make file to file scenario with secure connection
I am using FTP Sender and Receiver Adapter with Connectivity
as FTPS.
Please let me know the steps I need to do for this
1. Integration Directory
2. If I need to generate certificates what steps I need to do:
a. How to generate certificates
b. Where to install these certificates like File Servers, XI
Server etc.
3. How to use these certificates in File Server, Integration
Directory etc.
Please send me a document to do all steps.
In advance thanks and Full Points will be awarded.
RegardsHi,
Deploy SAP Java Cryptographic Toolkit.&
Add the CA certificate to the key storage as below.
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
This means that you need to import the CA hierarchy of your FTPs server certificate into the list of trusted CA's in XI ( either on J2EE side in the keystore service or in ABAP side via transaction STRUST , depending on where your client is ).
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection".The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
SAP Note 821267
Refer below link
SAP Network Blog: SFTP vs. FTPS in SAP PI
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400580c1-8d16-2a10-3eb3-ec1026dae0d5 -
Sender JMS Synchronous communication channel not picking up files from JMS
Hello,
One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
if anyone is haivng any solution for this, please reply back.
Thanks in advance.Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
simple solution create new communication channel with same details and try to use the same. -
How does one use bluetooth to send and recive on t...
sending and reciving via bluetooth using nokia lumia 610
frustrating, I know, considering that every Symbian and maemo/meego device Nokia has sold years previous did this.
as mentioned. no go on the lumia's by OS default. -
How can i fix mms to send and recive pictures
How can i fix mms to send and recive pictures?
What do you mean "fix" MMS? If you mean enable it: Settings>Messages>SMS/MMS>MMS Messaging = ON
Cheers,
GB -
Sender RFC and JDBC communication channels required to be activated
Hello Guys,
Whenever we have a Oracle restart after the server is shut down for maintainence . The sender JDBC communication channel does not poll and we have to activate the channel again in the Integration Directory to make it work, is there any way to make it work automatically.
Similar is tha case with the sender RFC communication channel.
Allthough the component monitoring shows green button for the JDBC, RFC communication channel.
In case of the JMS channel (sender) the channels are in red.
Thanks for your help.HI
There is no automatic ways to restart channel that you have to manually start.
You need to stop the channels first before getting oracle server down for maintenance. This will save from errors. Maximum what you can do is to start stop channel using a program externally but that require development.
Start/Stop using RWB
Starting / Stopping of Communication Channel from RWB
Start/Stop without using RWB
Control Communication Channels Externally without using RWB
Thanks
Gaurav -
Stop and Start Communication Channels
Hi All,
I am finding some peculiar entries in my application log which has made my scenario go awry.
I have an AS2 to Proxy scenario. I am receiving the AS2 message successfully and i have to send a synchronous signed MDN back to the sender. I have done the necessary configurations for this and all certificates are loaded and verified.
The strange part is, once i receive the AS2 message and convert it to XML using content conversion, the communication channel is stopped and again restarted. This messages i could find in application log Log entries. This makes the MDN Asynchronous as the existing HTTPS connection with AS2 sender is lost and so the MDN is not delivered as ASYNC MDN method is not set up.
I need to know what are the system processes that can start and stop a communication channel. I am sure i have not set up any availability time planning for these comm channels and also, they are scheduled manually!
Thanks,
Rashmi.Hi Debashish,
I am using Advantco AS2 Adapter, and they say it is one of the system processes and not anything with their AS2 Adapter.
Thats why this question. Are there any system processes that can start/stop a communication channel? Atleast I have not come across anything like that.
Thanks for your reply,
Rashmi. -
Dynamic Configuration for two file adapters communication channels
Hello Experts!!!!!!
In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
AmolThanks for your prompt responses!!!!!
Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol -
Sender Soap Adapter communication channel error
Dear Experts,
When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
"Processing Errors in the Last 50 Minutes"
Thanx in advanceAamir,
My other interface is working fine by giving the following url:
http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
I am not using the propsed url.
Moreover when i try to give this url in the browser . It is asking of user id and password.
I am giving user as : PIAPPLUSER.It gives message servelet is ok.
In my communication channel monitoring the corresponsing communication channel:
RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
Error meesage in Webclient:
java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a -
Open and close communication channel in one link
Hello,
I implement with successful the scenario that described in this blog:
Control Communication Channels Externally without using RWB
Right now I use with this link to start the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=start
And with this link to stop the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=stop
I looking for the way to start and stop the communication channel in one link.
Eladhi elan
i think you need to write an abap program and schedule it..
abap program will call this HTTP link as The URL has no dependency on where it is called.
regards
kummari -
Report to get interfaces and corresponding communication channel details
Hello Friends,
I would like to develop a report, which can give me the details of interfaces in an XI environment, and their corresponding communication channel details like Server, Directory....
I know that IR and ID reside in Java stack. Here my question will be
Will the Java stack parameters reside in SAP Data base tables?
If yes, then any idea, which tables they reside in?
As we have multiple XI environments, Client wants to develop this type of report so that when ever he runs this report he will get the latest information.
Thanks in advance...
Best Regards
SekharSome of this information is held in transaction SXI_Cache.
Try starting with SSRVCHANNEL. -
SLD, Business System and Missing Communication Channel
Interesting issue here....
I created a business system, assigned the logical system, ...etc..etc
Imported the swcomp into ID.........completed the scenario..
Now in Communication channel monitoring i dont see the communication channel that i created for the System, i can see it on XI under sxi_cache...........under the business system, I dont see it in communication channel monitoring.
VenkatHi,
>>...i dont see it..thats what i meant...no messages for that adaptor,
Clear the Meta Data IDX1 and check the port as Ravi Mentioned IDX2.
After clearing the Meta data try to manually load the Meta data and test it.
Regards
Agasthuri Doss -
IMPOSSIBLE SENDING AND RECIVING MMS
Hello; since one month ago, i can't neither send nor recive any mms, on my iphone 3g, fw 3.13; i've tyed to restore fw, change sim card, restore the setting... no way.
could you help me?
marco italyso you've restored as new and are on 3.1.3 s.w, carrier is 5.6, you reset network settings, and had new sim? gotta be an att issue... call them and push for tech support. tell them to remove and re-add the feature and check provisioning and send the over the air signals to the device... one of those things should work
Maybe you are looking for
-
Transfer videos from IPhone 3GS to a Mac
I cannot figure how to transfer videos taken on my IPhone to my Mac. Anyone?
-
hi , below query taking lot of time,can anybody help me tune the query.My db version is oracle 9.2 explain plan for select MRH_MRN,DECODE(MRH_SEX,'M','MALE','FEMALE') AS SEX, trim((mrh_sur_name||' '||mrh_first_name||' '||mrh_middle_name)) as MEMNAME
-
RH9 topics do not show in design view
Hi, I am currently putting up a documentation project for my customer, but I have an issue with created topics. My structure is as follows: welcome topic map subtopics map subtopics map subtopics map
-
Widgets won't sit on desktop...
When first opening Dashboard I was able to mount widgets on the desktop. Now they "fly off" when I activate the desktop. What have I done???
-
JAXB marshalling complexType elements
Does anyone know why JAXB always marshalls complexType elements with a seperate start and end tag, even if the element has no content? i.e. Given the schema element declaration: <xs:element name="foo" type="fooType"/> <xs:complexType name="fooType">