Connection to a tuxedo server from a remote client

How do we connect from a remote client to a Tuxedo server?
When we tried to build a workstation client using buildtuxedo 8.0,it is unable
to link "libnwi.lib" file.But there is no "libnwi.lib" file in the system
please resolve this error

subhash,
You should be able to build a workstation client using buildclient -w
{other options}
If this isn't woking, you should contact BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
subhash wrote:
How do we connect from a remote client to a Tuxedo server?
When we tried to build a workstation client using buildtuxedo 8.0,it is unable
to link "libnwi.lib" file.But there is no "libnwi.lib" file in the system
please resolve this error

Similar Messages

New install issue-unable to connect to DB server from a remote client.

Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.

user6391746 wrote:
Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.solution depends upon which ERROR is thrown.
Is COPY & PASTE broken for you?
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.

Problem while connecting to Oracle 9i server from Oracle8.1 client

Hi experts,
Could you please help in resolving the issue we are facing.
We are trying to connect from Oracle 8.1 client to Oracle 9.2 server and its giving error .This is on Linux environ ment.
FYI - we are getting errors when we changed the client as Oracle 8.1 instead of Oracle 9.2.
Pls suggest.
Thanks.

8i client can connect to the 9iR2 database, but beware wich client are you talking about, only 8.1.7 is compatible against 9iR2, even though you must be aware this is a no longer supported combination, which means in case you find a bug the only solution available is to upgrade the client version to 9iR2.
By the way, is there a real reason why you have to tie your client to 8i? Being 8i long ago dessuported.
~ Madrid.

Query a List of Open WMI connections on a server from a remote system

We are monitoring a specific windows service on a server using Sitescope remote monitoring. The sitescope system uses a WMI method to Check if the service on a specific server is up or not. Initially it works like a charm but over time the WMI connections from
sitescope time out and we have been told that Sitescope is not closing the WMI connection it opens gracefully and the open connections pile up.
I am looking for a way to list open WMI connections to a specific service and/or server from a remote system and a way to kill those connections via a scheduled PowerShell (or batch/perl) script. I was able to list specific classes by -list parameter
of the Get-WmiObject cmdlet
but am unable to determine which class will give me the information that I require and the method to kill those connections.

Sitescope is not closing the WMI connection it opens gracefully and the open connections pile up.
1. It's not clear what "not closing the WMI connection it opens gracefully" means. WMI is a management technology that uses DCOM to connect to remote computers. (Is it really a question about DCOM?)
2. It's not clear what specifically "open connections pile up" means and what problem(s) it causes.
3. This is really a support question for that software's developer, not a question about WMI.
-- Bill Stewart [Bill_Stewart]

How to connect to a Sql server from Oracle using db link

Hi All,
Does anybody have any idea about how to connect to a sql server from oracle database using db link to syncronize the data? I need to pull the data from Sql server table to Oracle tables and relay messages back to the sql server.
Thank you,
Praveen.

we have 2 products - DG4MSQL and DG4ODBC.
DG4ODBC is for free and requires a 3rd party ODBC driver and it can connect to any 3rd party database as long as you use a suitable ODBC driver
DG4MSQL is more powerfull as it is designed for MS SQL Server databases and it supports many functions it can directly map to SQL Server equivalents - it can also call remote procedures or participtae in distributed transactions. Please be aware DG4MSQL requires a license - it is not for free.
Check out Metalink and you'll find notes how to configure both products.
For a generic overview:
Note.233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases
And the setup notes:
DG4ODBC
Note.561033.1 How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) :
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit RDBMS.HS-3-2 :
Note.109730.1 How to setup generic connectivity (HSODBC) for 32 bit Windows (Windows NT, Windows 2000, Windows XP, Windows 2003) V817:
Note.466228.1 How to Setup DG4ODBC on Linux x86 32bit
DG4MSQL
Note.466267.1 How to Setup DG4MSQL (Database Gateway for MS SQL Server) on Windows 32bit
Note.562509.1 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX)
Note.437374.1 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11 on Linux

Connect the SAP B1 server to the Remote SAP B1 client

hi experts..
i want to know how to connect the SAP B1 server to the Remote SAP B1 client machine.

Hi Raleigh,
The reason why it is slow or hanging, is u need to upgrade the RAM in your Server. we have implemented the same concept and the speed is also good.
But we have done with one Single Server in the Office, which can be accessed both through Local LAN and via internet, for this we had given two IP Address for the Server.
One will be Public Static IP and the other is Local Static IP.
Hi raleigh,
I configured static ip with Nat mode in router.It was connecting from out side and while connecting it was asking Licence server ip,then i have given ip after that it was showing ths error"connection to the Licence server failed (60070-15)".Please help me.

Connect to Sybase SQL Anywhere from a remote location.

BH
Hi, we are running SQL Anywhere 16. Currently our client computers are connecting through ODBC. Is there a way to connect to our server from a Remote Location (over the internet)? If yes, how?
Thanks
Aron

Hi Aron,
Is there a way to connect to our server from a Remote Location (over the internet)?
Yes, there is.
If yes, how?
You will need to supply a HOSTNAME (or direct IP) and PORT to the server running the network database server, communicating over TCP (Note: This may involve opening a TCP port on your firewall to provide a direct TCP route). For the SQL Anywhere client, this information can be set in the ODBC DSN entry as the following screenshot shows:
Note that this is unencrypted traffic across TCP/IP, by default.
If this communication is over the Internet, using an unencrypted channel directly to the database is not recommended. Instead, we would recommend that you also configure Transport Layer Security (TLS) with strong encryption enabled using a certificate (either self-signed or provided by a Certificate Authority (CA)). To do this, you need to create the certificates and then start the SQL Anywhere database server with the (private) server-side identity certificate.
Once the database server is started, you will then need to configure the client for secure communication with the public certificate. When configuring Transport Layer Security on the ODBC client, the security settings (e.g. trusted_certificates, certificate_unit, certificate_company, certificate_name) can be entered on the "Network" tab:
Regards,
Jeff Albion
SAP Active Global Support

What ports need to be open to control Lion Server from a remote location (through Server.app)?

I need to control a Lion Server from a remote location and need to poke some holes in the firewall, unfortunately, I have no idea what ports those need to be. I can control the Server via the Server Admin application, but it will simply not connect via the Server.app.
Suggestions?
Thanks in advance.
Marius

Try in the Lion Server Forum?
Regards,
Colin R.

I need helping!!! configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.

I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#

Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389.

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

Connect to MS Sql Server from Java Source

Hi,
Is there any way I could connect to ms sql server from Java source? I know I can call java source from function thats easy but what I really want is capability to connect to non-oracle(MS SQL server) from my java source and then call it from function.
I don't know if JDBC driver for SQL server is even installed/available. Is there a way I could find it out form my IDE? I know sqlJ does compile but I have never used sqlj. help!!!
Sinha

You'll probably have better luck in a Java forum or a Microsoft forum.

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Connecting to a NT server from another server

Hello, All. I was wondering If anyone knew the best and more efficient way to connect to a NT server from another server. Once the connection is made I need to be able to execute .cmd file on the NT server.
Thanks
Donald

I doubt if there is a "best" way. Do you want to do this programatically or interactively?
Interactive methods include:
Run a terminal server on the NT box and telnet to it.
Run a webserver on the NT box and create some simple server side script to execute the .cmd
Programatically:
Create a simple server to listen on a port, recieve connections, and execute command that are passed. (This is signicantly more arduous than the interactive methods, especially if you want some user authentication).
Use RMI or CORBA

Connecting to network SQL Server from SQL Developer

Hi All,
I am trying to connect to network SQL Server from SQLDeveloper but I am unable to connect( I am getting could not connect to SQL Server...). I have searched many sites but could not find the solution. I am giving HostName as MachineName\InstanceName and keeping the port as 1433.
Can anyone explain how that connection string should be given.
Thanks.

From help with additional comments
Host Name: Host system for the Microsoft SQL Server or Sybase Adaptive Server database.
E.g., sybase.myCompany.org (DNS name or IP address)
Port: TCP/IP Port on which Microsoft SQL Server or Sybase Adaptive Server will listen.
As mentioned by others, need to know how server is configured. Common values: 1433, 5000
Retrieve Database: Name of the Microsoft SQL Server or Sybase Adaptive Server database.
Once the other data is correct, press this to populate list box and select which database you want associated with this connection. E.g., pixar, pubs2, etc.
Brian Jeffries
SQL Developer Team

Can't connect to my VPN server from the WAN addres...

I've setup a PPTP VPN server on a Raspberry Pi, so that I can connect to it when out and about and avoid having my android internet use sniffed by random public wi-fi hotspots.
It seems to be working as I setup a Windows 7 connection to it using the LAN address (192.168.1.85) and that connected fine but I can't get it to work through the BT HH3 via the WAN address. I've forwarded port 1723 to 192.168.1.85 and tried disabling the firewall, enabling port clamping and putting the RPi in the DMZ, none of which made any difference.
Is anyone able to help please?

Did some testing from my parents house yesterday and whilst connected to their router (Virgin Media) and/or a local BTWiFi hotspot (I can't honestly remember if I tried both or if I only tested with one or the other), I was able to connect to the VPN Server from my phone.
I can also connect from my home PC using Putty to the VPN Server on SSH (port 22) with that forwarded in the router using the WAN address, so NAT travesal doesn't seem to be an issue.
Yet I still can't connect to the VPN Server from home, whether connected to my HH3 or a local BTWiFI-with-FON hotspot, using the WAN address, only the LAN address, which doesn't make any sense to me.
I don't think it's relevant to this problem but I want to ask a question about the router firewall as the description for Default (which is what I have enabled) says "Allow all outgoing connections and block all unsolicited incoming traffic. Games and application sharing is allowed." but it doesn't appear to block unsolicited incoming traffic as otherwise I don't think I'd have been able to connect to the VPN Server from my parent's house, or on SSH from my PC using the WAN address. So is the description incorrect?

Connection to a tuxedo server from a remote client

Similar Messages

Maybe you are looking for