CONNECT BY ERROR

Hi Experts.
I have the following query but when running it, i get this error:
ORA-01436: CONNECT BY loop in user data
Any ideas what it could be???
update people_live live
set directs = ( select count(*)
from people_live
where mgr_person_id = live.person_id ),
total_reports = ( select count(*)-1
from people_live
start with person_id = live.person_id
connect by mgr_person_id = prior person_id ),
tenure_more = ( select count(*)
from people_live
where hiredate < live.hiredate ),
tenure_less = ( select count(*)
from people_live
where hiredate > live.hiredate );
Thank you in advance. DAN :)

As Damorgan said, 600 = Support.
Aside from that, you can attempt to rewrite the query.
Moving the nested query (where you check a.userid IN) into a pipelined function is one option. As is the Temp Table you've already mentioned.
You say that you cannot make any 'major' changes so i'm not really sure what you consider 'major', a pipelined function or GTT doesn't seem too major to me.
But your options are limited to .... change it..... or work with support to fix it.

Similar Messages

  • Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)

    Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
    This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
    I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
    I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
    Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.

    Ok, so let's start at step 1:
    SP 1 just released and I'd recommend applying that. The SO is available from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
    For future reference, msm matching the above SP is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
    and msi is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
    Step 2: a few questions:
    a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
    b) what is the database you are connecting to?
    c) is this a web or a win app?
    Step 3:  As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
    1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
    2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
    3) If that works, use a report with subreports
    4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
    5) Run the new report in your new app, enter the PWD when prompted
    6) If this works, add your database logon code
    7) If that works, add your original report (again, preferably with no subreports)
    8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
    9) If it works, see if you can determine the difference between your old app and the new app.
    Ludek

  • Configure Synchronization Connections An error has occurred while accessing the SQL Server database

    Hi,
    i am getting following error message
    Central Administration --> Synchronization Connections
    An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
    If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
    Central Administration -->  Manage Profile Service: User Profile Service Application --> Manage User Properties
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3bce5a11-f2dc-4788
    Please tell how to fix it.
    iffi

    Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
    for  User profile page not display  number of count in the page first check services , connection , 
    IISRESET /NOFORCE   /  timer services restart 
    Deepesh Yevle MCTS

  • Why do i keep getting the "internet connection timeout" error message?

    i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

    yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

  • Connection Failed Error while Importing tables in 11.1.1.6 on Windows 7

    Hi,
    Can you please help me in resolving the connection failed error while importing the tables from the database.
    I am using OBI 11.1.1.6 on Windows 7
    You help is highly appreciated. I have followed all the below blogs but still i was not able to resolve the issue.
    http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
    http://obieedeveloper.blogspot.in/2012/03/connection-failed-error-in-obiee-11-g.html
    http://iadviseblog.wordpress.com/2011/05/29/obiee-11g-error-in-importing-metadata/
    http://www.obieefans.com/%E2%80%9Cthe-connection-has-failed%E2%80%9D-error-in-obiee-11g-admin-tool/
    Thanks in Advance
    Siva

    It would be nice if you put your issues instead of asking to look those many urls.
    try using tns entry in connection pool or follow this thread
    Connection failed in OBIEE 11g

  • Can't connect via Airport -- "connection timeout" error, instead

    I've got a MacBook Pro here, which was successfully connected online via Airport, under OS X 10.4.11.
    Then I upgraded to Leopard (10.5), and the machine would no longer connect automatically to the router.
    OK, I tried manually configuring the wireless connection, but no luck. So, I brought in an old iBook G4 running the same OS (10.5), and successfully linked it to the router, wirelessly, via Airport.
    Copying the procedure that worked with the iBook -- to the MBPro -- did not help. Still getting a "connection timeout" error message.
    So I performed a fresh install of 10.5 -- and I even DLed the Software Updates, including two that were supposed to improve Airport functionality -- and tried again. No luck.
    Any suggestions?
    TIA.

    John,
    I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
    1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
    2. Click Apply and quit System Preferences.
    3. Put the computer to sleep.
    4. Wake the computer.
    5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
    6. Click Apply and Quit the Network Preferences.
    7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
    8. Verify connectivity
    9. Put the computer to sleep.
    10. Wake the computer.
    11. Verify connectivity
    HTH

  • How to solve Error in http connection. Error -1

    urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
    [j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
    [j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
    [j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
    [j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
    [j2mepolish] Generic/DefaultColorPhone: respCode=====-1
    [j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
    Why is this error coming? How to solve it?
    Thanks in advance.
    Edited by: J2me_Beginner on Jun 7, 2009 9:38 PM

    I am making a form using an interface. When Activate the Form, I got this error:
    Invalid HTTP connection: ADS
    Message no. FPRUN000
    But I do not know how to solve or config ADS. Any one know how to slove this error ?
    Thanks a lot.

  • I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hi,
    I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hello there hastibahreini,
    It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.

    When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.  I am running Windows 8.  My device is directly connected to the computer.  I can print from the computer to the printer without issue.  I get this error when using the controls on the device. 
    If I try to use the MF Toolbox - Scan Function controls, I get the following error message: "This action cannot be completed because the other program is busy.  Choose 'Switch To' to activate the busy program and correct the problem."  When I click "Switch To", it brings me to the Windows 8 tiles screen but does not resolve the issue.
    Please help!

    Hi h_rankin.
    I recommend uninstalling and reinstalling the drivers and software.  Please follow the steps below to perform the operation:
    1.  Unplug the USB cable from the printer.
     2.  Press the Windows key and 'x'.
     3.  Select 'Control Panel'.
     4.  Select Devices and Printers.  The Devices and Printers window opens.
     5.  In the Devices and Printers window, right click on the MF8000 Series and select 'Remove' to delete the printer.  Delete all of the icons for the MF8050Cn.
     6.  Close the Devices and Printers window then press the Windows key and 'x'.
     7.  Select 'Control Panel'.
     8.  Select 'Programs and Features'.
     9.  Double click on driver to uninstall.  Follow the on screen prompts.  Repeat to uninstall the MF Tool box.
    10.  Restart you computer.
    Once your computer restarts, please follow these steps to download and install the drivers and the MF Toolbox from Canon's web site:
     1.  Visit our web site at: http://www.usa.canon.com.
     2.  After clicking SUPPORT & DRIVERS in the top right corner, select your model in the following manner:
         a.  From the first menu, select CONSUMER & HOME OFFICE.
         b.  From the second menu, select PRINTERS & MULTIFUNCTION.
         c.  From the third menu, select your series, IMAGECLASS SERIES.
         d.  From the fourth menu, click DRIVERS & SOFTWARE under imageCLASS MF8050Cn.
     3.  Click the drop-down arrow and change the operating system to Windows 8 (x64).
     4.  Click on 'DRIVERS', then click on [Windows 64bit] imageCLASS MF8050Cn MF Drivers file. 
     5.  Click on I Agree - Begin Download on the next page.
     6.  When the Save As box comes up, choose Desktop and click Save. 
     7.  Once the download is complete, click on 'I Decline- Go Back' and you will return to the previous page.
     8.  Click on 'SOFTWARE', then click on the [Windows 32bit & 64bit] Tool Box Ver.4.9.1 file.
     9.  Click on I Agree - Begin Download on the next page.
    10.  When the Save As box comes up, choose Desktop and click Save. 
    11.  Once the download is complete, close all windows.
    12.  Double click the [ToolBox_4911mf16_Win_EN.exe ] file on the Desktop.  Follow the prompts to install the MF Toolbox.
    13.  Double click the [MF8050Cn_MFDrivers_W64_us_EN_2.exe] files to decompress them.  A new folder will be created on the Desktop.  The new folder has the same name as the decompressed file.  Double-click the decompressed Setup.exe file to start installation.
    14.  Once that window goes away, connect the USB cable from the MF8050Cn to the computer.  Installation will complete.
    Wait a few minutes then scan a document using the MF Toolbox.
    If you still experience any errors, or need any further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). 
    Have a good day.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Connection timeout error in web report(portal)

    Hi Experts,
    Points to note about the 500 connection timeout error
    1. Error persists only in portal. query/ report works fine in RSRT and Bex Analyser.
    2.As per previous discussions tried implementing SAP notes to change ICM parameter for max of 10 minutes.
    However, it is said by Basis team that they can change parameter only if all the report gives the same error.
    Since all the report works fine they are nt ready to change the parameter.
    4. Error: Time exceeds 600seconds
    5.This issue arised only after upgrading the system to 7.3. post - upgrade. this report was working fine before.
    6. Even in the portal, report works fine when we use ABAP web link.
    Please share your suggestions.

    In the trace file there is a error message for this report "Could not find a command, masscommand or group command with alias <new task>. It is defined in group . <TaskCollectionGroup>. pls any one help me. This is for 7.31 NW portal

  • FTP Adapter ORABPEL-11407 Connection closed error.

    Hiiii friends
    I have configured the connection factory for FTP Adapter (not defined any connection pool). My BPEL process poll the ftp location to get the file.
    But no bpel instance is getting generated and domain.log shows the following error. Can you help me in this issue ?
    +<2009-06-26 04:09:59,140> <INFO> <default.collaxa.cube.engine.deployment> Process "ReadEmp" (revision "1.0") successfully loaded.+
    +<2009-06-26 04:10:10,666> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::init - Initializing the JCA activation age+
    nt, processId='bpel://localhost/default/ReadEmp~1.0/
    +<2009-06-26 04:10:10,667> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and+
    initializing inbound JCA endpoint for:
    process='bpel://localhost/default/ReadEmp~1.0/'
    +<2009-06-26 04:10:10,667> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and+
    initializing inbound JCA endpoint for:
    process='bpel://localhost/default/ReadEmp~1.0/'
    domain='default'
    WSDL location='ReadEmpPL.wsdl'
    portType='GetEmpOp_ptt'
    operation='GetEmpOp'
    +activation properties={portType=GetEmpOp_ptt}+
    +<2009-06-26 04:10:10,678> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for p+
    ortType=GetEmpOp_ptt, operation=GetEmpOp
    +<2009-06-26 04:10:10,763> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> ENDPOINT ACTIVATION CALLED IN FTP ADAPTER+
    +<2009-06-26 04:10:10,765> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed e+
    ndpointActivation for portType=GetEmpOp_ptt, operation=GetEmpOp
    +<2009-06-26 04:10:10,765> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created+
    +<2009-06-26 04:10:40,516> <WARN> <default.collaxa.cube.activation> <File Adapter::Inbound> PollWork::run exiting, Worker thread will die+
    +<2009-06-26 04:20:11,382> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11407+
    Connection closed error.
    Connection closed for Host: corpdevapp10.
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    +<2009-06-26 04:20:41,429> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created+
    I am not sure what exactly is happening here. I have already established the successful connection with the same FTP server using different FTP clients.

    sounds like the ftp server closed the connection. did you try to use other ftp clients from the same machine where the bpel engine is running?
    Mark

  • Webservice Connection Timeout Error in Sun Java System Application server

    I have a java code to connect to Ebay Shopping Webservice that uses the client stub generated through Axis. The code works fine when I run it from the main method of a stand alone Java application. Which means there is no issue with the Proxy settings or any other network setting that could block the webservice from my system. However when I use the same code inside a JSF based Web Application, a connection timeout error comes up. The Web application is deployed on the Sun Java System Application server. The stacktrace of the exception is
    java.net.ConnectException: Connection timed out: no further information
         at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
         at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:527)
         at com.sun.enterprise.server.ss.provider.ASClientSocketImpl.connect(ASClientSocketImpl.java:206)
         at java.net.Socket.connect(Socket.java:520)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:125)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.ebay.api.soap.ShoppingBindingStub.findProducts(ShoppingBindingStub.java:1217)
         at com.shopping.ebay.EbayServiceUtility.performEBaySearch(EbayServiceUtility.java:66)
         at searchProduct.SearchProductBean.search(SearchProductBean.java:98)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at javax.faces.component.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:77)
         at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:96)
         at javax.faces.component.UICommand.broadcast(UICommand.java:383)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:450)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:759)
         at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:97)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:113)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
         at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
         at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    The JDK version on my machine is 1.5.0_14. Can somebody point me as where I should be looking for errors?

    You need to delete all the files under the 'generated' directory to force the server to recompile them after the JDK upgrade. Also check in domain.xml and make sure the JVM parameter is pointing to the JDK that you have installed. It is also worthwhile to check asenv.conf to see which JDK that file is pointing to as well.

  • WRT54G V3 Web Gui recieves "connection reset" errors on all pages

    Hello,
    I was recently having some connection problems with my WRT54G and decided to upgrade the firmware. The router has been stable for quite some time before the last week. The firmware was from linksys and it uploaded fine and rebooted and all was great.
    When I tried to reconfigure the router settings I ran into trouble. None of the html forms will submit. All of them get "connection reset" errors when I try and update the information. Apparently there was an error in flashing or something. So I think, no prob, I'll just re-flash. Except that the firmware upgrade form also gets connection reset.
    If I type in 192.168.1.1/apply.cgi it works...no connection reset (though nothing comes out). I have a hunch that if I were able to custom form the HTTP post header it might go through.
    I tried TFTPing the new firmware to the router and had no success. Granted I am a mac user so I was in the terminal window instead of using the proprietary tftp util. I always get "transfer timed out" errors. I tried starting the transfer before the router responded to a ping, after, before the power light started flashing, after that, and after it went solid too.
    Any help is appreciated. Thanks.

    Try to update firmware using TFTP program from a windows based PC. You can get tftp from ftp://ftp.linksys.com/pub/network/

  • Flex/Zend channel connect failed error...

    Hi guys.
        I am using Flex and php to develop my project. Everything works great in my local machine. However, when I upload my files to my server (godaddy.com). I got the error when loading my flex application.
    The pop-up error message is
    send failed
    channel.connect.failed.error
    Netconnection.call.Badversion: url:
    http://mydomail/folder/gateway.php
    I have upload my ZendFramewrok folder into my server and amf_config.ini has been configured. (webroot =http://mydomain)
    I am not sure what's going on here. Please help. Thanks.
    Update: my gateway.php
    <?php
    ini_set("display_errors", 1);
    $dir = dirname(__FILE__);
    $webroot = $_SERVER['DOCUMENT_ROOT'];
    $configfile = "$dir/amf_config.ini";
    //default zend install directory
    $zenddir = $webroot. '/ZendFramework/library'; //I did upload the ZendFramwork folder
    //Load ini file and locate zend directory
    if(file_exists($configfile)) {
    $arr=parse_ini_file($configfile,true);
    if(isset($arr['zend']['webroot'])){
      $webroot = $arr['zend']['webroot'];
      $zenddir = $webroot. '/ZendFramework/library';
    if(isset($arr['zend']['zend_path'])){
      $zenddir = $arr['zend']['zend_path'];
    // Setup include path
    //add zend directory to include path
    set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
    // Initialize Zend Framework loader
    require_once 'Zend/Loader/Autoloader.php';
    Zend_Loader_Autoloader::getInstance();
    // Load configuration
    $default_config = new Zend_Config(array("production" => false), true);
    $default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
    $default_config->setReadOnly();
    $amf = $default_config->amf;
    // Store configuration in the registry
    Zend_Registry::set("amf-config", $amf);
    // Initialize AMF Server
    $server = new Zend_Amf_Server();
    $server->setProduction($amf->production);
    if(isset($amf->directories)) {
    $dirs = $amf->directories->toArray();
    foreach($dirs as $dir) {
         // get the first character of the path.
         // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
         $length = strlen($dir);
         $firstChar = $dir;
         if($length >= 1)
          $firstChar = $dir[0];
         if($firstChar != "/"){
          // if the directory is ./ path then we add the webroot only.
          if($dir == "./"){      
           $server->addDirectory($webroot);
          }else{
           $tempPath = $webroot . "/" . $dir;
        $server->addDirectory($tempPath);
      }else{
          $server->addDirectory($dir);     
    // Initialize introspector for non-production
    if(!$amf->production) {
    $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
    $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
    // Handle request
    echo $server->handle();
    Error from gateway.php if I call it directly.
    Warning: require_once(Zend/Loader/Autoloader.php) [function.require-once]: failed to open stream: No such file or directory in /home/content/79/4687979/html/parkerList/gateway.php on line 27
    Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.:/usr/local/php5/lib/php:http://blackwheels.info//ZendFramework/library') in /home/content/79/4687979/html/parkerList/gateway.php on line 27
    gateway.php is the rat. but I still can't figure out what's wrong. Zend/Loader/Autoloader.php is under the server root "ZendFramework/library" folder. I don't understand why my application can't find it. Thanks again!

    You will get a better response if you repost your question on the Flex forums. This forum is for the Livecycle Data Services product.

  • ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

    Hi again,
    I'm on my enterprise management console and Database Instance and Listener shows the green arrow, but the Agent Connection to Instance shows a red downward arrow and the error:
    Status: Failed
    Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)
    My OraClrAgnt service is up and running (using winxp pro, oracle 11gR2), I'm on my home pc, all my ports are open (my machine's name is "abigail" and it is dmzhost)
    Any suggestions to resolve this error?
    My Tnsnames ora:
    ABIGAIL =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = orcl.0.0.10)
    LISTENER_ORCL =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
        (CONNECT_DATA =
          (SID = ORCL)
    RMAN =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = rman.abigail)
    My listener.ora
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = CLRExtProc)
          (ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)
          (PROGRAM = extproc)
          (ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")  
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
          (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    ADR_BASE_LISTENER = E:\app\abigail
    My SQLNET.ORA
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES, LOCALHOST)
    NAMES.TRACE_LEVEL = ADMIN
    My alert file
    <msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='ABIGAIL'
    host_addr='::1'>
    <txt>10-OCT-2013 20:47:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=SYSTEM))(SERVICE_NAME=orcl.0.0.10)) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=38289)) * establish * orcl.0.0.10 * 12518
    </txt>
    </msg>
    <msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='ABIGAIL'
    host_addr='::1'>
    <txt>TNS-12518: TNS:listener could not hand off client connection
    TNS-12560: TNS:protocol adapter error
    </txt>
    </msg>
    My listener status and services
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date                10-OCT-2013 22:47:58
    Uptime                    0 days 0 hr. 2 min. 1 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l
    istener.ora
    Listener Log File         e:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale
    rt\log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl.0.0.10" has 1 instance(s).
      Instance "orcl", status READY, has 8 handler(s) for this service...
    The command completed successfully
    LSNRCTL> services
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:0 refused:0
             LOCAL SERVER
    Service "orcl.0.0.10" has 1 instance(s).
      Instance "orcl", status READY, has 8 handler(s) for this service...
        Handler(s):
          "D006" established:0 refused:0 current:0 max:800 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 1312>
             (ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1060))
          "D005" established:0 refused:12 current:0 max:800 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 1288>
             (ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1061))
          "D004" established:0 refused:1 current:1 max:16383 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 1260>
             (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1063))
          "D003" established:0 refused:1 current:1 max:16383 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 1140>
             (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1062))
          "D002" established:0 refused:1 current:1 max:16383 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 140>
             (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1059))
          "D001" established:0 refused:1 current:1 max:16383 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 1072>
             (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1057))
          "D000" established:0 refused:1 current:1 max:16383 state:ready
             DISPATCHER <machine: ABIGAIL, pid: 748>
             (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1058))
          "DEDICATED" established:0 refused:0 state:ready
             LOCAL SERVER
    The command completed successfully

    I added this on my listener.ora
    DIRECT_HANDOFF_TTC_LISTENER=OFF
    Works now!
    Moral of the story, google is ur friend lol. Thanks for the reply tho!

  • Iphone 5 Screen is Frozen Connection Timeout Error Connection to this app has timed out

    I upgraded to IOS 7 just a few hours before my Iphone 5 screen froze and I cannot make changes -  I have a Connection Timeout Error with Connection to this app has timed out.  With Ok in blue.  The screen doesn't respond,  I can turn off the phone, tap OK or do anthing.  Any advice on how I can reset or fix?

    Check for any anti-virus or anti-spyware software you might have. Temporarily disable that to continue. Normally this is what will cause a timeout. I assume you have a good Internet connection?

Maybe you are looking for