Configuring date.timezone in PHP 5.3 Under OS X?

I'm trying to get Joomla 1.15 working properly on my laptop. I'm running Snow Leopard (OS X 10.6.2) I have error messages like this one:
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /Library/WebServer/Documents/joomlafive/libraries/joomla/utilities/date.php on line 56
Apparently, Apple somehow turned off date.timezone when it included PHP 5.3.
PHP seems to be using /private/etc/apache2/php.ini. I've got this line enabled: date.timezone = America/New_York
But even after I shut down and restart Apache, and check phpInfo(), I see no value listed for date.timezone. When I make /private/etc/php.ini (using a copy php.ini.default) active, Joomla won't run as connection to MySQL is lost. Upon closer look, this file is significantly different from /private/etc/apache2/php.ini.
How can I get the date.timezone working properly so that I don't get tons of error messages whenever I navigate through Joomla?

Try suggestions in this thread: http://discussions.apple.com/thread.jspa?messageID=12512508&#12512508

Similar Messages

When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

When i install latest itunes gives an error the configuration data for this product is corrupt.how can i i fix it

hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards

HP Stream 7 The boot configuration data file is missing some required information

I have an HP Stream 7 tablet. When I open it up it shows a blue screen with the error "The boot configuration data file is missing some required information." Can anyone help as I can't get into the tablet to solve the error!

Hey @PaD2 ,
Welcome to the HP forums.
I understand you're unable to boot up your Stream 7 tablet.
Try accessing the recovery partition by holding the volume down button and power button at the same time. Please excuse my ignorance, as exact information on accessing the recovery manager appears to be unavailable for this exact model. If the down button doesn't work, up should get you in.
Once in the recovery manager you should be able to select Troubleshoot > Startup repair.
If the startup repair does not fix the issue I would suggest trying the full system recovery option, which you should find under Troubleshoot > Advanced.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Configure: error: Cannot find php-config

After security update 2008-002 for Leopard, the PHP module builder stops, because the PHP version running on the machine doesn't match the header files from the PHP-developer part. More info see: http://www.naquah.net/blog/dennis/2008/03/20/how-to-get-eaccelerator-working-aga in-after-installing-security-update-2008-0#comment-50
After editing /usr/bin/php-config
Change
version="5.2.4" to version="5.2.5" and
vernum="50204" to vernum="50205"
and /usr/include/php/main/php_version.h
Change
#define PHPRELEASEVERSION 4 to #define PHPRELEASEVERSION 5
#define PHP_VERSION "5.2.4" to #define PHP_VERSION "5.2.5" and
#define PHPVERSIONID 50204 to #define PHPVERSIONID 50205
the ./configure command stops with a:
configure: error: Cannot find php-config. Please use --with-php-config=PATH
even when explicitly specifying the php-config location, the ./configure --with-php-config=/usr/bin/php-config command still throws an identical error.
The file is there, accessible and not empty:
$ ls -l /usr/bin/php-config
-r-xr-xr-x 1 root wheel 3031 22 mrt 21:44 /usr/bin/php-config
$ head /usr/bin/php-config
#! /bin/sh
SED="/usr/bin/sed"
prefix="/usr"
exec_prefix="${prefix}"
version="5.2.5"
vernum="50205"
include_dir="${prefix}/include/php"
includes="-I$include_dir -I$include_dir/main -I$include_dir/TSRM -I$include_dir/Zend -I$include_dir/ext -I$include_dir/ext/date/lib"
ldflags=" -L/usr/lib/mysql"
Re installing Xcode 3.0 didn't solve the problem.
What could be done to repair the (php) configure command, to allow me to build php modules again?

On my installation I have both NVidia and mesa drivers installed, thus two sets of GL headers/libraries.
For Mesa: SUNWxorg-mesa
Nvidia: NVDAgraphics
If you want to develop on your system you may want to install much more than just GL headers.
Its a pity that Solaris packaging is not really flexible, so you better do a full install indeed...
regards,
__Fedor.

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

Configure data guard broker on Oracle 11.2.0.1

Our primary is a 3 node RAC of 11.2.0.1 on Redhat 5.2. The physical standby is a single instance on redhat 5.2. After configured data guard, I am trying to configure data guard broker following docOracle® Data Guard Broker 11g Release 2 (11.2)
E10702-01
It says to add a entry to the listener.ora file
LISTENER = (DESCRIPTION =
(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=host_name)
(PORT=port_num))))
SID_LIST_LISTENER=(SID_LIST=(SID_DESC=(SID_NAME=sid_name)
(GLOBAL_DBNAME=db_unique_name_DGMGRL.db_domain)
(ORACLE_HOME=oracle_home)))My lstener.ora under grid_home is LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER))))            # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1))))                # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON              # line added by AgentAfter addedLISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = cchORdb1)(PORT = 1521))
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = cchprd_DGMGRL)
      (SID_NAME = cchprd)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
)I started the listener and got errorLSNRCTL> start
Starting /u01/app/grid/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/grid/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/cchORdb1/listener/alert/log.xml
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cchORdb1)(PORT=1521)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
   Linux Error: 98: Address already in use
Listener failed to start. See the error message(s) above..Without the Listener and SID_LIST_LISTENER entries, the grid infrastucture appear to manage a default listener and works OK. After add these, it appears to conflick with the default setting. I also tried to add a different listener name, then I got messge LISTENER is already startedHow should one handle this problem?
Thanks.

Shutdown the listener and check for white spaces in the file. Try to restart it. If if fails review against my example below.
Here is my working example:
PRIMARY
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary.myserver.com)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0)
(PROGRAM = extproc)
(SID_DESC =
(global_dbname = PRIMARY_DGMGRL.myserver.com)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0)
(SID_NAME = PRIMARY)
STANDBY
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = standby.mydomain.com)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0)
(PROGRAM = extproc)
(SID_DESC =
(global_dbname = STANDBY_DGMGRL.mydomain.com)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0)
(sid_name = STANDBY)
ADR_BASE_LISTENER = /u01/app/oracle
INBOUND_CONNECT_TIMEOUT_LISTENER=120
When I first tried to setup this up several months ago I had this issue:
ORA-12514 during SWITCHOVER
Problem: You perform a switchover using DGMGRL. Though the switchover itself completes successful, databases don't get started up again. Instead, DGMGRL output holds an
ORA-12514: TNS:listener does not currently know of service requested in connect
Cause: This is a configuration issue: DGMGRL needs a special entry in the listener.ora.
Solution: Details on this can be found in the Metalink note 308943.1. Make sure both, your primary and standby database have an explicit entry in the listener.ora like this:
SID_LIST_LISTENER = (
SID_LIST = (
SID_DESC = ( GLOBAL_DBNAME = <db_unique_name>DGMGRL.<dbdomain> )
( SERVICE_NAME = <db_unique_name>.<db_domain> )
( SID_NAME = <ORACLE_SID> )
( ORACLE_HOME = <ORACLE_HOME> )
Take special care, that:
* <db_unique_name> reflects the databases unique name (SHOW PARAMETER db_unique_name)
* <db_domain> reflects the databases domain (SHOW PARAMETER db_domain)
* <ORACLE_SID> and <ORACLE_HOME> reflect the corresponding settings of the database
Having adjusted your listener.ora files, restart the listener (lsnrctl stop && lsnrctl start). Give your databases a few minutes to register with the listener again, and then - just to be on the safe side - let the listener tell you its configuration: lsnrctl status && lsnrctl services. Check the output if everything matches.
Edited by: mseberg on Dec 10, 2010 8:01 AM

Bonjour64 error: "The configuration data for this product is corrupt. Contact your support personnel."

Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

GSS stuck in "waiting for configuration data"

One of my clients have 2 GSS 4900 running ver 4.1(1)
I can not get the gss service running properly in the one running gssm-secondary. Gssm service looks like it starts but if I check "gss status" och "show system status" in it is waiting for configuration data
NTM-GSS-002.nt.se#show system-status
Cisco GSS - 4.1(1) GSSM - standby [Tue Nov 12 16:10:21 UTC 2013]
Registered to primary GSSM: 10.16.0.15
Routing component waiting for configuration data (wait a minute). [runmode = 3]
START SERVER
16:01 Config Agent (crdirector)
16:01 Config Server (crm)
16:01 Database
16:01 GUI Server (tomcat)
16:01 Node Manager
16:01 Web Server (apache)
Ping works fine between the the GSS:es and there is no firewall involved (both are located on the same ip subnet).
I did gss stop and then gss start. Waited for 24 hours but the status is the same.
If I run tcpdump on the secondary I can see TCP and UDP traffic between the primary and the secondary though all UDP packets have a bad checksum warning.
I have no idea on how to t-shoot this. Should I do gss disable, remove this gss from the primary gssm and enable gss again in the secondary?
Any takers?

Hi,
There seems to be some communication problem. You can do the following and see if GSS goes to runmode=5.
On the standby:
gss stop
gss disable
Then, go into the GUI of the GSSM and delete the standby GSS from the
resources tab
Then go to standby:
gss enable gssm-standby x.x.x.x (IP of primary )
Then in the GUI of primary GSSM, you will again see the standby in the
resources tab. Click on it, and check on the activate button, then hit
submit.
Make sure the standby goes to runmode 5 under "gss status" output.
If this doesn't work then you can try the below:
Go to the GUI of the GSSM and delete the standby GSS from the resources tab.
On the standby:
gss stop
restore-factory-defaults
Make sure you have a console connection so you can do the initial config on the Standby
GSS (add IP, etc). Once done, enter standby:
gss enable gssm-standby x.x.x.x
Then in the GUI of primary GSSM, you will again see the standby in the resources tab.
Click on it, and check on the activate button, then hit submit. Make sure the standby goes
to runmode 5.
Regards,
Kanwal

Client copy with configuration data in R/3. Is there any effect on EBP sys

Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advance

waiting online

PI 7.3 - AEX "unable to read configuration data" and login problems

Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PM

hi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant Kunjir

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

Configuring date.timezone in PHP 5.3 Under OS X?

Similar Messages

Maybe you are looking for