Content Conversion in receiver channel
Hi all,
I have a proxy to FTP scenario with no mapping involved.Over proxy communication PI is receiving the data, I am creating the CSV file using content conversion in receiver channel and placing the file at FTP.
The file name is coming in one of the field of the input xml,I am using variable substitution and setting the file name from that particular field value.But as I don't want that node and file name element in my output file content, please guide me what parameters can I set in my content conversion to remove the FileNode from o/p csv file.
The sample input xml is
<MT>
<Record>
<Field1>1</Filed1>
<Field2>2</Filed2>
</Record>
<Record>
<Field1>3</Filed1>
<Field2>4</Filed2>
</Record>
<FileNode>
<FileName>InutFile</FileName>
</FileNode>
</MT>
I want output xml to be like
1,2
3,4
I have followed this blog /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12 to cut the FileNode, but it gives an error in cc parameters.
In my actual i/p payload,the Record is 0..unbounded and there are 50 sub elements inside Record element.
Please provide your inputs.
Thanks,
Ruchi
Hi Ruchi,
Change your structure like this.
MT>
<Record>
<Field1>1</Filed1>
<Field2>2</Filed2>
</Record>
<Record>
<Field1>3</Filed1>
<Field2>4</Filed2>
</Record>
<FileNode>
<FileName>InutFile</FileName>
</FileNode>
</MT>
Dont put the filenode under Record.
Also Add the below parameters.
FileNode.fieldSeparator '0'
FileNode.endSeparator '0'
FileNode.fieldFixedLengths 0
FileNode.fixedLengthTooShortHandling Cut
FileNode.fieldNames FileName
Now use the same parameter mentioned in the blog .Your problem will be resolved.
Similar Messages
-
Problem with file content conversion in receiver file adapter
Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
ChandraPosted in Incorrect forum.
Posted again in Process Integration forum -
File content conversion in receiver
Hi,
My receiver Message type structure is
Heading1
subheading 1
FieldValue1
FieldValue 2
Fieldvalue3
I want to create file content conversion in receiver side.
plz help me to create what could be my recordset structure, name, value.
my scenario is Idoc to file.Ruban:
Your FCC goes like this
subheading1.fieldSeparator = ',' /* if comma is the separator you want, if u need any other replace it*/
subheading1.endSeparator = 'nl'
Did you check my previous post in your other thread, I posted similar example there. -
Idoc 2 file - file content conversion in receiver
Hi,
My scenario is idoc to file.
if i want to use file content conversion at receiver side,
so i need to create record set according to sender side data type or receiver data type?
plz give some inputs reg. this.
ThanksHi,
There is problem while refreshing in sap xi also.
when i pass new parameter like 7 in my recordset structure,
it is immediately reflecting in CC monitoring.
error it is showing that '7'.
but if i remove that in record set structure
(after activating that in ID)
even though
if i stop and start my CC manually also,
still it is showing that error in CC monitoring
like '7'
basic concept of this file content conversion is
I have to keep at least field separator (ie 'nl' )for outer most node element ie Customer_copy and record set stru. as Customer_copy
is it right?
I tried my own way...still it is giving that error.
what could my fieldSeparator, endSeparator, for ur last case plz tell me?
Edited by: ruban R on Apr 22, 2008 3:01 AM -
Poulate the header levels fields in Content Conversion in receiver FAdapter
Hi All,
I have req in that there is table stucture , this table strcture I want to populate the header level and item level also at receiver side. I am using Content Conversion at receiver side.
the data is like this
at header level
Country City Name Age
India bom kk 19
Sweden Stock GG 20
for this type file How can I create the datatype and In wht way I will use content conversion for this.wht paramters I have to give in in Content Conversion.......
RegardsHI Sudip,
the field labels I want in excel file at top or header of every coloum are)
Country City Name Age
below these fields only the value of these fields will come like this
India bom kk 19
Sweden Stock GG 20
for this u mean to say I have to declare only header
Create Data Type with sub-element ITEMS(just an example)
Then Country,Name,Age or whatever field you want to add in header of output file.
Once data type is ready now time to configure Receiver CC:
Use following Content Conversion Parameters:
Recordset Structure: ITEMS
ITEMS.addHeaderLine: 1
ITEMS.fieldSeparator: (space)
ITEMS.endSeparator: 'nl'
and my data will come like this in file
Country City Name Age
India Banglore jjjjj 24
England london kkkk 88
Can u plz cofirm for this...........
Regards -
Content Conversion in Receiver
Hi,
This is my target structure which i need to convert to text file. (File Content Conversion)
<b>Header1 1-1(Occurence)</b>
|_
Field1 1-1 (Occurence)
Field2 1-1 (Occurence)
<b>Header2 1-1(Occurence)</b>
|_
Field3 1-1 (Occurence)
Field4 1-1 (Occurence)
<b>Header3 1-1(Occurence)</b>
|_
Field5 1-1(Occurence)
<b>Header4 1-Unbounded(Occurence)</b>
|_
<i><b>SubHeader1 1-1 (Occurence)</b></i>
|_
Field6 1-1(Occurence)
<i><b>SubHeader2 1-1 (Occurence)</b></i>
|_
Field7 1-1(Occurence)
<i><b>Subheader3 1-Unbounded(Occurence)</b></i>
|_
Field8 1-1(Occurence)
Field9 1-1(Occurence)
<i><b>Subheader4 1-1</b></i>
|_
Field10 1-1 (Occurence)
<b>Header5 1-1 (Occurence)</b>
|_
Field11 1-1 (Occurence)
The target structure must be converted to a text fiel in the following format:
Header1
Header2
Header3
Subheader1
SubHeader2
SubHeader3(Repeats)
Subheader4
Subheader1
Subheader2
Subheader3(Repeats)
Subheader4
Header5
I have to make use of File Content Conversion. Please guide me as I am new to XI.
Thank you very much.
BestRegards,
PritsFor File Content Conversion in receiver file adapter, please refer to the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
I believe the file adapter support for two level of structure, in your case,
header1
subline1
subline2
should be OK. But need you to have some trial.
--Wenning -
Hierarchy on file content conversion for receiver?
Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>051</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>051</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005010</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005011</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00005</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00002</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>061</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>061</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005012</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005013</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005014</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00006</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00003</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header (1-1)
detail (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header (1-1)
..detail (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu -
Content Coversion in Receiver Channel to Windows platform adding xtra space
I am using SAP's content conversion module, MessageTransformBean, to build a file from a proxy. If I send the file to a UNIX platform, everything is ok. If I send the file to a Windows platform, an extra space is added at the end of each line, making the record length 1 character too long. I changed it to comma delimited, and the extra space was not added. Is there anything special I need to do when sending to a Windows platform?
fcc Transform.Class com.sap.aii.af.sdk.xi.adapter.Conversion
fcc Transform.ContentType text/plain;charset=utf-8
fcc xml.ZH38CI_BN_US_DELTA_CA_DTL.fieldFixedLengths 1,9,4,4,1,6,1,8,16,6,6,1,6,6,1,1,3
fcc xml.ZH38CI_BN_US_DELTA_CA_DTL.fixedLengthTooShortHandling Cut
fcc xml.ZH38CI_BN_US_DELTA_CA_HDR.fieldFixedLengths 1,2,4,30,29,10,4
fcc xml.ZH38CI_BN_US_DELTA_CA_HDR.fixedLengthTooShortHandling Cut
fcc xml.ZH38CI_BN_US_DELTA_CA_TRL.fieldFixedLengths 1,8,71
fcc xml.ZH38CI_BN_US_DELTA_CA_TRL.fixedLengthTooShortHandling Cut
fcc xml.addHeaderLine 0
fcc xml.conversionType StructXML2Plain
fcc xml.recordsetStructure ZH38CI_BN_US_DELTA_CA_HDR,ZH38CI_BN_US_DELTA_CA_DTL,ZH38CI_BN_US_DELTA_CA_TRLI tried moving the module to every possible position, and I could not get it to work for receiver channel. Maybe I didn't have something correct, but I was able to use this solution in a sender channel. Thank you for that. FYI...I was able to get the my receiver channel working with the following parameter for each structure.
xml.XXXXXXXXXX.endSeparator '0x0D''0x0A' -
REG: File content conversion in Receiver file adapter
HI Gurus,
I have the scenario like proxy to file with content conversion
my message type for the source like this
MT_SOURCE
-----||
|---ROW
------------||
|---LINE
target strucuture also same
MT_TARGET
-----||
|---ROW
------------||
|---LINE
i am using the following FCC parameters in receiver file adapter
LINE.fieldSeparator = ' '
LINE.fixedLineWidth = 90
LINE.lineSeparator = 'nl'
LINE.fieldFixedLengths = 200
LINE.endSeparator = 'nl'
the output file show the data differently in note pad when compare to word
word output
dgepvs 023456987
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
notepad out put
dgepvs 023456987 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01
word output is the correct output wat i am expect but same out put i want in note pad can any help me out for this how can i resolve this
Thanks in advanceThere is nothing wrong in your content conversion parameters. This is pure editors interpretation for the next line character.
I would do in java program to fix this issue using '\r\n' You might want to try and see how that helps for notepad editor. -
File Content Conversion in Receiver Adapter Help
Hi,
I need to have a flat file at receiver side with the following structure.
Product
LineItem
Notes
Product
LineItem
Notes
But i am getting as
Product
Product
LineItem
Notes
Notes
Please suggest me the changes to be made in File Content Conversion Parameter
Your Help will be appreciated.
Thanks in advance,
AshokSingh,
I think we wont give field names in the receiver file adapter. Please find the details below:
RecordSet Structure: Product,LineItem,Notes.....
Parameters:
Product.fieldFixedLengths:30,10...
Product.endSeparator:'nl'
LineItem.fieldFixedLengths:30,10..
LineItem.endSeparator:'nl'
Notes.fieldFixedLengths:30,10...
Notes.endSeparator: 'nl'
Thanks
Ashok -
File Content Conversion at receiver end
Hi
My XML structure is
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MT_CreatePurchaseOrder xmlns:ns0="http://demo.com/POCreate">
<recordset>
<POHeader> (min 1 max 1)
</POHeader>
<POLineItem> (min 1 max unbounded)
</POLineItem>
<POScheduleLine> (min 1 max unbounded)
</POScheduleLine>
<POPromiseScheduleLine> (min 1 max unbounded)
</POPromiseScheduleLine>
</recordset>
</ns0:MT_CreatePurchaseOrder>
I am mapping this particular structure from Idoc orders05(PO create). My client needs the out file as txt with tab as delimiter and should be one line.(Nodes POLineItem and POScheduleline will repeat)
Help me out what should be passed as Content conversion Parameters..
Thanks in advance
Gowri KHi Gowri,
Please take a look at these threads.. They clearly explain File CC on the reciever side
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
Hope this helps you out!
cheers,
Prashanth
P.S Please mark helpful answers
It shows the CC params done on the reciever side. -
File content conversion for receiver file structure(fixed length)
Hi Experts,
I am tryinng reciver file FCC for the following strcuture. it seems I have done some wrong configuration,and failing at conversion level. so experts please help me to get the correct content conversion parameters.
note : ( * Nothing can be altered at repository side * ) and the fields are fixed in length so the file needs to be fixed lentgh format.
Tree--Occ--
TYPE
SBLSALDATA--1..1--
SBLSALDATA
SALDATA----
1..1
Headrec----
1..1
XXX----
1..1
XXX----
1..1
XXX----
1..1
TotalDatarec----
1..Unbounded
YYY----
1..1
YYY----
1..1
YYY----
1..1
YYY----
1..1
LASTREC----
1..1
ZZZ----
1..1
ZZZ----
1..1
Thanks in advance.I have done in the same procedure as in above link. its not working either.
My receiver structure looks like below.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:TaxData xmlns:ns1="urn:XXXXXXXX">
<EmpTaxDat>
<Header>
<A/>
<B/>
<c/>
</Header>
<Detail>
<D/>
<e/>
<f/>
</Detail>
<Trail>
<g/>
<h/>
<i/>
</Trail>
</EmpTaxDat>
</ns1:TaxData>
Edited by: Harish.k on Jan 2, 2010 2:15 PM -
Content Conversion - File Receiver
Hi All,
I am facing problems with File Content Conversion in the File Receiver adapter.
Input XML File
===============
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_Hyp_FICO057 xmlns:ns="http://Astra-Honda.com/Prime/FICO/FICO057">
<userlist>
<user>
<Year>2005</Year>
<Month>Jan</Month>
<Version>0</Version>
<Value>64</Value>
<CostCenter>P13000</CostCenter>
</user>
<user>
<Year>2006</Year>
<Month>FEB</Month>
<Version>0</Version>
<Value>264</Value>
<CostCenter>P13000</CostCenter>
</user>
</userlist>
</ns:mt_Hyp_FICO057>
I have set the Content Conversion parameters in receiver File Adapter as
Recordset Structure = user
user.fieldSeparator = ;
but i am getting the output only as
Output
======
2005;2006
it is not considering other fields.
Can anyone help.
Thanks in Advance
Chemmanzhey
also specify the end separator
<b>user.endSeparator='nl'</b>
rgerads
jithesh -
Query on Content conversion for Receiver SFTP Adapter
Hi Experts,
We have the receiver structre as follows:
<DT_Receiever>
<Header>
<field1>abc<\field1>
<field2>1234<\field2>
<\Header>
<Detail>
<field3>nhj<\field3>
<field4>bshsrt<\field4>
<\Detail>
<\DT_Receiever>
We should do content conversion for the above structure using SFTP adapter at the receiver end.
Kindly provide us some tips in achieving the same.
Thanks
Suganya.Hi Suganya,
You can use message tranform bean for ur case.
U have to use "StructXML2Plain"
Please follow below link for ur reference If you face any problem please let me know....
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Thanks,
Enivass -
.csv file Vs .txt file Content conversion sender file channel
Hi Experts,
I have a file with filename say input.csv.I want to do content conversion for these .CSV file.Is it same like we have to do for .txt file say input.txt.
when i open my .csv file in notepad, i get multiple rows with each field separated by ';'.what are the content conversion parameters we have to define for .csv file and can we mention input.csv as the file name as a source file name.
Thanks
DeepakHi,
Use the following parameters for Sender file channel in case of reading .csv file
Recordset Structure.fieldSeparator -
Recordset Structure.endSeparator -
'nl'
Recordset Structure.fieldNames -
provide field names separated with ,
Regards
Seshagiri
Maybe you are looking for
-
Query about generic object services
hi, In the system that I'm using there's an generic object service added to a transaction through an SAP Note. The code added to that transaction through that service, I want to add it to another transaction. How do I do that.
-
I download the file and click on run and then it will ask if I want to allow program to make changes, and I click yes... That's it...the download installer never comes up...I have tried several times to download firefox...
-
AQ Servlet Help - AQHttp.java is missing
Have installed Oracle OAS 10g R2 on SUSE 8. The aim to to get the Oracle AQ servlet working. I have been following the Oracle Streams Advanced Queueing Guide: [http://docs.oracle.com/cd/E11882_01/server.112/e11013.pdf] Now, to test the AQ servlet it
-
Hi, i'm looking for exits/badis in the MIRO transaction (Enter Incoming Invoice) after pushing the Save-button. For transaction/event : - Invoice : for some conditions a subprocess with creation of a sales order must started (---> done in badi INVOIC
-
Implementing the IF_WORKFLOW interface into a custom class
In workflow tasks you can use ABAP Classes and their methods to implement functionality instead of always using BOR objects. I created a class with a static method and got it to work outside of my task. As soon as I put the class and method into my t