Convert to a Logical Standby Database

hii,
presently i m trying to convert physical standby into logical but i can't understand that this command is execute on standby db or primary db.
ALTER DATABASE RECOVER TO LOGICAL STANDBY <db_name>;

Vaibhav Dixit wrote:
hii all,
Thanks for reply
one more confusion
i have taken 2 parameter in standby initparameter file
db_name = prim
db_unique_name=stan
and execute command
ALTER DATABASE RECOVER TO LOGICAL STANDBY <db_name>;
in this
<db_name> is prim or stan
Vaibhav Dixitfor all check simply the database_role.
select db_unique_name,database_role from v$database;if it is standby then it is standby.

Similar Messages

Can i convert logical standby database to physical standby database

Dear All,
Can i convert a logical standby database to physical standby database?
If yes, what are the steps to follow?
Thanks
Mahipal

I never needed or tested something like this, but below maybe usefull -
Transient Logical Standby
Users can convert a physical standby to a transient logical standby database to effect a rolling database upgrade, and then revert the standby to its original state as a physical standby database once the upgrade is complete - using the KEEP IDENTITY clause. This benefits physical standby users who wish to execute a rolling database upgrade without investing in redundant storage otherwise needed to create a logical standby database.
http://www.oracle.com/technology/deploy/availability/htdocs/DataGuardOverview.html
But opposite is documented - http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm#BEIGJCAC
best regards.

How to convert logical standby database to Physical Standby Database

Hi,
Does anyone know how to convert logical standby database(10.2.0.3) to Physical Standby Database(10.2.0.3)? Is this possible? If so,please give me steps for it.
Thanks.
Regards,
RJ.

I don't believe this to be possible. One of the steps invloved in the creation of a logical standby is the following:
ALTER DATABASE OPEN RESETLOGS;
This makes the logical standby a different incarnation of the db from the primary.
A physical standby is a binary copy of a primary db, a logical standby is a completely seperate db that just happens to get sql statements applied to it that are generated from a primary db, but is open read/write.
One avenue, though would be if you had flashback database enabled and you flashed back all the way to when the db was a physical standby and then rolled forward with the archived redo logs.
It's somewhat unlikely you are in that situation, but that is a possibility.
Indeed the 11g snapshot standby does this sort of thing:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/manage_ps.htm#sthref740
jason.
http://jarneil.wordpress.com

Logical Standby Database in NOARCHIVE Mode

Hi,
I have configured a Logical Standby Database for Reporting purposes. A Physical Standby Database is running for MAA. i.e. in case of Role Transition (switch/Failover) the Physical Stdby Db will get the role of the Primary.
The logical standby database is creating a lot of Archive Redologs files, nearly every minute. Redolog files are 50MB and there is no work done in db during the time. I'm NOT using Standby Redolog files.
Is there a need for logical standby database to be in NOARCHIVELOG mode? The Primary is definatley in ARCHIVELOG mode.
Thanks for any responses.
regards
Sahba

hi,
well there are two things to the above:-
1. there was an archive file nearly every minute:
this is due to a db recovery. for some reason, the db was in inconsistent state, after a sudden shutdownof the OS. I was on a test environment, on windows vista, unfortunately. unimportant ... a reboot solved it.
2. Logical standby db in NOARCHIVE MODE when setup for the purpose of Reporting.
As long as the MAA configured for the primary db, such as physical standby db, and a second, the logical standby db setup purely for the purpose of reporting, which then can run with NOARCHIVELOG mode, after converting the physical standby db to logical.
logical standby db uses Streams architecture, so this method brings cost, time and performance advantages to the customer.
regards
Sahba

Error while Creating a Logical Standby Database

Dears
I setup physical standby db. Now trying to convert it to logical standby db by following this link:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm#i92346
When i issue this statement:
ALTER DATABASE RECOVER TO LOGICAL STANDBY orcl2;
I am getting following error:
ORA-00905: missing keyword.
I do not find anything in ALERT.LOG file. The syntax seems to be correct as i carefully copied from the document itself.
Please reply.

Any ideas?

Creating logical standby database

Hi all,
10.2.0.1
Following this link
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm
Where do i need to issue these statements:
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
SQL> ALTER DATABASE RECOVER TO LOGICAL STANDBY db_name;
on physical standby or primary database.
I issued the first stament on primary and second on physical standby .
IN the alert log of standby,i have the following entries.
Wed Jan 20 15:34:28 2010
Converting standby mount to primary mount.
Wed Jan 20 15:34:28 2010
ACTIVATE STANDBY: Complete - Database mounted as primary (treasury)
*** DBNEWID utility started ***
DBID will be changed from 306589979 to new DBID of 330710340 for database
.........................I am trying to create a logical standby database after creating a physical standby database.
It seems standby changed to primary which was not desired.
Thanks

Not tried myself, but you might want to have a look at this URL.
It appears to suggest that you need to change names of datafiles as well as value db_name explcitly on standby.

Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND

Hi All,
I am in confusion how to create logical standby database from primary database using rman active database command.
What i did:-
Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
I done the creation of logical standby database by converting physical standby to logical standby database
I am following the below mentioned doc for the same:
Creating a physical and a logical standby database in a DR environment | Chen Guang&#039;s Blog
Kindly guide me how to work over the same or please provide me the steps of the same.
Thanks in advance.

Thanks for your reply
I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
My primary database pfile is:
pc01prmy.__db_cache_size=83886080
pc01prmy.__java_pool_size=12582912
pc01prmy.__large_pool_size=4194304
pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01prmy.__pga_aggregate_target=79691776
pc01prmy.__sga_target=239075328
pc01prmy.__shared_io_pool_size=0
pc01prmy.__shared_pool_size=134217728
pc01prmy.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.fal_client='PC01PRMY'
*.fal_server='PC01SBY'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_dest_state_3='DEFER'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
My logical standby pfile is:-
pc01ls.__db_cache_size=92274688
pc01ls.__java_pool_size=12582912
pc01ls.__large_pool_size=4194304
pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01ls.__pga_aggregate_target=79691776
pc01ls.__sga_target=239075328
pc01ls.__shared_io_pool_size=0
pc01ls.__shared_pool_size=125829120
pc01ls.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_unique_name='pc01ls'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
Kindly advice over the same

Logical Standby Database and XMLDB

I couldn't find a proper group to post this message and thought I would try here.
I want to set up a Logical Standby Database for our production database server 9.2.0.4.0 with XMLDB. I am having problem with some system tables that were created when I registered some XML schemas.
These tables are in the standby database but Oracle complains the object does not exist.
Any idea?

>
The "may be" is because I have tested flashback of a physical standby to before resetlogs, but not a logical standby.
>
A physical standby keeps the DBID of the primary - a logical standby does not. That is exactly the problem that restricts the reconversion into physical from logical, and you did not encounter that problem.
>
I haven't used "keep identity" but from what I read it relates to "convert to physical" not "flashback database".
>
Exactly. And that is what the OP wants to do: convert to physical (from logical).
You mentioned that this might be possible with flashback.
Problem: During the conversion from physical to logical, the DBID gets changed unless you specify (in 11g) KEEP IDENTITY. This would make it possible to reconvert into phyiscal from logical.
In short: If there is no solution for the changed DBID of the logical standby in order to flashback it into physical as you suggested, then it is not possible .
When I saw your first answer, I thought that you might have a solution in mind in order to solve that obvious problem. Sorry for having bothered you.
Kind regards
Uwe
http://uhesse.wordpress.com

Logical standby database to physical standby database

I already start my logical standby database and I want to return it again to physical standby database. So what should I do?

>
The "may be" is because I have tested flashback of a physical standby to before resetlogs, but not a logical standby.
>
A physical standby keeps the DBID of the primary - a logical standby does not. That is exactly the problem that restricts the reconversion into physical from logical, and you did not encounter that problem.
>
I haven't used "keep identity" but from what I read it relates to "convert to physical" not "flashback database".
>
Exactly. And that is what the OP wants to do: convert to physical (from logical).
You mentioned that this might be possible with flashback.
Problem: During the conversion from physical to logical, the DBID gets changed unless you specify (in 11g) KEEP IDENTITY. This would make it possible to reconvert into phyiscal from logical.
In short: If there is no solution for the changed DBID of the logical standby in order to flashback it into physical as you suggested, then it is not possible .
When I saw your first answer, I thought that you might have a solution in mind in order to solve that obvious problem. Sorry for having bothered you.
Kind regards
Uwe
http://uhesse.wordpress.com

Updating tables in logical standby database

Dear DBAs,
Is it possible to update non replicated tables in the logical standby database, but have the same schema name?
"Alter session disable guard" works only for the current session, in fact i want it for all connected users whithout stopping the standby apply ?

hi,
Let's say in the primary database i have 10 tables, and using the RMAN i have created a Ph. standby database and then converted to a logical.
so now i have the same schema and the same tables in these servers.
the fact of using logical stdby is to be able to make DML transactions.
so the issue is that from the 10 tables i need 9 tables to be replicated and the last one will not be replicated, so the application connected to the log. stdby will use only this table to update the user record(login date, logout date...bla bla bla).
the problem is that when the user will connect to the database the application will insert a record like "insert into SCHEMANAME.tablename....."
the problem is that the schema name is added into the insert statement.
Thank you in advance

Problem building logical standby database

Hi all,
i am trying to build a logical standby database on platform Sun OS 10/Oracle 10gR2. I am following the Oracle document http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm#BEIGHEIA
I have created a physical standby database and converting it to a logical standby database. I ensured that my physical Standby is in Sync with primary.
Procedure DBMS_LOGSTDBY.BUILD executes successfully on primary.
The problem is that the command *'alter database recover to logical standby test;'* DOESN'T END. No error in archive log. I have identified the archived redo log that contains the LogMiner dictionary and the starting SCN and applied that archive log on standby. Still the the above command doesn't end.
Any Help is appreciated.

SQL> alter database recover to logical standby m2test;
This command doesn't return an sql> prompt. Alert log says it is waiting for log sequence 25. The command is running is for more than 5 hours, but still not competed.
Alertlog:
Thu Feb 5 22:14:25 2009
alter database recover to logical standby m2test
Thu Feb 5 22:14:25 2009
Media Recovery Start: Managed Standby Recovery (mtest)
Thu Feb 5 22:14:25 2009
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 2 processes
Media Recovery Waiting for thread 1 sequence 25
Document says :-
If a dictionary build is not successfully performed on the primary database, this command will never complete.
But the dictionary build on primary is successful.
SQL> execute dbms_logstdby.build;
PL/SQL procedure successfully completed.
I used the following queries and to find which archive log contains dictionary build and made sure that the log archive sequence 22 is applied on standby.
SQL> SELECT NAME FROM V$ARCHIVED_LOG
WHERE (SEQUENCE#=(SELECT MAX(SEQUENCE#)
FROM V$ARCHIVED_LOG
WHERE DICTIONARY_BEGIN = 'YES' AND STANDBY_DEST='NO')); 2 3 4
NAME
/oradata/mtest/archive/mtest_1_22_677975686.arc
SQL> SELECT MAX(FIRST_CHANGE#) FROM V$ARCHIVED_LOG
WHERE DICTIONARY_BEGIN='YES'; 2
MAX(FIRST_CHANGE#)
177407
SQL>
Edited by: user592715 on Feb 6, 2009 3:22 PM

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

How to delete the foreign archivelogs in a Logical Standby database

How do I remove the foreign archive logs that are being sent to my logical standby database. I have files in the FRA of ASM going back weeks ago. I thought RMAN would delete them.
I am doing hot backups of the databases to FRA for both databases. Using ASM, FRA, in a Data Guard environment.
I am not backing up anything to tape yet.
The ASM FRA foreign_archivelog directory on the logical standby FRA keeps growing and nothing is get deleted when
I run the following command every day.
delete expired backup;
delete noprompt force obsolete;
Primary database RMAN settings (Not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD' CONNECT IDENTIFIER 'WMRTPRD_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD2' CONNECT IDENTIFIER 'WMRTPRD2_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD3' CONNECT IDENTIFIER 'WMRTPRD3_DG';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
Logical standby database RMAN setting (not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
How do I cleanup/delete the old ASM foreign_archivelog files?

OK, the default is TRUE which is what it is now
from DBA_LOGSTDBY_PARAMETERS
LOG_AUTO_DELETE TRUE SYSTEM YES
I am not talking about deleting the Archive logs files for the Logical database that it is creating, but the Standby archive log files being sent to the Logical Database after they have been applied.
They are in the alert log as follows under RFS LogMiner: Registered logfile
RFS[1]: Selected log 4 for thread 1 sequence 159 dbid -86802306 branch 763744382
Thu Jan 12 15:44:57 2012
*RFS LogMiner: Registered logfile [+FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297] to LogM*
iner session id [1]
Thu Jan 12 15:44:58 2012
LOGMINER: Alternate logfile found. Transition to mining archived logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/
foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297
LOGMINER: End mining logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/threa
d_1_seq_158.322.772386297
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 159, +DG1/wmrtprd2/onlinelog/group_4.284.771760923

Sql Apply issue in logical standby database--(10.2.0.5.0) x86 platform

Hi Friends,
I am getting the following exception in logical standby database at the time of Sql Apply.
After run the command alter database start logical standby apply sql apply services start but after few second automatically stop and getting following exception.
alter database start logical standby apply
Tue May 17 06:42:00 2011
No optional part
Attempt to start background Logical Standby process
LOGSTDBY Parameter: MAX_SERVERS = 20
LOGSTDBY Parameter: MAX_SGA = 100
LOGSTDBY Parameter: APPLY_SERVERS = 10
LSP0 started with pid=30, OS id=4988
Tue May 17 06:42:00 2011
Completed: alter database start logical standby apply
Tue May 17 06:42:00 2011
LOGSTDBY status: ORA-16111: log mining and apply setting up
Tue May 17 06:42:00 2011
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 4, Transaction Chunk Size = 201
LOGMINER: Memory Size = 100M, Checkpoint interval = 500M
Tue May 17 06:42:00 2011
LOGMINER: krvxpsr summary for session# = 1
LOGMINER: StartScn: 0 (0x0000.00000000)
LOGMINER: EndScn: 0 (0x0000.00000000)
LOGMINER: HighConsumedScn: 2660033 (0x0000.002896c1)
LOGMINER: session_flag 0x1
LOGMINER: session# = 1, preparer process P002 started with pid=35 OS id=4244
LOGSTDBY Apply process P014 started with pid=47 OS id=5456
LOGSTDBY Apply process P010 started with pid=43 OS id=6484
LOGMINER: session# = 1, reader process P000 started with pid=33 OS id=4732
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1417, X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Turning ON Log Auto Delete
Tue May 17 06:42:01 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1418, X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
LOGSTDBY Apply process P008 started with pid=41 OS id=4740
LOGSTDBY Apply process P013 started with pid=46 OS id=7864
LOGSTDBY Apply process P006 started with pid=39 OS id=5500
LOGMINER: session# = 1, builder process P001 started with pid=34 OS id=4796
Tue May 17 06:42:02 2011
LOGMINER: skipped redo. Thread 1, RBA 0x00058a.00000950.0010, nCV 6
LOGMINER: op 4.1 (Control File)
Tue May 17 06:42:02 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1419, X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1420, X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1421, X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Analyzer process P004 started with pid=37 OS id=5096
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Apply process P007 started with pid=40 OS id=2760
Tue May 17 06:42:03 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY Apply process P012 started with pid=45 OS id=7152
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1422, X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1423, X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1424, X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
LOGMINER: session# = 1, preparer process P003 started with pid=36 OS id=5468
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
Tue May 17 06:42:04 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1425, X:\TANVI\ARCHIVE2\ARC01425_0748170313.001
LOGSTDBY Apply process P011 started with pid=44 OS id=6816
LOGSTDBY Apply process P005 started with pid=38 OS id=5792
LOGSTDBY Apply process P009 started with pid=42 OS id=752
Tue May 17 06:42:05 2011
krvxerpt: Errors detected in process 34, role builder.
Tue May 17 06:42:05 2011
krvxmrs: Leaving by exception: 600
Tue May 17 06:42:05 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY status: ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_lsp0_4988.trc:
ORA-12801: error signaled in parallel query server P001
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
LogMiner process death detected
Tue May 17 06:42:06 2011
logminer process death detected, exiting logical standby
LOGSTDBY Analyzer process P004 pid=37 OS id=5096 stopped
LOGSTDBY Apply process P010 pid=43 OS id=6484 stopped
LOGSTDBY Apply process P008 pid=41 OS id=4740 stopped
LOGSTDBY Apply process P012 pid=45 OS id=7152 stopped
LOGSTDBY Apply process P014 pid=47 OS id=5456 stopped
LOGSTDBY Apply process P005 pid=38 OS id=5792 stopped
LOGSTDBY Apply process P006 pid=39 OS id=5500 stopped
LOGSTDBY Apply process P007 pid=40 OS id=2760 stopped
LOGSTDBY Apply process P011 pid=44 OS id=6816 stopped
Tue May 17 06:42:10 2011

Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []submit an SR to ORACLE SUPPORT.
refer these too
*ORA-600/ORA-7445 Error Look-up Tool [ID 153788.1]*
*Bug 6022014: ORA-600 [KRVXBPX20] ON LOGICAL STANDBY*

Logical Standby databases

Hi,
When we say "Logical Standby Databases are logically identical to primary databases although the physical organization and structure of the data can be different." what does it exactly means?
Does it mean that in logical standby tablespace name, schema name, table name, column names etc can be different and still has the same data as primary?
Does it mean that we can exclude indexes and constraints as present in primary?
Only the data should match with primary word by word, value by value?
I am asking this as i have never worked in a logical standby database but i seriously want to know.
Please answer.
Regards,
SID

Physical standby differs from logical standby:
Physical standby schema matches exactly the source database.
Archived redo logs and FTP'ed directly to the standby database which is always running in "recover" mode. Upon arrival, the archived redo logs are applied directly to the standby database.
Logical standby is different from physical standby:
Logical standby database does not have to match the schema structure of the source database.
Logical standby uses LogMiner techniques to transform the archived redo logs into native DML statements (insert, update, delete). This DML is transported and applied to the standby database.
Logical standby tables can be open for SQL queries (read only), and all other standby tables can be open for updates.
Logical standby database can have additional materialized views and indexes added for faster performance.
Installing Physical standbys offers these benefits:
An identical physical copy of the primary database
Disaster recovery and high availability
High Data protection
Reduction in primary database workload
Performance Faster
Installing Logical standbys offer:
Simultaneous use for reporting, summations and queries
Efficient use of standby hardware resources
Reduction in primary database workload
Some limitations on the use of certain datatypes

Convert to a Logical Standby Database

Similar Messages

Maybe you are looking for