Configure virtual path mapping for forms 11.1.2

Hi
How to configure virtual path mapping for "Oracle Fusion Middleware Forms and reports 11gR2 (11.1.2.0.0)" on my client?
Configuration type = development.
In forms 10g I configure it in "orion-web.xml".
C:\oracle\ids\j2ee\DevSuite\application-deployments\forms\formsweb\orion-web.xml
Regards
Tobias

If you use the development mode install in 11.1.2 I think you cannot use the "forms.conf" approach because you don't have an OHS installed.
We've used the approach described in the following metalink document (solution no. 1) which works with deployment as well as development installations. Tested on 11.1.1.4 and 11.1.2.
How to Create Virtual Mappings in Forms 11g [ID 1063043.1]
(essentially you extend the WebLogic deployment plan for the formsapp to include the additional mappings and then redeploy the formsapp in WebLogic)
Regards
Andreas
Edited by: Andreas Leidner on Dec 7, 2011 1:45 PM

Similar Messages

Configuring virtual path in Forms6i

Hello Friends,
I have the following instruction in forms6iconfig file
[ACTION] Please configure the following virtual path with your web listener : /dev60temp for physical directory c:\Forms\tools\web60\temp
How can I configure a virtual path in Forms6i manually after installation.
thanks

Virtual paths are configured in the Apache settings file httpd.conf.

Key mapping for forms on web

Presently we are using forms 4.5. We have got costomise key
mapping for operating through forms. Now we want to start forms
on web (Intranet). Earlier we use to change key mapping through
oracle*terminal. I require help in knowing how to customise key
mapping in forms 6i / oracle 8.1.7.

Hi,
Boy, I have some good news to you: Oracle*Terminal is no longer
needed.
WordPad (or your favorite text editor) is your tool from now on.
Keyboard files are located in $ORACLE_HOME\FORMS60.
Simply ignore the binary file fmrusw.res when you run Forms on
the Web. FMRWEB.RES is the one that is used, and it's pure ASCII.
There are some comments in the file itself.
The keys are the same as the Motif version of Forms.
If you prefer the Windows keys, simply use FMRPCWEB.RES instead.
How? Check under $ORACLE_HOME\FORMS60\SERVER for your
formsweb.cfg, go to User Parameters and replace the
otherparams=
line with
otherparams=term=%forms60%\fmrpcweb.res
Now, anyone can define the Function-0 till Function-9 key
combinations, in order to use KEY-F0 till KEY-F9 triggers.
Hope this helps,
Pedro das Neves
[email protected]

Configure SAP LDAP mapping for MS-ASD

Hello,
I 'm configuring an LDAP connector from my MS-AD to my SAP-4.7 ABAP system so the user account from the MS environment gets synchronized with my SAP system.
I have configured the connection and created some mapping already but I have still some questions about the settings:
1. With the report I'm able to synchronize an MS_AD account with my SAP environment. For the first test I only add one account name so all other existing accounts are not changed. When the MS-AD account not exists on SAP the account is created like the mapping. I have also the option in this report to delete the user account from the SAP system when the account doesn't exist any more in the MD-AD. How could I prevent that some special user accounts on the SAP system are note deleted even when they are not available in the MS-AD?
2. With the mapping function MAP_SPLIT_CHAR a variable by a certain character into two ore more SAP fields like telephone number and telephone extension. Is it possible to split the content of a variable by a fixed amount of characters?
For example the user location is written like ABC.XZZ
ABC is the building number and X is the floor number and ZZ is the chamber.
3. With the mapping function MAP_conc_CHAR I'm able to combine to MS-AD fields into one SAP filed. Is it possible to combine a constant value with a field from MS-AD?
4. I'm able to insert multiple parameters or user roles by using the function MAP_CONSTANT. I add one attribute and the constant values as parameters. For a couple of parameters I have to insert a MS-AD field. How could I combine inserting constant parameters with some MS-AD fileds
Example
The Parameters CAC and BUK are fixed to the company code. But the parameter PER must be set to the employee number. This value I get from the MS-AD .
5. For the Employee mapping to SAP-HR I have also to configure the Stucture and fields. Does any one have an overview of structure names and field names from the employee structure? It couldn't be asked with the F4 option which could be user with the user mapping.
Manny thanks in advanced for the answers.
Kind regards,
Richard Meijn

Hi,
1.
create a user group for the special users and another user group for "real" users. Restrict the synchronization report to the second user group.
2.
You can write your own mapping functions. You will need a developer key in your system and some ABAP knowledge. Create your functions with SE80 or SE37. It is easy to create a function
3.
The same: create your own mapping function.
4.
It might be possible to fill the different parameters from different AD values depending on the parameter name. Use the ABAP statement "CASE". But there is no such function. You have to write it by yourself.
But think about what you really want to do. Do you want to invent an Identity Management? There are already a lot of tools. The SAP answer "SAP Netweaver Identity Management" was already mentioned.
Regards
Rainer

NAT configuration and Port Mapping for xBox

I'm looking for help with port mapping to open up the NAT for an xBox One. I'm working with the following network devices:
xBox One
DSL Modem: Embarq (ZyXEL) 660R series
Airport Extreme version 7.7.3
I understand the following from researching the issue:
The default settings for both devices block the ports needed for xBox Live.
Airport Extremes are not on the compatible list for xBox.
Port Mapping is better then creating a DMZ for the xBox.
The xBox needs its own manually set IP address.
I switched my Network>Router Mode from Off (Bridge Mode) to DHCP and NAT. I then created a DHCP Reservation and the Port Settings for that IP.
After doing this, the Airport would restart and display a warning - Double NAT. I figured this was because the 660 settings showed the NAT Mode to be SUA Only. The Edit Details link displayed an empty table where you edited the SUA/NAT Server Set. I switched from NAT Mode>SUA Only to None. So there was my Double NAT and I would have thought that would have removed one.
I also disabled the Firewall and Enabled the UPnP.
After restarts the Airport continued to display the Double NAT error. However, with the 660's NAT Mode set to None, the Internet was not there. Web browsers and email accounts replied with server not found.
Only with the 660 set to SUA Only and the Airport in Bridge Mode is the Internet accessible. I now have the details for the SUA filled out for the xBox's IP address and ports.
Hypothesis
Since both devices are acting as DHCP servers the port mapping is not working. Rather then have the 660 distribute IP addresses and then having the Airport distribute another range of numbers, I need to have both devices bridge and distribute one range of numbers. Currently the 660 is using the 192.168 range and the Airport is using the 10.0 range.
Am I correct? Any thoughts and suggestions are welcome.

Port forwarding through a double NAT.. is near impossible.. !!
And the xbox is so attuned to using UPNP it is very hard not to.. even port mapping is not a great fix. Since apple decided gamers did not count as users for Airports.. I think honestly it is best to bypass the airport and stick to upnp from the modem router.
What method of authentication does your ISP use? Because it is really better to use one router.
And in fact the router should be the Zyxel. If you plug the Xbox to the Zyxel running in full router mode, with the airport removed from the network does it work and open NAT??
If not replace the Zyxel with a modern listed router that is xbox compatible and bridge the airport to it.

Key Mapping for Forms

Hi All,
I have 100+ forms, I want to disable some keys in them. e.g. Key-Menu, key-duprec. I can not put a trigger with trigger text 'null;' in each form or inherit an object group and generate again. Can I do something global to remove these key mappings?
Regards
Mona

Mona,
just an idea: maybe you can create your own keyboard file (.res -file) and assign 'harmless' values to
Key-menu and key-duprec. Then use the term= tag when you call a form, eg:
form=<yourform> term=<yourterm-file>
kind regards,
Ivan
>Hi All,
I have 100+ forms, I want to disable some keys in them. e.g. Key-Menu, key-duprec. I can not put a trigger with trigger text 'null;' in each form or inherit an object group and generate again. Can I do something global to remove these key mappings?
Regards
Mona

Virtual Mappings For Forms 11

Hi all,
I am working with forms 11g and I need to create the virtual mapping for physical folder c:\temp on FMW server (Windows 32 bit)
e.g. http://<host>:<port>/forms/temp
I followed all steps explained in the Oracle Support document ID 981095.1 and in Oracle Documentation but the mapping does not work
I have added the following lines to:
Weblogic.xml located in $DOMAIN_HOME/servers/WLS_FORMS/tmp/_WL_user/formsapp_11.1.1/<random_string>/war/WEB-INF
<virtual-directory-mapping>
<local-path>C:\TEMP</local-path>
<url-pattern>temp/*</url-pattern>
</virtual-directory-mapping>
form.conf located in $ORACLE_INSTANCE/config/OHS/<OHS INSTANCE NAME>/moduleconf.
# Virtual path for physical directory of temp
AliasMatch ^/forms/temp/(..*) "C:\TEMP/$1"
WLExcludePathOrMimeType /forms/temp/
http://dc1fmw51:9001/forms/temp/1.txt --> physically located in c:\temp folder
Error 404--Not Found ….
Does anybody have the same problem?
Any help will be appreciated.
Thanks,
Alex

Thanks for your reply!
http://dc1fmw61:9001/temp/test.html is giving the same error message.
http://dc1fmw61:8888/forms - in portlist.ini OHS_LISTEN_PORT is it correctone ?
Failure of server APACHE bridge:
No backend server available
If found this in Oracle Doc forms 11g services deployment guide:
The virtual path definition in the weblogic.xml file for /forms/java allowsthe applet code to be loaded from the Web server.
But in the weblogic.xml on my server I didn't find any mapping for /forms/Java . There are no mappings at all
So where it could be defined?
Here is my weblogic.xml file:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-web-app xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<virtual-directory-mapping>
<local-path>C:\TEMP</local-path>
<url-pattern>temp/*</url-pattern>
</virtual-directory-mapping>
<session-descriptor>
<timeout-secs>7200</timeout-secs>
<invalidation-interval-secs>120</invalidation-interval-secs>
<debug-enabled>false</debug-enabled>
<id-length>52</id-length>
<tracking-enabled>true</tracking-enabled>
<cache-size>1024</cache-size>
<max-in-memory-sessions>-1</max-in-memory-sessions>
<cookies-enabled>false</cookies-enabled>
</session-descriptor>

<security-role-assignment>
<role-name>formsadmin</role-name>
<principal-name>Administrators</principal-name>
</security-role-assignment>
</weblogic-web-app>
Regards

Path Mapping popup issue

If anyone else has an issue with the "Path Mapping" popup appearing when debugging a Flex and PHP application on your local Zend Server, here is the solution.
When you first install Flash Builder 4.5 for PHP, it will remind you to download and install Zend Server CE.
Once you have done that, the next time you start Flash Builder, you get this.
Unfortunately, Flash Builder for PHP did not configure Path Mapping for Zend Server CE correctly. When I create a combined Flex and PHP project, and go to debug it, I got this:
The popup appears like 100 times for various php classes in the framework. I would select the bottom option of "Get content from the server for the following path:" I would have to go through 5 minutes of clicking these popups before finally getting my application to launch.
The problem turned out to be the Path Mapping. If you go to Preferences --> PHP --> PHP Servers, you will see that the Local Zend Server has been added as the default. Select it and click the Edit button. Then select the Path Mapping tab.
The entry for Zend Framework will point to a wrong server path.
The "Path on Server" is set to /usr/local/zend/ZendServer/share/ZendFramework/library
It should be set to /usr/local/zend/share/ZendFramework/library
Once I changed it, the popups no longer appeared.

Jamie
I just managed to install and setup Builder 4.5 for PHP with Zend Debugger.
It was quite a headache to enable Zend Debugger on WAMP server. I have been forced to downgrade PHP to ver 5.2.11 (and subsequently to downgrade Apache version to 2.0.63) to make it work. Anyways, not a good start but I thought, ok, finally some progress. At the moment I am faced with same issue as reported in that post however I am not sure how to setup path mapping(s) so I wont be presented with 30-50 popups when trying to debug my PHP classes.
I tried to check the status of reported bug you have mentioned but link seems to be broken.
Example of first popup I am presented with:
Path Mapping - Select Local Resource
Select the local resource that matches the following server path:
...Adobe Flash Builder 4.5\.metadata\.plugins\org.zend.php.framework.resource\resources\ZendFramework-1\library\ Zend\Loader.php
Get content from the server to the following path:
C:\Users\Michael\Adobe Flash Builder 4.5\.metadata\.plugins\org.zend.php.framework.resource\resources\ZendFramework-1\library\ Zend\Loader.php
Once I will confirm that popup I am presented with another 30-50 of these. After all is confirmed I am finally able to debug my code.
Can anyone please advise how to setup this mapping?
PS. I can create a separate mapping for each php file that is mentioned but surely there should be better way than defining 30-50 separate mappings...
Regards
Michael
Nevermind, I have decided to create mapping for all 30-50 files. It works fine now. Good thing its a global setting and does not have to be set for each project separately;)
Message was edited by: Michael Orzechowski

Configuring Virtual MAC Addresses on ASA

Hello,
I configure the virtual MAC address for a interface on ASA 5520, will enter the following command on the active unit:
failover mac address Inside 0012.3456.789a 0023.4567.89ab
The active MAC address is of the same as the Inside's burned-in MAC address of the active unit.
Similarly, the standby MAC address is of the same as the Inside's burned-in MAC address of the standby unit.
Do I get the effect of failover mac address command?
Thank you for your cooperation in advance.

Hi Bro
That’s fine really. There’s nothing wrong if you’ve configured the active MAC address the same as the Inside's burned-in MAC address of the active unit.
In an Active/Standby failover, the MAC addresses for the primary unit are always associated with the active IP addresses. If the secondary unit boots first and becomes active, it uses the burned-in MAC address for its interfaces. When the primary unit comes online, the secondary unit obtains the MAC addresses from the primary unit. The change can disrupt network traffic.
You can configure virtual MAC addresses for each interface to ensure that the secondary unit uses the correct MAC addresses when it is the active unit, even if it comes online before the primary unit. If you do not specify virtual MAC addresses the failover pair uses the burned-in NIC addresses as the MAC addresses.
P/S: If you think this comment is useful, please do rate them nicely :-)

Several paths with the virtual-directory-mapping in weblogic.xml

Hello! I don´t know if this is well posted here. Sorry, and my english is aswful :(.
I´m trying to put several paths for jsp files in an application, similar to how the extendend document root works in websphere.
How can I get this on weblogic? With this lines I only managed to get the first but the second url-pattern doesn´t work.
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>/path1/</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
<virtual-directory-mapping>
<local-path>/path2</local-path>
<url-pattern>/jsp/*.jsp</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
My intention is make that the app could access to jsp´s files in path1 and in path2. Is this possible on weblogic?
Thanks in advance

I see. In my case, x == images, so if I reverse my directory
structure I could still get this to work for me. For instance:
<virtual-directory-mapping>
<local-path>C:\webapps\context\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
/images/z.gif would map to C:\webapps\context\y\images\z.gif.
I'll have to weigh changing our directory structure vs. keeping the
servlet we have that rewrites the URL.
Thanks for your help.
Scott Steimle.
Rajesh Mirchandani <[email protected]> wrote in message news:<[email protected]>...
From the developer
Virtual directories just replace the doc root. The doc root in your case
is C:\webapps\context\x\y. The request uri is /images/Z.gif. So the whole
thing resolves to C:\webapps\context\x\y\images\Z.gif. Which is where the
image should be located.
We have cleared up the docs. Sorry for any inconvenience.
Scott Steimle wrote:
Hi. I noticed in WebLogic Platform 7.0 there is a entry for
WEB-INF/weblogic.xml that defines a virtual directory. Example:
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web
Application 7.0//EN"
"http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>C:\webapps\context\x\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
In this case I'm assuming that a request of the form
http:/host:7001/context/images/z.gif would map to the physical file
C:\webapps\context\x\y\z.gif. However I cannot get this to work. Is
my assumption about it's use incorrect? Is the syntax of
<local-path/> or <url-pattern/> wrong? Is there something you have to
do to get WebLogic to recognize the weblogin.xml file?
This is urgent. Please help.
Thanks.
Scott Steimle
Software Engineer
Convera

How to configure the virtual path with our web listener

Oracle Apps Version: 11.5.10.2
Oracle database: 10.2
platform: Windows server 2003
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.

Hi,
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Do you mean (Patch 6194129)? How do you get this error? Is it at the beginning or the end of the installation?
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Please make sure you source the application env file before applying this patch, and select 8.0.6 ORACLE_HOME.
Thanks,
Hussein

[ACTION] Please configure the following virtual path with your web listener: /jinitia

Hi Guys,
Would kindly suggest me. How to solve this following setting? From the documentation, I could not understand, which file or where should I do the following configuration.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory C:\ORACLE\iSuites\tools\web60\temp.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory C:\ORACLE\iSuites\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory C:\ORACLE\iSuites\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory C:\ORACLE\iSuites\tools\web60\cgi.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory C:\ORACLE\iSuites\JINIT
I appreciate your information and help.
Thanks,
Amit

Hi,
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Do you mean (Patch 6194129)? How do you get this error? Is it at the beginning or the end of the installation?
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Please make sure you source the application env file before applying this patch, and select 8.0.6 ORACLE_HOME.
Thanks,
Hussein

Virtual directory mapping: how to use variable in local-path element

Hi all
We are using a virtual-directory-mapping declaration in the deployment descriptor
for our web application to load jsp'a and other files from the file system.
This declaration looks like this:
<virtual-directory-mapping>
<local-path>c:/views/jsp</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
Here is my question:
Is there a possibility to use a variable in the local-path element? Something
like:
<virtual-directory-mapping>
<local-path>%PATH_TO_JSP%</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
If yes, how does it look like? My example above didn't work.
If no, is there another way to do that?
Thanks in advance
Regards
Iwan

posting to servlets newsgroup
"Iwan Bussmann" <[email protected]> wrote in message
news:[email protected]..
>
Hi all
We are using a virtual-directory-mapping declaration in the deploymentdescriptor
for our web application to load jsp'a and other files from the filesystem.
This declaration looks like this:
<virtual-directory-mapping>
<local-path>c:/views/jsp</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
Here is my question:
Is there a possibility to use a variable in the local-path element?Something
like:
<virtual-directory-mapping>
<local-path>%PATH_TO_JSP%</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
If yes, how does it look like? My example above didn't work.
If no, is there another way to do that?
Thanks in advance
Regards
Iwan

Can't invoke PL/SQL cartridge for non-default virtual path

I have a problem invoking a cartridge if the virtual path is
anything but the default (/<appName>/<cartName>).
I have tried stopping and re-starting the application server, but
that does not help.
Does anyone have a solution to this problem?
Amar.
null

Elton Barendse (guest) wrote:
: Amar Pai (guest) wrote:
: : I have a problem invoking a cartridge if the virtual path is
: : anything but the default (/<appName>/<cartName>).
: : I have tried stopping and re-starting the application
server,
: but
: : that does not help.
: : Does anyone have a solution to this problem?
: : Amar.
: Hi Amar,
: Can't help you solve your immediate problem, but here's some
: food for thought ...
: Quintessence Systems Ltd (UK) have developed technology which
: automatically migrates PL/SQL procedures and packages to Java.
: This is in response to the many customers who are looking to
: move to a more open and non platform specific architecture for
: enterprise wide business logic.
: The Java code generated can be deployed in either Oracle 8i or
: in an App Server i.e. no need to wrap your existing procedures
: in a PL/SQL cartridge.
: If this is of interest, I'd be happy to put you in touch with
: our technical people to explain to technology in greater
detail.
: Elton Barendse
: CEO
: Quintessence Systems Limited
I had a similar problem and maybe it would resolve your troubles
I don't know but I configured the PL/SQL cartridge and it did
not work actually it was just a pb of virtual memory ,set your
mmory to 600M and restart all the stuff.I don't think it will
resolve the pb but think of it.
steve
null

Context mapping for Interactive ADOBE form

I could able to create the form context from the web dynpro context. I am stucked at mapping between the two contexts.
When I insert the element Interactive form in the layout of Web Dynpro and specify the template source,
We have the option of automatically generate the context from form interface and binding form object to the
This context. But I got stucked at the point of mapping between the two. The structure is not appearing in the web dynpro context after mapping. Can anybody tell is there any procedural error or any configuration is required?

For further questions, check the follow
https://www.sdn.sap.com/irj/sdn/adobe
Improving the Performance of Adobe® LiveCycleu2122 Designer Forms(scripting)
http://www.adobe.com/devnet/livecycle/articles/lc_designer_perf_guidelines.pdf
Interactive Forms Based on Adobe Software: Overview
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e635e290-0201-0010-a9be-9e8e4ce04770
Adobe Interactive Forms
http://www.saplounge.be/Files/media/pdf/Huberland-Interactive-Forms-2007.10.10.pdf
Taking interactive forms to next level
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8c103c36-0301-0010-cda8-f6b381bedb6e
Introduction to Adobe PDF Library SDK(PDFL SDK)(Simply scroll the document)
http://partners.adobe.com/public/developer/en/webseminars/PDFL_WebSeminar.pdf
Creating Interactive forms in webdynpro for java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
PDF-Based Print Forms/SAP Interactive Forms by Adobe
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm
Date Objects in Adobe Designer
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
Checking and Testing a PDF-Based Print Form
http://help.sap.com/saphelp_nw04s/helpdata/en/c2/1fe9aa4d7b413e8515f90b73729e97/frameset.htm
Architecture
http://help.sap.com/saphelp_nw04/helpdata/en/f2/21021b911f4c0cae11459a4ce0bc62/frameset.htm
http://www.nl4b.com/Adobe/Invitation_SAPBrussels_Q407.pdf

Configure virtual path mapping for forms 11.1.2

Similar Messages

Maybe you are looking for