Configure ports for SSAS on sql 2012

I Have 3 SSAS instances on a machine
1) Multi - Dimensional (Default instance)
2) tabular (Namedinstance)
3) powerpivot (Namedinstance)
can anyone please help me what ports need to be opened for each instance , how to configure those ports on sql 2012

That depends on the ports used by the SSAS instances; see
Configure the Windows Firewall to Allow Analysis Services Access
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

CDC for Oracle in SQL 2012 not writing updates

Hello...
I have set up a CDC for Oracle Service and Instance for use with SQL 2012. After the instance was started, I inserted six rows of data into my Oracle table and a few minutes later, it looks like the changes were picked up by the service.
The instance status page contains the following information:
Status = Green Checkmark
Detailed Status = PROCESSING
Last Transaction Timestamp = 7/22/2014 12:11:56 PM
Last Change Timestamp = 7/22/2014 11:58:35 AM
Transaction Log Head Change Number = 0x0A2C1C...
Transaction Log Tail Change Number = 0x0A2C1C... (not the same value as the head)
Current Change Number = 0x0A2C1C...
Active Transactions = 1
Staged Transactions = 0
Completed Transactions = 0
Written Changes = 0
Read Changes = 6
It looks like the six rows have been read, but they are not being written to cdc.CDC_TEST_TABLE_CT on my SQL 2012 database.
I exported the diagnostic data using the "Collect Diagnostics" link, but there are no errors in the log. Is there a primer for how to read the results of the diagnostics?
I had the following error earlier today:
"ORACDC517E:Oracle Call Intreface (OCI) method failed: ORA-01291: missing logfile
ORA-06512: at "SYS.DBMS_LOGMNR"
But that error was resolved when my Oracle account was granted DBA and "execute_catalog_role" permissions.
The account being used for the CDC Service and Instance has dbo rights on the SQL Server.
Does anyone have an idea what the problem could be?
Any help would be greatly appreciated.
Thanks!

Arthur, thank you for responding. I appreciate it! :)
I followed the instructions from Rakesh Parida's video on Technet. Below are the individual steps I followed for creating the CDC Service and Instance.
CDC Service Setup:
I made sure that supplemental logging was enabled on my Oracle server. I also made sure that my Windows account had DBA and "execute_catalog_role" permissions on the Oracle database.
From the CDC Service Config MMC I ran Action>Prepare SQL Server which created the MSXDBCDC database.
I then ran Action>New Service and entered the following information:
Service name: OracleCDCService1
Service Account: "This Account" radio button with my Windows username and password information
Associated SQL Server: <My SQL 2012 Server>
Authentication: Windows authentication
I also provided a CDC Service master password.
CDC Instance Setup:
Connected to <My SQL 2012 Server> using the CDC Designer MMC
Went through the steps of creating the Oracle CDC Instance
Oracle CDC Instance Name = CDC_TEST_SOURCE
Connected to my Oracle DB using Windows authentication
Selected a single table that I wanted to try CDC on and left CDC Gating Role blank
Ran the Oracle Logging script that enables table logging and supplemental log groups on the Oracle DB
Ran the Status Check step and all passed
Finished the wizard and started the instance
A few minutes after the instance was started I added six records to the table in Oracle.
Please let me know if you need more info.
Thanks!

Service pack1 and CU3 apply on ssas in sql 2012 ?

Hi All,
I want apply service pack 1with CU3 on particularly SSAS on my server why bcoz on we already applied on database engine after few day we installed the SSAS on my server so now i want to update the SSAS on this server ...is it possible ?
when i am trying to apply the service pack on SQL server 2012 SSAS .. i get error message like :There are no error SQL Server instances or shared features that can be updated on this computer in SQL server2012
Please help on this
Thanks,
Seetu
RAM

Hello,
In your case, you first need to install SQL Server 2012 Service Pack 1. It is Cumulative Update 3 for Service Pack 1 of SQL 2012. You can refer to the following link to download it. After that, try to install CU3.
http://www.microsoft.com/en-in/download/details.aspx?id=35575
There is an article about SQL Server Versions, you can refer to it.
http://social.technet.microsoft.com/wiki/contents/articles/783.sql-server-versions.aspx
If the issue is persist, please elaborate the issue for further investigation.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

What does "Scale out deployment (Web Farms)" mean for SP2013 and SQL 2012 SSRS?

Dear community,
in the
Feature List of Reporting Services 2012, it's written that "Scale out deployment (Web farms)" is not possible for SQL 2012 Standard edition. However, does this relate as well to SSRS in SP-integrated mode, or only to native mode?
In other words: is it possible to deploy SSRS using SQL 2012 STANDARD on more than one server in a SP2013 farm?
And just to be sure: am I right to assume that in both cases, you can create multiple SSRS Svc Applications (be they all running on the same server) and assign them to different web applications (through their proxy groups)?
Cheers,
C

Hi CHinz,
According to your description, you want to configure scale-out deployment for SQL Server Reporting Services 2012 standard edition. Right?
As you can see in the msdn liabrary, for SQL Server 2012, scale-out deployment is only supported in Enterprise and Business Intelligence editions. This is related to both native mode and sharepoint integrated mode.
It's not supported to deploy a SSRS 2012 standard edition instance on more than one server.
Since scale-out deployment is for different report server instance to share one report server database. You can use different web applications to access the same report in different report server instances.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Upgrading Sql 2008r2 (Hosting Ssrs For Scom) To Sql 2012 Failed On "uses custom security/authentication extensions/..."

Hi,
my question is: what custom extensions does SCOM uses for the SSRS?
When I look on the SSRS forum I'm advised to check who made these extensions and what use they have.
Help would be appreciated.
Greetings,
Pim

Hi,
From your description, my understanding is that you have a question when you upgrade SQL 2008 R2 to SQL 2012.
Since this is an issue about SQL server. I suggest you contact SQL server support engineer for more assistance and resource. For your convenience:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error openin configuration of Master Data Serice SQL 2012

Hi,
after installation of Master Data Services (SQL 2012 EE) I can't open Configuration Manager because of error:
"An unexpected error occured: Could not find file 'C:\Windows\assembly\GAC_MSIL\Microsoft.MasterDataServices.Configuration\11.0.0.0__89845dcd8080cc91\Microsoft.MasterDataServices.Configuration.InstallState'.."
already tried to run repair but no sucess
how repair that ?

Hi MariuszBu,
Have you got any error/warning information during install Master Data Services in your environment. Based on the error message, it seems that the Master Data Services didn't install successfully.
Please try to reinstall Master Data Services to see if this helps.
Uninstall and Remove Master Data Services:
http://technet.microsoft.com/en-us/library/ff487065.aspx
Install Master Data Services:
http://technet.microsoft.com/en-us/library/ee633752(v=sql.110).aspx
Regards,
Elvis Long
TechNet Community Support

Configuring port for J2EE

Hi all,
Could any one help me in configuring j2ee port for PI 7.0 as i am not able to connect to sxmb_ifr and to when i run the transaction scsmi i find no port number for http port .
Thanx in Advance

Hi,
Please check if you have maintained the SLD Connection Parameters , if not please do as follows:
Maintaining SLD Connection Parameters
1. Log on to the SAP System and call transaction
SLDAPICUST.
The screen Maintain SLD Access Data is displayed.
2. Choose Display<-> Change, and then proceed as follows:
a. Choose Insert Row.
b. Enter the connection parameters to the SLD:
− Host Name: host name of the SLD host
− Port: HTTP port of the J2EE engine (The following naming convention applies: 5<J2EE_instance_number>00. 50000, for example, if your J2EE instance is 00).
− User
− Password.
c. Set your entry as Primary.Only the Primary marked entry is active.
d. Save.
*Pls: Reward points if helpful*
Regards,
Jyoti

How do I configure ports for PCI-1200 using LabWindows/CVI?

I want to use 2 ports of the PCI-1200 DIO ports as oup ports. Whenever I write to a port using WriteToDigitalPort, the other port will be reset.
Shoud I congigure the ports at the beginning of the program? If so How do I do it?
(LabWindows 5.5)

I would suggest using the lower level NI-DAQ functions instead of the Easy I/O functions. (You have a lot more flexablity this way.) To configure seperate ports use the function DIG_Prt_Config, then instead of using WriteToDigitalPort, use DIG_OutPort. Here is an example that writes to one port using these NI-DAQ functions. All you need to do to write to two ports is add two lines in; another DIG_Prt_Config and another DIG_Out_Port.
Good luck and let me know if this does not work for you.
Brian
Attachments:
DOOnePort.zip ‏4 KB

I will be working on a project to migrate from Sybase ASE (15.7) to SQL Server 2014 using Oracle golden gate........I am trying to find documentation which can guide me to use a separate box installation of OGG and how to configure it for Sybase and SQL s

Hi,
I need guide to install OGG on a separate box which will help me to migrate Sybase to SQL server.
Viral Dave

hi - just an fyi
we have SQL Server 2012 and from my reads and understanding OGG supports SQL Server up to 2008. not to say it wouldn't work on higher versions if installed. in the link above check out the SQL Server installation chapter. before purchasing the license I would contact Oracle.
maybe someone here has installed it on a higher version and got it to work. we are currently working on setting up OGG to work on Oracle to Oracle servers.

What is the best practice exam for 70-462 SQL 2012 DB Admin. exam?

Hi All,
I've completed the 70-462 exam prep guide from Microsoft press, i.e., I've read the book twice and practiced everything I could on my lab network (short of AlwaysOn and Clustering), including all the review questions and practice sections. Now I need
a practice exam and I'm wondering what success test-takers would suggest.
I saw Transcender's practice exam for 70-461 and it was less than what I expected. There were questions that didn't belong there and I don't want to waste my money on a practice exam that has a bunch of "filler" questions. It was the
first Transcender practice exam I've ever seen.
Thanks for any advice you can provide! I expect to take the exam in about 3 weeks.
Eric B.

Seriously, though, I've been studying this guide for nearly 6 months, don't have the money to re-test over and over, and would rather pay for a practice test than pay for the exam itself more than once.
Hi Eric,
In addition to Kalman’s post, based on my research, you can take a practice test for 70-462 from below link. Also, as is suggested in this
article, you can buy a practice test for Exam 70-462 from Kaplan SelfTest and MeasureUp.
http://www.accelerated-ideas.com/free-70462-practice-test.aspx#.VGRCzf6KCM8
Besides, about such issues, for quick and accurate response, I would like to recommend that you ask the question in the Learning forums at
https://social.technet.microsoft.com/Forums/en-US/home?forum=CertGeneral . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang

How to do High Avilability Group Configuration steps without SAN or ISCSI storage in sql 2012

Hi I want to know how to configure HAG Always on in sql 2012 that uses
WSFC on windows 2008 R2 without ISCSI storage???
srm_2010

Hi I want to know how to configure HAG Always on in sql 2012 that uses
WSFC on windows 2008 R2 without ISCSI storage???
srm_2010
Please give a try to these URLs:
Step-By-Step: Creating a SQL Server 2012 AlwaysOn Availability Group
http://blogs.technet.com/b/canitpro/archive/2013/08/20/step-by-step-creating-a-sql-server-2012-alwayson-availability-group.aspx
How to deploy SQL Server AlwaysOn in a failover cluster without shared storage to achieve high availability SQL
http://www.techrepublic.com/blog/the-enterprise-cloud/sql-server-2012-alwayson-high-availability-database-for-cloud-data-centers/
AlwaysOn Architecture
http://msdn.microsoft.com/en-us/library/jj191711.aspx
In general it's a good idea to ask SQL Server HA and DR questions here:
SQL Server HA and DR
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqldisasterrecovery
Good luck :)
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

BIDS or SQL data Tools for SQL 2012 SP1 database

I want to start customising reports from my Win 7 workstations. The SCCM server is SQL 2012 SP1
Do I need to install SQL Server Data Tools onto the workstation or can you still use BIDS (Visual Studio) from SQL 2008 media
Also I have saved some custom report .RDL files from previous assignments. Can I convert these to point to this site's database for use in SQL 2012 ?
Ian Burnell, London (UK)

Thanks Garth - so if I install 2008 BIDS on my W7 workstation then I will be able to connect to the CM2012/SQL 2012 database?
Yes you will be able to do that. I do it all the time for SQL 2005 or 2008 to SQL 2012 and SQL 2014. :-)
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Point Imaged/Cloned Sharepoint 2010 to different/renamed SQL 2012 server - what needs to be changed/edited?

Newbie here... I am using our development VM's one has SP 2010 installed/working and configured and the other is SQL 2012 housing the DB's for the working SP sites and a third running IIS and hosting the pages. I want to use clones to copy to additional
VM's, rename the SQL and rename the SP 2010 (the IIS will stay the same just add the cloned site to it. MY question is "Is there an automated way of reconfiguring SP 2010 to point to the new SQL server? (I've already figured out how to change the SID
information and run the queries on the SQL, just need info on the SP 2010 part.)
Thanks,
Jon P.

You can't do this, don't try it. For VM purposes, SharePoint does not support:
Time Sync
Snapshotting/Checkpoints
VM Backups (e.g. SAN-based or VMDK/VHD-based backups)
You will cause problems doing what you're attempting to do, unless you isolate these VMs onto a new network that has no access to the production network -- in this case, you would also need a copy of one Domain Controller from production, as well.
Best bet is to build a new farm and restore content to it via content database/service application database restoration.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SQL Server 2012 - 3 SQL clustered instances - one default/ two named instances - how assign/should assign static ports for named instances

We have two physical servers hosting 3 SQL 2012 clustered instances, one default instance and two named instances.
The default instance is using port 1433 and the two named instances are using dynamic port assignment.
There is discussion about assigning static port numbers to the two named clustered SQL instances.
What is considered best-practice? For clustered named instances to have dynamic or static ports?
Are there any pitfalls to assigning a static port to a named instance that is a cluster?
Any help is greatly appreciated

Hi RobinMCBC,
In SQL server the default instance has a listener which listens on the fixed port which is TCP port 1433. And for the named instance the port on which the SQL server listens is random and is dynamically selected when the named instance of the SQL server
starts.
For Standalone instance of the SQL server we can change the dynamic port of the named instance to the static port by using SQL server configuration manager as other post, however, in case of the cluster, when we change the port no. of the named instance
to the static port using the method described above, the port no. again changes back to the dynamic port after you restart the services. I recommend you changing the Dynamic port of the SQL Server to static port
on all the nodes , disabling and enabling the checkpointing to the quorum.
For more information, you can review the following article about how to change the dynamic port of the SQL Server named instance to an static port in a SQL Server 2005 cluster.
http://blogs.msdn.com/b/sqlserverfaq/archive/2008/06/02/how-to-change-the-dynamic-port-of-the-sql-server-named-instance-to-an-static-port-in-a-sql-server-2005-cluster.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Providing configuration file for SQL 2012 Express installation which installing HPC 2012 R2

Hi guys,
I need to know if there is any way to provide configuration file for SQL 2012 Express installation which installing HPC 2012 R2?
I am scripting installation on HPC 2012 R2 with default SQL 2012 Express edition but I am not able to find any option to provide a configuation file for SQL 2012 Express installaiton.
Thanks,
Vivs.

Hi Vivs,
As my understanding, you want to generate a configuration file and install SQL Server 2012 express edition using that configuration file.
If that is the case, firstly, you could generate the configuration file following the steps below since express edition is run in AutoAdvance mode which skips "Ready to Install" page.
1.Double-click SQL Server installation file in your local drive, you will see that the file will be extracted to a temporary folder. Please make a note of what directory it is extracted to. For example, it could be in c:\ followed by a folder name which
will be a set of random letters and numbers "gy7h8hjhhj67rfs7".
2.Cancel installation. Then click on the Start button on the task bar, click run, type the command cmd.exe, and go to that directory via cmd.
3.Execute the following command: setup.exe /ACTION=INSTALL /UIMODE=Normal
4.Follow the wizard through to the 'Ready to Install' page. The path to the configuration file is specified in the 'Ready to Install' page in the configuration file path section.
5.Cancel the setup without actually completing the installation, to generate the INI file.
Secondly, to install SQL Server using Command Prompt, go to the SQL Server installation media root (the temporary folder) from the command prompt and specify the ConfigurationFile.ini as a parameter as shown below.
Setup.exe /ConfigurationFile=ConfigurationFile.INI
For more information about the process, please refer to the article:
http://www.mssqltips.com/sqlservertip/2511/standardize-sql-server-installations-with-configuration-files/
Regards,
Michelle Li

Configure ports for SSAS on sql 2012

Similar Messages

Maybe you are looking for