Control-C in SQL*Plus on Windows
Hi,
I use the "command-line-looking" sqlplus.exe (not sqplplusw.exe) Client version 10.2.0.1.0 on my Win-XP PC.
An annoying "feature" of this SQL*Plus, is that it closes when I press ctrl-c.
For example, when a multiple-lines output is running in the window and I want to stop it (there is no "Cancel" button in this SQL*Plus),
I have to be carefull not to press ctrl-c too many times.
Or when I start an Anonymous PL/SQL block - I have no way to end editing without executing it, but to enter some nonsense text and execute to failure.
Anyone knows how to avoid the window closure, or perform these 2 actions without using control-c ?
Thanks a lot,
S.
instead of starting sqlplus.exe, start a CMD window, and then start sqlplus. if you ctrl-c too many times (or if it registers after the last of the output has been displayed) it will close the sqlplus executable. if you start in a cmd window, and sqlplus.exe closes, you're back to the cmd prompt, and all of you previous output/sql is still there.
make a shortcut for sqlplus, and for it's "target", use the following:
cmd.exe /k sqlplus
Similar Messages
-
Hi,
I got 'Windows Vista' OS, where 'Oracle 10G Express Edition' installed.
To my knowledge sql*plus should be available by default with Oracle version. But here 'Run sql Command Line' is being appeared which has got the similar look as a command prompt which seems to be incovenient. Is there anyway that i can have sql*plus with tool bar in it.
Thanks,
Ram JIs there anyway that i can have sql*plus with tool bar in it.If you mean the "old" sqlplusw, then no, there isn't. You can :
1. use SQL Workshop within XE
2. install SQL Developer (free). -
Unable to Login to Idle Instance from SQL*Plus in windows
Hello,
I'm cloning the db from windows to windows enviornment. At auxilary instance after configuring the Listener and making Password file to right folder when I try to connect to Idle Instance through sql*plus by follwring connad
c:\sqlplus sys/password as sysdba
It gives me ORA-12518 Tns: Listener could not hand off client conenction error
Then I put the follwing parameter in listener.ora DIRECT_HANDOFF_TTC_LISTENER=OFF and restart listener and then try to connect it gives me Ora-12560: TNS protocol adapter error.
I try to connect through tnsnames but give me same error.
Kindly tell me how to resolve this issue as its not allowing me to connect to an idle instance so that I can go further.
I'm using 10gR2 on windows server 2003.
Regards,
Abbasifollow the steps to clone database:
# 1. Backup the source database.
To use RMAN duplicate an RMAN backup of the source database is required. If there is already one available, skip to step 2. If not, here is a quick example of how to produce an RMAN backup. This example assumes that there is no recovery catalog available:
rman target sys@<source database> nocatalog
RMAN>backup database plus archivelog ;
RMAN> backup archivelog all;
This will backup the database and archive logs.
# 2. Produce a pfile for the new database
This step assumes that the source database is using a spfile. If that is not the case, simply make a copy the existing pfile.
Connect to the source database as sysdba and run the following:
create pfile='init<new database sid>.ora' from spfile;
This will create a new pfile in the $ORACLE_HOME/database directory.
The new pfile will need to be edited immediately. If the cloned database is to have a different name to the source, this will need to be changed, as will any paths. Review the contents of the file and make alterations as necessary.
Because in this example the cloned database will reside on the same machine as the source, Oracle must be told how convert the filenames during the RMAN duplicate operation. This is achieved by adding the following lines to the newly created pfile:
db_file_name_convert=(<source_db_path>,<target_db_path>)
log_file_name_convert=(<source_db_path>,<target_db_path>)
# 3. Create bdump, udump & cdump directories
Create bdump, udump & cdump directories as specified in the pfile
# 4. Create a service
c:/>oradim –new –sid <clonedatabasename> –intpwd <pwd>
eg:
c:>oradim –new –sid clonedb –intpwd oracle
# 6. Duplicate the database
From sqlplus, start the instance up in nomount mode:
startup nomount
Exit sqlplus, start RMAN and duplicate the database. As in step 1, it is assumed that no recovery catalog is available. If one is available, simply amend the RMAN command to include it.
rman target sys@<source_database> nocatalog auxiliary /
duplicate target database to <clone database name>;
thats it
For RMAN Cloning refer:
follow the documentation replace the destinations/locations with your location/folder/destination in source and target database.
http://www.dba-oracle.com/t_copy_clone_windows_database.htm
http://www.shutdownabort.com/quickguides/clone_rman.php
http://www.akadia.com/services/ora_duplicate_database_rman.html
for manual cloning in windows refer the link below:
http://coskan.wordpress.com/2007/04/20/adding-new-database-to-windows-without-dbca-or-rman-clone-or-rman-restore/ -
Downloading and installing Oracle (with sql plus) on Windows 7 Professional
Hi,
I got a new laptop which has Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plus in this system.
I would appreciate if somebody could provide me a link to the appropriate database (with sql plus installation capability). Also if available the installation guide.
Thanks in advance.Hello,
Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plusOracle *10g* is not certified on Windows *7*, except with the latest patchset *10.2.0.5*, and its Premium Support ended on the *31st of July 2010*.
You should download Oracle *11.2* which is certified on Windows *7 - 64 bit*.
You'll find the Documentation and Download tabs on the link below:
http://www.oracle.com/technetwork/database/enterprise-edition/overview/index.html
About SQLPlus, it's delivered with Oracle Server and, in *11g*, you can still use it from a DOS box. If you intend to have a Graphical Tool, you should use Oracle SQL Developer instead:
http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
Hope this help.
Best regards,
Jean-Valentin -
SQL plus for windows homeediton any idea????pls help
i have windows xp home edition.....
i would like to install oracle database just for practice
pls help me what do i need to install if i want to run sql plus in windowx xp homeedtion...........
pls help me out!!!
Regards#
madhuTo create a database you can user "Database Configuration Assistant". You find it in your menu.
If you already have a database you should start it. Start the database using the service administration tool ( "Service") of XP.
Bye, Aron -
How to control layout in SQL*plus command
Hi, All,
I use SQL*plus to generate a simple report
BREAK ON <column1> duplicates skip page ON REPORT
COMPUTE COUNT LABEL 'Total number of trader shown on this report for this :' OF <column2> On <column1>
it shows '********' and '-------------------' above the lable and compute result.
Can I take '******' and '----------------' off
and the label can not longer than the length of <column1>, otherwise it will be truncated.
what if it is longer than the length of <column1>
and I don't want to change the layout of <column1> ?
ThanksPeter,
FYI, this forum is dedicated for Oracle Reports issues. There's another forum dedicated to SQL*Plus - I believe it's now called iSQL*Plus, btw. You should try your question in the other forum.
regards,
Stewart -
Need SQL*PLUS ON WINDOWS 7 32bit
PLEASE HELP!!!!!!!
I HAVE FIRST TRIED ORACLE 9I DATABASE INSTALLATION BUT IT FAILED.....(ERROR OCCURED AND SETUP CLOSED FORCEFULLY)
[ unable to install more than 28% from 1st disc only]
THEN I UNINSTALLED IT FULLY.
NEXT I TRIED ORACLE 11G (R2) [downloaded from oracle site]
BUT I WAS UNABLE TO OPEN SQL PLUS .
[ problem was in the username/password part.
i filled the username/password (or database nname, whatever it is ........ ie. what i filled in the place of the default "orcl" and the password i provided during installation)
please specify WHICH usename password i have to provide in .....]
CURRENTLY I HAVE UNINSTALLED 11G(R2) ALSO......989115 wrote:
Heading1:Help Me Connect to Database
http://docs.oracle.com/cd/B19306_01/server.102/b14357/ape.htm#CHDIEIHJ
i read this page and created a environment variable sql with variable path to the folder containing extracted files...
now help me connect to a database.
i don't want to download more files ( also all the files are so large that the take whole day to download........ oracle 11g was 2GB)You need to understand... The SQL*Plus client is just a tool to allow you to connect to a database, because it is the database that will take your SQL commands and execute them... the client is just the tool for sending the commands to the database.
So, just downloading and installing the client software itself, is fine... if you've got a database elsewhere (on a server somewhere) to connect to. If, however, you want to practice database programming at home on your own computer, you will have to download and install some version of the database, whether you do that directly as the database software itself (which will install the client software as well as part of it), or as the Virtual Machine version (which is sort of the same thing, but the database comes almost ready for you to use "out of the box").
I'm afriad you are going to have to download more files. -
I am getting the following error using SQL Plus on Windows "ORA-28865: SSL connection closed"
I have set up my certificates on client and server and have tested the port using TCP and works fine. TCPS fails with ORA-28865. I have attached my trace file which was using level 10
Please any assistance is appreciated
(5888) [11-APR-2015 09:36:28:365] nsnainit: NS Connection version: 315
(5888) [11-APR-2015 09:36:28:365] nsnainit: inf->nsinfflg[0]: 0x41 inf->nsinfflg[1]: 0x41
(5888) [11-APR-2015 09:36:28:365] nsnainit: "or" info flags: 0x41 Translations follow:
native service(s) is (are) wanted
(5888) [11-APR-2015 09:36:28:365] nsnainit: "or" info flags: 0x41 Translations follow:
native service(s) is (are) wanted
"and" info flags: 0x41 Translations follow:
native service(s) is (are) wanted
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsopen: global context check-in (to slot 0) complete
(5888) [11-APR-2015 09:36:28:365] nsopen: lcl[0]=0xf4ffefff, lcl[1]=0x102000, gbl[0]=0xfabf, gbl[1]=0x1, tdu=2097152, sdu=8192
(5888) [11-APR-2015 09:36:28:365] nsfull_opn: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x0
(5888) [11-APR-2015 09:36:28:365] nsfull_opn: nsctx: state=7, flg=0x4001, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsmal: 168 bytes at 0x214d1a0
(5888) [11-APR-2015 09:36:28:365] nsmal: 168 bytes at 0x214dbf0
(5888) [11-APR-2015 09:36:28:365] nsmfr: 239 bytes at 0x20e53a0
(5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=67, *bl=238, *what=8, uflgs=0x0, cflgs=0x3
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsdo: rank=64, nsctxrnk=0
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=14, flg=0x4005, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=8111
(5888) [11-APR-2015 09:36:28:365] nscon: doing connect handshake...
(5888) [11-APR-2015 09:36:28:365] nscon: sending NSPTCN packet
(5888) [11-APR-2015 09:36:28:365] nspsend: plen=70, type=1
(5888) [11-APR-2015 09:36:28:365] ntzwrite: entry
(5888) [11-APR-2015 09:36:28:365] nzos_Write: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: socket 560 had bytes written=99
(5888) [11-APR-2015 09:36:28:365] nttwr: exit
(5888) [11-APR-2015 09:36:28:365] nzos_Write: exit
(5888) [11-APR-2015 09:36:28:365] ntzwrite: exit
(5888) [11-APR-2015 09:36:28:365] nspsend: 70 bytes to transport
(5888) [11-APR-2015 09:36:28:365] nscon: sending 238 bytes connect data
(5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=67, *bl=238, *what=1, uflgs=0x4002, cflgs=0x0
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=2, flg=0x4005, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=431
(5888) [11-APR-2015 09:36:28:365] nsdo: 238 bytes to NS buffer
(5888) [11-APR-2015 09:36:28:365] nsdofls: DATA flags: 0x0
(5888) [11-APR-2015 09:36:28:365] nsdofls: sending NSPTDA packet
(5888) [11-APR-2015 09:36:28:365] nspsend: plen=248, type=6
(5888) [11-APR-2015 09:36:28:365] ntzwrite: entry
(5888) [11-APR-2015 09:36:28:365] nzos_Write: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: socket 560 had bytes written=277
(5888) [11-APR-2015 09:36:28:365] nttwr: exit
(5888) [11-APR-2015 09:36:28:365] nzos_Write: exit
(5888) [11-APR-2015 09:36:28:365] ntzwrite: exit
(5888) [11-APR-2015 09:36:28:365] nspsend: 248 bytes to transport
(5888) [11-APR-2015 09:36:28:365] nsdoacts: flushing transport
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: entry
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: Command = 4
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: unknown command 4 - calling underlying protocol adapter
(5888) [11-APR-2015 09:36:28:365] nttctl: entry
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: operation is unsupported
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: exit
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctxrnk=0
(5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=68, *bl=2048, *what=9, uflgs=0x0, cflgs=0x3
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsdo: rank=64, nsctxrnk=0
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=2, flg=0x4005, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=8111
(5888) [11-APR-2015 09:36:28:380] nscon: recving a packet
(5888) [11-APR-2015 09:36:28:380] nsprecv: reading from transport...
(5888) [11-APR-2015 09:36:28:380] ntzread: entry
(5888) [11-APR-2015 09:36:28:380] ntznzosread: entry
(5888) [11-APR-2015 09:36:28:380] nzos_Read: entry
(5888) [11-APR-2015 09:36:28:380] nttrd: entry
(5888) [11-APR-2015 09:36:28:380] ntt2err: entry
(5888) [11-APR-2015 09:36:28:380] ntt2err: exit
(5888) [11-APR-2015 09:36:28:380] nttrd: socket 560 had bytes read=0
(5888) [11-APR-2015 09:36:28:380] nttrd: exit
(5888) [11-APR-2015 09:36:28:380] nzos_Read: exit
(5888) [11-APR-2015 09:36:28:380] ntznzosread: encountered "wouldblock" error
(5888) [11-APR-2015 09:36:28:380] ntctst: size of NTTEST list is 1 - not calling poll
(5888) [11-APR-2015 09:36:28:396] nzos_Read: entry
(5888) [11-APR-2015 09:36:28:396] nttrd: entry
(5888) [11-APR-2015 09:36:28:396] nttrd: exit
(5888) [11-APR-2015 09:36:28:396] ntt2err: entry
(5888) [11-APR-2015 09:36:28:396] ntt2err: Read unexpected EOF ERROR on 560
(5888) [11-APR-2015 09:36:28:396] ntt2err: exit
(5888) [11-APR-2015 09:36:28:396] nzos_Read: exit
(5888) [11-APR-2015 09:36:28:396] ntznzosread: SSL connection closed gracefully.
(5888) [11-APR-2015 09:36:28:396] ntznzosread: SSL connection terminated normally.
(5888) [11-APR-2015 09:36:28:396] ntznzosread: returning NZ error 28865 in result structure
(5888) [11-APR-2015 09:36:28:396] ntznzosread: exit
(5888) [11-APR-2015 09:36:28:396] nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=28865, ora[1]=0, ora[2]=0
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsdo: nsctxrnk=0
(5888) [11-APR-2015 09:36:28:396] nscall: unexpected response
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: entry
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: exit
(5888) [11-APR-2015 09:36:28:396] nstimarmed: no timer allocated
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: entry
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: Command = 14
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: exit
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: entry
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: Command = 15
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsfull_cls: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x440
(5888) [11-APR-2015 09:36:28:396] nsfull_cls: nsctx: state=1, flg=0x4001, mvd=0
(5888) [11-APR-2015 09:36:28:396] nsclose: closing transport
(5888) [11-APR-2015 09:36:28:396] ntzdisconnect: entry
(5888) [11-APR-2015 09:36:28:396] ntzFreeNTZData: entry
(5888) [11-APR-2015 09:36:28:396] nzos_DestroyCtx: entry
(5888) [11-APR-2015 09:36:28:396] nzos_DestroyCtx: exit
(5888) [11-APR-2015 09:36:28:396] ntzFreeNTZData: exit
(5888) [11-APR-2015 09:36:28:396] nttdisc: entry
(5888) [11-APR-2015 09:36:28:396] nttdisc: Closed socket 560
(5888) [11-APR-2015 09:36:28:396] nttdisc: exit
(5888) [11-APR-2015 09:36:28:396] ntzdisconnect: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsclose: global context check-out (from slot 0) complete
(5888) [11-APR-2015 09:36:28:396] nadisc: entry
(5888) [11-APR-2015 09:36:28:396] nacomtm: entry
(5888) [11-APR-2015 09:36:28:396] nacompd: entry
(5888) [11-APR-2015 09:36:28:396] nacompd: exit
(5888) [11-APR-2015 09:36:28:396] nacompd: entry
(5888) [11-APR-2015 09:36:28:396] nacompd: exit
(5888) [11-APR-2015 09:36:28:396] nacomtm: exit
(5888) [11-APR-2015 09:36:28:396] nas_dis: entry
(5888) [11-APR-2015 09:36:28:396] nas_dis: exit
(5888) [11-APR-2015 09:36:28:396] nau_dis: entry
(5888) [11-APR-2015 09:36:28:396] nau_dis: exit
(5888) [11-APR-2015 09:36:28:396] naeetrm: entry
(5888) [11-APR-2015 09:36:28:396] naeetrm: exit
(5888) [11-APR-2015 09:36:28:396] naectrm: entry
(5888) [11-APR-2015 09:36:28:396] naectrm: exit
(5888) [11-APR-2015 09:36:28:396] nagbltrm: entry
(5888) [11-APR-2015 09:36:28:396] nau_gtm: entry
(5888) [11-APR-2015 09:36:28:396] nau_gtm: exit
(5888) [11-APR-2015 09:36:28:396] nagbltrm: exit
(5888) [11-APR-2015 09:36:28:396] nadisc: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: entry
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsmfr: 2944 bytes at 0x2152400
(5888) [11-APR-2015 09:36:28:396] nsmfr: 1880 bytes at 0x2151ca0
(5888) [11-APR-2015 09:36:28:396] nscall: connecting...
(5888) [11-APR-2015 09:36:28:396] nladget: entry
(5888) [11-APR-2015 09:36:28:396] nladget: exit
(5888) [11-APR-2015 09:36:28:396] nsmfr: 238 bytes at 0x221def0
(5888) [11-APR-2015 09:36:28:412] nsmfr: 304 bytes at 0x20d8200
(5888) [11-APR-2015 09:36:28:412] nladtrm: entry
(5888) [11-APR-2015 09:36:28:412] nladtrm: exit
(5888) [11-APR-2015 09:36:28:412] nioqper: error from nscall
(5888) [11-APR-2015 09:36:28:412] nioqper: ns main err code: 12537
(5888) [11-APR-2015 09:36:28:412] nioqper: ns (2) err code: 12560
(5888) [11-APR-2015 09:36:28:412] nioqper: nt main err code: 507
(5888) [11-APR-2015 09:36:28:412] nioqper: nt (2) err code: 0
(5888) [11-APR-2015 09:36:28:412] nioqper: nt OS err code: 0
(5888) [11-APR-2015 09:36:28:412] niomapnserror: entry
(5888) [11-APR-2015 09:36:28:412] niqme: entry
(5888) [11-APR-2015 09:36:28:412] niqme: reporting ORA-28865 error
(5888) [11-APR-2015 09:36:28:412] niqme: exit
(5888) [11-APR-2015 09:36:28:412] niomapnserror: exit
(5888) [11-APR-2015 09:36:28:412] niotns: Couldn't connect, returning 28865
(5888) [11-APR-2015 09:36:28:412] niotns: exit
(5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214d1a0, data at 0x2225ca0.
(5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214dbf0, data at 0x2227d90.
(5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214d9e0, data at 0x21531c0.
(5888) [11-APR-2015 09:36:28:412] nigtrm: Count in the NI global area is now 1
(5888) [11-APR-2015 09:36:28:412] nigtrm: Count in the NL global area is now 1CLIENT SQLNET.ORA
TRACE_LEVEL_CLIENT = 10
TRACE_UNIQUE_CLIENT = ON
TRACE_DIRECTORY_CLIENT = C:\Oracle\app\client\product\12.1.0\client_1\network\trace
TRACE_FILE_CLIENT = sqlnet_client.trc
LOG_FILE_CLIENT = sqlnet_client.log
LOG_DIRECTORY_CLIENT = C:\Oracle\app\client\product\12.1.0\client_1\network\log
DIAG_ADR_ENABLED = OFF
TRACE_TIMESTAMP_CLIENT = ON
SQLNET.AUTHENTICATION_SERVICES = (ALL)
SQLNET.AUTHENTICATION_REQUIRED = FALSE
SSL_CLIENT_AUTHENTICATION = FALSE
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = C:\Oracle\app\client\product\12.1.0\client_1\network\wallets)
ADR_BASE = C:\Oracle\app\client\product\12.1.0\client_1\log
SERVER SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (ALL)
SSL_VERSION = 0
SSL_CLIENT_AUTHENTICATION = FALSE
TRACE_UNIQUE_SERVER = ON
TRACE_DIRECTORY_SERVER = /u01/app/grid/product/12.1.0/12.1.0.2/network/trace
TRACE_FILE_SERVER = sqlnet_server.trc
LOG_FILE_SERVER = sqlnet_server.log
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /u01/app/grid/product/12.1.0/12.1.0.2/owm/wallets/grid)
LOG_DIRECTORY_SERVER = /u01/app/grid/product/12.1.0/12.1.0.2/network/log
SQLNET.AUTHENTICATION_REQUIRED = FALSE
DIAG_ADR_ENABLED = OFF
TRACE_TIMESTAMP_SERVER = ON -
Connecting Oracle using SQL Plus in command window through LDAP settings?
Hi
Just like to know if it is possible to connect Oracle using SQL Plus with connection type as LDAP.
Generally we connect to Oracle in cmd window as
username/password@DBServiceName
Similarly is it possible to connect Oracle using SQL plus cmd window using LDAP configuration settings.
Eg:-
If my LDAP server is oid:123:456
Context is: cn=OracleContext,dc=abcdefgh,dc=com
DBService is: xyz
Regards
jcSpecify the -L command line option to SQL*Plus, i.e.:
sqlplus -L username/password@db @blah.sql
(this will prevent the second prompt for username/password if the initial login is unsuccessful for any reason, like an invalid password). -
What environment variable I will set for the default SQL*plus file directory
Hi there,
I run sql*plus on windows 2000 professional. I want to set a file
directory for sql*plus so that when I write something in a file,
it will be in my default file directory. What environment
variable I will set for that? Thanks in advance.hi , i have already install my oracle 8i personnel edition to my computer , but my sql plus don't seen to work ,
i understand that they username are ( scott ) and password are ( tiger ) but after i type them and press ok there will be a box coming out and it said ( Cannot open registry Software \ORACLE\HOME1\SID_LIST Starting with default sid )
after i click ok there will be another box asking for password , but i what is the password ? it look to me like a internal password , it can't be tiger for this , cos before that i have already type in my username and password , this is the later part , anyone can help? pls reply, thank alot Nigel,
I'm not sure about Oracle8i Personal Edition. The default username/passwords are:
scott/tiger
system/manager
sys/change_on_install as sysdba
You could try the database installation discussion forum for more help. If you find out what the password for this dialog is, please post it to this group for the benefit of others.
Alison -
Can I install SQL Plus in a client PC?
Dear buddies,
I am working on a PC which accesses the database using PL/SQL Developer and command line SQLPLUS (instant client). I would like to download SQL PLUS as well. Is there a way? I have seen some PCs in such a way but not sure on how to do it.
Could anyone guide me.
Thanks in advance.
Seeking your support.
AlaguBased on "white" color background, think you might be looking for SQL*Plus for Windows (sqlplusw.exe).
This can be found in the Oracle database download page, but if your just interested in the SQL*Plus for Windows download the client zip file.
Assuming your looking for version 11g for Windows (32bit), link to [http://www.oracle.com/technology/software/products/database/oracle11g/111060_win32soft.html|http://www.oracle.com/technology/software/products/database/oracle11g/111060_win32soft.html].
Down load the client file "win32_11gR1_client.zip (510,809,607 bytes)". Must accept the OTN License aggreement.
Run the installation.
SQL*Plus for Windows I think comes with Oracle Express Edition also, as another option. -
My scripts all contain relative file paths e.g.
@@../directory1/file1.sql
Is there a way of setting the current working directory in SQL Developer to make this work?
In SQL*Plus for windows you simply opened the file but this does not seem to work.As I said, run them in SQL*Plus.
SQL*Developer is a development tool and database browser, not a SQLPLus clone.
It has its own methods of extracting data which may or may not suit your output requirements. You don't need col statements as much if you are viewing data in a grid, for example. [1]
I don't know what you use the sqlplus scripts for, but they could be replaced over time with some combination of Apex, SQLDeveloper reports and straight sqldeveloper queries.
As for SQL*PLus being greyed out on the menu, there are some known issues about that. I think one of them is that you need to be using tns connections. However, the sqlplus menu item is gone in sqldeveloper 1.5 so don't rely on it. Learn to run if from the command line.
[1] Despite that, I would arguethat SQLDeveloper should support all (with tiny exceptions) SQLPlus commands. Not because I see it as a sqlplus replacement, but so it can be used to develop scripts which can then be run in SQL*Plus without amendment (without the hassle of switching back and forth during development) -
Windows service does not stop when DB is shutdown from SQL*Plus
I have a 11g XE DB in a Windows 7 machine.
The installation has created a Windows service called OracleServiceXE. It's status is STARTED.
I then login to SQLPLUS as sysdba and do a shutdown immediate;
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
Problem is, when I refresh the services, the OracleServiceXE is still showing as STARTED.
If I use the listener control to stop the listener the Windows service OracleXETNSListener changes status to BLANK.
Why is this?tvCa-Oracle wrote:
That service is a prerequisite Windows service to be able to start the database, but it is not the status of the database itself.
When you do start the database, he may or may not start the service automatically (not sure there), but it is a needed service, for each database SID, on Windows.
If you want to know what it is, open Task Manager or Process Explorer, only start the service (not the database), and see which OS process is launched.
AFAIK, this is only on Windows, there's no comparable component on Linux/Unix for this.
The Windows service OracleServiceXE has c:\app\oracle\product\11.2.0\server\bin\ORACLE.EXE XE as the Parth to executable.
If I click on the Services tab in Task manager, then right-click the OracleServiceXE and click Go to process, it show the oracle.exe in the processes tab.
If stop it, the service, from the Windows service control, the oracle.exe disappears and we cannot login to the DB.
If we start the service from the windows service control, the oradim.exe appears, then a second later the oracle.exe appears. Once the DB status of the Windows service is STARTED, the oradim.exe disappears.
So, I can start and stop the oracle DB with the Windows service. But If I stop the DB from sql*plus the the service is not stopped.... -
Problem running SQL PLUS in Oracle 8i and 9i on Windows XP
I've tried installing both Oracle 8.17 Personal Edition and also 9i in Windows XP Professional (each on a different occassion). I have run into the same problem each time. The installation itself goes fine in both cases, but when I run SQL PLUS, the Log On screen appears for 1-2 seconds then whole thing just closes automatically, so I can't ever access that application which is the only thing I need to work with. Any ideas on what's going wrong? Thanks.
Patrick,
Well a few things. Did you try TNSPING to see if the listener is up? If it's ok, can you connect with FREE toad? Download Oracle OEM and install that (the SQL net and sql plus portions). If you can't get tnsping to work, sqlplus isn't going too either. I don't know why the sqplus is actually shutting down, but I'm guessing the TNS NAMES entry isnt there (in the tnsnames.ora file). If the tnsnames entry is there then tnsping should work. Get tnsping to work first.
Tyler. -
SQL*PLUS 32 Bit Client needed for Windows 64 Bit
Hi,
I have got a 64 Bit Windows OS and an Oracle 11.
With 32 Bit Applications ( Crystal Reports) I can not run SQL NET Thick, SQL NET Thin and JDBC.
Oracle 32 Bit Installation is Missing.
Oracles "Instant Client Downloads for Microsoft Windows (32-bit)" will not do it.
http://www.oracle.com/technetwork/topics/winsoft-085727.html
What else to use ?
Thank You
Martin SautterMartin.Sautter wrote:
Hi,
i used:
instantclient-basic-nt-11.2.0.2.0.zip (32BitClient)
instantclient-sqlplus-nt-11.2.0.2.0.zip.
I did not find an "old", "classic" SQL*PLUs client.What does that mean exactly, classic client?
Did you unzip the ic sqlplus .zip (the one listed) in the same dir as ic basic?
After dezipping waht than ?
No installer, nothing ...That's the beauty of Instant Client, just unzip or move a few files, set PATH if needed, and you have client libraries all "installed" and ready.
>
You can give advice ?Generally, required lib files are (n Windows) oci.dll, oraociicusN.dll or oraocieiN.dll (N= e.g. 11). Then for Sql*plus add orasqlplusicN.dll and the .exe from ic-sqlplus package.
C:\Users\Test\Ora-IClite>dir
Volume in drive C is OS
Volume Serial Number is 6E8F-186A
Directory of C:\Users\Test\Ora-IClite
2011-12-16 09:30 <DIR> .
2011-12-16 09:30 <DIR> ..
2011-08-31 11:39 38 ldap.ora
2011-07-30 12:21 683 008 oci.dll
2011-07-30 12:21 44 153 856 oraociicus11.dll
2011-07-30 12:21 1 501 696 Orasqlplusic11.dll
2011-07-30 12:21 869 376 sqlplus.exe
C:\Users\Test\Ora-IClite>.\sqlplus user@'localhost/xe'
SQL*Plus: Release 11.2.0.2.0 Production on Fri Dec 16 09:34:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:Edited by: orafad on Dec 16, 2011 9:35 AM
Maybe you are looking for
-
How to schedule a batch job for VT01N?
Hello SAP gurus, Below is my concern: Requirement is I need to schedule a daily shipment job on SAP utilizing Tcode VT01N and we have the Variant name. I have to process daily shipments (for one shipment only) to invoice required. And the job should
-
ITunes 8 crashed my Mac OS 10.4.11
Hi everyone. I just installed itunes 8 on my computer. I had restarted my computer with no problem the first time around once the software was installed by software update and got to sync my ipod (video 80 gig). I tried to sync my iphone and my ipod
-
I can no longer use gmail with Firefox since it updated today.
This morning, Firefox had updates for version 3.6.6 and I did this and now gmail is not working. The page loads and I can see my mail, but I cannot open any of the messages or compose a message and I cannot even see the people on the chat feature (I
-
Accessing object payload type attributes by index?
Plz help Using object type in queues enforce some limitations to altering object type. You can use only ALTER TYPE and use alteration that only "expand" properties. It'is possible to change column type from VARCHAR2(10) to VARCHAR2(20) but not vice v
-
BAPI To Update Profit Center And Profit center group
HI All, We have requirement scenario in which MDM Will Syndicate the PC and PCG And We have to update the PC and PCG in R3. Do we have a Standard BAPI For Profit center and Profit Center Group Update? Thanks In Advance!!!!! Moderator message : Search