Content Browser (0BCT_CB_1) load fails with conversation id not found error

Hi,
I am suddenly experiencing a problem with loading data to the content browser cube using infosource 0BCT_CB_1. The load fails with an error saying: "Conversation 76635612 not found / CPIC-CALL: 'ThSA". Does anybody know how to solve this?

Hi,
Were you able to get this fixed?
I am getting same issue while loading to BI 7.0 technical content.
Thanks
SA

Similar Messages

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

ISE upgrade failing with "% Manifest file not found in the bundle"

Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version      : 1.0.3.377
Build Date   : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
Saro

Same problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version      : 1.1.1.268
Build Date   : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version      : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version      : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version      : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version      : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz

Stand alone APEX listener install fails with timezone region not found

Hi,
I have searched the forum but found only a thread for the installation with Goldfish.
I am very new to all this so I apologise if my problem is too simple, but please help as I am very frustrated with it.
I have a 10.2.0.4 database on Windows XP for testing with.
I installed APEX into it successfully, then down loaded the listener.
I have to Java installations, one under my Oracle Home, the other under Middleware where I have JDeveloper installed.
If I try $ORACLE_HOME/jdk/bin/java -jar apex.war it throws a Unsupported class version so I tried with the Middleware jdk and it appeared to install.
I then went to http://localhost:8080/apex/listenerConfigure and entered the password for APEX_PUBLIC_USER and the info for a basic connection, it fails with the following message
Request could not be processed due to error:
Sat Apr 30 00:06:30 CAT 2011
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
Please if anyone can help me through asap this I would be most grateful

Yay, I found the solution:
I started by running:
begin
for v_rec in (select tzname,tz_offset(tzname) v_offset from v$timezone_names
where tzabbrev='CAT') loop
dbms_output.put_line('tzname '||v_rec.tzname||', offset '|| v_rec.v_offset);
end loop;
end;
SQL> /
tzname Africa/Khartoum, offset +03:00
tzname Africa/Windhoek, offset +01:00
tzname America/Anchorage, offset -08:00
tzname US/Alaska, offset -08:00
PL/SQL procedure successfully completed.
I then added -Duser.timezone="+01:00" before the apex.war ie
java –jar -Duser.timezone="+01:00" apex.war

I deployed my .ear......Class loader failed...classs not found exception

Hi,
i deployed my application in Oracle 10g appserver....it shows the following exception
[Sep 15, 2006 12:48:22 PM] [SWDMS.192.168.20.108] Application Deployer for swdms STARTS.
[Sep 15, 2006 12:48:22 PM] [SWDMS.192.168.20.108] Copy the archive to C:\product\10.1.3\OracleAS_1\j2ee\home\applications\swdms.ear
[Sep 15, 2006 12:48:22 PM] [SWDMS.192.168.20.108] Initialize C:\product\10.1.3\OracleAS_1\j2ee\home\applications\swdms.ear begins...
[Sep 15, 2006 12:48:22 PM] [SWDMS.192.168.20.108] Unpacking swdms.ear
[Sep 15, 2006 12:48:24 PM] [SWDMS.192.168.20.108] Done unpacking swdms.ear
[Sep 15, 2006 12:48:24 PM] [SWDMS.192.168.20.108] Unpacking swdmsWARrel1_0.war
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Done unpacking swdmsWARrel1_0.war
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Initialize C:\product\10.1.3\OracleAS_1\j2ee\home\applications\swdms.ear ends...
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Starting application : swdms
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Initializing ClassLoader(s)
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Initializing EJB container
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Loading connector(s)
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Starting up resource adapters
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Processing EJB module: swdmsEJBrel1_0.jar
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] application : swdms is in failed state
[Sep 15, 2006 12:48:26 PM] [SWDMS.192.168.20.108] Operation failed with error: Missing class: com.ats.swdms.common.ejb.ClientEJBBean Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor Loader: oc4j:10.1.3 Code-Source: /C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\home\oc4j.jar This load was initiated at swdms.root:0.0.0 using the Class.forName() method. The missing class is not available from any code-source or loader in the system.
Can any one help me?
regards,
Shunmuag.

Hi,
Just check you registery to find out the parameter in your path.
Cheers,
Hamdy

Failing Connecting PHP to MySQL with HTTP 404 NOT FOUND Error

I'm using Dreamweaver CC to connect php to mySQL, and read both of these articles but still not working!
1. It keep showing me HTTP 404 NOT FOUND. But I can access MySQL by web browser so I'm sure the address and login info is correct.
2. There is no MMHTTPDB.php in my project folder.
MMHTTPDB.php not creating
http://forums.adobe.com/thread/1238828?tstart=0
MySQL connection
http://forums.adobe.com/thread/1239068?tstart=0
Did I miss something?

Thanks anyway but it is same as the thread I post below and above.
MySQL connection

VCS-E unable to make outgoing call with search rule not found error

Hi
I deploy telepresence device registered to CUCM and connect with VCS-C and VCS-E. The issue now is I am not able to make outgoing call and my search rule show not found, request time out.
I use DNS zone to make the outgoing call and my VCS-E is able to resolve DNS SRV record. However search rule result show not found.
Any advise are appreciated.

Hi
I managed to make a call to address that I am trying to reach. But it supposed to come up with PIN number to enter instead I saw the message that no incoming video.
Can you please advise what could be the issue.
tvcs: Event="Call Connected" Service="SIP" Src-ip="10.84.83.101" Src-port="27224" Src-alias-type="SIP" Src-alias="sip:[email protected]" Dst-alias-type="SIP" Dst-alias="sip:[email protected]" Call-serial-number="24a63c27-42b4-4950-ba02-6a548b279a09" Tag="f060faef-441f-47a2-9c75-e1b0623b5e14" Protocol="TCP" Call-routed="YES" Level="1" UTCTime="2015-02-25 14:38:32,604"

Request failed with SID value not found

Hi Gurus, I have this error message "No SID found for value '15.00' of charateristic 0CURKEY_TC" and similar message with "10.00" and "*0.0" value, when trying to activate data in standard DSO in BI7.0.
This is a Dev system just setup for traning purposes so I do not have any Master data to load. I am only loading transactional data from DataSource 0PU_IS_PS_32
I tried searching for the answer and did the following
1) Transfer Global Settings from the source system (which solved other problems but not this one)
2) In RSRV, I do not see any errors for this InfoObject
3) I am not sure how I can update table T006 and or TCURC with these values?
I also tried following the Note: 619987 and does not know how I can implement this function module "If you nevertheless receive this error message for the initial value, this means that there is an inconsistency in the SID table for the 0UNIT or 0CURRENCY characteristic. You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY"
Is there any help that anybody can extend, it will be greatly appreciated.

Dear,
SID error comes during activation of ODS because the related MD is not available for assigning SIDs.
So as a first step ensure that the related master data is loaded and Attribute change run has been triggered.
Or Load the MD and Activate the MD (Modeling > InfoObject > Search the Infoobject > Right click > Activate Master Data)
Once you perform this you can retrigger the activation. It should work fine.
Else as a workaround you can blank out these particular values and activate.
There is also one more workaround wherein you can create the Master data entries directly in BW itself. But both the above step should be done after consulting Business and considering data volume that needs to be edited/created.
In most case once you perform the loading and activation of MD your activation should work fine when repeated.
There are cases where it failed again with the same error. In that case try this also (ensure that PSA is there).
Delete the request in red.
Go to monitor
Edit > Setting for further update > Packet should be processed in the background.
Edit > Update Reversal > Read everything manually > Yes
Background processing successfully scheduled
Then you can see the Load running again.
Once this is done perform activation again
Hope it helps
Regards
Bala

Powershell import-spweb fails with "parent does not exist" error.

So, I have a sp 2010 site at http://myfarm/sites/it/d22 and I want to copy the contents to
http://myfarm/sites/bb/d62 .
I perform
Export-SPWeb -Identity http://myfarm/sites/it/d22  -Path d:\temp\d22
-IncludeUserSecurity –IncludeVersions All -NoFileCompression –Verbose
and then I perform
import-spweb -identity http://myfarm/sites/bb/d62 -path d:\temp\d22   -includeusersecurity -nofilecompression -verbose -force
It runs for 4-5 minutes and then produces the error:
[Folder] []   Error: The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
[Folder] []   Error: The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
FatalError: The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
Progress: Import did not complete.
Finish Time: 6/11/2014 8:59:23 AM.
Duration: 00:03:40
Finished with 0 warnings.
Finished with 3 errors.
Log file generated:
        d:\temp\d22\import.log
Import-SPWeb : The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
At line:1 char:13
+ import-spweb <<<< -identity
http://myfarm/sites/bb/d62 -path d:\temp\d22   -includeusersecurity
-nofilecompression -verbose -force
    + CategoryInfo          : InvalidData: (Microsoft.Share...CmdletImportWeb:SPCmdletImportWeb) [Import-SPW
   eb], SPException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletImportWeb
Of course bb/d22/ADMIN does not exist - d22 exists under sites/it . And Admin should be part of the export of d22 that should be created if the process completes.
Anyone have any idea what is going on here?

http://www.livingonthecloud.net/2010/05/exporting-and-importing-sharepoint.html
This error is not helpful and for us the problem was permission related. We had used users (albeit domain admin accounts) to export and import the data that were different from the site collection administrators. To fix we had to do the following:
Make sure the site collection administrator is the same on both the source and destination servers.
When running the export and import, make sure you are running the stsadm commands as the site collection administrator. This ensures the permissions are aligned and the import should work.
stsadm Import error: The 'ASPXPageIndexMode' attribute is not declared
Not sure what the cause of this error is, but we found a fix online:
To get round it I edited C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\DeploymentManifest.xsd on the destination server:
under section
   
I added the following.
<xs:attribute name="ASPXPageIndexMode" type="xs:string" use="optional"></xs:attribute>
<xs:attribute name="NoCrawl" type="xs:boolean" use="optional"></xs:attribute>
<xs:attribute name="CacheAllSchema" type="xs:boolean" use="optional"> </xs:attribute>
<xs:attribute name="AllowAutomaticASPXPageIndexing" type="xs:boolean" use="optional"></xs:attribute>

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Incremental load fails with the error LM_44127 Failed to prepare the task

Guys,
I have created a custom mapping and cretaed a execution plan for this mapping in the DAC. The full load completes successfully. But when ever the incremental lod is run , i am getting the below error and the task fails(The SDE load completes sucessfully , but the SIL load fails with the below error).
LM_44127 Failed to prepare the task
Please help!!!

i googled it..
http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/lm_44127-failed-to-prepare-task-when-running-workflow-in-informatica-86-on-aix-3199309
you can try for better links now.. !!

Data load failing with a short-dump

Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith Kibuuka

Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards

ORA-27369: job of type EXECUTABLE failed with exit code: Not owner

Hi
I created a backup RAC database job using DBMS_SCHEDULER under RMANTEST schema (a DBA account) and I got the error as subject.
begin
dbms_scheduler.create_job(
job_name => 'scheduler_backup',
job_type => 'EXECUTABLE',
number_of_arguments => 2,
job_action => '/opt/oracle/admin/bin/rman_fullbackup_RAC_TEST_test.sh',
comments => 'backup via scheduler'
dbms_scheduler.SET_JOB_ARGUMENT_VALUE('scheduler_backup', 1, 'TEST');
dbms_scheduler.SET_JOB_ARGUMENT_VALUE('scheduler_backup', 2, 'TEST2');
dbms_scheduler.enable('scheduler_backup');
end;
Thanks,
Kevin

Hi Ravi
Thanks for your input.
"ORA-27369: job of type EXECUTABLE failed with exit code: Not owner" is what I copied from ADDITIONAL_INFO of USER_SCHEDULER_JOB_RUB_DETAILS.
One thing I don't understand of your words is that
"On 10gR1 and 10gR2 you can redirect the stdout/stderr within your script and take a look at those log files."
In my script, I have log files but I cannot see it. I guess the job fails directly without hitting the redirection line in the script. Do you mean I shall write something like this
dbms_scheduler.create_job (
job_action => '/opt/oracle/admin/bin/backup.sh > backup.log'
Another one is
"make sure that the user that external jobs run as must be able to run your script"
But OS user and database user are two different accounts at different level.
I am using 10.2.0.2 RAC. The Unix script runs successfully every night. I just want to take advantage of DBMS_SCHEDULER to avoid host dependency.
Thanks,
Kevin

Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

Summary:
With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
Steps to Reproduce:
Trying to render to Quicktime files using network shared folders as a destination:
Unable to open file. (-1610153459)
The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
We do not have a D: drive in our Windows 7 workstations, they are all C: only.
It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
Any help would be appreciated.
Cheers!
Expected Results:
Error -43: file not found
Actual Results:
The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
Regression:
All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
Notes:
All software that uses quicktime movie exports showed this error.

Not sure what file your are referencing? Thanks for your suggestion, however, it's not relavant.
It renders fine if you render to either the UNC path or the first mapped drive.
i.e. If you have two mapped drives G: and H:
they both point to \\fileserver\share1\folder
If you render to H: it will fail, if you render to G: it works! Same path, same user, same permissions.
The only difference is H comes after G, so it fails... BUG. If it was to do with anything else, underscores, permissions etc, it would fail on both.

Invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

Hi,
I have mentioned some issues that I am facing in SOAP receiver adapter:
[XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found;
Apart from that I am trying with unchecking 'Do Not Use SOAP envelope' and by using MessageTransformBean, for which I am getting the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
Need your help in resolving this.
Regards,
Vishal

I have some ideas which will help you out. Check the below option one by one:
1. Check receiver server is accessable from XI/PI system through IP address in command prompt.
2. Check whether any PORT is enabled for this server. ex: http://ipaddress:portno/XXX/XXX.asmx
3. You can download webservice tool(SOAP UI and etc..)to check your webservice(WSDL) file able to connect the server by importing webservice file in this tool.
4. Sometime customer may updated in their application(coding and etc) and not given the updated webservice file to us. so make sure you got updated one.
Regards,
Senthil

Content Browser (0BCT_CB_1) load fails with conversation id not found error

Similar Messages

Maybe you are looking for