Connection problem with new database
Hi
Installed new database on my windows machine successfully
while connectting as sys user error
ORA-12500:TNS: listner failed to start dedicated server process
wlile connecting toad and sqlplus
Please read the error again "listner failed to start dedicated server process". Means what, listner listened your request to connect, it tried to hand-off the connect request but due to resources problem (lack of memory) it is not possible to start server process; i.e. presumably the server is very busy at that time. If you are not able to resolve the issue, please check the unwanted services and stop them in strat-run-services.msc.
More information can be found at below link too:
Re: ORA-12500
HTH
Girish Sharma
Similar Messages
-
Any wifi connection problems with new Macbook Pro 13" models?
I currently use a 15" Macbook Pro (about 3.5 years old) that has intermittent WiFi connection issues (intermittently loses signal). This seems to have been a very common problem with this laptop model. My kids, who use Macbooks, have no connection problems. In any case, I'd love to buy one of the new model 13-inch Macbook Pro's but hesitate because of my many issues with WiFi connectivity on my older Macbook Pro. Just wondering if anyone is experiencing connectivity problems with the new model?
I've never had Wifi connection problems with a Macbook and now with the 13" MacBook Pro I was flabergasted when I took my MacBook down the street to a coffee house with free WiFi. I went to connect to their WiFi and found my own WiFi connection listed. I thought this odd even though I was on the same block as my apartment, my apartment is six stories up. I connected to the Coffee Shop WiFi but it was really slow so I wondered if I could connect to my own home connection. I switched it over and lo-and behold I did connect! It was a good 300 feet away! I NEVER saw this with previously owned MacBooks including the black MacBook and the MacBook offered just before they moved the MacBook up to the Pro series.
So I'd say they have improved the WiFi nicely. -
Airport Extreme Connection problem with new MacBook
Help-
For the past 2 years, I have had no problems with my Airport Extreme. My MacBook Pro (2006), My wife's iBook G4 and two AirPort Express units used as remote speaker connections have been rock solid. Both iPhone and one iPod touch work like a charm.
I just got my wife a new MacBook and since it came in and was connected, my Air Port Extreme has been nothing but a problem, requiring a hard reset every couple of days. As long as that MacBook is not connected, everything is fine.
Anyone have any ideas? Only the MacBook is using 802.11n. It is so frustrating, that my wife want to use her old iBook so if this can't get fixed, the MacBook is going back to Apple.Welcome to the discussion area!
From your description, it sounds like the wireless communications between the AirPort Extreme and your wife's MacBook are picking up some sort of wireless interference from another source such as a cordless phone or another nearby security system.
I suggest that you try different channels for your wireless to see if you can find a setting with less interference. To do this, you would:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme and then click Manual Setup below
Click the Wireless tab below the row of icons
Look for the Radio Channel or Channel setting
You may need to hold down the option key as you click on the selection box to display all available choices.
Start at the highest channel and work your way down, or start at the lowest and work your way up.
Click Update at the lower right of the window to save your current setting and the AirPort Extreme will restart in 20-25 seconds.
It will take some time to find the optimum channel for your network, so proceed slowly and take a few notes as you go. -
Connect Problems with Oracle Database Express Edition 11g Release 2
Hello,
I am a student trying to install Oracle Database Express Edition 11g Release 2 and SQL Developer on my home system, Win7 64Bit, in order to practice some things I've learned from me DBA class and Developer classes.
Anyway, I have everything installed, but I am having difficulty connecting as SYS or SYSDBA in the 'Run SQL Command Line', I keep getting the ORA-01017: invalid username/password: logon denied.
However, If i select the 'Start Database' I get this:
C:\oraclexe\app\oracle\product\11.2.0\server\bin>
and I can type sqlplus / as sysdba and it starts up just fine and show user lists me as "SYS".
but if I go back to 'Run SQL Command Line' I still cannot connect as SYS or SYSDBA...I find this both confusing and frustrating. I don't know if I am in different instances or something like that, but I seem to be limited to connecting only as "SYSTEM". I need SYS because I want to practice creating datafiles, instances and things like that, but I seem to be lost.
Also, I am trying to create a new DB connection with SQL Developer and I can only us SYSTEM for my login which, if I understand correctly, will limit my privileges. Again When I try to sign in with SYS or SYSDBA I get error'd out. When I installed Ora11gDBExpress I was prompted in input a single password that was supposed to grant me access as SYS or SYSTEM, but I am limited to only SYSTEM for some reason.
So, I am looking for help/guidance as to what to do.
Thanks in advance for any and all help,
WarrenGeneral rule of thumb, don't use sysdba unless you want to shut down the database, or grant a database user privileges on a sys object.
A SYSTEM connection is not "limiting", it has the DBA role which means a user with a system connection can do most anything needed, including select/update/delete/drop any user's objects as well as change parameters in the instance.
The system user can indeed add datafiles, tablespaces, etc. The instance and database should already be created as long as the installer completed all its chores correctly. For XE, per the license agreement only one instance can run on one host. If you want to try creating a database, it will require shutting down the XE instance and creating a new database service, creating the database, and installing the system catalog and any other optional components desired. Good practice indeed, but a bit advanced for the new user.
Do create users for schemas ... connect system; create user <username> identified by <password> and connect <username> for the schemas (a collection of objects) within the database. Grant the resource and create session privilege to <username> to allow the database user the ability to create tables, indexes, stored procedures, etc.
There is no "or" in a sys as sysdba connection, from 10g onwards a sys connection requires using the sysdba privilege. To enable a sysdba connection, add your host user to the ORA_DBA group on the host. To verify the OS users in the ORA_DBA group, this might work for win7, in a cmd box ...
$ net localgroup ora_dba
...If your OS user is in the ora_dba group the sys as sysdba password is not relevant, you can in fact type anything for a password. If you wish to connect with the sysdba privilege from a remote client, that is a bit different and requires knowing the password set in the instance password file. Which should be set the same as the system password defined in the installer, but you can change that by creating a new password file. Another slightly advanced topic.
In Windows IMHO its better to leave the listener and database set to Manual start (in the services applet, Start/Run/services.msc) and start the listener, then the database, when its needed. At least for an XE instance, as its intended for practice and learning RDBMS management.
Edited by: clcarter on Mar 2, 2012 6:19 PM
fix typos -
Wi-Fi connection problems with new ipad4
Hi
I just bought a new iPad 4 and I am unable to connect to wi-fi unless I am right next to the router. I tried turning off and on the wifi, tried forgetting the network and reconnecting, tried resetting network connections, tried resetting all settings, tried software update, but the devise is up to date (IOS 6.1.3), but problem still not resolved. Can anyone help me, please.As much as I hate to see a brand new iPad have to be restored - have you tried that? Restoring the iOS Software?
iTunes: Restoring iOS software - Support - Apple
If you are having this many problems trying to stay connected to WiFi, and if the iPad is new, I would seriously consider returning the device to wherever you bought it. If you bought it from Apple, they have a 14 day refund policy. You can get your money back and try your luck with the purchase of another one. -
SSRS 2012, SQL Server 2012. Problem with changing database
Hi all!
I have a problem with changing database for SSRS.
I have a SSRS 2012 and SQL Server 2012. These programs is on WIndows Server 2012.
I need to link SSRS to the new database instance. For this I run SSRS Configeration Manager, open tab Database, click Change Database. Then I choose option "Choose an existing report server database", click Next, write the server name, test
connection (it's successed) and push Next again. Then I see this error message:
Error
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services.
OK
I'm confused, cause I have compatible versions of programs and THIS error.
Please, help me.
Thanks.Hi Kirill,
From the error message, we can know that the issue may be caused by incorrect editions of SQL Server for report data sources are used as the Report Server Database.
When creating a report server database, please be aware that not all editions of SQL Server can be used to host the database. So we should make sure that we have used the correct database as the
Report Server Database. For more details, please refer to the “Report Server Database Server Edition Requirements” section in the following document:
http://technet.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Problems with Sybase Database for Collection Manager in SCE2020
We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
[root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00 149559596 138280700 3681636 98% / /dev/sda1 101086 20685 75182 22% /boot none 1036624 0 1036624 0% /dev/shm
We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
Here is the info:
Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
[root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
[root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
Name % Data Free % Log Free
Database 55 99
[root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
/home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
/home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
[root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
Test: 01db_up.sh. Status: FAIL. Message: DB is not running
Test: 02cm_up.sh. Status: PASS. Message: CM is running
Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
Message was edited by: EMILIO MENCIATomo:
we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
This is the log of the CM. What can be the problem? Thanks tomo
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts during current sample period: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts since startup: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections during current sample period: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections since startup: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections during current sample period: 15.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections since startup: 18.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used during current sample period: 1.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used since startup: 3.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server Error: 1608, Severity: 18, State: 4
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server Error: 1608, Severity: 18, State: 4
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Error: 632, Severity: 20, State: 2
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Attempt to move memory with an incorrect length
of -794444483. Maximum allowed length is 16384.
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel SQL causing error : =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curdb = 4 tempdb = 2 pstat = 0x10000
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel lasterror = 632 preverror = 0 transtate = 3
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curcmd = 0 program =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel end of stack trace, spid 11, kpid 1755578479, suid 3
AFTER RESTART
ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Adaptive Server Enterprise (Small Business Edition)
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel Using config area from primary master device.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel Locking shared memory into physical memory.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel Internal run-time model set for Linux - Native
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using 1024 file descriptors.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Copyright 1987, 2007
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. All rights reserved.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Unpublished rights reserved under U.S. copyright laws.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel
Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel This software contains confidential and trade secret information of Sybase,
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Inc. Use, duplication or disclosure of the software and documentation by
Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel the U.S. Government is subject to restrictions set forth in a license
Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement between the Government and Sybase, Inc. or other written
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement specifying the Government's rights to use the software and any
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel applicable FAR provisions, for example, FAR 52.227-19.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Platform TCP network is forced to IPv4-only.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel ASE booted with TCP_NODELAY enabled.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel SSL Plus v5.0.4 security modules loaded successfully.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel Network and device connection limit is 1009.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Number of blocks left for proc headers: 12760.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Proc header memory allocated 2552 pages for each per engine cache
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Size of the 16K memory pool: 307200 Kb
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Memory allocated for the default data cache cachelet 1: 307200 Kb
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Virtual device 0 started using asynchronous i/o.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server Loaded default Unilib conversion handle.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel Worker Thread Manager is not enabled for use in ASE.
Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Unix interval timer enabled for sysclk interrupts.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel Begin processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Completed processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Encryption provider initialization succeeded on engine 0.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel engine 0, os pid 27618 online
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server No active traceflags
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel libomni1 - Component Integration Services: usin
g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server Opening Master Database ...
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server Loading ASE's default sort order and character set
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server Recovering database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server Started estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started REDO pass for database 'master'. The total number of log records to process is 13.
Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Completed REDO pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Recovery of database 'master' will undo incomplete nested top actions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Started recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server Completed recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server Started filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server Completed filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Started cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Completed cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server Checking external objects.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server Database 'master' is now online.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server The transaction log in the database 'master' will use I/O size of 16 Kb.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server Warning: ASE_HA has no valid license and therefore is not initialized.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server server name is 'pqbsyb1'
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server Activating disk 'sysprocsdev' of size 126976 KB.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Virtual device 1 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server Activating disk 'systemdbdev' of size 49152 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Virtual device 2 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server Activating disk 'apricot_data1' of size 35082660 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server Activating disk 'apricot_log1' of size 2980002 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server Activating disk 'tempdb_dev' of size 1048576 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Virtual device 5 started using asynchronous i/o.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server Recovering database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server Started estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Completed REDO pass for database 'sybsystemdb'.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Started recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server Completed recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server Started filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server Completed filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Started cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Completed cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Boot Count: 13
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server Checking external objects.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server Completed recovery checkpoint for database 'model'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server Started filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server Completed filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Started cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Completed cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server Checking external objects.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server The transaction log in the database 'model' will use I/O size of 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Database 'model' is now online.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server The logical pagesize of the server is 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server 0 dump conditions detected at boot time
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Clearing temp db
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server Database 'tempdb' is now online.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server Recovering database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server Started estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed REDO pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server Completed recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server Started filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server Completed filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Started cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Completed cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server Checking external objects.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server Database 'sybsystemprocs' is now online.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server The server will recover databases serially.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server Recovering database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server Started estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started REDO pass for database 'apricot'. The total number of log records to process is 846.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Redo pass of recovery has processed 2 committed and 138 aborted transactions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Completed REDO pass for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Recovery of database 'apricot' will undo incomplete nested top actions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Started recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server Completed recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server Started filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server Completed filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Started cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Completed cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server Checking external objects.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server The transaction log in the database 'apricot' will use I/O size of 16 Kb.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server Database 'apricot' is now online.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server Recovery complete.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default unicode sort order is 'binary'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default sort order is:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'bin_iso_1' (ID = 50)
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server on top of default character set:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'iso_1' (ID = 1).
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel Cannot send, host process disconnected: btl-sce-cm suid: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server Error: 1608, Severity: 18, State: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0) -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom ;) -
IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0
Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks -
Problem with restoring database from backupset
Hello,
I'm newie in working with RMAN and I have problem with restoring database from backup set in my testcase.
I've restored controlfile, but I couldn't restore database - it fails with:
RMAN-00571: =============================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =============================================
RMAN-03002: failure of restore command at 08/31/2006 12:06:47
ORA-01180: can not create datafile 1
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF'
List of backupsets from restored controlfile
(I restored controlfile by command: restore controlfile from 'C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP'; -- I have disabled controlfile autobackup, therefore I couldn't restore from autobackup);
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
I can successfully crosscheck backup sets (by command crosscheck backup), but I couldn't restore database.
Path C:\ORACLE\ORADATA\LOCA10G2\ exists and I have right privileges.
Output of command restore database validate:
RMAN> restore database validate;
Starting restore at 31-AUG-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
data file 1 will be created automatically during restore operation
data file 2 will be created automatically during restore operation
data file 3 will be created automatically during restore operation
data file 4 will be created automatically during restore operation
restore not done; all files readonly, offline, or already restored
Finished restore at 31-AUG-06
What's wrong?
Thanks
PaulHi,
I think, that everything seems to be OK.
Commands which I use to validation of existence backup:
RMAN> crosscheck backup;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP recid=36 stamp=599744172
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP recid=37 stamp=599744183
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP recid=38 stamp=599918805
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP recid=39 stamp=599918805
Crosschecked 4 objects
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
36 B F A DISK 29-AUG-06 1 1 NO 01_CTL
37 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
38 B A A DISK 29-AUG-06 1 1 NO TAG20060829T113804
39 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
RMAN> restore database validate;
Starting restore at 04-SEP-06
using channel ORA_DISK_1
data file 1 will be created automatically during restore operation
data file 2 will be created automatically during restore operation
data file 3 will be created automatically during restore operation
data file 4 will be created automatically during restore operation
restore not done; all files readonly, offline, or already restored
Finished restore at 04-SEP-06
Is something wrong? After crosscheck backup set with system datafile is AVAILABLE.
If i tried to test existence of backup pieces on disk and permissisons - everything is OK too:
C:\>dir C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\
Volume in drive C has no label.
Volume Serial Number is E003-9FC6
Directory of C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29
29.08.2006 11:38 <DIR> .
29.08.2006 11:38 <DIR> ..
29.08.2006 11:38 666 624 O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
29.08.2006 11:36 7 340 032 O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
29.08.2006 11:37 7 372 800 O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
29.08.2006 11:36 338 657 280 O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 File(s) 354 036 736 bytes
2 Dir(s) 56 865 202 176 bytes free
C:\>copy C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\ C:\ORACLE\ORADATA\LOCA10G2\
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 file(s) copied.
Thanks
Pavel -
Query regarding connecting dashboards with SQL DATABASE using WSDT
Hello Sir,
I am trying to connect dashboards with Sql database via WSDT, but i have encountered the same problem as described in your SAP community blog (SAP Web Service Design Tool: From web service creation to Xcelsius consumption).
when i tried connecting CR server with WSDT ,it still shows that total number of available licenses is 0.
What can be done to solve this issue.
for your detail reference, we are using CRS NUL version's 60 days Evaluation keys and same with Xcelsius Departmental edition.
I would really appreciate, if you revert back to my mail as soon as possibleWhich version of Crystal Reports are you using? The regular ReportDocument SDK probably isn't robust enough to handle this, unless you create a connection using that connection string at design-time which you don't change at runtime. You might be able to add those properties using the in-proc RAS SDK, though. This is available with CRXI R2 as of SP2, and CR2008.
-
Having connection problems with Mail after installing 10.9.4
I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi Friend's,
I am useing from6i and trying to connect it with 10g database but it is not connecting to server .
but when i am connecting it to 9i server it connect with it.
what is the problem plz give me the solution.
Praveenonly the latest versions of Oracle Forms 6i run against 10g DB's without problems.
patchset 17 and 18 of Forms 6i can be found in the metalink.oracle.com -
Problem with new version 4.3.2 apps not working " after update to the new version "
Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards
Maybe you are looking for
-
Since switching to Yosemite, I am unable to paste any information into calendar events, instead having to type out all info such as location, notes, etc. This is true both in daily view and weekly/monthly views as well. Help?
-
Production order creation control in the case of jumping quty in routing
Hi, i have a routing in which first operation i make one quantity . in the second operation it becomes 12 quantity.and third operation also it becomes 12 quantity. for operation 1 quantity 1 operation 2 quantity 12 operation 3 qu
-
Business Catalyst Technical Questions?
Hello All, I will be working with Business Catalyst soon because of its integration with other adobe programs. However before I move on I do have a few questions that I could not find an answers on. How many products/ rows can the catalog feature han
-
Exporting Workbook as Oracle Report in Disco 4i ?
Hi everybody, I saw a note telling that one of the differences between Discover 4i Plus and Discover 4.1 Desktop Edition was that 4i Plus cannot export his workbooks on Oracle*Report, as the 4.1 does. Is it right or wrong ?? Thanks a lot for the answ
-
I live in Knoxville, TN and recently went to Tampa, Fl for a short trip. My fascinate worked flawlessly while I was there. So my question is, does the cell towers have anything to do with the software issues on the phone? Like many others, I have exp