Consider costs when implementing SQL server cluster.
Hi,
I had this question on an interview and i would like to have your opinion.
When designing a cluster environment (Windows cluster i.c.m with SQL cluster). It is never Available/Available but Available/Not Available.
How can i work cost effective and use the unavailable node. So this machine doesn't do nothing. Without performance degredation?
Maybe use 2012 "Always on availability"?
Are there any other answers?
Kind regards,
Andre
Hi Andre
When designing a cluster environment (Windows cluster i.c.m with SQL cluster). It is never Available/Available but Available/Not Available
-- Not Like..You can use Active/Active if needed..
For example if you have two SQL Instance You can keep one Instances on each Node.
Normally Clustering is NOT Cost effective but good high availability solution with minimal down time.
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::
Similar Messages
-
How is the impact when a sql server cluster instance failover to a downlevel version node?
Hi,
I have a one instance two nodes sql 2012 cluster, node1's sql 2012 version is 11.0.5522, node2's sql 2012 version is 11.0.3000, node1 is active.
When sql server failover from node1 to node2, it succeed. I want to konw if this downlevel failover impact database (data or usage)?
Many thanks.I would not say this as a correct configuration although you can do it. Downside is suppose node 1 which is on higer version has some bug fixed with patch when you failover to lower version that bug might re surface. I have never used nodes with different
version nor i recommend.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Error message when installing SQL Server 2014 Express
When installing SQL Server 2014 Express,
I get the error shown below.
Why do I get this and how to correct for it?
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.MFC,version="8.0.50727.4027",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more
information. HRESULT: 0x80070422.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
ThanksHi,
here is the log file:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052081
Start time: 2015-04-14 10:25:00
End time: 2015-04-14 10:38:21
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for Browser: Use the following information to resolve the error, and then try the setup process again.
Next step for ComponentUpdate: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: BRENDA-PC-HOME
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: italiano (Italia)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Brenda\Downloads\SQLEXPRWT_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\SERVIZIO DI RETE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, CONN, BC, SDK, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Brenda-PC-Home\Brenda
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: true
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Setup Support Files
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SystemConfigurationCheck_Report.htm -
Implementing SQL Server Reporting Services with a Java EE Application
Hi All,
I need to find some tutorial on
"Implementing SQL Server Reporting Services with a Java EE Application"
for my j2EE application.
Until now i have searched a lot of sites but have not any thing related to this topic.
I am using apache axis along with SQL Server Report Manager for creating the sql server reports.
I have done upto :
Creating the webservice with the help of report manager.
Now i want to connect it through my j2EE application and want to retrieve some data from that web service.
I have got stuck on the following BOLD lines in my code .
code:
public CatalogItem[] getData(String res, String searchStr) throws RemoteException {
ReportingService2005Soap port = null;
ReportingService2005Locator loc = new ReportingService2005Locator();
// Retrieve a port from the service locator
try {
port = loc.getReportingService2005Soap(new java.net.URL(res));
} catch (MalformedURLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (ServiceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
org.apache.axis.client.Stub stub = (org.apache.axis.client.Stub) port;
stub.setUsername("localhost\\Administrator");
stub.setPassword("servWIN@2007");
// Retrieve a port from the service locator
SearchCondition condition = new SearchCondition();
condition.setCondition(ConditionEnum.Contains);
condition.setName("Name");
if (searchStr != null)
condition.setValue(searchStr);
else
condition.setValue("");
// Create an array of SearchConditions which will contain our single search condition
SearchCondition[] conditions;
conditions = new SearchCondition[1];
conditions[0] = condition;
// Call the Web service with the appropriate CatalogItem[] returnedItems;
CatalogItem[] returnedItems = null;
port.findItems("foldername",BooleanOperatorEnum.Or, conditions);
return returnedItems;
}i.e. while executing the findItems() method i got the following exception :
System.Web.Services.Protocols.SoapException: The item '/reportingservices' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/reportingservices' cannot be found.
at Microsoft.ReportingServices.Library.RSService.FindItems(String folder, String operation, SearchCondition[] properties)
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions, CatalogItem[]& Items)
Any any body has any idea please help me.
I need it urgently.
Regards.The above example is mentioned in msdn virtual lab that teaches how to connect to reporting services from a j2ee application.
I have done the same thing .. but i am not able to render the report programmatically .. if anybody knows pls let me know the solution. -
An error when registering SQL server driver
Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javajavac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha -
When installing SQL Server under feature selection you are given the option to change the Shared feature directories. When you choose to change from the default OS drive it seems that the installation
process still installs a large amount of files on the OS drive and then additional files under a similar drive structure on the alternative drive. Is there any real benefit to changing the default location?
Additional is there benefit to changing the default location for the installed features, database engine etc. We are trying to create some clean templates that we can bring up in our production
environment so we are provisioning separate drives for data, logs, backups, tempdbs but as we use the prepare image it seems like splitting the installation of sql server into two separate locations to safe minimally on file space seems counterproductive.
I have searched for best practices and this area seems glossed over in most articles, I found a few that indicate later installation of features on a machine that use a non-standard shared component
drive has caused issues. I would like to know there are benefits to taking such actions.
Thanks in advance,
DirkHello,
The best reason I can think about installing SQL Server binaries on another drive different than the system drive is the
fact the page file (pagefile.sys) is located on the system drive by default. The more I/O I can prevent happening on that drive the better for the performance of operating system.
SQL Server still installs some binaries on the system drive anyway, and creating a partition for SQL Server binaries alone
may seem like a waste.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error: "PackageFromTheweb" when install SQL Server 2000 cluster
Hi,
I am trying to setup a WAS 6.40 system. When I am installing SQL Server 2000 on cluster, I got following error: "This program is used internally by PackageFromTheWeb. It should not be executed directly." Our OS is Windows 2003 Enterprise SP2. Search on the internet many have the same problem but seems no answers. We even completed rebuild OS and install again got the same error message. Very frustration! Realizing the installation has NOT even get to SAP part yet, but any of you see this kind error message when you install SQL Server? How do you fix it?
Any helpful anwsers are appreciated and reward points.
Thanks,
Yujun Ran
Edited by: Yujun Ran on Mar 18, 2008 3:53 PMSuhas,
Not sure I understand what you are asking. But to answer your question, No, I did not install any software on my desktop. I am logon to the server remotely to install SQL Server 2000.
Thanks,
Yujun Ran -
Virtualised Multi-Instance SQL Server Cluster - Processor Resource Management
Hi - We're in the process of implementing a multi-instance SQL 2014 guest cluster on Windows 2012 R2. To our dismay, it seems that Windows System Resource Manager (WSRM) is deprecated in Windows 2012 R2, so we're now stuck for how best to manage CPU usage
between SQL instances....
As far as I can see, I'm left with two options, but both of these have problems:
1) Use SQL Processor affinity within the guest cluster, with each SQL instance assigned to dedicated v-CPU. However, I'm not certain that setting SQL Processor affinity within a VM will actually have the desired affect!?..
- When there is physical CPU capacity available, I'd hope Hyper-V would provide it to whichever v-CPU is demanding it.
- When VM processor demand exceeds the physical CPU capacity, I'd hope the SQL instances would receive a proportion of the physical CPU time according to the number of v-CPU(s) assigned through the affinity settings.
2) Use a VM (actually 2, because its a 2-node guest cluster) per SQL instance!.. This is not ideal, as we need multiple SQL instances and it would result in have an administrative and performance overhead
Does anyone have any information or thoughts on this? How can we manage a virtualised multi-instance SQL deployment now that WSRM has been deprecated? Help me please!I'm not sure what are the requirements for each of the 2 VMs in in the SQL guest cluster.
I'm assuming the guest cluster resides on a Hyper-V CSV with at least 2 Hyper-V hosts, and the 2 VMs are configured with Anti-affinity to ensure they never reside on the same Hyper-V host.
I've been able to configure CPU resources to VMs from the standard controls in Hyper-V Manager:
See this blog post
What edition of SQL 2014 you're using?
This matters because of these limitations.
Also consider running SQL Server with Hyper-V Dynamic Memory - see Best Practices
and Considerations
Hyper-V performance tuning - CPU
Hyper-V 2012 Best Practices
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx -
I am at my wits end. I've been developing on Windows for 20 years but have never run across something like this. On Windows 7 Pro I need to install the SQL Server 2014 demo (SQLServer2014-x64-ENU) with the SQL Server 2012 community data mgmt
package demo (SSDTBI_VS2012_x86_ENU) to develop my MSBI/SSIS skills. Somewhere along the line one of the prerequisite updates causes the Windows update process to quit working giving me and error code beginning with 8 (sorry didn't write it down, stupid)
that says I don't have permissions to update. Have not been able to isolate it farther than that. Have done all the fixes I've been able to find online and none of them have worked. For whatever reason, when I install the same thing under
VMware it's runs fine. I've had Microsoft log onto my machine and he told me I needed to buy a $99 piece of software to fix the problem. At this point I'm more than ready to do so.I am at my wits end. I've been developing on Windows for 20 years but have never run across something like this. On Windows 7 Pro I need to install the SQL Server 2014 demo (SQLServer2014-x64-ENU) with the SQL Server 2012 community data
mgmt package demo (SSDTBI_VS2012_x86_ENU) to develop my MSBI/SSIS skills. Somewhere along the line one of the prerequisite updates causes the Windows update process to quit working giving me and error code beginning with 8 (sorry didn't write it down,
stupid) that says I don't have permissions to update. Have not been able to isolate it farther than that. Have done all the fixes I've been able to find online and none of them have worked. For whatever reason, when I install the same thing
under VMware it's runs fine. I've had Microsoft log onto my machine and he told me I needed to buy a $99 piece of software to fix the problem. At this point I'm more than ready to do so.
>> I've had Microsoft log onto my machine and he told me I needed to buy a $99 piece of software to fix the problem.
I do not understand and never seen a log that tell you what to buy or what it cost.
according to your explanation I would probably try to restore to point in time before the first installation which star the problem. If you do not have a backup then it is a great lesson for life :-)
In this case:
Please provide us more information from the log file during the installation that stopped + the errors that you get in current attempt to install.
C:\Program Files\Microsoft SQL Server\<folder name according your installation>\MSSQL\Log
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
SCOM 2012 R2 installtion wizard not able to contact SQL server cluster
Hi,
This is about the error faced while installing SCOM 2012 R2.
My customer has SQL 2012 SP1 cluster installed. I am trying to install the SCOM 2012 R2 with this installed SQL cluster. The SQL cluster is installed with default instance and with AAG (Always on Availability Group).
The edition of SQL server is, SQL Server Enterprise edition with SP1
After check services on both the SQL nodes found that SQL Full text is not installed (as the related SQL Full text service not present in the services.msc) on any of the SQL cluster node & SQL Browser service is not running.
The running services for SQL are, SQL Server (MSSQLSERVER) & SQL Server Agent (MSSQLSERVER).
When I started to install the SCOM 2012 R2, Within a SCOM 2012 wizard, On the Configure the Operational Database screen, entered only the name of SQL cluster & no instance as it is with default instance MSSQLSERVER.
I faced error as, This SQL Server could not be found.
After installed SQL full text, the service is showing in services.msc as "SQL Full-text Filter Daemon Launcher (MSSQLSERVER)".
Now when I started to install the SCOM 2012 R2, Within a SCOM 2012 wizard, On the Configure the Operational Database screen, entered only the name of SQL cluster & no instance as it is with default instance MSSQLSERVER.
I faced error as, The installed version of SQL Server could not be verified or is not supported.
Followings test carried out for the connectivity between SCOM 2012 MS &SQL Cluster
Ping SQL Cluster successfully
Telnet SQL Cluster for port 1433 successfully
Tracert SQL Cluster – completed successfully with single hops.
The windows firewall is off on both sides
The SQL services running on the Active node 1 of the cluster are as follows:
SQL Full Text Filter Daemon Launcher (MSSQLSERVER) -- Running & Manual
SQL Server (MSSQLSERVER) -- Running & Automatic
SQL Server Agent (MSSQLSERVER) -- Running & Automatic
SQL serve Browser - Stopped & Manual
SQL Server VSS Writer -- Running & Automatic
The SQL services running on the Passive node 2 of the cluster are as follows:
SQL Full Text Filter Daemon Launcher (MSSQLSERVER) -- Running & Manual
SQL Server (MSSQLSERVER) -- Running & Automatic
SQL Server Agent (MSSQLSERVER) -- Stopped & Automatic
SQL serve Browser - Stopped & Manual
SQL Server VSS Writer -- Running & Automatic
The SQL Server Agent (MSSQLSERVER) service is not running on the second node. It is running only on first node which is active.
The account used to install SCOM has the local admin privilege on the SQL server
To ping the cluster use the cluster name & it solved the whole FQDN of cluster in ping result. When ping with IP address with -a it not resolve to name.
Is any one can provide their valuable inputs.
Regards,
SandeepKHi SandeepK,
Before Installing Operations Manager on an availability group, please
1. Make sure to use the Group listener Name and port when installing Operations Manager for the databases that are going to be added to the availability databases.
2. The first management server will use the Group listener to get the primary SQL instance, and will install the databases on that instance.
System Requirements: System Center 2012 R2 Operations Manager
http://technet.microsoft.com/en-us/library/dn249696.aspx#BKMK_ClusterConfig
Niki Han
TechNet Community Support -
Problem accessing sql server cluster node
Simple two node cluster configuration with SQL server 2014 and Windows Server 2012. When node 2 is active, remote client access to SQL server works fine through SQL Management Studio. However, when node 1 is active, remote client access will
not work. Node 1 was installed first, and node 2 was the added node when SQL server was installed. All other settings have been confirmed to be the same. Anyone have any ideas????
TIAHi TIA,
Did you try to disable all the node firewall and try again, any error information you got when it fail connect to SQL cluster?
Best Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Error Calculating InstanceID when installing SQL Server 2012 SP1 on Windows 7 Home Premium SP1
Hello...
I know this issue has been on several tickets but I have not been able to find a satisfactory solution. I am receiving error 0x85640001 "...error calculating instanceid" when I attempt to install SQL Server 2012 Developer Edition DVD.
I have downloaded the ISO for the enterprise evaluation product and tried burning it to a DVD-RW and decompressing the ISO to my desktop for installation without success.
The log files do state the setup process runs into a badimageformat exception.
I had SQL Server 2008 Developer edition installed on this laptop, but I have completely removed all prior SQL Server instances (using the uninstall wizard in Control Panel).
Please let me know what you suggest to correct this problem.
Thank you for your help!Hello,
1. Uninstall any SQL Server 2012 component using Control Panel.
2. Download the Evalaution Edition from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=29066
3.Perform an edition upgrade from evaluation edition to developer edition using the current media.
http://technet.microsoft.com/en-us/library/cc707783(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SSIS package is failing when using SQL server agent
I am trying to execute an SSIS package through an SQL server agent and receiving the following error:
Message
Executed as user: serv-syst\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 1:56:53 PM Error: 2014-04-21
13:56:54.81 Code: 0xC0202009 Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login failed for user 'hsnzha'.". End Error Error: 2014-04-21
13:56:54.82 Code: 0xC00291EC Source: Drop table(s) SQL Task 1 Execute SQL Task Description: Failed to acquire connection "DestinationConnectionOLEDB". Connection may not be configured
correctly or you may not have the right permissions on this connection. End Error Error: 2014-04-21 13:56:54.82 Code: 0xC0202009 Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login
failed for user 'hsnzha'.". End Error Error: 2014-04-21 13:56:54.82 Code: 0xC00291EC Source: Preparation SQL Task 1 Execute SQL Task Description: Failed to acquire connection
"DestinationConnectionOLEDB". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:56:53 PM
Finished: 1:56:54 PM Elapsed: 0.844 seconds. The package execution failed. The step failed.
My SSIS package retrieves a excel file and saves the vales into an SQL table. When I run the package by itself in my server it works fine but when it's called from a SQL agent, it fails with the above error. Please help me resolve it.That's the issue. If it's a SQL login the password cannot be retrieved by account executing the package from the job which is why login fails. In that case best thing would be set password in job properties or pass it using configuration created in the package
See
HTTP://blogs.msdn.com/b/runeetv/archive/2011/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
My package is saved with ServerStorage which appears under \\server\Stored Packages\MSDB\PACKAGE and when I run it, it works fine.
There is a new error message that I get now after following the steps from the link...
Message
Microsoft (R) SQL Server Execute Package Utility
Version 10.50.1600.1 for 32-bit
Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 3:34:22 PM
Error: 2014-04-21 15:34:23.82
Code: 0xC0202009
Source: PACKAGEWMG Connection manager "SourceConnectionExcel"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Office Access Database Engine" Hresult: 0x80004005 Description: "Unexpected error from external database driver (????????).".
End Error
Error: 2014-04-21 15:34:23.82
Code: 0xC020801C
Source: Data Flow Task 1 Source - 'Contact Center$' [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2014-04-21 15:34:23.82
Code: 0xC0047017
Source: Data Flow Task 1 SSIS.Pipeline
Description: component "Source - 'Contact Center$'" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2014-04-21 15:34:23.82
Code: 0xC004700C
Source: Data Flow Task 1 SSIS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2014-04-21 15:34:23.82
Code: 0xC0024107
Source: Data Flow Task 1
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:34:22 PM
Finished: 3:34:23 PM
Elapsed: 1.25 seconds -
Error received when installing SQL Server 2008 R2 Express
I receive the following error when I try to install SQL Server 2008 R2 Express-
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\rhaas\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory..ctor(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
--- End of inner exception stack trace ---
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
at System.Configuration.ConfigurationManager.GetSection(String sectionName)
at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
at System.Configuration.SettingsBase.get_Item(String propertyName)
at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement()
at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
LandingPage
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/LandingPage.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Microsoft.SqlServer.Configuration.Sco
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Configuration.Sco.DLL
Microsoft.SqlServer.Chainer.Infrastructure
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Microsoft.SqlServer.Management.Controls
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Management.Controls.DLL
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Does anyone have any ideas on how to proceed? Installing will not complete.Hi Balmukund!
Thanks for your help. I did rename both folders to a generic name (rename_folder_1 & rename_folder_2) and the install failed again. Did I rename the folders in a correct manner? Below is a copy of the user.config file referenced in
your post above. Any additional direction would be very helpful.
Thanks!
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
allowExeDefinition="MachineToLocalUser" requirePermission="false" />
</sectionGroup>
</configSections>
<userSettings>
<Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
<setting name="WindowPlacement" serializeAs="Xml">
<value>
<WINDOWPLACEMENT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<showCmd>3</showCmd>
<ptMinPosition>
<x>-1</x>
<y>-1</y>
</ptMinPosition>
<ptMaxPosition>
<x>-1</x>
<y>-1</y>
</ptMaxPosition>
<rcNormalPosition>
<left>0</left>
<top>0</top>
<right>800</right>
<bottom>600</bottom>
</rcNormalPosition>
</WINDOWPLACEMENT>
</value>
</setting>
</Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
</userSettings>
</configuration> -
Error when installing SQL Server 2008 R2 after downloading
Hi -I hope somebody can help me.
I have tried to install nopCommerce with no luck. I am not able to establish the SQL database. I have tried to solve the problem for a very long time, also with no luck. Now I think it has to do with an error that come when I installed the SQL Server 2008
R2.
I have tried to load a picture here, but was denied.
with hopes for help
Regards Egil Ryengen
The error text is as followed:
Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.coUnhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co
Did you read hardware and software requirements before installing SQL Server 2008 R2. I guess you are missing .Net framework. AS per
This Doc
You need to download and install .Net framework 3.5 SP1 and requirement is more if you are installing express edition. Its all mentioned in link
You can also refer to
this Thread it has same issue as you are having
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Maybe you are looking for
-
Hi, Please give some solution on the below situation. 1. PO is created with condition (Header) "Handling Value" equal to 150 in pricing elements. 2. GR is created with account postings including this 150 amount. 3. IR is created. But here we didn't
-
ITunes cannot sync iPhotos to the Apple TV
An hour ago, my iMac had no problem syncing my photos from iPhoto to my TV. Now I just got this error message: "iTunes cannot sync iPhotos to the Apple TV 'Apple TV' because your iPhoto Library could not be found. Open iPhoto to create or update your
-
Running BPEL in Sun Java System Application Server 9(Glassfish)
Dear Members I am using Glassfish as my application server for my webservices project, for services orchestration i planed to go for active BPEL Engine whis is developed by Active Endpoints, it an opensource, I need to know that can i run ActiveBPEL
-
Risk Analysis Button Grayed Out
Hello All, we upgraded to SP15 on GRC10.0 and Run Risk Analysis button is grayed out while trying to look at risk violations for chnage request approval. Any ideas? It was working previously.
-
How to change in technical name
Hi BW friends I have created a process chain on a DSO and i have named it as xyz,but the requirement is to name the chain as xyz daily.is there any process of changing the technical name? Thank You.