Connection Exceeds

hi
I am using SQl Server and JRUn for My application
When I tried to Connect to the Sql Server thro JSp -
i Encountered the Following Error in some times
Login failed - The maximum simultaneous user count of 10 licenses for this
server has been exceeded. Additional licenses should be obtained
Any Help Appreciated

What JDBC driver are you using. Some of the JDBC drivers come with restricted number of connections on there trial use. Check you license you got for the JDBC driver that should tell you how many max. concurrent connections you can use with that driver.
Also as one of the posters said check you are closing all the connections.

Similar Messages

Hyperion Financial Reports Studio Error. Max No of connections exceeded.

I have encountered an error in FR Studio, it says Max No of Connections Exceeded.
It occured twice in this month, everytime it happens we need to restart Reporting and Analysis Framework. Can someone suggest where can I increase the max no of connections allowed?

Ok...My bad..
You will have tun serviceconfig.sh under Hyperion_Home\products\Foundation\workspace\bin to bring up GUI,then From the menu available you will see Remote service configurator,select that and provide the credentials.After you login,there should RM1 and SB1.You will have to go o properties of RM1 and SB1 and then increase the connection.Restart is required for this to take affect.
Let me know

Ora-00020 maximum no .of connections exceeded

Hi All,
I tried to connect the production Db is says Maximum number of connections exceeded.
How to overcome this situation.
I stoppped and bounced the Db.
The process paramter in pfile is 50
Is there any to overcome this

c:\sql>oerr ora 00020
00020, 00000, "maximum number of processes (%s) exceeded"
*Cause: All process state objects are in use.
*Action: Increase the value of the PROCESSES initialization parameter.
Increasing the PROCESSES parameter as suggested by the error information would remove the issue.
If the database has been working fine for an extending period of time without this error you should consider finding out what caused the increase so you can set parameter appropriately. Could be an increase in use or an application leaking connections.

Maximum no of connections exceeded. Can not connect

We are getting this error: maximum no of connections exceeded. I tried to login from sqlplus as / sysdba but getting same error. What is the best way to login to Oracle and kill some sessions?
Oracle Version: 11g

I tried to login from sqlplus as / sysdba but getting same errorThen you are not logged onto OS as same user (oracle?) that owns Oracle software directory.
If Windows the post results from command below
SET
If some flavor Unix post results from command below
env | sort
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version
Edited by: sb92075 on Dec 1, 2009 10:31 AM

Real-time 8.6 Remote panel connection exceeds max number of licenses- with no connections

I've been using the remote panel right along with no problems to connect to my Compact Fieldpoint. This morning I accidently opened the connection twice on the same computer and tripped the "Remote panel connection exceeds max number of licenses" error. Now it will not let me connect anymore from my computer. I've tried clearing cookies, cache and history in Internet Explorer and rebooting my computer. I've fired up the Remote Panel Connection Manager which shows no connections, and the NI License Information window does not show any connections which have been denied due to max # of clients being exceeded. Is there a way to reset this without having to reboot my RT controller? I'm running RT8.6 and LV 8.6 Full Dev System and understanding that it should come with 1 remote panel license.
Thanks
maat
LV2014

The boss wanted to see an updated feature, so I was forced to deploy a new version and reboot. Problem went away as I suspected it would.
I did manage to make the same mistake again this morning (launch the remote panel in 2 different MSIE windows) and after closing them both I could reconnect. Must be a glitch or a bug? It'd be interesting to see if anyone else has this problem. For now...solved, but it would be nice to see a way to fix this without rebooting.
Message Edited by maat on 10-22-2008 10:10 AM
maat
LV2014

Maximum Connections exceeds

i have a html page that contains 6 dynamically created URL's one of them is mentioned bellow
http://hercules.keells.lk:8000/sap/bw/BEx?sap-language=%20&bsplanguage=%20&cmd=ldoc&TEMPLATE_ID=ZL1TACH
The problem is everytime the page is loaded it creates 6 sessions (user connections) & after i refresh the page a few times.. it will give me the maximum connections exceeded error...
How can i use only one session (connection) for this page & display 6 web queries /??????

append the following to your URL
&STATELESS=X
where is this html page (which contains the 6 webtemplate) running from - is it a BSP application?
Regards
Raja

How to connect multiple databases

Hi all,
This is my situation , i need to set the max number of connections to one database , if the connection exceeds then i need to connect to another database , is there any way to solve it? please help me

Sounds like you want to write your own load balancer. Sweet!!
As was already stated, this would be best handled by clustering your database servers.
If it's not done at that level, what's the next best option? How are your users currently connecting to the database? Is it through a web server or from stand-alone clients? If it's a web server, the server should have some facility for creating datasources and pooling connections. If you are dead set on switching to a different database when the number of connections in the pool has been maxed out, then you might have to write your own singleton class to manage the connection pool(s).
If your users are connecting through stand-alone clients, you have to force the client applications to connect through a single server that controls the connections.
There's one major problem with switching databases...if a user saves some data there is no guarantee that they will connect to the same database when they want to read the data at some later point. Maybe if there is replication between the two databases in the cluster, they might be able to do that.
Edited by: user9221846 on Feb 11, 2011 8:04 AM
Edited by: user9221846 on Feb 11, 2011 8:05 AM

ORA-00020 error, max connections reached

I tried logging into TOAD from back-end but it started giving error like 'ORA-00020, maximum no of connections exceeded...'. What, are the steps we can take to counter this.
I hope, my question is clear.
Please, help in solving the doubt.
regards

hi,
thanks, for your answer. But, in init.ora, the entries are like:-
# Processes and Sessions
#processes=250
processes=300
Is, there a difference from this in the maximum sessions possible which is given by 'sessions' parameter as
SQL> connect /as sysdba
SQL> show parameters sessions
When, I give :-
select count(1) from v$session
it gives 460.
Can, you please clear the doubts in the scenario put as above.
regards

Couldn't   Create Managed Connection

Hi,
I have developed a webdynpro application using webservice.and it works fine in portal...
But whenever the connection exceeds its limit,It throws the following Exception
Couldn't create ManagedConnection with . {jco.client.passwd=**, jco.client.lang=EN, jco.client.sysnr=00, jco.client.client=800, jco.client.ashost=server, jco.client.user=user1, jco.client.type=A, jco.client.jra_conn=true}
Then we have to increase the maximum number of connection in Visual administrator..
Although we have already close the connection in Webservice,
The connection remains in the same state(open),and throws the above Error.
Is There any way to solve this?
Regards
Nandha.

Hi Nandhadevi
Ok. The first thing I would do is to move the following two lines of code outside the while loop:
interaction.close();
connection.close();
then I would also as a precaution put both the interaction and connection object to null.
interaction = null;
connection = null;
In reality I would put the code like this (see below) so that we always close the connection even if an exception is thrown.
InitialContext initialcontext = new InitialContext();
ConnectionFactory connectionfactory=(ConnectionFactory) initialcontext.lookup("java:comp/env/eis/SAPJRAFactory");
Connection connection = null;
Interaction interaction= null;
try
connection = connectionfactory.getConnection();
RecordFactory recordFactory=connectionfactory.getRecordFactory();
MappedRecord input = recordFactory.createMappedRecord("ZVP_BAPI_GETPLANT_DETAIL");
input.put("CO_CODE",cocode);
Interaction interaction=connection.createInteraction();
output=(MappedRecord)interaction.execute(null,input);
ResultSet rs=(ResultSet)output.get("OUTPUT");
while(rs.next())
plant = rs.getString("PLANT");
plantname = rs.getString("NAME");
ZVP_Bapi_Getplant_WSgandS gs= new ZVP_Bapi_Getplant_WSgandS();
gs.setPlant(plant);
gs.setPlantname(plantname);
results.add(gs);
catch( Exception e )
// Some logging
finally
if( interaction != null )
    interaction.close();
    interaction = null;
if( connection != null )
    connection.close();
    connection = null;
Regards
Göran
Edited by: Göran Westin on Feb 20, 2008 6:24 PM
Edited by: Göran Westin on Feb 20, 2008 6:25 PM

Connection number

Inquiry about the Connection item in First connection attribute.
1. Connection exceed than setting connection attribute value.
The attribute values is set as Connection=10. But, more than 1000 connections are able to connect (all same in Process, thread and ttisql).
By looking at the document, tt_ref.pdf, setting the number of maximum connection is indicated. If the system still operates even though it reach the maximum setting connection value, what is this maximum values for?
2. If the connection exceed than setting value, does it cause any problem? Or, any effect on the resources(cpu, memory etc…) ?
3. If connection attribute does not really limits the connection number, is there any other way to control connection number?
4. When connection attribute’s values is set as 234, connection is unable and gives a error code(925).
It’s occurred on Linux system and setting values of semaphore is 'kernel.sem = 250 32000 100 128'.
What brings this error?

There is often confusion around this parameter. It is really a performance optimisation parameter. It does not limit the number of connections but affects the mechanism by which connections wait for locks if they cannot acquire them immediately. The first 'n' connections (in Connections=n, default is 64) use an efficient semaphore based lock wait mechanism while connections beyond this number use a less efficient mechanism.
We would normally recommend that you set this value to a few more than the maximum humber of concurrent connections that you expect there to be. Note that if you do increase this beyond the default you may also need to increase the number of semaphores defined in the kernel as (each connection requires a semphore) otherwise you will get the error that you are seeing :-)
Regards,
Chris

Mapped drives do not open after connecting via Cisco VPN Client

I have an issue when I initially connect to my remote network, I cannot get to any mapped drive unless I wait a few minutes for the VPN connect to mature. To explain further, I have to wait 2-4 minutes after connecting to the VPN for me to actually connect to those drives.
The error that pops up is:
"An error occurred while reconnecting to DriveLetter: to \\Server\sharedDrive\ Microsoft WIndows Network: The network path was not found. This connection has not been restored.
Now, immediately after I connect, I am able to successfully ping the server that hosts those folder locations but for some reason I cannot get to the server via UNC/shared drives until I wait a few minutes after connecting.
Below is the list of error logs I get when attempting to connect to the mapped drives during those first few minutes of connectivity:
1 15:26:39.804 10/06/14 Sev=Warning/3 IKE/0xA300005F
Firewall, Sygate Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
3 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
4 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
5 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
6 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
7 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
8 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
9 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
10 15:28:17.188 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
11 15:28:17.188 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
12 15:33:50.642 10/06/14 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=192.168.11.120, error 0
13 15:33:51.656 10/06/14 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
14 15:35:16.855 10/06/14 Sev=Warning/3 IKE/0xA300005F
Firewall, Sygate Security Agent, is not running, the client will not send firewall information to concentrator.
Any ideas on what it could be?

I have a client that is showing a similar issue.. Windows 7 computer using Cisco IPSec client terminating on a Cisco 881 Router. I can ping the server by IP, Name and even access the drive from the start menu option, but not the mapped drive. Currently I am looking into this from a offline file issue in windows, but ran across this post and was wondering if you had figured this out? I am going to try the following and will post back if that resolves it.
Doing some research I found that Windows 7 and Vista both have what’s called “slow link mode”. The behavior is that if the latency of the network connection exceeds 80 milliseconds (ms), the system will transition the files to “offline mode”. The 80 ms value is configurable using a local group policy edit.
Open Group policy (start -> run -> gpedit.msc)
Expand “Computer Configuration”
Expand “Administrative Templates”
Expand “Network”
Click on “Offline Files”
Locate “Configure slow-link mode”
This policy can either be disabled or set to a higher value for slower connections.
https://www.conetrix.com/Blog/post/Fixing-Problem-With-Windows-7-Shared-Files-and-Mapped-Drives-Unavailable-Over-VPN.aspx

WLAN: Max connections?

Hi,
I seem to be getting an error sometimes when trying to connect via WLAN: -
Max connections exceeded...please try again. (something very similar)
What's all this about? There's plenty of connections available on my WLAN router and I'm only using one browser connection on the phone, so why should this happen?
Regards
Jules.

23-Jun-200608:36 AM
jdub wrote:
Hi,
I seem to be getting an error sometimes when trying to connect via WLAN: -
Max connections exceeded...please try again. (something very similar)
What's all this about? There's plenty of connections available on my WLAN router and I'm only using one browser connection on the phone, so why should this happen?
Regards
Jules.
I am experiencing the same problem on my N80 as described in the original post. I should also re-state that I only get the "Max. number of connections..." message when trying to connect to my wireless network. Other connection methods work just fine.
I might add this problem only started after and upgrading my firmware to the internet edition. I had connected fine for more than one half a year previous. No ther changes have been made. Any input is welcome.
Thanks!

View individual connections by IP on ASA using a MIB

I would like to see embryonic connections of some IP's but Id like to do this with SNMP and I´m looking for a MIB for this. I see the embryonic connections with the command "show local-host x.x.x.x" but Id like to do this with a MIB in SNMP.

Hello Kenneth,
I looked through various docs and here is what I found:
We can collect the statistics for total number of connections through the box, which is the output of "show connection count" using the following OID:
SNMP OID: .1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6
However, Ithere is no such OID which tracks the statistics you are looking for.
Here is the reference link for SNMP on ASA and the MIBs supported:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/monitor_snmp.html Per above document 8.4(1) onwards ASA supports connection-limit reached trap notifications, MIB's available on site.
Here is the link from where we can download the MIBs supported by ASA:
ftp://ftp-sj.cisco.com/pub/mibs/supportlists/asa/asa-supportlist.html
If you wish to be alerted when embryonic connection limit reaches, you can set email alerts to do that.
Whenever such limit exceeds, the firewall generates the following syslog:
Error Message %ASA-4-407002: Embryonic limit nconns/elimit for through connections
exceeded.outside_address/outside_port to global_address
(inside_address)/inside_port on interface interface_name
http://www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html#wp4773060
Setting email notifications such that whenever this sylog is generated, an email is sent across. Here is how we can do it: /----------------------------------Begin Output--------------------------------/ config t logging list test message 407002 logging mail test logging from-address [email protected] logging recipient-address [email protected] smtp-server /------------------------------------End Output--------------------------------/
HTH.
Sourav

Set peer maximum no 40 exceeded

Dear sir ,
on CISCO 2851 router i am unable to create new set peer connection below message shown on router
"Set peer connection exceeded maximum 40 "

Hi,
Did you change the settings in OAY2 to 0 indicator after the creation
of the asset in question ?
Could you check the following fields :
     ANLB-XGWGK for the asset
     ANKB-XGWGK for the asset class
Regards Bernhard

Error in displaying a iview in NW portal 7.0

500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Connect to message server host failed
Connect_PM TYPE=B MSHOST=merry.la.mindspeed GROUP=PUBLIC R3NAME=BWD MSSERV=sapmsBWD PCS=1
ERROR hostname 'merry.la.mindspeed' unknown
TIME Thu Nov 29 20:57:04 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -2
MODULE nixxhsl.cpp
LINE 223
DETAIL NiHsLGetNodeAddr: hostname cached as unknown
COUNTER 5
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=merry.la.mindspeed GROUP=PUBLIC R3NAME=BWD MSSERV=sapmsBWD PCS=1
ERROR hostname 'merry.la.mindspeed' unknown
TIME Thu Nov 29 20:57:04 2007
RELEASE 700
COMPONENT NI (network interface)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000013 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine IBM J9 VM - IBM Corporation - 2.3
Operating System AIX - ppc64 - 5.3
SP 13
This error is occurring.
I have another problem also.
max no of connections exceeded 100
when i check no of users and sessions its less than that but i face the problem.
when i restart the system it works fine for a week and the problem again comes
please suggest me
thanks in advance.

HI Chandra
maintain an entry in x:\windows\drivers\etc\hosts file
'merry.la.mindspeed'
Best Regards
Chaitanya.A

Connection Exceeds

Similar Messages

Maybe you are looking for