Consuming a WebDynpro application in VC

Hi Experts,
I have developed an application in Web Dynpro and it is running successfully.
Now I want to send the input of this WebDynpro application to VC application to display the summary as the last screen.
Please let me know, how to send the input from the webdynpro application to VC application.
Whether this can be done, if yes, please let me know.
Kindly help me.
Thanks,
Regards,
Palani

Hi Palani,
Basically, Guided Procedures (GP) can help you model business processes in which you connect various back-end applications and services into a single workflow. In addition, multiple contributors may be involved in completing the process.
GP can use a few different callable objects, such as WD and VC for example. Each step in GP envolves one callable object, in your case there should be one GP step that uses WD as it's callable object and another step following this one that uses VC as it's callable object. As for using VC as a callable object of GP, I can tell you that the VC model must include a Start-Point connector and an End-Point connector (else GP will not work with the model). As for using WD as a callable object you will have to ask in the WD forum or GP forum or Composition Environment forum.
A detailed inromation about using Guided Procedures (GP) can be found in the SAP CE NetWeaver Library, under this link: http://help.sap.com/saphelp_nwce10/helpdata/en/fb/5e6f4169e25858e10000000a1550b0/frameset.htm
I hope it helps,
If you encounter difficulties while creating the GP feel free to ask.
Regards
Yogev

Similar Messages

WebDynpro Application issue consuming asynchronous webservice from SAP PI

Hello experts i ask you for help thie following issue:
i am developing a webdynpro application which is supposed to
send some data from inputfields, and a file, in order to achieve it, that dynpro application is consuming an asyncrhronous webservice , this service is running in SAP Process integration .it uses only a component.
Iam having serious problems at mapping the asynchronous PI web service model -->to -->controller >and then to->view
since when i deploy the application into the SAP portal´s application server, it runs , but inputfields cannot be written.i dont mean unabled, what i mean, is. cannot write anything on them.ECXEPT the file upload UI element.
I have reviewed sap help page, 3 sappress books, about dynpro, and the procedure i am performind is agree with them.
endpoint test answers the folloiwng:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_20_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
what i did is the same as before(in another projects weh i used to import rfc models):
1.- import webservice model,and add it to component
2.-map web service model to controller context
3.-map controller´s context to view context
4.-create actions and methods
5.-binding context controller to ui elements
Dear experts, my questions are:
What am i doing wrong?
should i permorm another steps because the web service is in another application server (SAP PI)?
Should i create a stand alone proxy and then access it from webdynpro?
when i call the web service model excution it seems does not run, neverthless the invocation does not have any syntax error , what coul it be?
Thanx in advance!!

just for the sake of other who may hit this thread , the solution is to add sap-client=<clientno> in the url for wsdl

Consuming web service in ABAP webdynpro application

Hi
I have created a webservice to RFC scenarion in XI. I have the URl
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel in this format with me.
now i want to create an ABAP webdynpro application and call this webservice. for example the application contains some input fields and clicking on submit button will call the webservice and result is diaplyed in the same window. How can we do this??
thanks
sankar

See this
/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Regards,
Prateek

How to consume UME API in webdynpro applications

Hi ,
i want to consume the portal services in webdynpro applications.
here i want to use UME Service .
how to consume it my WD applications .
isit the same way as described in the below link : [http://help.sap.com/saphelp_nw70/helpdata/en/d2/0357425e060d53e10000000a155106/content.htm]
Regards,
Govindu

Yep, the http://help.sap.com/saphelp_nw70/helpdata/en/d2/0357425e060d53e10000000a155106/content.htm shows how to establish a reference to a portal service in order to consume it in your application. But it works only if you have the API of the portal service you want to reference.
BR, Siarhei

Calling servlet in a webdynpro application

Hi,
I have created a servlet for Authentication , and i have to call this servlet in the webdynpro application(on accessing a link)
Such that it will automatically take care if authentocation
Servlet is residing in a Java application and the View is residing in WebDynpro application
when i call the servlet i have to pass two parameters 1)URL and 2)Filename
Could anyone please help me out in doing this?
Thanks & Regards
Swetha

Hi Anagha,
Thank you for the information, i would like share my vague idea on resolving this.....please let me know will it be a possible approach
Here ew have two projects
1)WebProject(War file)
2)EarProject(where webproject is integrated
Steps
1)Get the EAR file
2)Create a portal application
3)Consume the EAR in the Portal application(by passing parameters)
4)Create a WebDynpro DC
5)Here call the portal Application( URL and URL parameters)
6)Get the URL
7)Finally we can call the servlet
Will these steps help in solving this issue
Thanks & Regards
Swetha

How to redirect to portal iview from a stand alone webdynpro application

Hello,
I need to able to navigate from a standalone webdynpro application, for which I do not want to create Portal iview, to a Portal iview with some data.
Please let me know how can I pass the string value and how to navigate.
Thanks,
Vinit

Vinit,
You're walking in circles. There is no magic answer to this problem. Web Dynpro is not an application of communication / interface with other applications, but a presentation layer for the user.
To perform this procedure interaction (simulating an ajax) you will need to use a middleware interface (CAF, EJBs, or any other technology that communicates directly with the Web Dynpro), or use the version 7.2 of Web Dynpro (maybe that solves their problems).
If only the external page you need to open did not have the user interaction (just loading and returning information) you could consume it like a WebService.
without more,
Angelo

To get login details of portal into webdynpro application

Hi All,
How to get the portal login details(user name) into my webdynpro application.
Thank you,
Harsha P.

Hi,
If you want to have portal login details from backend system (with ABAP) you should ask this question in some portal forum and ask if it is possible. This has nothing to do with workflow or UWL. Even if you get the portal user ID to the backend system, then what? Do you want to manipulate the portal roles etc. from your ABAP WD application? Then you will have even more complicated requirements to achieve with ABAP. It is not that straightforward to call different portal functionalities from backend system. You might need to do some "portal development". And eventually your ABAP WD application might come just an unnecessary wrapper component for calling some web services or whatever in portal.
Regards,
Karri

Needs a background webdynpro application running at the server side

Hi All,
We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
We are thinking of a webdynpro java application.
Can anyone suggest what kind of application needs to be implemented here?
And what would be the steps required to run the application at the server side without calling the application.
Thanks & Regards,
Anurag

Hi Robin,
Thanks for the detailed explaination.
This may sound silly to you but I've another doubt which is as follows:
As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be achieved by our web service.
Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
But in that case, we do not want any response to be sent by the Web Service to the external web application.
Please suggest if this is possible.
Once again, many thanks for the help so far.
Thanks & Regards,
Anurag

SSO b/w portal and webdynpro application customized login??

Hi,
I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
How to do the same without touching webdypro application ?
Can we call a method of webdynpro application from portal?
Regards
Deepak

1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
Add parameter to the application while defining the iview.Give some constant value.
Check value of this parameter in webdynpro and fire to next view.

How To Get GP Process Parameters in a Webdynpro Application runtime

Hi ,
Iu2019 ll hope you can help me to solve my problem with GP process.
Iu2019 m trying to get GP process parameters from a Webdynpro application.
I have to get parameters during the process runtime in every step of the process using
a webdynpro application with the following code:
      IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
      try {
            IGPProcessInstance processInst = rtm.getProcessInstance(processId,userContext);
            IGPProcessInstanceInfo procInfo = rtm.getProcessInstanceInformation(processInst.getID(),
userContext.getSAPUser());
            IGPStructureInfo inputstructInfo = processInst.getTemplate().getInputParameters();
            IGPStructure inputparams = GPStructureFactory.getStructure(inputstructInfo);
      } catch (GPEngineException e) {
            // TODO Auto-generated catch block
//          e.printStackTrace();
            manager.reportException("GPEngineException:"+getStackTrace(e), false);
      } catch (GPInvocationException e) {
            // TODO Auto-generated catch block
//          e.printStackTrace();
            manager.reportException("GPInvocationException:"+getStackTrace(e), false);
But printing the values of attributes with u201Cinputparams.getAttributeAs... ("param name")u201C the value returned is always 0. On the contrary if I check the same parameters structure in the runtime
GP view of the portal, the values are those that I have set in the start process wizard.
Have you a solution for this question?
Thanks in advance
Luca

hi Abhimanyu
I believe originally access to session was deliberately not made available inside WDA.
Growing security concerns due to misuse of session information and
perhaps other reasons as well.
X.509 is considered a better approach.
This may not help you in your problem.
But you may see a trend in WDA pushing more robust and client independent
approaches.
Full x.509 access should remove the need for session fiddling.
Also when developers access such session info directly, there is a possiblity
when they dont understand the technology exactly that they create a security hole.
You may know how to do safely, it is however discouraged.
Im not aware of a way to get at the session info inside the WDA framework.
Well not without a mod to the framework.
It may be possible without a mod, but I dont know the trick.
If someone has a little trick... please post.
You may need to use BSP, if your only solution requires access to the session info.
regards
Phil

Database connection in a WebDynpro Application - urgent

Hi
I am facing a problem with database connection. I am trying to develop a normal webdynpro application.
I want to retrieve data from a table and show it.
But my query is not giving the expected output. It is not even raising errors.
Please give me an answer
Thanks & regards
Aparnna

Connection con=null;
Statement st=null;
ResultSet rs=null;
public void wdDoInit()
    //@@begin wdDoInit()
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:erdsn","root","enteg123");
st=con.createStatement();
    catch(Exception e){
    //@@end
public void onActiononClickLogin(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiononClickLogin(ServerEvent)
     String desig=null;
try{
rs = st.executeQuery("select * from Login where Empid like uid and Pword like pw");
    if(rs.next()){
           desig=rs.getString("Designation");
     wdComponentAPI.getComponent().getMessageManager().reportSuccess(desig);
    if(desig.equalsIgnoreCase("Employee")){
          wdThis.wdFirePlugEmpOutPlug();
     else
     wdComponentAPI.getComponent().getMessageManager().reportWarning("Invalid input!");
      }catch(Exception e){

Need help in developing a webdynpro application using UWL API

Hi developers,
Iam developing a new WebDynpro application for UWL using UWL API.the functionality is to dispaly the summary of UWL like number of unread items, total items.
Iam getting the problem while deploying the application, iam getting warning while deployed the application.
I have given all possible ways mentioned in the below forum link
Re: Accessing PortalRuntime at runtime?
The exact problem is coming at reference file.
Please giude me how to move forward.
1. Below is the error when given "tckmcbc.uwl~api" in the service entry
deployed with warning :
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application local/UWLCountDemo for startup. Reason=Clusterwide exception: Failed to start dependent service ''tckmcbc.uwl~api'' of application ''local/UWLCountDemo''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
2.Below is the error when i gave PORTAL:sap.com/tckmcbc.uwl~api in the sharing refernce entry
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/UWLCountDemo cannot be started. Reason: it has hard reference to resource tckmcbc.uwl~api with type application, which is not active on the server.
Thanks in Advance
Sekhar.
Edited by: sekhar c on Mar 21, 2009 11:24 AM

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Single Webdynpro Application with multiple JCO Connection ?

Hi Experts,
I have a strange requirement ......
We have a Webdynpro Application which is connected to
say (using JCO connection)
client:- A
now i want to connect the same Webdynpro application to
Client:- B which is again in the same server as the client A.
Please help me how to handle this.
how it possible to connect a single Webdynpro application to two different clients using JCO Connection.
Please help.
Points would be rewarded to helpful answers.
Regards,
Sanjyoti.

Hi experts
                    We have to use wd application for both client at a same time e.g. as follow
Client A -
> Travel app--->Featches data from A for   employee hired in client A ,in same server as B
Client B -
> Travel app--->Featches data from B for   employee hired in client B , in same server as A
we are using same EP for both client but using diffrent roles for employees of both client.
Please reply asap.

Storing the output of BAPI for further use in Webdynpro application

Hi,
In my webdynpro application, a BAPI_A is called multiple times from a backend.
All the previous outputs of the BAPI_A need to be stored in the webdynpro application as they serve as a complete set of input parameters for BAPI_B at the end.
Can anybody shed light on this temporary storage mechanism of the outputs of the BAPI_A.
Regards
Meesum

Hi Meesum,
Your BAPI structure
BAPI_A
--Output (0..n)
Field1
Field2
Field3
Field4
Value node structure
vnBAPI_A (0..n)
--vnResult (0..n)
vaField1
vaField2
vaField3
vaField4
1. Declare objVnBAPI_A (between begin and end)
2. Initialize in the vnBAPI_A in the wdDoInit()
3. After each execution of the BAPI (BAPI_A), create the vnResult and populate the fields of vnResult (from the BAPI_A --> output)
4. Add the vnResult object to objVnBAPI_A
Hope this should help you.
Regards,
Santhosh.C

Calling a Webdynpro Application in using WDURLGenerator.getApplicationURL

Hi,
I have to call a webdynpro application in an external window using the application name. Please note that no iViews are created out of the application which i am going to call.
I have DC1 and DC2 and from the Comp Controlller of DC1 , i need to invoke the application in DC2.
String depObjectName =wdComponentAPI.getDeployableObjectPart().getDeployableObjectName();
WDDeployableObjectPart depObjectpart=WDDeployableObject.getDeployableObjectPart(depObjectName,"TestApp",WDDeployableObjectPartType.APPLICATION);
String url = WDURLGenerator.getApplicationURL(depObjectpart) ;
window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(url,"Test View");
window.show();
Is this the correct API to get getDeployableObjectName which is in the different DC.
Please let me know the correct API which i can use to get the getDeployableObjectName and the subsequently the Application which is availbale in the different DC.
Thanks and Regards,
Sekar

Hi Chintan Virani,
Thanks for your reply.
Is it possible to get to know through the APis that the Webdynpro Application Deployed in the server is started.
I hope some API's will be available.I need to open this application only when it is started.
I tried this,
IWDDeployableObject deplObj = WDDeployableObject.getDeployableObject("TestApp");
if ( deplObj.getState() == WDDeployableObjectState.STARTED ) {
// do something
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object TestApp' since it is not a Web Dynpro object. null
Thanks and Regards,
Sekar

Consuming a WebDynpro application in VC

Similar Messages

Maybe you are looking for